Orion 15RTC User Manual

Installation and User's Guide

PREMIUM NORMAL ASPECT RATIO SERIES

(15 inches)

http://www.orionimages.com

All contents of this document may change without prior notice, and actual product appearance may differ from that depicted herein

http://www.orionimages.com

1. SAFETY INSTRUCTION

Follow this safety instruction to use the monitor properly and prevent the damages.

This safety instruction has “Warning” & “Caution” as below

Installation and User's Guide

Warning -

Caution -

If the user does not follow this instruction,
it may cause the serious damage to the user.

If the user does not follow this instruction, it may cause the slight
damage to the user or cause some damages to the monitor.

Keep this user’s guide book for later use.

Warning

Never remove the back over and
touch the inside of the monitor.
If you need a service, please
contact the service center.

Never push objects of any kind into
this product as they may result in
a risk of fire or electric shock.

Keep away the monitor from the
direct sunlight and a heating appliance.

Connect the power code to the wall
outlet tightly. If the power code or plug
are defective and the wall outlet is not
tight, please do not use them.

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

2

http://www.orionimages.com

Warning

Installation and User's Guide

Do not install this monitor on the outside
and near water. If may cause damage to
the product, electric shock and fire.

When lightning and thundering, unplug the
monitor from the wall outlet and never touch
it.

When smoking and noising from the monitor,
unplug the product from the wall outlet and
contact a service center.

For cleaning do not use liquid cleaners.
Never touch the power plug with wet-hands.

Unplug this product from the wall outlet, when
It does not operate for a long time.

:

:

A

W

RNN

A

W

R

Do not open this product as it contains high voltage inside.
It may create an electric shock.
It the user disassembles and remove the back cover, it does not make sure
to make up for the damages and do a service and exchange the monitor.

How to fix

N

G

IIN

G

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

3

http://www.orionimages.com

Cautions

Installation and User's Guide

Install this monitor some distance
From the wall and do not install unless
Proper ventilation is provided.

The openings must not be blocked by
curtain, rug or other similar surface.

Before carrying the monitor, tum it off and
Unplug the signal cables and the power code
From the wall outlet.

Place this product on a stable place.
If not, it may fall, causing serious
Damages to the monitor and people.

When carrying this monitor, be careful
not to damage the panel and drop it
It may cause some trouble.

Take the power plug out from the wall
outlet.
Do not pull the cable. It may snap the inner­wires and cause overheating and fire.

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

4

http://www.orionimages.com

Cautions

Installation and User's Guide

Install this monitor about 50cm far from
the eyes and an angle of 0~15 degrees
below eyes. Too close installation may
cause having weak sight.

For cleaning, unplug the monitor from the
Wall outlet. Do net use the liquid cloth.
Use the soft cloth.

Do not press the LCD panel with hands or
the sharpened material hardly.

Do not use the chemical liquid for cleaning.
It may cause fading and breakage.

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

5

http://www.orionimages.com

g

Installation and User's Guide

2. FCC RF INTERFERENCE STATEMENT

N

TE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee tha
particular installation. If this equipment does cause harmful interference to radio or television reception
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio, TV technician for help.
Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly approved by the
grantee or manufacturer could void the users authority to operate such equipment.

t interfe

rence will not occur in a

DOC COMPLIANCE NOTICE

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
set out in the radio interference re

ulation of Canadian Department of communications.

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

6

http://www.orionimages.com

Installation and User's Guide

TABLE OF CONTENTS

1. SAFETY INSTRUCTION
1-1 Warning

1-2 Caution

2. FCC STATEMENT

3. INSTALLATION
3-1 Parts
3-2 How to Install

4. OSD MENU SETTING
5-1 Mode Setting
5-2 Menu Setting (VIDEO, S-VIDEO, HDMI Mode)
5-3 Menu Setting (VGA Mode)

5. FEATURES

6. LIMITED WARRANTY

7. TROUBLESHOOTING

2

6

8

12

26

27

27

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

7

http://www.orionimages.com

3. INSTALLATION

3-1 Parts

Installation and User's Guide

LCD Monitor

Adapter

* Adapter is attached to the back of product

Battery User Manual

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

VGA Cable Power Cable

Remote Controller

8

http://www.orionimages.com

3-2 How to Install

KEY BUTTON

Installation and User's Guide

SHORT KEY FUNCTION

OSD Key Function

Activates and exit the OSD
Select input source, and select the OSD menu
Move the OSD menu and auto adjustment of RGB source
Decrease the level of volume and move the previous menu
Increase the level of volume and select rhe OSD menu

Turns the power ON or OFF.There will be a few seconds
delay before the display appears.The power LED (next to the
power switch) lights with green when the power is turned ON.
The power is turned o ff by pressing the power switch again
and the power LED goes red.

