Orenco Systems General Onsite Wastewater User Manual

Orenco

®

| General Onsite Wastewater Products

Product Catalog

®

Orenco

Orenco Systems®, Incorporated

814 Airway Ave., Sutherlin, OR 97479 USA
800-348-9843 • 541-459-4449

www.orenco.com/product_catalogs

Orenco

®

| General Onsite Wastewater Products Catalog

To Our Customers

Thank you for the opportunity to introduce you to the products we design and manufacture for general onsite wastewater
applications.

Whether you need risers and lids, tank adapters, pump basins, effl uent fi lters, splice boxes, or control panels, Orenco’s line of
General Onsite Products offers many advantages. They’re carefully engineered, durable, reliable, and competitively priced. Of
course, we’re also proud of our pre-sales and post-sales technical support, which many people say is the best in the industry.

The purpose of this catalog is to show you the full range of Orenco’s product offerings for general onsite wastewater needs.
Your local distributor and Orenco’s sales staff are ready to assist you with product selection to help you place your order.

In addition to the General Onsite Products shown in this catalog, Orenco sells complete pump packages, advanced treatment
systems, and control panels and monitoring products, as well as effl uent sewer components and supplies. Please call us at
800-348-9843 (toll free) or [phone] (international) or visit www.orenco.com for assistance.

We appreciate your business and look forward to serving you.

Using This Catalog

This catalog is an excellent technical resource for Orenco’s General Onsite Products. It is organized by “product families.” And the
families are organized (roughly) by the “fl ow path” of the system’s wastewater fl ows, starting with risers and lids and ending with
alarm panels and miscellaneous products.

Each section of the catalog covers a specifi c group of products. With products that have several standard options, you’ll fi nd
a sample of our more popular models listed at the end of product descriptions. For a number of key products, you’ll also fi nd
“product code diagrams” at the back of the catalog, under “Product Ordering Information.”

Orenco has thousands of products and product variants. For information on the full range of our standard options, as well as pricing,
contact your Distributor.

Additional Catalogs

Orenco has two additional wastewater catalogs:

• Wastewater Pumping Products

• Controls & Monitoring Products

If you would like to order a hard copy version of any Orenco catalog, go to the “Request Literature” page of Orenco’s website to
place your order: http://www.orenco.com/corporate/request_lit.cfm

Online Catalogs

Downloadable versions of all Orenco’s catalogs are available on Orenco’s website: http://www.orenco.com/product_catalogs.

About Orenco

Orenco was founded in 1981 to respond to widespread failures in onsite wastewater systems. Orenco designs and manufactures
onsite and decentralized wastewater products for individual properties and small communities.

Our wastewater solutions include tanks, in-tank pumping and fi ltration systems (effl uent fi lters, pump vaults, pumping packages),
secondary treatment systems (textile fi lters, sand fi lters), collection systems (effl uent-only sewers), controls and monitoring prod­ucts, and accessory items. Our products and systems allow treated effl uent to be returned harmlessly to the environment via
drainfi eld, subsurface irrigation, or surface discharge.

We maintain an environmental lab and invest in a continuing research program. Our research and technologies appear in numer­ous publications, including Metcalf and Eddy’s Wastewater Engineering: Treatment, Disposal, Reuse and Crites and Tchobano-
glous’s Small and Decentralized Wastewater Treatment Systems. Our engineers are regularly asked to give workshops, and our
products and systems have been installed in more than 70 countries around the world.

With about 300 employees and 300 points of distribution in North and South America, Australia, New Zealand, Europe, Africa,
and the Middle East, Orenco has become the onsite wastewater industry leader. Research, product development, manufacturing,
and sales support are headquartered at our 26-acre (10.5 ha) facility in Sutherlin, Oregon, USA.

PAGE 2

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Contents

To Our Customers ......................................................................................................2

Fiberglass Tanks .......................................................................................................5

500-Gallon (1890-L) Fiberglass Tanks (T500) ......................................................................6

1000-Gallon (3785-L) Fiberglass Tanks (T1000) ..................................................................7

1500-Gallon (5678-L) Fiberglass Tanks (T1500) ..................................................................8

2000-Gallon (7570-L) Fiberglass Tanks (T2000) ..................................................................9

Chart: 1000-, 1500-, and 2000-Gallon Fiberglass Tank Volume ...........................................10

Chart: 500-Gallon Fiberglass Tank Volume .........................................................................12

Access Risers and Accessories ..................................................................13

Ultra-Rib™ Access Risers (RR, RU, RPU) ...........................................................................14

Kor-Flo™ Access Risers (RR, RP) ......................................................................................15

Small-Diameter Access Risers (RR, RA) .............................................................................16

Riser Tank Adapters (FRTA, PRTA, RRFTA) ..........................................................................17

Roth MultiTank® Adapters (FRTA).......................................................................................18

Adapter Bolt Down Kits (PRTA, RRFTA, RUBD) .....................................................................19

Grade Rings and Grade Ring Inserts (GR, GRI) ....................................................................20

Riser-to-Lid Adapters (RLA)...............................................................................................20

Insulation Plugs (INS) .......................................................................................................21

Riser Safety Grates (RG) ...................................................................................................21

Riser-Cutting Saw Guides (RUSJ) ......................................................................................22

Riser Cutting Stations (RR-CUTTING) .................................................................................22

Drill Fixtures (RK, RUDJ) ...................................................................................................22

Hole Saw/Rib Cutters (RKHS) ............................................................................................23

Grommets (G) ..................................................................................................................23

Adhesives and Adhesive Dispensing Guns (ADH, MA) ..........................................................24

Chart: Adhesive Product Descriptions and Applications........................................................24

Chart: Adhesive Product Recommendations and Quantities .................................................25

®

p. 8

p. 14

p. 17

Access Lids and Accessories .......................................................................26

DuraFiber™ Filberglass Access Lids (FLD) .........................................................................27

Custom Fiberglass Logo Lids (FLD) ....................................................................................27

Fiberglass Landscape Lids (FLD) .......................................................................................27

FLF-Series Fiberglass Access Lids (FLF) ............................................................................28

Fiberglass Access Caps (FL) .............................................................................................28

Lid Bolts, Screws, Wrenches, and Bits (RRL, RUL, RRT) .......................................................29

Basins..............................................................................................................................30

External Filter Basins (FTB) ...............................................................................................31

Stormwater Catch Basins (SCB) ........................................................................................32

Fiberglass Basins (PBF) ....................................................................................................33

PVC Basins (PB) ..............................................................................................................34

Effl uent Filters ..........................................................................................................35

Biotube® Effl uent Filter Inserts (FTi) ...................................................................................36

Biotube® Junior Effl uent Filters (FTJ) .................................................................................36

Biotube® FT Series Residential Effl uent Filters (FT) ..............................................................37

Biotube® FT Series Base Inlet Effl uent Filters (FT) ...............................................................38

Biotube® FT Series Commercial Effl uent Filters (FT) ............................................................39

Ultraviolet (UV) Disinfection Units ............................................................40

UV Disinfection Units ........................................................................................................41

Float Switches, Assemblies, and Accessories ................................42

Chart: Float Switch Selection Matrix ..................................................................................43

Float Switches .................................................................................................................44

Float Switch Assemblies (MF) ............................................................................................48

Float Switch Collars (MFCOLLAR) ......................................................................................48

Float Brackets (PBFB, RRFB) .............................................................................................49

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

p. 21

p. 27

p. 35

PAGE 3

Orenco

®

| General Onsite Wastewater Products Catalog

Splice Boxes and Accessories .....................................................................50

Internal Splice Boxes (SB) .................................................................................................51

External Splice Boxes (SBEX) ............................................................................................52

Conduit Seal Kits (SBCS) ..................................................................................................53

Cord Grips (SBCG) ...........................................................................................................53

Waterproof Wire Nuts (SBAB) ............................................................................................54

Chart: Waterproof Wire Nut Capacities ...............................................................................54

Alarm Panels ..............................................................................................................55

A Series Simplex Control Panels ........................................................................................56

AMAHW Liquid Level Alarm Panels ....................................................................................57

AMLAHW Liquid Level Alarm Panels ..................................................................................57

AMSGBA Single-Gang Alarm .............................................................................................58

9-VDC Liquid Level Alarm Panels ......................................................................................59

Hydrosplitters ...........................................................................................................60

Hydrosplitters (HSA) .........................................................................................................61

Hydrosplitter Enclosures (HSRR) ........................................................................................61

Flow Control Discs and Assemblies (FC) .............................................................................62

Carbon Filters and Accessories .................................................................63

CF Carbon Filters (CF) ......................................................................................................64

CFR Carbon Filter Recharge Packages (CFR) ......................................................................64

CFB Carbon Filter Bushings (CFB) .....................................................................................64

p. 51

p. 59

Miscellaneous Onsite Wastewater Products ....................................65

Unions (U) .......................................................................................................................66

Quick-Disconnect Unions (Q) ............................................................................................66

Low-Pressure Gate Valves (V) ...........................................................................................67

High-Pressure Gate Valves (VG) .........................................................................................67

Ball Valves (VLT) ...............................................................................................................68

True Union Ball Valves (VTU) ..............................................................................................68

Check Valves (KSC) ..........................................................................................................69

Orifi ce Shields (OS) ..........................................................................................................70

Valve Boxes (VB) ..............................................................................................................71

Flushing Assemblies (SEA) ................................................................................................71

Product Ordering Information .....................................................................72

Ultra-Rib™ Access Risers ..........................................................................................................73

Kor-Flo™ Access Risers .............................................................................................................74

Small-Diameter Access Risers ..................................................................................................74

Grade Rings and Grade Ring Inserts ..........................................................................................75

DuraFiber™ Fiberglass Access Lids ...........................................................................................75

FLF-Series Fiberglass Access Lids ............................................................................................76

Fiberglass Access Caps ............................................................................................................76

Fiberglass Basins ....................................................................................................................77

PVC Basins .............................................................................................................................78

Biotube® Effl uent Filter Inserts ..................................................................................................79

Biotube
Biotube
Biotube
Biotube

Float Switch Assemblies ...........................................................................................................83

A Series Simplex Control Panels ...............................................................................................84

Hydrosplitters and Hydrosplitter Enclosures ................................................................................84

®

Junior Effl uent Filters .................................................................................................79

®

FT Series Residential Effl uent Filters ............................................................................80

®

FT Series Base Inlet Effl uent Filters .............................................................................81

®

FT Series Commercial Effl uent Filters ..........................................................................82

p. 61

p. 64

p. 66

Terms and Conditions

Warranties

Notes

PAGE 4

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

®

Fiberglass Tanks

Fiberglass tanks manufactured by Orenco® are watertight, lightweight, durable tanks optimized for use in onsite wastewater
collection and treatment systems for residential, multi-family, or commercial applications as well as for community-wide effl uent
sewer systems. Orenco fi berglass tanks provide primary wastewater treatment, reducing wastewater contaminants by 65-70%.

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 5

Orenco

®

| General Onsite Wastewater Products Catalog

Fiberglass Tanks

500-Gallon (1890-L)
Fiberglass Tanks (T500)

Orenco’s 500-gallon (1890-L) fi berglass tanks are designed for under­ground use as pump tanks in onsite residential and commercial wastewater
collection and treatment systems, as well as for grease tanks and tanks for
non-potable rainwater collection.

• Durable, lightweight FRP construction

• Injection-molded for part consistency and quality

• 100% watertight — factory-tested before shipping

• 623 gallons (2347 L) total volume available

• Direct-fi t for 12-24-inch (300-600-mm) Orenco access risers

• Adapters available for 30-inch (750-mm) access risers

• 2-inch (50-mm) inlet and outlet plumbing, standard

• 4-inch (100-mm) inlet adapters available

• 72-inch (1828-mm) maximum burial depth

• IAPMO approved for grease tanks

• Not approved for use with potable water

500-Gallon (1890-L) Fiberglass Tank

Sample Product Codes*

• T500-24 — 500-gallon (1890-L) fi berglass tank, 24-inch (600-mm)
access riser opening

• T500-24-30 — 500-gallon (1890-L) fi berglass tank, nominal 24-inch
(600-mm) access riser opening, 30-inch (750-mm) riser adapter
installed

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

PAGE 6

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Fiberglass Tanks

1000-Gallon (3785-L)
Fiberglass Tanks (T1000)

Orenco’s 1000-gallon (3785-L) fi berglass tanks are designed for under­ground use in onsite residential and commercial wastewater collection
and treatment systems, community-wide effl uent sewer systems, grease
tanks, and non-potable rainwater collection. When used as a septic tank or
interceptor tank, primary treatment occurs in the tank as organic matter is
collected and digested, reducing wastewater contaminants by 65-70%.

• Durable, lightweight FRP construction

• Injection-molded for part consistency and quality

• 100% watertight — factory-tested before shipping

• 1210 gallons (4580 L) total tank volume

• Ribbed design and baffl e wall for use as a two-compartment tank in
various volumes

• Transportable by light truck

• Installable by small backhoe or excavator

• 48-inch (1219-mm) burial depth, empty

• Direct-fi t for 24-inch (600-mm) Orenco access risers

• Adapter available for 30-inch (750-mm) access risers

• IAPMO approved for septic tanks and grease tanks

• Not approved for use with potable water

®

1000-Gallon (3785-L) Fiberglass Tank

Sample Product Code*

• T1000-01-19/19-11/13 — 1000-gallon (3785-L) fi berglass tank,
single-compartment, 19-inch (483-mm) access riser openings,
11-inch (279-mm) inlet, 13-inch (330-mm) outlet

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 7

Orenco

®

| General Onsite Wastewater Products Catalog

Fiberglass Tanks

1500-Gallon (5678-L)
Fiberglass Tanks (T1500)

Orenco’s 1500-gallon (5678-L) fi berglass tanks are designed for under­ground use in onsite residential and commercial wastewater collection
and treatment systems, community-wide effl uent sewer systems, grease
tanks, and non-potable rainwater collection. When used as a septic tank or
interceptor tank, primary treatment occurs in the tank as organic matter is
collected and digested, reducing wastewater contaminants by 65-70%.

