19 Customer Support ..................................................................................... 30
2
About Your Phone
pp
p
Environment & Safety
Power requirements
This product requires an e lectrica l suppl y of 220-2 40 volts, single- phase alterna ting cur rent,
excluding IT installations defined in standard EN 60950.
CAUTION: The electrical network is classified as dangerous acco rding to cr iteria in
the standard EN 60950. The only way to po wer do wn this product is by
unplugging the power supply from the electrical outlet. Ensure the electrical
outlet is located close to the a
CAUTION: Use only the mains adaptor supplied with this eq uipmen t. Incorre ct
adaptor polarity or voltage can seriously damage the unit.
AC Adaptor Base
Input: 240V AC 50Hz
Output: 9V DC 500mA
Battery requirements
Each handset requires two rechargeable Ni-MH batteries, size AAA 1.2V 650mAh (HR10/44).
WARNING: RISK OF EXPLOSION IF BATTERY IS REPLA CED BY A N INCORRECT
TYPE. Never use non-rechargeable batteries. Use recommend ed ty pe supplied
with this
roduct.
• Never use Alkaline or lithium batteries.
• Do not dispose of the batteries in a fire, as they can explode.
• Do not open or mutilate the battery. Released electrolyte is corrosive and can cause damage to
the eyes or skin. It can be toxic if swallowed.
• Avoid contact with metal objects when handling the battery. These objects could short out the
batteries or cause the conductor to overheat resulting in burns.
• Do not attempt to recharge the battery cell by heating it. Sudden release of battery electrolyte can
cause burns or irritation to the eyes or skin.
• Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can
result in leakage or explosion.
• Remove the batteries if you do not plan to use the product for several months at a time.
Warnings
• Avoid exposure of this telephone to moisture or liquid.
• To prevent electric shock, do not open the handset or base cabinet.
• Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging
conductors.
• Do not use the handset in an explosive hazard area such as where there is gas leaking.
• Do not use your telephone during an electrical thunderstorm as it is possible to get an electric
shock. Refer to information contained in the White Pages Directory.
•As there is a slight chance that the telephone could be damaged by an electrical storm, it is
recommended that users unplug the phone from the mains supply and telephone socket during an
electrical storm .
•Follow the local regulations regarding the disposal of your packing materials, exhausted batteries
and used phone. Wherever possible, recycle those materials.
•We advise that this phone should not be used near intensive care medical equipment or by
persons with pacemakers.
• Clean with a dry, soft, lint-free cloth. Never use cleaning agents, particularly aggressive solvents.
• Because the phone works by sending radio signals between base station and handset, wearers of
hearing aids may experience interference in the form of a humming noise.
aratus and is always easily accessible.
AC Adaptor charger
Input: 240V AC 50Hz
Output: 6V DC 150mA
3
About Your Phone
•Your phone can interfere with electrical equipment such as answering machines, TV and radio
sets, clock radios and computers if placed too close. It is recommended that you position the base
unit at least one metre from such appliances.
•This telephone complies with applicable safety requirements for exposure to radio waves (EMR).
The mean power of this telephone does not exceed 20mW limit at which point testing is required.
•The earpiece of the handset may attract small metal objects such as staples and pins. Care
should be taken when placing the handset near these items.
•This telephone is not designed for making emergency telephone calls when the mains power fails.
Always have a corded phone available to be able to make and receive calls to emergency
services if the mains power fails.
•Privacy of communications may not be ensured when using this telephone.
Environmental
• The Ni-Mh batteries supplied with this product may be able to be recycled once they are unable
to recharge during normal operation. Always observe your local Council /State regulati ons
regarding the disposal of you r packag ing mate rials, exhaus ted batte ries, an d old equi pment.
Always recycle where possible.
What’s in the Box?
Pack Contents
Depending on the model you have purchased the pack should contain the following items:-
EC03400-1 EC03400-2 EC03400-3
Number of Base units 1 1 1
Number of cordless handsets 1 2 3
Number of charging pods 0 1 2
Number of AC adaptors 1 1 1
Number of phone line cords 1 1 1
User guide and (Warranty card AUS only) 1 1 1
Handset Rechargeable AAA
Ni-MH Batteries (1.2V 650mAh)
If any of these items are missing, please contact the retailer where you purchased the product
from.
You may expand your ECO3400 by adding more handsets (ECO3450HS). These may be
purchased separately from the retailer where you purchased the product from, or direct from
Oricom (Australia). The ECO3400 can accommodate a total of 4 cordless handsets.
2 4 6
4
About Your Phone
Welcome
This user guide provides you with info rmati on and in struct ion you need to ge t the mos t from your
phone.
HOW TO USE THIS USER GUIDE?
The following symbols are u se d to alert you on im porta nt in form ation .
• Warning: Critical information for
preventing personal injury.
• Caution:Critical information for preventi ng
damage to the product.
• Tip:Information for easier operation.
• Note:Explanatory or critic al inform ation
for carrying out an operation correctly.
NEED MORE HELP?
• See the Troubleshooting section in this user guide on page 29.