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

9

http://www.orionimages.com

CONNECTION

1 2 3 4 5 6 7 8

Installation and User's Guide

1

HDMI

HDMI signal input

2

VGA

VGA (PC RGB) signal input

3 7

DC12V

DC adapter input

4 8

VIDEO-1 IN / OUT

VIDEO-1 signal input / looping out

5

VIDEO-2 IN / OUT

VIDEO-2 signal input / looping out

6

S-VIDEO

S-VIDEO signal input

AUDIO (VIDEO)

Stereo audio input for VIDEO or S-VIDEO

AUDIO (PC)

Stereo audio input for VGA

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

10

http://www.orionimages.com

REMOTE CONTROLLER

POWER MUTE

VIDEO1 VIDEO2 S-VIDEO

VGA AUTO COLOR TEMP

A

B

DVI HDMI1 COMPONENT

HDMI2 S.SET

SCAN MODE PIP

VOL- VOL+

MENU/EXIT

P.INPUT P.LOCATION

P.SWAP STILL

KEY LOCK

P.SIZE

Installation and User's Guide

MODE SELECT MENU

A

VIDEO1

Select VIDEO1 mode

S-VIDEO

Select S-VIDEO mode

DVI

Select DVI mode

COMPONENT

Select COMPONENT mode

OSD CONTROL MENU

B

POWER

Turn ON / OFF the monitor

AUTO

Auto adjust position of the screen (in VGA mode)

SCAN MODE

Select the scan mode of the screen

MENU / EXIT

Activate and exit the OSD menu

STILL

Freeze the current image

VIDEO2

Select VIDEO2 mode

VGA (RGB)

Select VGA mode

HDMI1

Select HDMI1 mode

HDMI2

Select HDMI2 mode

MUTE

Turn ON / OFF the sound

COLOR TEMPERATURE

Select color temperature of the screen

VOL- / VOL+

Increase / Decrease the volume level

KEY LOCK

Locking the button (Prevent operation)

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

11

http://www.orionimages.com

4. OSD MENU SETTING

5-1 Mode Setting

Installation and User's Guide

VIDEO1
VIDEO2
S-VIDEO

RGB PC

√

INPUT

1.

Use SOURCE button and then / button to move the
source.

2.

Press the button to select the source.

3.

Press the MENU/EXIT button to exit the INPUT menu.

DVI
HDMI

▼/▲:MOVE ▶:ENTER

Inputs can be set to VIDEO1, VIDEO2, S-VIDEO, RGB PC, DVI, HDMI1, HDMI2 & COMPONENT mode

VIDEO1

Select VIDEO1 mode

S-VIDEO

Select S-VIDEO mode

HDM

Select HDMI mode

VIDEO2

Select VIDEO2 mode

RGB PC

Select VGA mode

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

12

http://www.orionimages.com

Installation and User's Guide

5-2 Menu Setting (VIDEO, S-VIDEO, HDMI Mode)

PICTURE

1.

PICTURE

PICTURE

CONTRAST
BRIGHTNESS

SCREEN

COLOR
TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

60%
50%
50%
50%
50%

▶

50%
50%
50%

CONTRAST : Adjust visual color contrast
COLOR : Adjust visual color of screen TINT : Adjust tint of color
SHARPNESS : Adjust sharpness of screen COLOR TEMP : Switch color temperature of screen

Press the MENU/EXIT key to access menu.

2.

Use the & arrow to highlight a selection.

3.

Press the /SELECT to choose an item.

4.

Use the & arrow to highlight a selection.

5.

Use the & arrow to adjust the setting on a
selected item.