• Durable, lightweight FRP construction

• Injection-molded for part consistency and quality

• 100% watertight — factory-tested before shipping

• 1800 gallons (6813 L) total tank volume

• Ribbed design and baffl e wall for use as a two-compartment tank in
various volumes

• Transportable by light truck

• Installable by small backhoe or excavator

• 48-inch (1219-mm) burial depth, empty

• Direct-fi t for 24-inch (600-mm) Orenco access risers

• Adapter available for 30-inch (750-mm) access risers

• IAPMO approved for septic tanks and grease tanks

• Not approved for use with potable water

1500-Gallon (5678-L) Fiberglass Tank

Sample Product Codes*

• T1500-23-20/22-11 — 1500-gallon (5678-L) fi berglass tank, two­compartment tank with baffl e at third rib, 20-inch and 22-inch (508­mm and 559-mm) access riser openings, 11-inch (279-mm) inlet

• T1500-23-19/19-11/13 — 1500-gallon (5678-L) fi berglass tank,
two-compartment tank with baffl e at third rib, 19-inch (483-mm)
access riser openings, 11-inch (279-mm) inlet, 13-inch (330-mm)
outlet

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

PAGE 8

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Fiberglass Tanks

2000-Gallon (7570-L)
Fiberglass Tanks (T2000)

Orenco’s 2000-gallon (7570-L) fi berglass tanks are designed for under­ground use in onsite residential and commercial wastewater collection
and treatment systems, community-wide effl uent sewer systems, grease
tanks, and non-potable rainwater collection. When used as a septic tank
or interceptor tank, primary treatment occurs in the tank as organic matter
is collected and digested, reducing wastewater contaminants by 65-70%.
2000-gallon fi berglass tanks are available fully assembled.

• Durable, lightweight FRP construction

• Injection-molded for part consistency and quality

• 100% watertight — factory-tested before shipping

• 2300 gallons (8706 L) total tank volume

• Ribbed design and baffl e wall for use as a two-compartment tank in
various volumes

• Transportable by light truck

• Installable by small backhoe or excavator

• 48-inch (1219-mm) burial depth, empty

• Direct-fi t for 24-inch (600-mm) Orenco access risers

• Adapter available for 30-inch (750-mm) access risers

• IAPMO approved for septic tanks

• Not approved for use with potable water

®

2000-Gallon (7570-L) Fiberglass Tank

Sample Product Codes*

• T2000-2-C — 2000-gallon (7570-L) fi berglass tank, two­compartment, custom build

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 9

Orenco

®

| General Onsite Wastewater Products Catalog

Fiberglass Tanks

Fiberglass Tank Volume per Unit of Liquid Depth: 1000-, 1500- and 2000-Gallon Tanks

These tables show the relationship between tank volume, the fl oat setting elevation, and the liquid depth of the tank. The fl oat setting is measured from the
top of the tank to the liquid surface; liquid depth is measured from the liquid surface to the fl oor of the tank.

Liquid Depth: 1000- and 1500-Gallon Tanks

1000-Gallon Tank 1500-gal. Tank

Volume Per In.

of Depth, Gal.

26
—
—
—
—
11
12
13
14
15
16
17
17
19
19
20
20
21
22
22
23
23
23
24
24
24
25
25
26
26
26
26
26
26
26
26
26
26
25
25
24
24
24
23
23
23
22
21
20
20
19
19
17
17
16
15
14
13
12
11
—
—
—
—
—

Gallons in

Tank

1210

—
—

—
1184
1173
1161
1148
1134
1119
1103
1086
1069
1050
1031
1011

991
970
948
926
903
880
857
833
809
785
760
735
709
683
657
631
605
579
553
527
501
475
450
425
401
377
353
330
307
284
262
240
219
199
179
160
141
124
107

91

76

62

49

37

26

—

—

—

0

Volume Per In.

of Depth, Gal.

19
—
—
16
17
18
21
22
23
24
25
26
28
29
30
31
32
32
33
34
35
35
36
36
36
36
37
37
37
38
38
39
39
38
38
37
37
37
36
36
36
36
35
35
34
33
32
32
31
30
29
28
26
25
24
23
22
21
18
17
16
19
—
—
—

Gallons in

Tank

1800

—
—

—
1765
1748
1730
1709
1687
1664
1640
1615
1589
1561
1532
1502
1471
1439
1407
1374
1340
1305
1270
1234
1198
1162
1126
1089
1052
1015

977
939
900
861
823
785
748
711
674
638
602
566
530
495
460
426
393
361
329
298
268
239
211
185
160
136
113

91

70

52

35

—

—

—

0

NOTE: Data used in the tank volume tables are rounded;
totals may not exactly match the actual total volume of
your tank.

Top of Tank

Float
Settings

Liquid
Depth

Example:

If a 1000-gallon tank is filled to a liquid
depth of 49 inches, the liquid volume
in the tank is 1011 gallons. The float
setting is 15 inches and the volume per
inch at that setting is 20 gallons.

Floor of Tank

Liquid

Depth,

Inches

64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10

9
8
7
6
5
4
3
2
1

Floor

Float

Setting,

Inches

To p

—
—
—

4
5
6
7
8
9

10

11*

12

13**

14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
—
—
—
—

* The invert of inlet is typically set 11 inches down from the top of the tank, or in accordance with prevailing state or local regulations.
** For gravity discharge applications, the invert of the outlet is typically located 13 inches down from the top of the tank.

PAGE 10

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Fiberglass Tanks

Liquid Depth: 2000-Gallon Tanks

Liquid Depth,

Inches

78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10

9
8
7
6
5
4
3
2
1

Floor

ACT-PRD-GOP-1, REV. 2.0

Float Setting,

Inches

To p

—
—

3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
—
—
78

Volume Per In.

of Depth, Gal..

—
—
—
—
16
17
18
21
22
23
24
25
26
28
29
30
31
32
32
33
34
35
35
36
36
36
36
37
37
37
38
38
39
37
37
37
37
37
37
37
37
37
37
37
37
37
38
38
38
37
37
37
36
36
36
36
35
35
34
33
32
32
31
30
29
28
26
25
24
23
22
21
18
17
16
—
—
—
—

Gallons in

Tank

2300

—
—

—
2260
2244
2227
2209
2188
2166
2143
2119
2094
2068
2040
2011
1981
1950
1918
1886
1853
1819
1784
1749
1713
1677
1641
1605
1568
1531
1494
1456
1418
1381
1344
1307
1270
1233
1196
1159
1122
1085
1048
1011

974
937
900
861
822
785
748
711
674
638
599
566
530
495
460
426
392
361
329
298
268
239
211
185
160
136
113

91

71

52

35

—

—

—

0

ALL ORENCO SYSTEMS

C

Float
Settings

Liquid
Depth

®

AT 800-348-9843 • FAX: [phone]

®

Top of Tank

Floor of Tank

PAGE 11

Orenco

®

| General Onsite Wastewater Products Catalog

Fiberglass Tanks

Fiberglass Tank Volume per Unit of Liquid Depth: 500-Gallon Tanks

All Orenco® 500-gallon tanks are single-compartment tanks. The table below shows the
relationship between tank volume, the fl oat setting elevation, and the liquid depth. The fl oat
setting is measured from the tank’s top to the liquid surface; liquid depth is measured from
the liquid surface to the tank’s fl oor.

NOTE: Data used in this table are rounded; totals may not exactly match the actual
total volume of your tank.

Liquid Depth: 500-Gallon Tanks

Liquid Depth,

Inches

59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39

38)
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10

9
8
7
6
5
4
3
2
1

Floor

PAGE 12

Float Setting,

Inches

To p

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

Volume/Inch of
Depth, Gallons.

4
4
5
6
6
7
8
8
9

9
10
10
11
11
12
12
12
13
13
13
14
14
14
14
14
15
15
15
15
18
15
15
15
15
14
14
14
14
14
13
13
13
12
12
12
11
11
10
10

9

9

8

8

7

6

6

5

4

4

-

Gallons in Tank

623
621
617
613
608
602
595
588
580
572
563
553
543
533
522
510
499
486
474
461
448

4348

421
407
393
379
364
350
335
321
306
291
276
262
248
233
219
205
192
178
165
152
140
127
115
104

93
82
72
62
53
45
37
30
23
17
12

7
3
0

Top of Tank

Floor of Tank

Float
Settings

Liquid
Depth

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Risers and

Accessories

Orenco® PVC Access Risers provide access to tanks and components in water and wastewater systems. They can be cast
into the tops of concrete tanks, bonded to a concrete or fi berglass tank with epoxy, or bolted down to a concrete tank with an
adapter and bolt-down kit. In addition to providing risers, Orenco also offers riser accessories including grade rings, grade ring
inserts, and riser-to-lid adapters, as well as tools for cutting risers squarely and cutting grommet holes.

Orenco strongly recommends that all tank risers 12-in. (300-mm) and larger in diameter be equipped with riser safety
grates to help prevent accidental or unauthorized entry.

®

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 13

Orenco

®

| General Onsite Wastewater Products Catalog

Access Risers and Accessories

Ultra-Rib™ Access Risers (RR, RU, RPU)

Ultra-Rib™ PVC access risers are used to provide access to tanks and also
used as valve enclosures in water and wastewater systems. Bulk quantities
are available.

• PVC construction

• Concentric rib design

• Available in 12-inch, 18-inch, 21-inch, and 24-inch nominal diam­eters (300-mm, 450-mm, 525-mm, and 600-mm DN)

• Heights available in 3-inch (76-mm) nominal increments to 13 feet
(3.96 m) for 12-inch and 18-inch nominal diameter (300-mm and
450-mm DN) risers and 14 feet (4.27 m) for 21-inch and 24-inch
nominal diameter (525-mm and 600-mm DN) risers

• Bulk pipe available in 13-foot (3.96-m) sections for 12-inch and
18-inch nominal diameter (300-mm and 450-mm DN) pipe and
14-foot (4.27-m) sections for 21-inch and 24-inch nominal diameter
(525-mm and 600-mm DN) pipe

Sample Product Codes*

• RR12XX — 12-inch nominal diameter (300-mm DN), XX = length to
13 feet (3.96 m) in 3-inch (76-mm) nominal increments

• RU18XX — 18-inch nominal diameter (450-mm DN), XX = length to
13 feet (3.96 m) in 3-inch (76-mm) nominal increments

• RR21XX — 21-inch nominal diameter (525-mm DN), XX = length to
14 feet (4.27 m) in 3-inch (76-mm) nominal increments

• RR24XX — 24-inch nominal diameter (600-mm DN), XX = length to
14 feet (4.27 m) in 3-inch (76-mm) nominal increments

• RPU12 — 12-inch nominal diameter (300-mm DN), bulk riser pipe

• RPU18 — 18-inch nominal diameter (450-mm DN), bulk riser pipe

• RPU24 — 24-inch nominal diameter (600-mm DN), bulk riser pipe

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

Orenco strongly recommends that all tank risers 12-in. (300-mm)
and larger in diameter be equipped with riser safety grates to help
prevent accidental or unauthorized entry.

Ultra-Rib Access Risers

PAGE 14

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Risers and Accessories

Kor-Flo™ Access Risers (RR, RP)

Kor-Flo™ PVC access risers are used to provide access to tanks and also
used as valve enclosures in water and wastewater systems. Bulk pipe

quantities are available. Bolt catches are available for securing Orenco
DuraFiber™ or FL-Series fiberglass lids to them.

• PVC construction

• Double-walled rib design

• Available in 30-inch nominal diameter (750-mm DN)

• Riser heights to 12 feet (3.66 m) available in 2-inch (50-mm) nominal
increments

• Bulk pipe available in 13-foot (3.96-m) sections

Sample Product Codes*

• RR30XX — 30-inch nominal diameter (750-mm DN) access riser,
XX = length to 12 feet (3.66 m) in 2-inch (50-mm) nominal
increments

• RP30 — 30-inch nominal diameter (750-mm DN) bulk riser pipe

Kor-Flo

™

30-inch (750-mm) Access Riser

®

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

Orenco strongly recommends that all tank risers 12-in. (300-mm)
and larger in diameter be equipped with riser safety grates to help
prevent accidental or unauthorized entry.

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 15

Orenco

®

| General Onsite Wastewater Products Catalog

Access Risers and Accessories

Small-Diameter Access Risers (RR, RA)

Orenco® small-diameter access risers are used as valve enclosures,
inspection ports, and service connection risers. For 12-inch (300-mm)
Ultra-Rib™ access risers, see “Ultra-Rib Access Risers” in this catalog.

• Class 63 IPS construction on 8-inch nominal diameter (200-mm DN)
small-diameter access risers

• Plastic Irrigation Pipe (PIP) construction on 15-inch nominal diameter
(375-mm DN) small-diameter access risers

• Riser heights available in 3-inch (76-mm) increments

Sample Product Codes*

• RR08XX — small-diameter IPS access riser, lid bolt catches installed,
XX = length to 13 feet (3.96 m) in 3-inch (76-mm) increments

• RA08XX — small-diameter IPS access riser, no bolt catches installed,
XX = length to 13 feet (3.96 m) in 3-inch (76-mm) increments

* For the full range of available product options, see the “Product Ordering
Information” section in this catalog.