• Visit our online helpline: www.oricom.com.au
5
About your phone
THE HANDSET
1 Up Navigation & Call Log k ey
Scroll up menu items
Increase ringer and receiver volume
Enter incoming call log
2 Menu & OK key
Access main menu
Confirm selection/operat ion
3 Redial & More key
Enter redial log
View more record information
4 Talk key & Recall key
Make and receive calls
Send a recall signal
5 End & On/Off key
End current call
Exit menu/operation
Turn handset on/off
6 Down Navigation & Phonebook key
Scroll down menu items
Reduce ringer and receiver volum e
Enter phonebook record review
7 Digit keys
Dial digits
Enter characters
8 Star & Ringer Off key
Dial *
Turn ringer on/off
9 Hash, Keylock , & Pause key
Dial #
Enter a pause
Lock/unlock keypad
10 Speaker key
Turn the speaker on/off
11 Intercom key
Make intercom call
Start conference call
About Your Phone
12 Mu te & Delete key
Mute/un-mute microphone
Delete character or dig it
6
About Your Phone
THE BASE
1
Volume down key
Use to turn the speaker volume do wn.
3
OGM key
Use to playback OGM.
Use to record OGM.
5
Answering Machine On/Off key
Use to turn the answering ma chine
on/off.
7
Stop & Play key
Use to play messages.
Use to stop an operation.
9 Page key
Find handset(s)
Enter registration mode
2
Volume up key
Use to turn the speaker volume up.
4
Memo key
Use to playback memo.
Use to record memo.
6
Rewind & Alert key
Use to skip backward during playback.
Use to turn message alert on/off.
8
Forward & Screen key
Use to skip forward during playback.
Use to turn call screening on/off.
10
Delete key
Use to delete messages.
THE ICONS
Each icon gives you a visual message of what is happening on your handset.
Battery level
Voicemail indicato r
Key lock
Phonebook
Ringer off
Up/Down arrows
7
Call in progress
Caller ID indicator
Microphone Mute
Speaker on
Signal strength
Left/Right arrows
About Your Phone
THE MENUS
Your phone offers a variety of features and functions grouped in the menus.
Browsing the menus
The main menu includes the Phon ebook, Di splay, Sound, Settings, and S ystem menus.
¾ Press to enter the main menu .
¾ Press to enter the inco ming call log.
¾ Press to enter the phonebook.
¾ Press to enter the redial log.
TIP: Use or to navigate the menus.
TIP: Quick Exit. Press and hold to exit from an y menu ins tantl y. All
unconfirmed changes will not be saved.
Taking a glance at the menus
PHONEBOOK DISPLAY
Add Record
Edit Record
Delete
Delete All
SYSTEM INCOMING
Register
Select Base
Delete HS
Change PIN
Low RF Power
Reset
Handset Name
Save
Delete
Delete All
SOUND
Handset
Base
Key Tones
Tones
REDIAL
Save
Delete
SETTINGS
Ans Machine
Auto Answer
Recall
8
Getting Started
:
CONNECTING YOUR PHONE
1. Connect the output plug of the mains
adapter to the bottom of the base
unit.
2. Connect the mains adapt er to a
standard wall outlet.
3. Connect the telephone line cord to
the phone socket at the bottom of
the base unit and the wall phone
socket.
Note: In Australia some phone wall so ckets
are the old “non modular” style. If you
have this type of wall socke t you will need
to purchase a modular converter plug (not
supplied).These can be obtained from
electronic stores.
IMPORTANT NOTE: DO YOU HAVE BROADBAND? If you do y ou must connect an in-line filter (not
supplied) between the telephone socket and your ECO3400 phone base to ensure that your broadband
and phone work properly .E nsure al l phone so ckets in us e have the ir own in-l ine fil ter.
CONNECTING YOUR CHARGERS
* For multi-pack customer only
1. Connect the power adap ter of th e
charger to a standard wall outlet.
Getting Started
CHARGING YOUR HANDSET
WARNING: RISK OF EXPLOSION IF BATTERY IS REPLA CED BY A N INCORRECT
TYPE. Never use non-rechargeable batteries. Use recommend ed ty pe supplied
with this product. Ni-MH batteries must be disposed of in accordan ce with the
applicable waste disposal regulations.
NOTE
Charge the handset(s) for 14 hours before initial use!
CAUTION: Check the batteries polarity when inserting the batteries. Incorrect
polarity may damage the product.
9
:
1. Place the 2 rechargeable batteries
(included) into the ba ttery
compartment.
2. Slide the battery door firmly into
place.
3. Place the handset on th e b ase u nit or
charger for charging.
Getting Started
NOTE
Handset may get warm during initial charge. This is normal. The handset
may take a few seconds to power up.
CHECKING THE BATTERY LEVEL
The battery icon displays the current battery level.
= 100% full = 60% full = 30% full = Empty requires char ging.
If you are on the phone while the battery is nearly flat, you will hear warning tones. Your call may be cut off
shortly after the warning.
WHAT IS STANDBY MODE?
Your phone is in standby mode when it is idle. The standby screen displays the handset name and
number, the signal icon, and the ba ttery ic on.
SETTING YOUR PHONE’S COUNTRY
If you have bought this phone in New Zealand you will need to select your country in order for it to work
properly according to your country’s standards. If you are in Australia you can skip this instruction as the
phone factory default is Australia.
1. After the phone is fully charged press during standby mode.
2. Enter the country code.
Country Code
AUSTRALIA 23
NEW ZEALAND 168
3. Press . Your phone is now ready to use.
CHECKING THE SIGNAL STRENGTH
The signal icon displays the link status between your handset and the base unit. A steady icon
means your handset and the base unit are linked. A flashing icon means your handse t and the base
unit are not linked.
If you move too far away from the base unit while you are on the phone, you will hear warning tones
notifying you that your handset is almost out of range – lost link. Take your handset closer to the base
unit or your call may be cut of f short ly afte r the wa rning.
10
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.