BRIGHTNESS : Adjust color brightness

CONTRAST BRIGHTNESS

PICTURE

PICTURE

CONTRAST

BRIGHTNESS

SCREEN

COLOR
TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

60%

50%
50%
50%
50%

▶

50%
50%
50%

PICTURE

PICTURE

CONTRAST

BRIGHTNESS

SCREEN

COLOR
TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

60%

50%

50%
50%
50%

▶

50%
50%
50%

Default setting is 60% and adjustable from range of 0 to 100% Default setting is 50% and adjustable from range of 0 to 100%

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

13

http://www.orionimages.com

COLOR TINT

Installation and User's Guide

PICTURE

PICTURE

CONTRAST
BRIGHTNESS

SCREEN

COLOR

TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

60%
50%

50%

50%
50%

▶

50%
50%
50%

PICTURE

PICTURE

CONTRAST
BRIGHTNESS

SCREEN

COLOR

TINT

SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

60%
50%
50%

50%

50%

▶

50%
50%
50%

Default setting is 50% and adjustable from range of 0 to 100% Default setting is 50% and adjustable from range of 0 to 100%

SHARPNESS COLOR TEMP

PICTURE

PICTURE

CONTRAST
BRIGHTNESS

SCREEN

COLOR
TINT

SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

60%
50%
50%
50%

50%

▶

50%
50%
50%

PICTURE

PICTURE

CONTRAST
BRIGHTNESS

SCREEN

COLOR
TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

60%
50%
50%
50%
50%

▶

50%
50%
50%

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

Default setting is 50% and adjustable from range of 0 to 100% Default setting is MEDIUM and switch to WARM, USER and

COOL color temperature options
USER - Default setting of RED, GREEN, BLUE is 50% and

adjustable from range of 0 to 100%

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

14

http://www.orionimages.com

SCREEN

SCREEN

PICTURE

SCAN MODE

SCREEN

SETUP

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

◀ UNDER

SCAN MODE : Select the scan mode of the screen

▶

Installation and User's Guide

1.

Press the MENU/EXIT key to access menu.

2.

Use the & arrow to highlight a selection.

3.

Press the /SELECT to choose an item.

4.

Use the & arrow to highlight a selection.

5.

Use the & arrow to adjust the setting on a
selected item.

SCAN MODE

SCREEN

PICTURE

SCAN MODE

SCREEN

SETUP

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

◀ UNDER

▶

Default setting is UNDER and switch to OVER, 16:9 and FULL
scan mode options

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

15

http://www.orionimages.com

Installation and User's Guide

SETUP

1.

SETUP

PICTURE

INPUT
LANGUAGE

SCREEN

SOUND MUTE
BUTTON LOCK
NOISE REDUCTION

SETUP

OSD TIME
DEFAULT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

◀ VIDEO1
◀ ENGLISH
◀ OFF
◀ OFF
◀ ON

▶

▶
▶
▶
▶
▶

15s

INPUT : Select an input source for main screen LANGUAGE : Set to different language mode
SOUND MUTE : Turn on/off the sound BUTTON LOCK : Locking the button (Prevent operation)
NOISE REDUCTION : Set a noise reduction mode OSD TIME : Set a time duration of OSD menu
DEFAULT : Factory default setting

Press the MENU/EXIT key to access menu.

2.

Use the & arrow to highlight a selection.

3.

Press the /SELECT to choose an item.

4.

Use the & arrow to highlight a selection.

5.

Use the & arrow to adjust the setting on a
selected item.

INPUT LANGUAGE

SETUP

PICTURE

INPUT

LANGUAGE

SCREEN

SOUND MUTE
BUTTON LOCK
NOISE REDUCTION

SETUP

OSD TIME
DEFAULT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

◀ VIDEO1

◀ ENGLISH
◀ OFF
◀ OFF
◀ ON

▶

▶

▶
▶
▶
▶

15s

Inputs can be set to VIDEO1, VIDEO2, S-VIDEO, RGB PC,
and HDMI mode

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

PICTURE

INPUT

LANGUAGE

SCREEN

SOUND MUTE
BUTTON LOCK
NOISE REDUCTION

SETUP

OSD TIME
DEFAULT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

Default setting is ENGLISH and language setting can be set
to ITALIAN, FRENCH, SPANISH and GERMAN