8-inch Smooth Access Riser

PAGE 16

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Risers and Accessories

Riser Tank Adapters
(FRTA, PRTA, RRFTA)

Orenco® Riser Tank Adapters provide a structural, watertight method of
installing an access riser over a tank opening. Depending on the Riser Tank
Adapter model, they can be cast into the top of a concrete tank, bonded to
a tank with adhesive, or mechanically fastened to a tank with an adapter
bolt-down kit.

• Watertight installation

• Durable, corrosion-resistant materials

• Bolt-down kits available for applicable models

Product Codes

• FRTA30-FRP — adhesive-mount riser tank adapter for installing
30-inch nominal diameter (750-mm DN) access risers onto Orenco
fi berglass tanks

• FRTA36 — cast-in or bolt-down riser tank adapter for 36-inch
nominal diameter (900-mm DN) access risers

• PRTA-08 — cast-in riser tank adapter for 8-inch nominal diameter
(200-mm DN) inspection ports

• PRTA24 — bolt-down riser tank adapter for 24-inch nominal diameter
(600-mm DN) access risers

• PRTA24-2 — cast-in riser tank adapter for 24-inch nominal diameter
(600-mm DN) access risers

• PRTA30 — cast-in or bolt-down riser tank adapter for 30-inch
nominal diameter (750-mm DN) access risers

• RRFTA — bolt-down riser tank adapter for 21-inch and 24-inch
nominal diameter (575-mm and 600-mm DN) access risers

• RRFTA30 — bolt-down riser tank adapter for 30-inch nominal
diameter (750-mm DN) access risers

®

PRTA24-2 Cast-In Tank Adapter

FRTA30-FRP Tank Adapters

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

PRTA30 Tank Adapters

®

AT 800-348-9843 • FAX: [phone]

PAGE 17

Orenco

®

| General Onsite Wastewater Products Catalog

Access Risers and Accessories

Roth Tank Adapters (FRTA)

Orenco® Roth Tank Adapters provide a structural, watertight method of
installing an access riser over a tank opening in a Roth MultiTank
down kit is ordered separately (see “Product Codes” below).

• Specifi cally designed for Roth MultiTank septic tanks

• Durable fi berglass design

• Watertight connection between adapter and riser with a single adhe­sive bead

®

. A bolt-

Product Codes

• FRTA24-RVF — bolt-down Roth tank adapter for 24-inch nominal
diameter access risers (600-mm DN)

• FRTA24-R-MNH — bolt-down Roth tank access cover

• FRTA24-RBDKIT — bolt down kit; includes butyl tape and stainless
steel fasteners

FRTA24-RVF Roth Tank Adapter

PAGE 18

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Risers and Accessories

Adapter Bolt-Down Kits
(PRTA, RRFTA, RUBD)

Orenco® Adapter Bolt-Down Kits provide everything necessary for a secure,
watertight connection between a concrete tank and a bolt-down tank
adapter for an access riser.

• Corrosion-resistant stainless steel anchors

• Butyl tape for watertight joints

• Stainless steel hold-down straps for Ultra-Rib™ access risers

Product Codes

• PRTA24BDKIT — for attaching a PRTA24 Riser Tank Adapter

• PRTA30BDKIT — for attaching a PRTA30 Riser Tank Adapter

• RRFTABDKIT — for attaching an RRFTA Riser Tank Adapter

• RRFTA30BDKIT — for attaching an RRFTA30 Riser Tank Adapter

• RUBDKIT — for attaching an Ultra-Rib access riser; two kits are re­quired for each 24-inch nominal diameter (600-mm DN) access riser

®

Orenco Bolt-Down Kits

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 19

Orenco

®

| General Onsite Wastewater Products Catalog

Access Risers and Accessories

Grade Rings and Grade Ring Inserts
(GR, GRI)

Orenco® Grade Rings are used to provide a watertight extension to the
height of an existing access riser or pump basin; they are constructed of an
Orenco Grade Ring Insert and a section of ribbed PVC riser pipe. Grade Ring
Inserts can also be purchased separately.

• PVC ribbed riser material

• PVC construction on inserts for 12-inch and 18-inch nominal diameter
(300-mm and 450-mm DN) riser pipe

• ABS construction on inserts for 21-inch, 24-inch, and 30-inch nominal
diameter (525-mm, 600-mm, and 750-mm DN) riser pipe

Sample Product Codes*

• PRTA24-2 — grade ring insert for 24-inch nominal diameter (600­mm DN) riser pipe

• GRI24 — grade ring insert for 24-inch nominal diameter (600-mm
DN) riser pipe

• GRI30 — grade ring insert for 30-inch nominal diameter (750-mm
DN) riser pipe

• GR18XX — grade ring, 18-inch nominal diameter (450-mm DN),
XX = height in 3-inch (76-mm) increments

• GR24XX — grade ring, 24-inch nominal diameter (600-mm DN),
XX = height in 3-inch (76-mm) increments

• GR30XX — grade ring, 30-inch nominal diameter (750-mm DN),
XX = height in 3-inch (76-mm) increments

* For the full range of available product options, see the “Product Ordering
Information” section in this catalog.

Orenco® Grade Ring Inserts

Riser-to-Lid Adapters (RLA)

Orenco® Riser-to-Lid Adapters (RLAs) are used to provide a simple, secure,
watertight method of attaching an Orenco Fiberglass Access Lid to a ribbed
PVC access riser. RLAs are especially useful when the top of the riser is
uneven or has a damaged edge.

• ABS construction

• Fits 24-inch or 30-inch nominal diameter (600-mm or 750-mm DN)
Ultra-Rib™ or Perma-Loc™ riser pipe

• Fits all 24-inch (600-mm) Orenco Fiberglass Access Lids

• RLA30 is compatible with Orenco FLF-Series 30-inch (750-mm) lids;
it is not compatible with Orenco DuraFiber

• Ideal for uneven risers or damaged riser edges

• Bolt holes pre-drilled in RLA24

Product Codes

• RLA24 — riser-to-lid adapter, 24-inch nominal diameter (600-mm DN),
pre-drilled bolt holes

• RLA30 — riser-to-lid adapter, 30-inch nominal diameter (750-mm DN)

PAGE 20

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

TM

30-inch (750-mm) lids

RLA24 Riser-to-Lid Adapter

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Risers and Accessories

Insulation Plugs (INS)

Orenco® Insulation Plugs are used to protect septic system components —
contained in the riser — from freezing during cold weather.

• R30 insulation value

• Stackable for greater insulation

• Sized to fi t inside of a 24-inch or 30-inch nominal diameter (600-mm
or 750-mm DN) access riser

• Watertight shell

• Polyethylene strap for easy removal

Product Codes

• INS246 — insulation plug for 24-inch nominal diameter (600-mm DN)
access risers, 6-inch (152-mm) thickness

• INS306 — insulation plug for 30-inch nominal diameter (750-mm DN)
access risers, 6-inch (152-mm) thickness

Riser Safety Grates (RG)

®

INS246 Insulation Plug

Orenco® Riser Safety Grates rest on the fl ange at the bottom of an access
riser to help prevent people or tools from falling into a tank. They are also
used to prevent soil buildup in the bottoms of valve boxes. Orenco Riser
Safety Grates are sized to fi t Ultra-Rib™, Perma-Loc™, Kor-Flo™, and
equivalent risers.

• Polypropylene construction

• Non-corroding

• Easy to install

• Sizes available for 12-inch, 18-inch, 21-inch, and 24-inch nominal
diameter risers (300-mm, 450-mm, 525-mm, and 600-mm DN)

• Fits most brands of ribbed riser pipe

Product Codes

• RG12 — riser safety grate for 12-inch nominal diameter risers
(300-mm DN)

• RG18 — riser safety grate for 18-inch nominal diameter risers
(450-mm DN)

• RG21 — riser safety grate for 21-inch nominal diameter risers
(525-mm DN)

• RG24 — riser safety grate for 24-inch nominal diameter risers
(600-mm DN)

Orenco strongly recommends that all tank risers 12-in. and larger in
diameter be equipped with riser safety grates to help prevent
accidental or unauthorized entry.

RG24 installed in 24-inch (600-mm) Riser, Cutaway View

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 21

Orenco

®

| General Onsite Wastewater Products Catalog

Access Risers and Accessories

Riser-Cutting Saw Guides (RUSJ)

Orenco® Riser-Cutting Saw Guides allow a Skilsaw® Model 77 circular saw
to make square cuts between ribs on riser pipe with concentric rings.

• Portable

• Easy to use

Product Codes

• RUSJ12 — saw guide for 12-inch nominal diameter (300-mm DN)
Ultra-Rib™ riser pipe

• RUSJ — saw guide for 18-inch, 21-inch, and 24-inch nominal diam­eter (450-mm, 525-mm, and 600-mm DN) Ultra-Rib™ riser pipe

Riser-Cutting Stations (RR-CUTTING)

Orenco® Riser-Cutting Stations make it easy to cut 18-inch nominal
diameter (450-mm DN) or larger riser pipe. For storage, the cutting station
breaks down into three pieces.

• Easy to disassemble

• For 18-inch nominal diameter (450-mm DN) and larger riser pipe

• Fits Ultra-Rib™, Perma-Loc™, and Kor-Flo™ riser pipe

• Saws and saw guides ordered separately

RUSJ Saw Guide

Product Code

• RR-CUTTING STATION

Drill Fixtures (RK, RUDJ)

Orenco® Drill Fixtures allow the top edge of a PVC access riser to be drilled
for the installation of lid bolts.

• Models for Kor-Flo™ or Ultra-Rib pipe

• Reliable, repeatable, accurate hole placement

Sample Product Codes*

• RK-DRILL FIXTURE — for 36-inch nominal diameter (900-mm DN)
Kor-Flo™ risers; allows insertion of bolt catches

• RUDJ24 — for 24-inch nominal diameter (600-mm DN) Ultra-Rib™
pipe

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

Orenco Riser-Cutting Station

RK-DRILL FIXTURE

PAGE 22

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Risers and Accessories

Rib-Cutting Hole Saws (RKHS)

Orenco® Rib-Cutting Hole Saws cut holes in PVC riser pipe and pockets in
the pipe ribs at the same time. They eliminate the time it would otherwise
require to prep around the hole before installing a grommet.

• Saves time cutting and prepping

• Requires an arbor and a ¼-inch drill bit (RK-ARBOR, RK-DRILL BIT),
ordered separately

Product Codes

• RKHSS075 — ¾-inch (approximately 19-mm) hole saw with cutter
for ribbed pipe

• RKHS100 — 1-inch (approximately 25-mm) hole saw with cutter for
ribbed pipe

• RKHS125 — 1¼-inch (approximately 32-mm) hole saw with cutter
for ribbed pipe

• RKHS150 — 1½-inch (approximately 40-mm) hole saw with cutter
for ribbed pipe

• RKHS200 — 2-inch (approximately 50-mm) hole saw with cutter for
ribbed pipe

®

Orenco Rib-Cutting Hole Saws

Pipe Grommets (G)

Orenco® Pipe Grommets provide a watertight seal at piping penetrations.
Orenco ADH100 Adhesive/Sealant is recommended to assure a watertight
seal between the pipe grommet and access riser.

• Grommets conform to standard IPS pipe sizes

• ½-inch to 6-inch IPS (25-mm to 150-mm DN) grommet sizes
available

Product Codes

• G05L — grommet for ½-inch nominal diameter pipe (15-mm DN)

• G07L — grommet for ¾-inch nominal diameter pipe (20-mm DN)

• G1L — grommet for 1-inch nominal diameter pipe (25-mm DN)

• G125L — grommet for 1¼-inch nominal diameter pipe (32-mm DN)

• G150L — grommet for 1½-inch nominal diameter pipe (40-mm DN)

• G2L — grommet for 2-inch nominal diameter pipe (50-mm DN)

• G3L — grommet for 3-inch nominal diameter pipe (80-mm DN)

• G4L — grommet for 4-inch nominal diameter pipe (100-mm DN)

• G6L — grommet for 6-inch nominal diameter pipe (150-mm DN)

Orenco Pipe Grommets

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 23

Orenco

®

| General Onsite Wastewater Products Catalog

Access Risers and Accessories

Adhesives and Adhesive Dispensing
Guns (ADH, MA)*

Orenco® Methacrylate Adhesives are available for a variety of products that
need bonding or sealing: PVC, ABS, fi berglass, concrete, and rubber. In
addition, adhesives are also available in packages of various sizes for jobs
small and large. To fi nd the correct adhesive for your application, see the
chart below.

Adhesive Applications Working

Time

ADH100

Bonding, sealing;
bonds PVC, ABS, fi berglass,
seals pipe grommets

4 minutes Handling strength in 12

Cure time @
70° F (21° C)

hours, full cure in 2-3

days

Product Codes**

• ADH100 — single part adhesive, 10.2-ounce (300-mL) cartridge

• ADHP10 — single part adhesive, 475-mL container

• ADHQ10 — single part adhesive, 950-mL container

• MA320 — two-part adhesive, 200-g packet

• SA510 — two-part adhesive, 600-mL cartridge

• SA530 — two-part adhesive, 600-mL cartridge

• SA590 — two-part adhesive, 600-mL cartridge

• IPS810 — two-part adhesive, 1-pint (473-mL) jar

• MA-MANUAL GUN-600ML — manual dispensing gun for 600-mL
SA500-series adhesives

• MA-BATT GUN-600ML — battery-powered dispensing gun for
600-mL SA500-series adhesives

* For the full range of available adhesive options, contact your local Orenco
Distributor or Orenco.

