Oricom SC910 User Manual

1

Contact details for Oricom Support and Express Warranty Claims in Australia

Oricom International Pty Ltd

Unit 1, 4 Sovereign Place

South Windsor, NSW 2756 Australia

(Monday to Friday 8am to 6pm AEST)

Email: [e-mail]

Phone: [phone] or 02 4574 8888

Web: www.oricom.com.au

Fax: [phone]

Contact details for New Zealand

Email: [e-mail]

Phone: [phone]

(Monday to Friday 10am to 8pm NZST)

Web: www.oricom.co.nz

Ref: 23012014

Baby Monitor

Secure 910

USER GUIDE

2

KEEP THIS USER GUIDE FOR FUTURE REFERENCE

Always retain your proof of purchase in case of warranty service and register your product

on line at:AUSTRALIA: www.coricom.com.au NEW ZEALAND: www.oricom.co.nz

2

TABLE OF CONTENTS

SAFETY INFORMATION 3

YOUR BABY MONITOR 5

GETTING STARTEd 6

OpTIONAL BATTERIES 8

USING YOUR MONITOR 9

pARENT UNIT MENUS 13

TROUBLESHOOTING 17

CARE ANd MAINTENANCE 18

CUSTOMER SUppORT 19

EXpRESS WARRANTY 20

NEEd HELp?

If you need assistance setting up or using your Oricom product
now or in the future, call Oricom Support.

Australia 1300 889 785 or 02 4574 8888

www.oricom.com.au

Mon-Fri 8am – 6pm AEST

New Zealand 0800 67 42 66
www.oricom.co.nz

Mon-Fri 10am – 8pm NZST

SAFETY INFORMATION

3

Important Safety Information

• It is very important that you read the User Guide carefully as it contains detailed
information you will need to get the most from your Oricom baby monitor. If you
have any issues setting up or using your Oricom baby monitor please call our
Customer Support team. Our dedicated local team are more likely to be able to
help you than the retailer where you made your purchase.

• Your Oricom baby monitor is designed to be an aid and should not be used as
a substitute for responsible and proper adult supervision of a child.

• The baby monitor has been designed to provide some added reassurance in the
form of sound transmission for those times when you are not in the same room
as your baby provided you always stay within hearing range of the baby monitor
during use. Your baby monitor is not a medical device, nor a device to prevent
cases of Sudden Infant Death Syndrome (SIDS) or "cot death", and you should
not rely on it for your baby's wellbeing. It is important that you regularly check
on your baby personally.

• Make sure the baby unit, parent unit and mains adaptor cables are kept out
of reach of your baby and other young children at all times, at least one metre
away.

• Never place the baby unit or parent unit inside your baby’s cot, bed or playpen.

• Never cover the parent or baby units with clothes, towels or blankets or any
other item. Never use or place your parent or baby unit in or near moisture or
water (e.g. near bath or pool). Immersing in water could cause electric shock
and even death.

• The installation location plays an important role in ensuring proper operation.
Therefore, maintain a distance of at least one metre from other electronic equip­ment, such as microwave ovens or hi.fi devices, otherwise they could cause
interference. During continual use the baby unit power adaptors may become
warm to the touch. This is normal and should not be a concern.

Warning

Risk of suffocation!

!

Keep all packaging materials and protective foils out of reach of children.

Warning

Do not place the AC Adaptor cable in a high “wear and tear” location. Never use a frayed or

!

compromised cord.

4

SAFETY INFORMATION

Battery safety

• Batteries represent a hazard to health and the environment! They contain toxic,
ecologically hazardous heavy metals. Do not dispose of batteries in a fire as
they may explode. Dispose of batteries according to local regulations, never in
your household rubbish.

• Do not dismantle, cut, open, crush, bend, puncture, or shred cells or batteries.
If a battery leaks, do not let the battery liquid touch skin or eyes. If this happens,
immediately flush the affected areas with water, and seek medical assistance.

• Do not modify, remanufacture, attempt to insert foreign objects into the battery,
or immerse or expose it to water or other liquids. Batteries may explode if dam­aged.

• Improper use or use of unapproved batteries may present a risk of fire, explo­sion, or other hazard, and may invalidate any approval or warranty.

• If you believe the battery is damaged, remove product from the charger and
stop using the product. Contact Oricom for assistance. Never use a damaged
battery.

Disposal

Always dispose of your products at the end of their life in accordance with your lo­cal waste disposal requirements.

Packaging materials all cardboard and paper packaging should be recycled in ac­cordance with your local council waste regulations.

Do you have everything?

Package contents:

• Parent unit (LCD screen)

• Baby unit (camera)

• 3 x AC power adaptors

• User Manual

If any items are missing, please contact Oricom Customer Support.

Prior to use remove all protective packaging and films, and fully unwind all cords.

YOUR BABY MONITOR

5

1. LCD Screen

2. Microphone

3. Music Selection (Zoom in: left) button

4. Zoom (Camera selection in quad
mode) button

5. Motion detection (Zoom in: up) button

6. Talkback (Zoom in: right) button

7. VOX (Zoom in: down) button

8. Brightness down (Menu: left/exit)
button

9. Power (Menu) button

10. Volume up (Menu up) button

1. Antenna

2. Power indicator LED

3. Infrared LEDs

4. Lens

5. Nightlight

6. Nightlight switch

7. Microphone

11. Brightness up (Menu: right/ok)
button

12. Volume down (Menu: down)
button

13. Motion detection indicator LED

14. VOX indicator LED

15. Power indicator LED

16. Speaker

17. Volume indicator LED

18. Battery compartment

19. Holder / Stand

20. Power adaptor connection

8. Speaker

9. Battery compartment

10. Temperature sensor

11. Power On/Off switch

12. Power adaptor connection

6

GETTING STARTEd

1. Camera Setup

1.1 Power supply

a) Connect the small plug of the power adaptor to the baby unit and the other

end to the electrical mains power outlet.

b) To switch on the baby unit, slide the power switch to the ON position. The

power LED will light up.

c) To switch off the baby unit, slide the power switch to the OFF position.

1.2 Batteries

1.3 Connecting and aligning the baby unit

Use only the AC adaptor supplied with the product as other power adaptors could
damage the product. This product is designed for indoor use only.

In case of power failure the baby unit can be fitted with 4 x AAA alkaline bat­teries (not supplied).

To install the batteries use a small screwdriver to open the battery compart­ment on the rear of the camera unit. Leaving the ribbon under the batteries,
insert the batteries observing the correct polarity indicated in the battery com­partment. The ribbon is used for easy removal of batteries.Close the battery
compartment again and secure the screw in place.

Please check and replace these batteries after each power failure or every 12
months.

Position the baby unit with a minimum distance of 1 metre to other electronic
devices to avoid a risk of mutual disturbance. Point the upper section of the
baby unit towards the baby you wish to monitor. The baby unit should be at
least 1 metre away from the baby. Check that the baby is suitably displayed on
the parent unit screen. Adjust the viewing angle by gently rotating the camera
head until the baby is clearly visible.

GETTING STARTEd

2. Parent Unit Setup

2.1 Power supply

a) Connect the small plug of the power adaptor to the socket in the side of the

parent unit and the other end to the electrical mains power outlet.

b) Switch the parent unit on by pressing and holding the power button for 2

seconds.

c) To switch the parent unit off, press and hold the power button for 2 sec-

onds.

NOTE:

The parent unit has been supplied with 2 x AC power adaptors to enable
the parent unit to be conveniently relocated to a second location without
the need for the power adaptor to be moved also.

7