SETUP

◀ VIDEO1

◀ ENGLISH

◀ OFF
◀ OFF
◀ ON

▶

▶

▶

▶
▶
▶

15s

16

http://www.orionimages.com

Installation and User's Guide

SOUND MUTE BUTTON LOCK

SETUP

PICTURE

INPUT
LANGUAGE

SCREEN

SOUND MUTE

BUTTON LOCK
NOISE REDUCTION

SETUP

OSD TIME
DEFAULT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

◀ VIDEO1
◀ ENGLISH

◀ OFF

◀ OFF
◀ ON

▶

▶
▶

▶

▶
▶

15s

Default setting is OFF and switch to ON sound mute option

PICTURE

SCREEN

SETUP

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

Default setting is OFF and switch to ON button lock option
Release the lock - Press KEY LOCK button on the remote control

- Press & button on the key pad

NOISE REDUCTION OSD TIME

SETUP

PICTURE

SCREEN

SETUP

RGB

SETUP

INPUT
LANGUAGE
SOUND MUTE
BUTTON LOCK

NOISE REDUCTION

OSD TIME
DEFAULT

◀ VIDEO1
◀ ENGLISH
◀ OFF
◀ OFF

◀ ON

▶

▶
▶
▶
▶

▶

15s

PICTURE

SCREEN

SETUP

RGB

SETUP

SETUP

INPUT
LANGUAGE
SOUND MUTE

BUTTON LOCK

NOISE REDUCTION
OSD TIME
DEFAULT

SETUP

INPUT
LANGUAGE
SOUND MUTE
BUTTON LOCK
NOISE REDUCTION

OSD TIME

DEFAULT

◀ VIDEO1
◀ ENGLISH
◀ OFF

◀ OFF

◀ ON

▶

◀ VIDEO1
◀ ENGLISH
◀ OFF
◀ OFF
◀ ON

▶

▶
▶
▶

▶

▶

15s

▶
▶
▶
▶
▶

15s

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

Default setting is ON and switch to OFF noise reduction option

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

Default setting is 15s and adjustable from range of 5 to 30s

17

http://www.orionimages.com

DEFAULT

SETUP

PICTURE

INPUT
LANGUAGE

SCREEN

SOUND MUTE
BUTTON LOCK
NOISE REDUCTION

SETUP

OSD TIME

DEFAULT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

◀ VIDEO1
◀ ENGLISH
◀ OFF
◀ OFF
◀ ON

▶

DEFAULT is set OSD menu to factory default

Installation and User's Guide

▶
▶
▶
▶
▶

15s

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

18

http://www.orionimages.com

5-3 Menu Setting (VGA Mode)

PICTURE

PICTURE

PICTURE

CONTRAST
BRIGHTNESS

SCREEN

COLOR
TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

CONTRAST : Adjust visual color contrast
COLOR TEMP : Switch color temperature of screen

60%
50%
50%

50%
50%

▶

50%
50%
50%

Installation and User's Guide

1.

Press the MENU/EXIT key to access menu.

2.

Use the & arrow to highlight a selection.

3.

Press the /SELECT to choose an item.

4.

Use the & arrow to highlight a selection.

5.

Use the & arrow to adjust the setting on a
selected item.

BRIGHTNESS : Adjust color brightness

CONTRAST BRIGHTNESS

PICTURE

PICTURE

CONTRAST

BRIGHTNESS

SCREEN

COLOR
TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

60%

50%
50%

50%
50%

▶

50%
50%
50%

PICTURE

PICTURE

CONTRAST

BRIGHTNESS

SCREEN

COLOR
TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

60%

50%

50%

50%
50%

▶

50%
50%
50%

Default setting is 60% and adjustable from range of 0 to 100% Default setting is 50% and adjustable from range of 0 to 100%

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

19

http://www.orionimages.com

COLOR TEMP

PICTURE

PICTURE

CONTRAST
BRIGHTNESS

SCREEN

COLOR
TINT
SHARPNESS

SETUP

COLOR TEMP ◀ MEDIUM

RED

RGB

GREEN

SETUP

BLUE

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

60%
50%
50%

50%
50%

▶

50%
50%
50%

Default setting is MEDIUM and switch to WARM, USER and
COOL color temperature options