Physical

Description

Opaque,

toothpaste

• Clean, dry bonding surface required; will sag slightly in warm temperatures.
Not formulated for exposure to sunlight. Not intended for structural joints
that are primarily in tension, in peel, or in bending

• Single-part adhesive; 10.2-oz (300-mL) tube uses standard caulking gun

Product Notes

MA320

SA510

SA530

SA590

IPS 810

Structural joint bonding;
bonds PVC, fi berglass

Structural joint bonding;
bonds PVC, ABS, fi berglass
at low ambient tempera­tures

Structural joint bonding;
bonds PVC, ABS, fi berglass

Structural joint bonding;
bonds PVC, ABS, fi berglass

Structural joint bonding,
self-leveling; bonds PVC,
ABS, fi berglass; concrete

10-20

minutes

10-15

minutes

20-30

minutes

80-100
Minutes

~ 30

minutes

< 1 hour; depends on
temperature, adhesive

thickness

< 45 minutes;

depends on tempera-

ture, adhesive thickness

< 2 hours;

depends on tempera-

ture, adhesive thickness

< 3 hours;

depends on tempera-

ture, adhesive thickness

~ 2 hours;

depends on tempera-

ture, adhesive thickness

White,

peanut

butter

Gray,

toothpaste

Gray,

toothpaste

Gray,

toothpaste

White,

molasses

• Clean, dry bonding surface required; roughened surfaces recommended for
best bonding

• Two-part adhesive; supplied in 7-ounce (200-g packets), no dispensing gun
required

• Clean, dry bonding surface required; roughened surfaces recommended for
best bonding. For shorter working times or thinner adhesive beads

• Two-part adhesive, 1:1 mix ratio

• Clean, dry bonding surface required; roughened surfaces recommended for
best bonding. For longer working times or thicker adhesive beads; will sag
slightly in warm temperatures

• Two-part adhesive, 1:1 mix ratio

• Clean, dry bonding surface required; roughened surfaces recommended for
best bonding. For longer working times or thicker adhesive beads in very
warm or hot temperatures; will sag slightly

• Two-part adhesive; 1:1 mixing ratio

• Self-leveling

• Two-part adhesive; 10:1 mixing ratio; requires hand mixing

* Contact your local Distributor or Orenco for shipping information or an MSDS sheet on any of Orenco’s adhesives.

PAGE 24

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Risers and Accessories

Product Recommendations and Quantities

®

ADH100

GR24XX Grade Ring
24-in. (600-mm)

GR30XX Grade Ring
30-in. (750-mm)

PRTA24 Adapter
24-in. (600-mm)

PRTA24-2 Adapter
24-in. (600-mm)

PRTA30 Adapter
30-in. (750-mm)

RRFTA Adapter
24-in. (600-mm)

10.2-oz (300-mL) Tube

Requires one tube

Requires two tubes Requires two packets Requires 2⁄3 cartridge* Requires 2⁄3 cartridge* Requires 2⁄3 cartridge** N/A

Requires one tube Requires one packet Requires 1⁄3 cartridge* Requires 1⁄3 cartridge* Requires 1⁄3 cartridge** N/A

Requires one tube Requires one packet Requires 1⁄3 cartridge Requires 1⁄3 cartridge Requires 1⁄3 cartridge** <1 pint*

Requires two tubes Requires two packets Requires 2⁄3 cartridge* Requires 2⁄3 cartridge* Requires 2⁄3 cartridge** N/A

N/A N/A N/A N/A N/A 1 pint*

7-oz (200-g) Packet

Requires one packet Requires 1⁄3 cartridge* Requires 1⁄3 cartridge* Requires 1⁄3 cartridge** N/A

* Indicates the preferred adhesive(s) for the product listed
** Preferred adhesive for very warm or hot climates

MA320

SA510

600-mL Cartridge

SA530

600-mL Cartridge

SA590

600-mL Cartridge

IPS 810

1-pint (473-mL) jar

MA-MANUAL GUN-600ML

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

MA-BATT GUN-600ML

®

AT 800-348-9843 • FAX: [phone]

PAGE 25

Orenco

®

| General Onsite Wastewater Products Catalog

Access Lids and

Accessories

Orenco® DuraFiber™ Access Lids and FL-Series Fiberglass Lids and Caps provide a secure, strong, and uniform covering for
risers, pump basins, valve boxes, and tank hatches. All are available with gaskets to help provide watertight seals. In addition to
providing access lids, Orenco also offers lid accessories such as tools for drilling bolt holes, as well as lid-mounting hardware.

PAGE 26

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Lids and Accessories

DuraFiber™ Fiberglass Access Lids (FLD)

Orenco® DuraFiber™ Access Lids provide a secure, damage-resistant
covering for ribbed PVC and HDPE risers, pump basins, and access ports.
They are not recommended for vehicular traffi c. Made in the USA.

• Solid, resin-infused fi berglass construction

• Available for 24-inch or 30-inch nominal diameter access risers
(600-mm and 750-mm DN)

• 20,000-lb breaking strength (9,000 kg)

• Standard green or brown colors

• Available with or without urethane lid gasket

• Available with carbon fi ltration

• 4 stainless steel fl athead socket cap screws and hex key wrench
included

Sample Product Codes*

• FLD24G — fi berglass lid for 24-inch nominal diameter access risers
(600-mm DN), with gasket

• FLD30G — fi berglass lid for 30-inch nominal diameter access risers
(750-mm DN), with gasket

®

Orenco DuraFiber™ Fiberglass Access Lids

Custom Fiberglass Logo Lids (FLD)

Orenco offers imprinting of custom logos, with customer-supplied images, on
quantity orders of 24-inch and 30-inch diameter (600-mm and 750-mm)
DuraFiber™ lids.

• Solid, resin-infused fi berglass construction

• 20,000-lb breaking strength (9,000 kg)

• Available with or without lid gasket

Fiberglass Landscape Lids (FLD)

In addition to standard green and brown access lids, Orenco offers Land­scape Lids in grass, bark, and river rock patterns for selected DuraFiber™
fi berglass lids.

• DuraFiber lids available in 24-inch size (600-mm)

• Solid, resin-infused fi berglass construction

• Available with or without lid gasket

• Stainless steel fl athead socket cap screws and hex key wrench included

™

* For the full range of standard options for DuraFiber

“Product Ordering Information” section in this catalog.

Lids, see the

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

Orenco DuraFiber™ Landscape Lids

®

AT 800-348-9843 • FAX: [phone]

PAGE 27

Orenco

®

| General Onsite Wastewater Products Catalog

Access Lids and Accessories

FLF-Series Fiberglass Access Lids (FLF)

Orenco® FLF-Series Fiberglass Access Lids provide a secure, strong, and
uniform covering for risers, pump basins, and access ports. Gasketed models
help provide a watertight seal between the lid and the access riser. Orenco
FLF-Series Access Lids are not rated for vehicular traffi c. Made in the USA.

• Fiberglass construction over structural foam core material

• 18-inch (450-mm DN) FLF lids fi ts UltraRib™, Perma-Loc™

• 21-inch (525-mm DN) FLF lids fi ts UltraRib

• 30-inch (750-mm DN) FLF lids fi ts Perma-Loc, Kor-Flo™

• Rated for 2500-lb (1134-kg) wheel load

• Standard green or brown colors

• Available with or without lid gasket

• Available with carbon fi ltration

• 2 or 4 stainless steel fl athead socket cap screws and hex key wrench
included

Sample Product Code*

• FL30G — fi berglass lid for 30-inch nominal diameter access risers
(750-mm DN), with gasket

Orenco FLF-Series Fiberglass Access Lids

Fiberglass Access Caps (FL)

Orenco® Fiberglass Access Caps are used as strong, uniform access covers
for valve boxes and tank hatches. Gasketed models provide a watertight
seal between the lid and the access riser. Orenco Fiberglass Access Caps
are rated for pedestrian traffi c only. Made in the USA.

• Fiberglass construction

• Available for 8-inch, 12-inch, and 15-inch nominal diameter risers
(200-mm, 300-mm, and 375-mm DN)

• Available with or without lid gasket

• Available with smooth or non-skid surface

• Available in green or white colors

Sample Product Codes*

• FL8G — fi berglass cap for 8-inch nominal diameter (200-mm DN)
risers, with gasket, slip fi t

• FL12G — fi berglass cap for 12-inch nominal diameter (300-mm DN)
risers, with gasket, slip fi t

• FL12GT — fi berglass cap for 12-inch nominal diameter (300-mm DN)
risers, with gasket, 2 bolts included

• FL12GTU — fi berglass cap for 12-inch nominal diameter (300-mm
DN) Ultra-Rib™ access riser pipe, with gasket, 2 bolts included

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

Orenco Fiberglass Access Caps

PAGE 28

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Access Lids and Accessories

Lid Bolts, Screws, Wrenches, and Bits
(RRL, RUL, RRT)

Orenco® Lid Bolts, Screws, and Lid Screw Kits do a great job of attaching
fi berglass lids to PVC risers.

• Hex-drive screw and bolt heads fi t fl ush to lid surface

• Pinned, hex-drive bolts require a special wrench for increased tamper
resistance

• Hex-drive screws require a hex key or bit for removal

Product Codes

• RRLAB — lid bolt, 5⁄16 × 1¼-inch, thread-cutting; used with RLA24
adapters

• RULB — lid screw, 5⁄16 × 2-inch, hex-drive fl at head; used with all
adapters except RLA24

• RRLW — 3⁄16-inch hex-drive wrench for 5⁄16-inch diameter bolts
and screws

• RRLW-BIT — 3⁄16-inch hex-drive bit for 5⁄16-inch diameter bolts and
screws

• RRTLB — pinned lid bolt, 5⁄16 × 1¼-inch, non-thread cutting,
tamper-proof; used with RLA24 adapters

• RRTLW — 5⁄16-inch hex-drive wrench; used with tamper-proof
pinned bolts

• RRLAB+W-KIT — kit, 3⁄16-inch hex-drive wrench and four
5⁄16 × 1¼-inch, thread-cutting lid bolts; used with RLA24 adapters

• RRLB+W-KIT — kit, 3⁄16-inch hex-drive wrench and two
5⁄16 × 2-inch, hex-drive fl at head screws; used with 12-inch and
30-inch (300-mm and 750-mm) lids

• RULB-KIT — kit, 3⁄16-inch hex-drive wrench and four 5⁄16 × 2-inch,
hex-drive fl at head screws; used with 18-inch and 24-inch (450-mm
and 600-mm) lids

®

RRLB+W-KIT Lid Bolt Kit

RRTLB Pinned Lid Bolts and RRTLW Hex Drive Wrench

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 29

Orenco

®

| General Onsite Wastewater Products Catalog

Basins

Orenco® offers several types of basins for residential and commercial use. Filter Basins are used to house fi lters in residential
and commercial wastewater systems. Fiberglass and PVC Basins house pumps and related equipment. Stormwater Catch
Basins are specifi cally designed to catch and fi lter stormwater runoff.

PAGE 30

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Basins

External Filter Basins (FTB)

Orenco® External Filter Basins are used to retrofi t an existing residential
septic system with an effl uent fi lter. They eliminate the need for costly and
sometimes hazardous modifi cations to an existing septic tank with restric­tive access openings or to unusable outlet baffl es or tees. External Filter
Basins include a basin, an 8-inch (203-mm) Orenco Effl uent Filter, and a
grade ring for attaching a section of riser pipe to the basin.

• 18-inch nominal diameter (450-mm DN) basin

• Ribbed PVC body

• Fiberglass reinforced polyester base

• 12-inch (305-mm) tall, 8-inch (203-mm) diameter, Orenco Effl uent
Filter included

• Extendable fi lter handle for easy removal

• 4-inch nominal diameter (100-mm DN) inlet and outlet openings

• Grade ring for 18-inch nominal diameter (450-mm DN) riser pipe
included

• Adapter kit with grommet and 4-inch Type 3034 pipe adapter ordered
separately (Product Code FTB3034KIT)

• 18-inch (450-mm) grade ring ordered separately (See “Grade Rings
and Grade Ring Inserts” in this catalog)

• 18-inch (450-mm) fi berglass access lid ordered separately (see
“Fiberglass Access Lids” in this catalog)

®

Product Codes

• FTB1824-0812 — Filter basin, 18-inch nominal diameter (450-mm
DN), 24-inch (610-mm) height, includes 12-inch (305-mm) tall,
8-inch (203-mm) diameter, Orenco effl uent fi lter

• FTB3034KIT — Adapter kit with gasket for 4-inch (100-mm) Type
3034 pipe

FTB1824-0812 External Filter Basin

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 31

Orenco

®

| General Onsite Wastewater Products Catalog

Basins

Stormwater Catch Basins (SCB)

Orenco® Stormwater Catch Basins provide a durable, cost-effective
alternative to a concrete or steel catch basin. Their lightweight, durable PVC
and fi berglass construction makes them quick to install, and their easy-to­remove fi lter screens make them simple to service and maintain.

• Easy-to-remove fi lter

• Screens materials to 1⁄8-inch (3 mm) diameter

• Nominal open area of fi lter is 50%

• 6-inch NPS (150-mm DN) inlet and outlet pipe couplings for
SCB1236-6L model

• 4-inch NPS (100-mm DN) inlet and outlet couplings for all other
models

• Includes durable fi berglass lid and mounting hardware on SCB1236-L
and 1236-6L models

Product Codes

• SCB0824 — catch basin, 8-inch nominal diameter (200-mm DN),
24-inch (610-mm) height

• SCB0836 — catch basin, 8-inch nominal diameter (200-mm DN),
36-inch (914-mm) height

• SCB1236 — catch basin, 12-inch nominal diameter (300-mm DN),
36-inch (914-mm) height

• SCB1236-L — catch basin, 12-inch nominal diameter (300-mm DN),
36-inch (914-mm) height, 4-inch NPS (100-mm DN) level inlet and
outlet

• SCB1236-6L — catch basin, 12-inch nominal diameter (300-mm
DN), 36-inch (914-mm) height, 6-inch NPS (150-mm DN) level inlet
and outlet

SCB1236-6L Stormwater Catch Basin

PAGE 32

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Basins

Fiberglass Basins (PBF)

Orenco® Fiberglass Basins have an extremely high strength-to-weight
ratio. Fiberglass basins are constructed of fi lament-wound fi berglass with
a structurally bonded fi berglass base for durability and watertightness. Op­tions include splice boxes, fl oat stem holders, guide rails, base elbows, and
cleanout/vent assemblies.

• High strength-to-weight ratio

• Filament-wound

• Watertight

• Lightweight

• Durable

• Integral antifl otation base

• 24-inch, 30-inch and 36-inch nominal diameters available, standard
(600-mm, 750-mm, and 900-mm DN)

• 48-inch, 60-inch, 72-inch and 84-inch basin heights, standard
(1219-mm, 1524-mm, 1829-mm and 2134-mm)

• Custom heights to 15 feet (4.6 m) available

• Fiberglass lid ordered separately

®

Sample Product Codes*

• PBF2472 — fi berglass basin, 24-inch nominal diameter
(600-mm DN), 72-inch basin height (1524-mm)

• PBF3072 — fi berglass basin, 30-inch nominal diameter
(750-mm DN), 72-inch basin height (1524-mm)

• PBF3672 — fi berglass basin, 36-inch nominal diameter
(900-mm DN), 72-inch basin height (1524-mm)

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

Orenco Fiberglass Pump Basin

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 33

Orenco

®

| General Onsite Wastewater Products Catalog

Basins

PVC Basins (PB)

Orenco® PVC Basins are constructed of durable PVC pipe with a fi berglass
base that is attached with epoxy for strength and watertightness. Options
include splice boxes, fl oat stem holders, and cleanout/vent assemblies.

• PVC construction

• Watertight

• Durable

• 24-inch and 30-inch nominal diameters available, standard
(600-mm and 750-mm DN); other diameters available

• 54-inch, 60-inch, 66-inch, and 72-inch basin heights, standard
(1373-mm, 1524-mm, 1676-mm, and 1829-mm); other heights
available in 3-inch (76-mm) increments

• Custom heights to 13 feet for 30-inch basins (3.9 m for 750-mm) and
14 feet for 24-inch basins (4.2 m for 600-mm)

• Fiberglass lid ordered separately

Sample Product Code*

• PB3072-BLANK — PVC basin, 30-inch nominal diameter (750-mm
DN), 72-inch basin height (1829-mm), no holes, no fl oat bracket

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

Orenco PVC Pump Basin

PAGE 34

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Effl uent Filters

®

Orenco® Effl uent Filters prevent the discharge of large solids from a tank, improving effl uent quality and extending drainfi eld
life. Effl uent fl ows from the “clear zone” inside of the septic tank into the Biotube
suspended solids in the effl uent are retained in the fi lter’s interior space, where organic material can be further broken down.
Orenco
cleaned as often, reducing maintenance time and cost. Orenco offers a number of effl uent fi lters for a wide range of residential
and commercial wastewater applications.

®

Biotube® Effl uent Filters have 5-10 times more fl ow area than competing effl uent fi lters, so they don’t need to be

®

fi lter through the fi lter’s vertical holes. Large

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 35

Orenco

®

| General Onsite Wastewater Products Catalog

Effl uent Filters

Biotube® Effl uent Filter Inserts (FTI)

Orenco’s Biotube® Filter Inserts remove about two-thirds of suspended
solids from effl uent, helping extend drainfi eld life. They are ideal for fast,
economical retrofi t applications in residential septic tanks. They install in
minutes inside of an existing septic tank’s Schedule 40 or Type 3034 outlet
tee.

• 4-inch (100-mm) nominal fi lter diameter

• 18-inch (457-mm) fi lter height

• 1⁄8-inch (3-mm) fi lter mesh

• Installs in minutes inside existing tanks

• Corrosion-proof construction

• Easy to clean

Sample Product Codes*

• FTi0418-W — Biotube Effl uent Filter insert, 4-inch (100-mm)
diameter, 18-inch (457-mm) fi lter height, for Type 3034 outlet tee

• FTi0418-S — Biotube Effl uent Filter insert, 4-inch (100-mm)
diameter, 18-inch (457-mm) fi lter height, for Schedule 40 outlet tee

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

Biotube® Junior Effl uent Filters (FTJ)

Orenco® Biotube® Junior Effl uent Filters remove about two-thirds of
suspended solids from effl uent, helping extend drainfi eld life. They are
designed for small fl ows or for septic tanks that are not tall enough to fi t a
full size Biotube
Schedule 40 or Type 3034 outlet pipe in a septic tank. They come with a
fi lter cartridge, PVC housing, and an extendable PVC handle.

• 4-inch (100-mm) nominal fi lter diameter

• 18-inch (457-mm) fi lter height

• 1⁄8-inch (3-mm) or 1⁄16-inch (1.5-mm) fi lter mesh available

• Corrosion-proof construction

• Extendable handle

• Easy to clean

Sample Product Codes*

• FTJS0418A — Biotube® Junior effl uent fi lter, 4-inch (100-mm) diam­eter, 18-inch (457-mm) fi lter height, with fl oat bracket, for Schedule
40 outlet tee

• FTJW0418 — Biotube
diameter, 18-inch (457-mm) fi lter height, with fl oat bracket, for Type
3034 outlet tee

• FTJ-CA0418 — Biotube
(100-mm) diameter, 18-inch (457-mm) fi lter height 1⁄8-inch (3-mm)
mesh

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

®

effl uent fi lter. Biotube® Junior Effl uent Filters install on the

®

Junior effl uent fi lter, 4-inch (100-mm)

®

Junior replacement fi lter cartridge, 4-inch

Biotube® Effluent Filter Insert

Biotube® Junior Effluent Filter

PAGE 36

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Effl uent Filters

Biotube® FT Series Residential
Effl uent Filters (FT)

Orenco® Biotube® FT Series Residential Effl uent Filters remove about two­thirds of suspended solids from effl uent, helping extend drainfi eld life. They
are used in new or existing tanks, for residential and light commercial use.

®

FT Series Residential Effl uent Filters install on the Schedule 40 or

Biotube
Type 3034 outlet pipe in the septic tank. They come with a fi lter cartridge,
PVC housing, and an extendable PVC handle.

• 4-inch (100-mm) nominal fi lter diameter

• 1⁄8-inch (3-mm) or 1⁄16-inch (1.5-mm) fi lter mesh available

• Corrosion-proof construction

• Extendable handle

• Easy to clean

• Optional fl ow modulation plate available

• Optional fl oat bracket available for high-level alarm assembly

• High-level alarm assembly ordered separately (see “Float Switch As­semblies” in the “Product Ordering Information” section of this catalog)

®

Sample Product Codes*

• FTS0444-36M — Biotube® FT fi lter, 4-inch (100-mm) diameter,
44-inch (1118-mm) housing height, 36-inch (914-mm) cartridge
height, with fl ow modulation plate

®

• FTS0444-36V — Biotube

FT fi lter, 4-inch (100-mm) diameter,
44-inch (1118-mm) housing height, 36-inch (914-mm) cartridge
height, with vented plate

• FTS0444-36 — Biotube

®

FT fi lter, 4-inch (100-mm) diameter,
44-inch (1118-mm) housing height, 36-inch (914-mm) cartridge
height

®

• FT-CA0444-36-1 — Biotube

FT replacement fi lter cartridge,
4-inch (100-mm) diameter, 44-inch (1118-mm) housing height,
36-inch (914-mm) cartridge height

®

• FT-CA0436-28 — Biotube

FT replacement fi lter cartridge, 4-inch
(100-mm) diameter, 36-inch (914-mm) housing height, 28-inch
(711-mm) cartridge height

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

Biotube® FT Series Residential Effluent Filters

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 37

Orenco

®

| General Onsite Wastewater Products Catalog

Effl uent Filters

Biotube® FT Series Base Inlet
Effl uent Filters (FT)

Orenco® Biotube® FT Series Base Inlet Effl uent Filters remove about two­thirds of suspended solids from effl uent, helping extend drainfi eld life. They
have the fl ow area of a full-size fi lter in a small package for short septic
tanks. Biotube
Schedule 40 or Type 3034 outlet pipe of a new or existing tank. They come
with a fi lter cartridge, PVC housing, and an extendable PVC handle. An
optional overfl ow plate is available for 8-inch (200-mm) models, to prevent
effl uent from bypassing the fi lter if it clogs.

• 8-inch (200-mm) nominal fi lter diameter

• 14-inch (356-mm) fi lter height, standard

• 22-inch (559-mm) housing height, standard

• 1⁄8-inch (3-mm) or 1⁄16-inch (1.5-mm) fi lter mesh available

• Corrosion-proof construction

• Extendable handle

• Easy to clean

• Optional overfl ow plate available

• Optional fl oat elbow available for high-level alarm assembly

• High-level alarm assembly ordered separately (see “Float Switch As-

®

FT Series Base Inlet Effl uent Filters are installed on the

semblies” in the “Product Ordering Information” section of this catalog)

Biotube® FT Series Base Inlet Effluent Filters

Sample Product Codes*

• FT0822-14B — Biotube® FT fi lter, 8-inch (200-mm) diameter,
14-inch (356-mm) fi lter height, base inlet

®

• FT0822-14B-FSO — Biotube
14-inch (356-mm) fi lter height, base inlet, overfl ow plate installed

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

FT fi lter, 8-inch (200-mm) diameter,

PAGE 38

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Effl uent Filters

Biotube® FT Series Commercial
Effl uent Filters (FT)

Orenco® Biotube® FT Series Commercial Effl uent Filters remove about two­thirds of suspended solids from effl uent, helping extend drainfi eld life. They
are used in new or existing tanks, for commercial or heavy residential use.

®

FT Series Commercial Effl uent Filters come with a fi lter cartridge,

Biotube
PVC housing, and an extendable PVC handle. A slide rail is available as an
option for large fi lters, to make it easier to install and service them, and it is
required on fi lters for tanks that have only one access location.

• 8-inch, 12-inch, or 15-inch (200-mm, 300-mm, 375-mm ) nominal
fi lter diameters available

• 1⁄8-inch (3-mm) or 1⁄16-inch (1.5-mm) fi lter mesh available

• Corrosion-proof construction

• Extendable handle

• Easy to clean

• Optional slide rail for easy installation and tank access for servicing
(required for use in tanks with only one access)

• Optional fl oat bracket available for high-level alarm assembly

• High-level alarm assembly ordered separately (see “Float Switch As­semblies” in the “Product Ordering Information” section of this catalog)

®

Sample Product Codes*

• FT0854-36 — Biotube® FT fi lter, 8-inch (200-mm) diameter,
54-inch (1372-mm) housing height, 36-inch (914-mm) cartridge
height

®

• FT1254-36 — Biotube

FT fi lter, 12-inch (300-mm) diameter,
54-inch (1372-mm) housing height, 36-inch (914-mm) cartridge
height

• FT1254-36AR — Biotube

®

FT fi lter, 12-inch (300-mm) diameter,
54-inch (1372-mm) housing height, 36-inch (914-mm) cartridge
height, fl oat bracket and slide rail

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

Biotube® FT Series Commercial Effluent Filters

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 39

Orenco

®

| General Onsite Wastewater Products Catalog

Ultraviolet Disinfection Units

Orenco® Ultraviolet (UV) Disinfection units provide ultraviolet disinfection after advanced secondary wastewater treatment. In
side-by-side NSF
formance of other residential UV disinfection units.

®

testing, Orenco’s UV Disinfection Unit reduced bacteria by 99.999% (5 logs), meeting or exceeding the per-

PAGE 40

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

UV Disinfection Units

UV Disinfection Units

Orenco® UV Disinfection Units are designed for residential applications after
advanced secondary treatment (10 mg/L or less for CBOD
disinfection is required before dispersal. They require installation inside
a pump basin, gravity discharge basin, or a separate tank following an
advanced secondary treatment system. The power ballast, current sensor,
and controls are housed externally, to protect electronic components from
environmental damage.