USER - Default setting of RED, GREEN, BLUE is 50% and
adjustable from range of 0 to 100%

Installation and User's Guide

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

20

http://www.orionimages.com

SETUP

SETUP

PICTURE

INPUT
LANGUAGE

SCREEN

SOUND MUTE
BUTTON LOCK
NOISE REDUCTION

SETUP

OSD TIME
DEFAULT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

This function of each menu is listed page 16
Please refer to page 16 for SETUP menu

◀ VIDEO1
◀ ENGLISH
◀ OFF
◀ OFF
◀ ON

▶

Installation and User's Guide

Press the MENU/EXIT key to access menu.

1.

▶
▶
▶
▶
▶

15s

Use the & arrow to highlight a selection.

2.
Press the /SELECT to choose an item.

3.
Use the & arrow to highlight a selection.

4.
Use the & arrow to adjust the setting on a

5.
selected item.

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

21

http://www.orionimages.com

Installation and User's Guide

RGB SETUP

Press the MENU/EXIT key to access menu.

RGB SETUP

PICTURE

H-POSITION
V-POSITION

SCREEN

CLOCK
PHASE
AUTO ADJUST

SETUP

POWER SAVING
AUTO REPEAT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

▶
◀ OFF
◀ OFF

100%

▶
▶

H-POSITION : Adjust horizontal position of monitor V-POSITION : Adjust vertical position of monitor
CLOCK : Adjust clock of monitor PHASE : Adjust phase of monitor
AUTO ADJUST : Auto adjust position of screen POWER SAVING : Power saving mode
AUTO REPEAT : Adjust auto repeat of monitor

1.
Use the & arrow to highlight a selection.

2.

0%
0%
0%

Press the /SELECT to choose an item.

3.
Use the & arrow to highlight a selection.

4.
Use the & arrow to adjust the setting on a

5.
selected item.

H-POSITION V-POSITION

RGB SETUP

PICTURE

H-POSITION

V-POSITION

SCREEN

CLOCK
PHASE
AUTO ADJUST

SETUP

POWER SAVING
AUTO REPEAT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

▶
◀ OFF
◀ OFF

100%

0%
0%
0%

▶
▶

Can be set between 0 to 100% horizontal position of monitor
by manually

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

PICTURE

H-POSITION

V-POSITION

SCREEN

CLOCK
PHASE
AUTO ADJUST

SETUP

POWER SAVING
AUTO REPEAT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

Can be set between 0 to 100% vertical position of monitor
by manually

RGB SETUP

▶
◀ OFF
◀ OFF

100%

0%

0%
0%

▶
▶

22

http://www.orionimages.com

CLOCK PHASE

Installation and User's Guide

RGB SETUP

PICTURE

H-POSITION
V-POSITION

SCREEN

CLOCK

PHASE
AUTO ADJUST

SETUP

POWER SAVING
AUTO REPEAT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

▶
◀ OFF
◀ OFF

100%

0%

0%

0%

▶
▶

RGB SETUP

PICTURE

H-POSITION
V-POSITION

SCREEN

CLOCK

PHASE

AUTO ADJUST

SETUP

POWER SAVING
AUTO REPEAT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

Can be set between 0 to 100% phase of monitor by manuallyCan be set between 0 to 100% clock of monitor by manually

AUTO ADJUST POWER SAVING

PICTURE

SCREEN

SETUP

RGB

SETUP

RGB SETUP

H-POSITION
V-POSITION
CLOCK
PHASE

AUTO ADJUST

POWER SAVING
AUTO REPEAT

▶

◀ OFF
◀ OFF

100%

0%
0%
0%

▶
▶

PICTURE

SCREEN

SETUP

RGB

SETUP

RGB SETUP

H-POSITION
V-POSITION
CLOCK
PHASE
AUTO ADJUST

POWER SAVING

AUTO REPEAT

▶
◀ OFF
◀ OFF

▶

◀ OFF

◀ OFF

100%

0%
0%

0%

▶
▶

100%

0%
0%
0%

▶

▶

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

Default setting is OFF and switch to ON power saving modeAuto adjust position and image of screen