• UL-recognized for US and Canada

2

• 125 µW/cm

lamp output

• Maximum contact time between lamp and effl uent

• Reduction of bacteria by 5 logs (99.999%)

• Quick-disconnect fi tting for easy inspection and unit cleaning

• Tefl on sleeve to protect lamp and minimize buildup and service intervals

• Power ballast and lamp current sensor housed in control panel (not in
wet well) to minimize failure due to environmental exposure

• Integrated components and controls — no piecemeal assemblies and
wiring

• 25- or 50-ft (7.6- or 15.2-m) power cord length

and TSS) when

5

®

Product Codes

• UV-125/31-UVIB — UV disinfection unit, 125 µW/cm2 output, 31-in.
(787-mm) lamp length, control panel with audible/visible alarms, 25-ft
(7.6-m) power cord

2

• UV-125/31-UVIB-50 — UV disinfection unit, 125 µW/cm

output, 31-in.
(787-mm) lamp length, control panel with audible/visible alarms, 50-ft
(15.2-mm) power cord

2

• UV-125/31-UVIBSUB — UV disinfection unit, 125 µW/cm

output,
31-in. (787-mm) lamp length, sub-panel for use with separate control
panel, 25-ft (7.6-m) power cord

• UV-125/31-UVIBSUB-50 — UV disinfection unit, 125 µW/cm
31-in. (787-mm) lamp length, sub-panel for use with separate control
panel, 50-ft
(15.2-mm) power cord

2

output,

Orenco UV-125/31-UVIB Ultraviolet Disinfection Unit

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 41

Orenco

®

| General Onsite Wastewater Products Catalog

Float Switches and

Assemblies

Orenco fl oat switches are used to signal liquid level positions for alarm and pump control applications. Float switch housings are
impact-resistant, noncorrosive PVC plastic for use in liquids up to 140° F (60° C). Float switch cords are fl exible, two-conductor
SJOW with a water-resistant neoprene coating. Float switch assemblies can be mounted in pump vaults, effl uent screens,
pump basins, and risers. All models are UL listed and CSA certifi ed for use in water or sewage. For information on ordering fl oat
switch assemblies that are designed to work with specifi c models of Orenco Controls’ standard control panels, contact your
Distributor or Orenco.

PAGE 42

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Float Switches, Assemblies, and Accessories

Float Switch Chart

®

Model Rating Type Normal State

P Signal Mechanical Open

N Signal Mechanical Closed

B Motor Mechanical Open

C Motor Mechanical Open

G Motor Mercury Open

Instrisically

safe

●

●

●

hp (kW) AC Voltage Amps

½ (0.37) 120 13

1 (0.75) 240 13

½ (0.37) 120 13

2 (1.49) 240 15

¾ (0.56) 120 15

2 (1.49) 240 15

Tether Length

in. (mm)

2.00

(50.9)

2.00

(50.9)

2.00-4.00

(50.9-101.6)

2.00-6.00

(50.9-152.4)

2.00-4.00

(50.9-101.6)

Drawdown

in. (mm)

2.00

(76.2)

2.00

(76.2)

4.00-4.75

(101.6-120.7)

5.50-9.50

(139.7-241.3)

4.50-5.50

(114.3-139.7)

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 43

Orenco

®

| General Onsite Wastewater Products Catalog

Float Switches, Assemblies, and Accessories

Signal-Rated, Mechanical (Non-Mercury)
Float Switches, “P”, “N” Models

Orenco® Signal-Rated Non-Mercury Float Switches are used with pump
control panels and alarms in areas where components containing mercury
are prohibited. They’re intended for low-amperage signals and aren’t
capable of carrying the current necessary to start or operate a pump. They
have a “drawdown” value — the difference in liquid level between the
switch’s activation and deactivation points.

“P” Model

• Normally-open default state (contact is open when fl oat switch is
hanging)

• Approved for intrinsically safe relays (very low amperage)

• Suitable for Orenco MVP and VCOM panels

• 2-inch (76-mm) drawdown

®

• Super Vu-Tron

cords: fl exible 2-conductor (UL, CSA) SJOOW

“P” Model Float Switch

“N” Model

• Normally closed default state (contact is open when fl oat switch is
fl oating)

• Approved for intrinsically safe relays (very low amperage)

• Suitable for electromechanical panels with “RO” option

• 2-inch (76-mm) drawdown

• Super Vu-Tron

®

cords: fl exible 2-conductor (UL, CSA) SJOOW

PAGE 44

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Float Switches, Assemblies, and Accessories

Motor-Rated, Mechanical (Non-Mercury)
Float Switches, “B,” “C” Models

Orenco® Motor-Rated Non-Mercury Mechanical Float Switches are
used with pump control panels and alarms in areas where components
containing mercury are prohibited. They are intended to carry starting
and operating current for a pump. They have a “drawdown” value — the
difference in liquid level between a fl oat switch’s activation and deactivation
points. The default state is normally-open (contact is open when fl oat switch
is hanging).

®

“B” Model

• Normally-open default state (contact is open when fl oat switch is
hanging)

• Ideal for areas where components containing mercury are prohibited

• ½-hp (0.37 kW), 120-VAC switch power or 1-hp (0.75 kW), 240-VAC
switch power

• 13 Amps (120-VAC and 240-VAC switches)

• 4.00-inch to 4.75-inch drawdown (100-mm to 120-mm)

“C” Model

• Normally-open default state (contact is open when fl oat switch is
hanging)

• Ideal for areas where components containing mercury are prohibited

• ½-hp (0.37 kW), 120-VAC switch power or 2-hp (1.49 kW), 240-VAC
switch power

• 13 Amps (120-VAC switch)

• 15 Amps (240-VAC switches)

• 5.50-inch to 9.50-inch drawdown (140-mm to 241-mm)

“B” Model Float Switch

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 45

Orenco

®

| General Onsite Wastewater Products Catalog

Float Switches, Assemblies, and Accessories

Motor-Rated Mercury Float Switches,
“G” Models

Orenco® Motor-Rated Mercury “G” model fl oat switches are used with
pump control panels and alarms, as well as to carry starting and operating
current for a pump. They have a “drawdown” value — the difference in
liquid level between a fl oat switch’s activation and deactivation points.

• Normally-open default state (contact is open when fl oat switch is
hanging)

• Approved for intrinsically safe relays (very low amperage)

• ¾-hp (0.56 kW), 120-VAC switch power or 2-hp (1.49 kW), 240-VAC
switch power

• 15 Amps (120-VAC and 240-VAC switches)

• 4.50-inch to 5.50-inch drawdown (120-mm to 140-mm)

Some jurisdictions restrict the use of products containing mercury.
Check local or state regulations for potential restrictions in your area.

“G” Model Float Switch

PAGE 46

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Float Switches, Assemblies, and Accessories

Float Switch Assemblies (MF)

Orenco® Float Switch Assemblies are preassembled with one or more fl oats
secured by fl oat collars mounted on a 1-inch (25-mm) PVC fl oat stem.

• Preassembled

• Easy to adjust in the fi eld with no special tools

• Quick-release clips

Sample Product Codes*

• MFPBN-27V — fl oat switch assembly; one “P” fl oat, one “B” fl oat, and
one “N” fl oat; 27-in (686-mm) stem length, for Biotube

• MF3P-33V — fl oat switch assembly; three “P” fl oats, 33-inch (838­mm) stem length, for Biotube pump vault

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

®

pump vault

®

Float Switch Collars (MFCOLLAR)

Orenco® Float Switch Collars are the simplest, most reliable way to attach a
fl oat switch to a Schedule 40 PVC fl oat switch stem.

• Secure, non-slip attachment for fl oat switches

• Models for 1-inch to 3-inch (25-mm to 75-mm) Schedule 40 PVC
fl oat switch stems

• Durable ABS construction

• No special tools required for mounting or adjusting

• Quick-release clip

• Works with 18/2 and 16/2 AWG cords (MFCOLLAR1) or 16/3 AWG
cords (MFCOLLAR1L)

Product Codes

• MFCOLLAR1 — fi ts 1-inch (25-mm) pipe, 18/2 and 16/2 AWG cords
for type A, B, C, N, and P fl oat switches

• MFCOLLAR1L — fi ts 1-inch (25-mm) pipe, 16/3 AWG cords, for type
D and G fl oat switches

• MFCOLLAR1.25 — adjustable collar for 1-inch to 3-inch (25- to 75­mm) pipe, 18/2 and 16/2 AWG cords for type A, B, C, N, and P fl oat
switches

• MFCOLLAR2 — fi ts 1-inch (25-mm) pipe, short throw to accommo­date bottom fl oat for PV-style pump vaults

Including Three Floats and Float Collars

Float Switch Assembly

MFCOLLAR1 Float Collar

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 47

Orenco

®

| General Onsite Wastewater Products Catalog

Float Switches, Assemblies, and Accessories

Float Brackets (PBFB, RRFB)

Orenco® Float Brackets are installed on the inside of a PVC access riser for
mounting a fl oat stem and fl oat switches. Two models are available.

• PBFB model adhesive-mounts close to riser wall

• RRFB model bolts into riser wall for offset mount so stem aligns to
tank opening

• Accepts 1-inch NPS (25-mm DN) fl oat switch stem

• Ideal for system upgrades and repairs

Product Codes

• PBFB — adhesive-mount fl oat bracket; includes set screw, adhesive
ordered separately

• RRFB — bolt-on fl oat bracket; includes mounting hardware and
wrench

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

RRFB Float Bracket

PAGE 48

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Float Switches, Assemblies, and Accessories

®

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 49

Orenco

®

| General Onsite Wastewater Products Catalog

Splice Boxes and

Accessories

Orenco® Splice Boxes are used to house spliced wire connections between an electrical control panel and equipment, such as
effl uent pumps and fl oat switches. Internal and external splice boxes are available. Accessories such as cord grips and water­proof wire nuts provide watertight clamping of fl oat switch cords and positive electrical connections in splices.

PAGE 50

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Splice Boxes and Accessories

Internal Splice Boxes (SB)

Orenco® Internal Splice Boxes are installed inside of access risers to house
spliced wire connections between an electrical control panel and equip­ment, such as effl uent pumps and fl oat switches. Orenco Internal splice
boxes come standard with one to six watertight cord grips. Included are
waterproof wire nuts, a neoprene sealing gasket, and four stainless steel lid
screws.

• Conforms to UL 514C, CSA C22.2 No. 85 1968

• Type 4X (IP66) rated

• Neoprene sealing gasket included

• Stainless steel lid screws included

• Waterproof wire nuts included

• One to six ½-inch (15-mm) cord grips, standard

• Cord grips available for ¾-inch (19-mm) AWG cord and CE-rated

1.5 × 3 fl at cable

• 15⁄8-inch (41-mm) standard conduit coupling length for PVC risers

• 3¼-inch (82-mm) conduit coupling length for concrete risers

®

Orenco Internal Splice Box

(Shown with Cord Grips, Electrical Cords, and Waterproof Wire Nuts)

Sample Product Codes*

• SB3 — includes three ½-inch (15-mm) cord grips, 15⁄8-inch
(41-mm) standard conduit coupling

• SB3G — includes two ½-inch (15-mm) cord grips, one ¾-inch
(19-mm) cord grip, 15⁄8-inch (41-mm) standard conduit coupling

• SB4 — includes four ½-inch (15-mm) cord grips, 15⁄8-inch (41-mm)
standard conduit coupling

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 51

Orenco

®

| General Onsite Wastewater Products Catalog

Splice Boxes and Accessories

External Splice Boxes (SBEX)

Orenco® External Splice Boxes are installed outside of access risers to
house spliced wire connections between an electrical control panel and
equipment, such as effl uent pumps and fl oat switches. Its separate conduit
hubs, large volume, and optional dividers make it useful for maintaining
isolation of high and low voltage wires where needed. Each External Splice
Box is provided with a hole-cutting template to simplify installation on the
riser and a 4-inch (100-mm) diameter grommet for the riser penetration.

• Type 6X rated for prolonged submergence

• Constructed of UL-rated PVC alloy

• Buna rubber sealing ring

• Four Type 6X-rated, ½-inch (15-mm) cord grips included, standard

• Three EPDM rubber cord grip plugs included, standard

• 100 in.3 (1639 cm3) volume for easy wiring access

• Bottom entry to maintain minimum burial depth

• Easy inspection without removing riser lid

Sample Product Code*

• SBEX-1-4 — Splice box

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

Orenco External Splice Box

PAGE 52

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Splice Boxes and Accessories

Conduit Seal Kits (SBCS)

Orenco® Conduit Seal Kits create a watertight, gastight seal between a
conduit and a splice box that prevents the passage of liquids, vapors, and
fl ames. They include a seal fi tting, fi ber batting, and pipe cement.

• UL-listed

• ¾-inch (19-mm) and 1-inch (25-mm) conduit sizes

• Aluminum seal fi tting

Product Codes

• SBCS075 — Conduit seal kit, for ¾-inch (20-mm) diameter conduit

• SBCS100 — Conduit seal kit, for 1-inch (25-mm) diameter conduit

Cord Grips (SBCG)

Orenco® Cord grips provide watertight strain relief for fl oat cables, pump
cables, and other wiring running into Orenco internal or external splice
boxes. Cord grips to accommodate single and three-phase CE-rated

1.5 × 3 fl at cords are also available.

• Type 4X (IP66) or Type 6X ratings available

• ½-inch (15-mm) NPT threads on standard cord grips

• ¾-inch (19-mm) NPT threads on large cord grips

• 212° F (100° C) maximum temperature rating

®

SBCS 100 Conduit Seal Kit

Product Codes

• SBCG — for 0.17 to 0.47 inch (4.3 to 12 mm) cord diameters, Type
4X (IP66) rated, ½-inch (15-mm) NPT threads

• SBCGL — for 0.45 to 0.70 inch (11 to 18 mm) cord diameters, Type
4X (IP66) rated, ¾-inch (19-mm) NPT threads

• SBCG6 — for 0.17 to 0.47 inch (4.3 to 12 mm) cord diameters, Type
6X rated, ½-inch (15-mm) NPT threads

• SBCG6L — for 0.45 to 0.70 inch (11 to 18 mm) cord diameters, Type
6X rated, ¾-inch (19-mm) NPT threads

Orenco Cord Grips

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 53

Orenco

®

| General Onsite Wastewater Products Catalog

Splice Boxes and Accessories

Waterproof Wire Nuts (SBAB)

Orenco® Waterproof Wire Nuts provide waterproof connections between
wires in spice boxes. Two sizes are available, small and large. They are not
reusable.

• 600-V

• Rated for outdoor connections

Product Codes

• SBABRKING — small, Type 4X (IP66) rated, ½-inch (15-mm) NPT
threads

• SBABOKING — large, Type 4X (IP66) rated, ¾-inch (19-mm) NPT
threads

For capacities of Orenco’s waterproof wire nuts, see the table below

Orenco Waterproof Wire Nuts

Wire Nut Capacities

Connectors are rated for outdoor connections with the following wire combinations:

Large Connector, 600 V Small Connector, 600 V

One 10 AWG and one 12 AWG Two 14 AWG
One 10 AWG and one 14 AWG One 14 AWG and one 16 AWG
Two-to-four 12 AWG One 14 AWG and one or two 18 AWG
One 12 AWG and one-to-four 14 AWG Two 16 AWG and one or two 18 AWG
One 12 AWG and two-to-four 16 AWG Two 16 AWG
One 12 AWG and three 18 AWG One 16 AWG and one 18 AWG
Two-to-four 14 AWG Two to four 18 AWG

Two-to-six 16 AWG

PAGE 54

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

®

Alarm Panels

Alarm panels manufactured by Orenco® provide “stand alone” visible and audible alarm notifi cations of undesirable liquid levels
inside of tanks. They are typically used to indicate a high liquid-level condition in a system that does not use a discharge pump.
Inputs are typically provided by a single fl oat switch. Alarm panels are also used as remote alarms in water, wastewater, and
other systems.

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 55

Orenco

®

| General Onsite Wastewater Products Catalog

Alarm Panels

A Series Simplex Alarm Panels

A Series simplex panels from Orenco Controls® are used to control pump
motors and alarm functions in simplex pumping systems. They are intended
as a low-cost option for pump controls into gravity or pressurized drainfi elds
or for Effl uent Sewers (aka STEP sewers or Septic Tank Effl uent Pumping
Systems), especially where cost is the critical factor.

• Low-cost

• 120-VAC controls circuit breaker

• 120- or 120/240-VAC pump circuit breaker

• 7⁄8-in (22-mm) red visible alarm

• 95 dB audible alarm

• Automatic alarm silence reset

• Type 4X (IP 66) rated enclosure

• Motor-rated pump on/off fl oat switch ordered separately

• Limited optional features available

Sample Product Codes*

• A1

• A1R0

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

A1R0 Simplex Alarm Panel

PAGE 56

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Alarm Panels

AMAHW Liquid Level Alarm Panel

The AMAHW liquid level alarm panel from Orenco Controls® is a 120-VAC,
stand-alone alarm panel with an automatic alarm reset function. It has a
watertight enclosure rated for indoor or outdoor use. The AMAHW can be
used as a remote alarm panel when supplied with a 120-VAC signal from a
primary control panel.

• 120-VAC

• 7⁄8-in (22-mm) red visible alarm

• 95 dB audible alarm

• Automatic alarm reset

• Type 4X (IP 66) rated enclosure

• Indoor or outdoor use

• Signal-rated fl oat switch ordered separately

Product Code

• AMAHW — 120 VAC liquid level alarm panel, indoor/outdoor use,
automatic alarm reset

®

AMAHW Liquid Level Alarm Panel

AMLAHW Liquid Level Alarm Panel

The AMLAHW liquid level alarm panel from Orenco Controls® is a 120-VAC,
stand-alone alarm panel with a two-position toggle switch for silencing the
audible alarm during alarm conditions. It has a watertight enclosure rated
for indoor or outdoor use. The AMLAHW can be used as a remote alarm
panel when supplied with a 120-VAC signal from a primary control panel.

• 120-VAC

• 7⁄8-in (22-mm) red alarm light

• 95 dB audible alarm

• “Auto/Silence” 2-position booted toggle switch

• Type 4X (IP 66) rated enclosure

• Indoor or outdoor use

• Signal-rated fl oat switch ordered separately

Product Code

• AMLAHW — 120 VAC liquid level alarm panel, indoor/outdoor use,
two-position manual alarm silence switch

AMLAHW Liquid Level Alarm Panel

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 57

Orenco

®

| General Onsite Wastewater Products Catalog

Alarm Panels

AMSGBA Single-Gang Alarm Box

The AMSGBA single-gang alarm box from Orenco Controls® is an in-wall
remote alarm, designed to fi t into a single-gang outlet box inside of a build­ing.

• 120 VAC only

• 7⁄8-in (22-mm) red alarm light

• 82 dB audible alarm

• Manual alarm reset

• Indoor use only

• Signal-rated fl oat switch ordered separately

Product Code

• AMSGBA — 120 VAC single-gang alarm box

AMSGBA Single-Gang Alarm Box

PAGE 58

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Alarm Panels

9 VDC Liquid Level Alarm Panels

The Sentinel series of 9 VDC alarm panels from Orenco Controls® are
designed to provide liquid level alarm functions in remote locations without
120 VAC power or in indoor/outdoor applications where only 120 VAC outlet
power is available.

• 9 VDC with battery included (AMSENTII and AMSENTII-W)

• AC adapter (AMSENTI only)

• Red LED alarm light

• 85 db audible alarm (AMSENTI and AMSENTII)

• 80 db audible alarm (AMSENTII-W)

• “Test/Silence/Auto” toggle switch

• Indoor use only (AMSENTI and AMSENTII)

• Type 4X (IP 66) rated enclosure for indoor or outdoor use
(AMSENTII-W only)

• Signal-rated fl oat switch ordered separately

Product Codes

• AMSENTI — 9 VDC liquid level alarm, AC adapter included, audible/
visible alarm, indoor use only

• AMSENTII — 9 VDC liquid level alarm, battery included, audible/visible
alarm, indoor use only

• AMSENTII-W — 9 VDC liquid level alarm, battery included, audible/
visible alarm, Type 4X enclosure, indoor/outdoor use

®

AMSENTI Sentinel Liquid Level Alarm

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 59

Orenco

®

| General Onsite Wastewater Products Catalog

Hydrosplitters and

Accessories

Orenco® Hydrosplitters are used to dose fi ltered or screened effl uent by pressure or gravity to multiple distribution zones. Each
one is custom-built to the specifi c needs of a particular drainfi eld or system.

PAGE 60

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Hydrosplitters and Accessories

Hydrosplitters (HS)

Orenco® Hydrosplitters are used to provide equal doses of screened effl uent
to multiple laterals or zones in gravity drainfi elds, regardless of the length
of the laterals used in the drainfi eld. Typically, a dose pump is used to
transport effl uent to the hydrosplitter, which then doses all of the drainfi eld
laterals by gravity.

• Works with pump or siphon discharge to hydrosplitter

• Schedule 40 PVC construction

• ½-inch to 4-inch NPS (15-mm to 100-mm DN) sizes available for
fi ttings, unions, and fl ow controllers

• ½-inch to 2-inch NPS (15-mm to 50-mm DN) sizes available for fl ex­ible outlet hose

• Flow Control Discs sold separately

• Flow Control Disc orifi ces sized in 1⁄64-inch (0.396-mm) increments

Each Hydrosplitter is built to the specifi c needs of a particular drainfi eld. For
information on ordering a Hydrosplitter for your project, call Orenco.

®

Hydrosplitter Enclosures (HSRR)

Orenco® Hydrosplitter Enclosures are used to provide a secure, protective
housing for hydrosplitters.

• PVC construction

• Standard 24-inch and 30-inch nominal diameter (600-mm or
750-mm DN) enclosures available

• Standard 12-inch, 18-inch, and 24-inch (305-mm, 457-mm, and
610-mm) enclosure heights available

• Allows easy transport and discharge line installation

• Secures and protects hydrosplitter manifold

• Easy access for O&M

Sample Product Codes*

• HSRR24XX — XX = 12-inch, 18-inch, or 24-inch enclosure height
(305-mm, 457-mm, and 610-mm)

• HSRR30XX — XX = 12-inch, 18-inch, or 24-inch enclosure height
(305-mm, 457-mm, and 610-mm)

Orenco Hydrosplitter

* For the full range of standard options, see the “Product Ordering

Information” section in this catalog.

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

Orenco Hydrosplitter Enclosure

®

AT 800-348-9843 • FAX: [phone]

PAGE 61

Orenco

®

| General Onsite Wastewater Products Catalog

Hydrosplitters and Accessories

Flow Control Discs and Assemblies (FC)

Orenco® Flow Control Discs and Flow Control Assemblies are used in pres­surized distribution systems to equalize fl ow in laterals of varying elevations
and lengths. The size of the orifi ce in the fl ow control assembly is based on
multiple factors.

• ½-inch, 1-inch, 1¼-inch, 1½-inch, and 2-inch NPS diameters avail­able for Flow Control Discs (15-mm, 25-mm, 32-mm, 40-mm, and
50-mm DN)

• 1-inch, 1¼-inch, 1½-inch, and 2-inch NPS diameters available for
Flow Control Assemblies (25-mm, 32-mm, 40-mm, and 50-mm DN)

• Flow Control Disc orifi ces sized in 1⁄64-inch (0.396-mm) increments

• Blank Flow Control Discs are available

Call Orenco or your Distributor for assistance with orifi ce sizing.

Orenco Flow Control Disc and Assembly

PAGE 62

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Carbon Filters and

Accessories

Orenco® offers several sizes of carbon fi lters for residential and commercial wastewater systems. They are designed to reduce
the odor of sewage gases in systems that ventilate using passive airfl ow.

®

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 63

Orenco

®

| General Onsite Wastewater Products Catalog

Carbon Filters and Accessories

CF Carbon Filters

Orenco® CF Carbon Filters are passive ventilation fi lters used to reduce
the odor of sewage gases in systems that ventilate using passive airfl ow.
They are easy to attach to a vent pipe. CF carbon fi lters use activated
impregnated carbon in replaceable packages. The cap is removable to allow
replacement of the carbon package.

• 3-inch, 4-inch, and 6-inch NPS diameters (80-mm, 100-mm and
150-mm DN)

• Slip-fi t

• UV-resistant

• ABS and PVC construction (CF3 and CF4)

• Fiberglass and PVC construction (CF6 )

• Polyethylene screen plate

• Replaceable carbon packages

Sample Product Codes*

• CF3 — carbon fi lter for 3-inch NPS (80-mm DN) PVC pipe

• CF4 — carbon fi lter for 4-inch NPS (100-mm DN) PVC pipe

• CF6 — carbon fi lter for 6-inch NPS (1500-mm DN) PVC pipe

CF3 Carbon Filter

CFR Carbon Filter Recharge Packages

Orenco® CFR Carbon Filter Recharge Packages provide a clean, simple
way to replace the carbon material in an Orenco CF Carbon Filter or Orenco
Fiberglass Access Lid equipped with carbon fi ltration.

• Activated, impregnated carbon material

• Pre-sized for Orenco Carbon Filters

Product Codes

• CFR3 — recharge package for CF3 fi lters

• CFR4 — recharge package for CF4 fi lters

• CFR12 — recharge package for fi berglass access lids equipped with
carbon fi ltration (requires one package) or for CF6 fi lters (requires two
packages)

CFB Carbon Filter Bushings

Orenco® CFR Carbon Filter Bushings are used to adapt an Orenco CF3 or
CF4 Carbon Filter to an existing vent outlet of a smaller diameter.

Product Codes

• CFB32 — 3-inch to 2-inch NPS (75-mm to 50-mm DN) reducer

• CFR42 — 4-inch to 2-inch NPS (100-mm to 50-mm DN) reducer

• CFR43 — 4-inch to 3-inch NPS (100-mm to 75-mm DN) reducer

CF6 Carbon Filter and CFR Recharge Packages

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

PAGE 64

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

CFB32 Carbon Filter Bushing

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Miscellaneous Onsite

Wastewater Products

Orenco offers a wide assortment of miscellaneous products for general onsite use, including unions and valves, orifi ce shields,
valve boxes, and fl ushing assemblies.

®

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 65

Orenco

®

| General Onsite Wastewater Products Catalog

Miscellaneous Onsite Wastewater Products

Unions (U)

Unions are used as a disconnection point in piping assemblies. ½-inch
through 2-inch sizes available with slip fi t or threaded connections; 3-inch
and 4-inch sizes available with slip fi t only.

• Schedule 80 PVC construction

• EPDM O-ring

• ½-inch, ¾-inch, 1-inch, 1¼-inch, 1½-inch, 2-inch, 3-inch, and 4-inch
NPS sizes available

Sample Product Codes*

• U1000S — Union, 1-inch (25-mm), slip fi t

• U1000T — Union, 1-inch (25-mm), threaded

• U1250S — Union, 1¼-inch (32-mm), slip fi t

• U1250T — Union, 1¼-inch (32-mm), threaded

• U1500S — Union, 1½-inch (40-mm), slip fi t

• U1500T — Union, 1½-inch (40-mm), threaded

• U2000S — Union, 2-inch (50-mm), slip fi t

• U2000T — Union, 2-inch (50-mm), threaded

Unions

Quick-Disconnect Unions (Q)

Quick-disconnect unions are used as a fast, non-binding disconnection
point in piping assemblies. Available in slip fi t only.

• Schedule 80 PVC construction

• Slip fi t only

• 1-inch, 1¼-inch, 1½-inch, and 2-inch NPS sizes available

Product Codes

• Q1000S — quick-disconnect union, 1-inch (25-mm), slip fi t

• Q1250S — quick-disconnect union, 1¼-inch (32-mm), slip fi t

• Q1500S — quick-disconnect union, 1½-inch (40-mm), slip fi t

• Q2000S — quick-disconnect union, 2-inch (50-mm), slip fi t

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

Quick-Disconnect Unions

PAGE 66

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Miscellaneous Onsite Wastewater Products

Low-Pressure Gate Valves (V)

Sliding gate valves are used as an inexpensive valve for quick shut-off.
Available in slip fi t only.