23

http://www.orionimages.com

AUTO REPEAT

RGB SETUP

PICTURE

H-POSITION
V-POSITION

SCREEN

CLOCK
PHASE
AUTO ADJUST

SETUP

POWER SAVING

AUTO REPEAT

RGB

SETUP

▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*

▶
◀ OFF

◀ OFF

100%

▶

▶

Default setting is OFF and switch to ON auto repeat mode

Installation and User's Guide

0%
0%
0%

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

24

http://www.orionimages.com

VGA / HDMI Mode Tables

VGA Mode

Installation and User's Guide

MODE

VGA

SVGA 800X600 50 / 60 / 72 / 75

XGA 1024X768 50 / 60 / 75

RESOLUTION VERTICAL FREQUENCY (Hz)

720X400 70
640X480 60 / 72 75

HDMI Mode

RESOLUTION VERTICAL FREQUENCY (Hz)MODE
EDTV 480i
EDTV 576i

SDTV 480p
SDTV 576p 720X576 60
HDTV 720p 1280X720 50 / 60

HDTV 1080i 1920X1080 30 / 25

HDTV 1080p 1920X1080 50 / 60

720X480 30
720X576 25
720X480 60

Note : Not all resolutions generated by your video source are available on the monitor.

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

25

http://www.orionimages.com

5. FEATURE

Installation and User's Guide

General Features

Screen Size 15.0 inches

Resoluti on 1024*768 pixels

Pixel Pitch 0.297*0.297 mm

Brightness 250 cd/m^2

Displa y

Interface

Audio Built in Speak ers Y (1W*2)

ter Remote Control Y

Transmit

Special

Features

Dimension Outline Dim ension (w Stand) 13.7

Cabinet

Power

Circumstance

Mounts

Contrast R atio 700:1

Aspect Rati o 4:3

Viewing Angle (H/V) 170/160 degrees

Displa y Color 16.2 millio n

Response Time 8 ms

Video Syste m NTSC/PAL

Panel Life Time (hours) 30,000 hours

Video In/Out (BNC Type) 2/2

S-Video In/Out 1/0

VGA In (15Pin D-Sub) 1

HDMI In 1

Audio In (RCA Type) 1

PC Stereo In 1

Filter Type 3D Comb Filter

Deinterlacing Y

Trigger Source Switching N

LCD Protection Gl ass Y

Noise reductio n Y

Auto source sequencing Y

Multi Lingual Language Eng, Spa, Fre, Ger, Ita

Cabinet col or/Base Stand Black/Tilt Back

Cabinet Mat erial Electro-Gal vanized Steel

Consumptio n

Electrical Ratings

Operat ing Temp erature 0~60 celsius

Storage Tempera ture -20~65

VESA Mounts Size 100*100 mm

Ceiling Mo unt CMK-01

Wall WB-5, 10, 30, 31

Rack Mount RMK-08

AC 100~240 V (50/60Hz)

15RTC

*3.2*11.7 inches

<32 watts

DC 12 V

celsius

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

26

http://www.orionimages.com

Installation and User's Guide

6. 2Year Limited Warranty

All ORION Images products carry a limited warranty from ship date against defects in materials and
workmanship. ORION Images is not liable for improper installation that results in damage to mounts,
adapters, display equipment or personal injury.

Contact ORION Images

In the event of missing and/or damage equipment, or technical questions, the following information can
help in the completion of the installation.

Address: 7300 Bolsa Avenue, Westminster, CA 92683
Tel: [phone] / Fax: [phone]
Email: [e-mail]
Website: http://www.orionimages.com

7. TROUBLESHOOTING

* When the following troubles are occurred, follow the trouble shooting. Before contacting a
service center.

Troubleshooting

The screen doesn’t
show up

The screen is too light
or to dark

The screen size is not fit
for the PC signal

The screen color shows
strange in the PC signal

1. Make sure if the power supply is connected property

2. Turn on the power.

3. Select the input signal right for the connected port.

Control the BRIGHTNESS

Press the AUTO key among keys in the front.
(It is used only in the PC signal)

In the FUNCTION menu of OSD menu, perform the
AUTOADJUST.

7300 Bolsa Avenue, Westminster CA 92683
Tel : [phone] / Fax : [phone] / [e-mail]

Troubleshooting Tip

27