• PVC body (per ASTM D-1784)

• Stainless steel paddle and shaft

®

• Santoprene

• Slip fi t only

• 4-inch, 6-inch, and 8-inch NPS sizes available

Product Codes

• V6201S — low pressure gate valve, 2-inch (50-mm) diameter,
slip fi t

• V6401S — low pressure gate valve, 4-inch (100-mm) diameter,
slip fi t

• V6601S — low pressure gate valve, 6-inch (150-mm) diameter,
slip fi t

• V6801S — low pressure gate valve, 8-inch (200-mm) diameter,
slip fi t

seal

®

High-Pressure Gate Valves (VG)

PVC high pressure gate valves are used in controlling fl ows and where
throttling capabilities are desired. These valves are constructed of Schedule
40 High-Impact PVC type II per ASTM D-1785, with polypropylene paddles.
All sizes are available with slip fi t or threaded connections.

• Schedule 40 high-impact PVC Type II body (per ASTM D-1785)

• Screw-in, faucet-type handle

• Polypropylene paddle

• Non-rising stem

• Slip fi t or threaded connections

• 1-inch, 1¼-inch, 1½-inch, and 2-inch NPS sizes available

Product Codes

• VG1000S — high-pressure gate valve, 1-inch (25-mm), slip fi t

• VG1000T — high-pressure gate valve, 1-inch (25-mm), threaded

• VG1250S — high-pressure gate valve, 1¼-inch (32-mm), slip fi t

• VG1250T — high-pressure gate valve, 1¼-inch (32-mm), threaded

• VG1500S — high-pressure gate valve, 1½-inch (40-mm), slip fi t

• VG1500T — high-pressure gate valve, 1½-inch (40-mm), threaded

• VG2000S — high-pressure gate valve, 2-inch (50-mm), slip fi t

• VG2000T — high-pressure gate valve, 2-inch (50-mm), threaded

Low-Pressure Gate Valve

High-Pressure Gate Valve

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 67

Orenco

®

| General Onsite Wastewater Products Catalog

Miscellaneous Onsite Wastewater Products

Ball Valves (VLT)

PVC ball valves are used for shutting off fl ow to a distribution line. All sizes
are available with either slip fi t or threaded connections.

• Schedule 40 PVC Type II body

• EPDM O-ring

• Pre-loaded stem seal

• Slip fi t or threaded connections available for all sizes

• ½-inch, ¾-inch, 1-inch, 1¼-inch, 1½-inch, and 2-inch NPS sizes
available

Sample Product Codes*

• VLT1000S — PVC ball valve, 1-inch (25-mm), slip fi t

• VLT1000T — PVC ball valve, 1-inch (25-mm), threaded

• VLT1500S — PVC ball valve, 1½-inch (40-mm), slip fi t

• VLT1500T — PVC ball valve, 1½-inch (40-mm), threaded

• VLT2000S — PVC ball valve, 2-inch (50-mm), slip fi t

• VLT2000T — PVC ball valve, 2-inch (50-mm), threaded

Ball Valve

True Union Ball Valves (VTU)

True union ball valves combine the features of a PVC union and ball valve
into one component.

• Schedule 80 PVC construction

• EPDM O-rings

• 1-inch, 1¼-inch, 1½-inch, 2-inch, 3-inch, and 4-inch NPS sizes
available

• Includes slip fi t and threaded connections in 1-inch through 2-inch
sizes

• Available with slip fi t or threaded connections in 3-inch and 4-inch
sizes

Sample Product Codes*

• VTU1000 — true union ball valve, 1-inch (25-mm), slip fi t and
threaded connections

• VTU1250 — true union ball valve, 1¼-inch (32-mm), slip fi t and
threaded connections

• VTU1500 — true union ball valve, 1½-inch (40-mm), slip fi t and
threaded connections

• VTU2000 — true union ball valve, 2-inch (50-mm), slip fi t and
threaded connections

• VTU4000S — true union ball valve, 4-inch (100-mm), slip fi t

True Union Ball Valve

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

PAGE 68

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Miscellaneous Onsite Wastewater Products

Check Valves (KSC)

Check valves prevent backfl ow in a system, providing minimal resistance
to normal fl ow but only requiring ½ lb (0.2 kg) back pressure for complete
closure.

• Schedule 40 high-impact PVC Type II body (per ASTM D-1785)

• EPDM swing gate

• 1-inch, 1¼-inch, 1½-inch, 2-inch, 3-inch, and 4-inch NPS sizes
available

• Slip fi t or threaded connections available for all sizes

®

Sample Product Codes*

• KSC1000S — check valve, 1-inch (25-mm), slip fi t

• KSC1000T — check valve, 1-inch (25-mm), threaded

• KSC1250S — check valve, 1¼-inch (32-mm), slip fi t

• KSC1250T — check valve, 1¼-inch (32-mm), threaded

• KSC2000S — check valve, 2-inch (50-mm), slip fi t

• KSC2000T — check valve, 2-inch (50-mm), threaded

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

Check Valve

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 69

Orenco

®

| General Onsite Wastewater Products Catalog

Miscellaneous Onsite Wastewater Products

Orifi ce Shields

Orenco® Orifi ce Shields are used in a pressurized distribution system to
protect the orifi ces from backfi ll debris that might cause orifi ce blockage.

• Snap-fi t on top of or beneath a lateral, depending on the location of
the orifi ce

• Installs on top of lateral or underneath lateral

• Orifi ce Shields available to fi t ¾-inch, 1-inch, 1¼-inch, 1½-inch, and
2-inch NPS sizes

Product Codes

• OS075 — fi ts ¾-inch NPS (20-mm DN) lateral pipe

• OS100 — fi ts 1-inch NPS (25-mm DN) lateral pipe

• OS125 — fi ts 1¼-inch NPS (32-mm DN) lateral pipe

• OS150 — fi ts 1½-inch NPS (40-mm DN) lateral pipe

• OS200 — fi ts 2-inch NPS (50-mm DN) lateral pipe

Orenco Orifice Shields

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

PAGE 70

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Miscellaneous Onsite Wastewater Products

Valve Boxes

Orenco® Valve Boxes are used to provide access to fl ushing assemblies and
distributing valve assemblies in onsite wastewater systems.

• Durable polyethylene construction

Product Codes

• VB7 — 7-inch (178-mm) diameter, 10-inch (254-mm) deep round
model

• VB1217 — 12-inch × 17-inch (305-mm × 432-mm) 10-inch
(254-mm) deep rectangular model

• VBX1217 — 6-inch (150-mm) extension for VB1217 valve box,
ordered separately

Flushing Assemblies

®

Orenco® Flushing Assemblies provide easy access to drainfi eld laterals for
maintenance.

• PVC construction

• End cap or ball valve available

• Available kit includes 7-inch (178-mm) diameter valve box

Sample Product Codes*

• SEA075V — fl ushing assembly, ¾-inch nominal diameter (20-mm
DN) sweep ell with ball valve

• SEA125C — fl ushing assembly, 1¼-inch nominal diameter (32-mm
DN) sweep ell with cap

• SEA125V — fl ushing assembly, 1¼-inch nominal diameter (32-mm
DN) sweep ell with ball valve

* For the full range of available product options, contact your local Orenco
Distributor or Orenco.

VB7 Valve Box

Orenco Flushing Assembly

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 71

Orenco

®

| General Onsite Wastewater Products Catalog

Product Ordering Information

PAGE 72

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Ultra-Rib™ Access Risers

A product code diagram that describes standard options available for Orenco’s Ultra-Rib™access risers is provided below. When selecting options for the
product code, please use the ranking order provided in the diagram.

Product Code Diagram

®

R

+ +

Discharge grommet option, in. (mm):
Blank = no discharge grommet
10 = 1 (25)
12 = 1¼ (32)
15 = 1½ (38)
20 = 2 (50)

Splice box grommet or splice box options (choose one):
Blank = no grommet or splice box

or

S = grommet installed,1-in. (25-mm), fits SB1-SB4
L = grommet installed,1¼-in. (32-mm), fits SB5-SB6
SX = hole drilled for Orenco

®

external splice box

†

or

S1 = grommet and SB1 internal splice box installed
S2 = grommet and SB2 internal splice box installed
S3 = grommet and SB3 internal splice box installed
S4 = grommet and SB4 internal splice box installed
L5 = grommet and SB5 internal splice box installed
L6 = grommet and SB6 internal splice box installed

or

XS = grommet and simplex explosion-proof splice box installed
XD = grommet and duplex explosion-proof splice box installed
XT = grommet and triplex explosion-proof splice box installed

‡

‡

‡

Riser height in inches (3-in. increments standard)

Riser diameter:
12 = 12-in. (300-mm)*
18 = 18-in. (450-mm)*
21 = 21-in. (525-mm)
24 = 24-in. (600-mm)

Riser type code:
R = 12-in. (300-mm), 21-in. (525-mm), and 24-in. (600-mm) diameters
U = 18-in. (450-mm) diameter
PU = bulk Ultra-Rib™ pipe, all diameters

Riser, Ultra-Rib

* Not intended for use over pump vaults

†

Requires minimum 18-in. (457-mm) riser height

‡

For Class I Division I environments

ACT-PRD-GOP-1, REV. 2.0

™

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 73

Orenco

®

| General Onsite Wastewater Products Catalog

Kor-Flo™ Access Risers

A product code diagram that describes standard options available for Orenco’s Kor-Flo™ access risers is provided below. When selecting options for the
product code, please use the ranking order provided in the diagram.

Product Code Diagram

RR 30

Ribbed Riser, Kor-Flo
* Requires minimum 18-in. (457-mm) riser height
** For Class I Division I environments

+ +

Splice box grommet or splice box options (choose one):
Blank = no grommet or splice box

or

S = grommet installed,1-in. (25-mm), fits SB1-SB4
L = grommet installed,1¼-in. (32-mm), fits SB5-SB6
SX = hole drilled for Orenco

or

S1 = grommet and SB1 internal splice box installed
S2 = grommet and SB2 internal splice box installed
S3 = grommet and SB3 internal splice box installed
S4 = grommet and SB4 internal splice box installed
L5 = grommet and SB5 internal splice box installed
L6 = grommet and SB6 internal splice box installed

or

XS = grommet and simplex explosion-proof splice box installed**
XD = grommet and duplex explosion-proof splice box installed**
XT = grommet and triplex explosion-proof splice box installed**

Riser height in inches (2-in. increments standard)

30-inch (750-mm) riser diameter:

®

Discharge grommet option, in. (mm):
Blank = no discharge grommet
10 = 1 (25)
12 = 1¼ (32)
15 = 1½ (38)
20 = 2 (50)

®

external splice box*

Small-Diameter Access Risers

A product code diagram that describes standard options available for Orenco’s small-diameter access risers (Class 63 IPS or PIP) is provided below. When
selecting options for the product code, please use the ranking order provided in the diagram.

Product Code Diagram

RR

Riser height in inches (3-inch increments standard)

Riser diameter, in. (mm):
08 = 8 (200)
12 = 12 (300)

Riser, small diameter

PAGE 74

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

®

Grade Rings and Grade Ring Inserts

Product code diagrams that describes standard options available for Orenco’s grade rings and grade ring inserts is provided below. When selecting options
for the product code, please use the ranking order provided in the diagram.

Product Code Diagram

GR

Grade ring height, in inches

Grade ring diameter:
12 = 12-in. (300-mm) 18 = 18-in. (450-mm)
21 = 21-in. (525-mm) 24 = 24-in. (600-mm)
30 = 30-in. (750-mm) 36 = 36-in. (900-mm)

Riser pipe style:
Blank = Kor-FLo™, Perma-Loc, and Ultra-Rib™ in
21-, 24-, 30-, 36-in. (525-, 600-, 750, 900-mm) diameters
U = Ultra-Rib™ in 12- and 18-in. (300- and 450-mm) diameters

Grade ring

1

For 24-in. (600-mm) grade rings only

Riser-to-lid adapter option:
Blank = no RLA
RLA = RLA-style insert

1

GR

I

Riser pipe diameter:
12 = 12-in. (300-mm) 18 = 18-in. (450-mm)
21 = 21-in. (525-mm) 24 = 24-in. (600-mm)
30 = 30-in. (750-mm) 36 = 36-in. (900-mm)

Insert

Riser pipe style:
Blank = Kor-FLo™, Perma-Loc, and Ultra-Rib™ in
18-, 21-, 24-, 30-, 36-in. (450-, 525-, 600-, 750-, 900-mm) diameters
U = Ultra-Rib™ in 12-in. (300-mm) diameter

Grade ring

DuraFiber™ Fiberglass Access Lids

A product code diagram that describes standard options available for Orenco’s DuraFiber™ fi berglass access lids is provided below. When selecting options
for the product code, please use the ranking order provided in the diagram.

Product Code Diagram

FLD

Color and logo options:
Blank = green color lid
B = brown color lid
C = custom logo
ATX = AdvanTex
W = warning label

Insulation:*
Blank = no insulation
I2 = 2-inch (50-mm) insulation installed
I4 = 4-inch (100-mm) insulation installed

Vent and filter options:
Blank = no vent or filter options
V = vent
CF = carbon filter

Gasket options:
G = gasket (standard)
Blank = no gasket

Lid diameter, in. (mm):
24 = 24 (600)
30 = 30 (750)

™

DuraFiber

* Insulation has an R-value of 10 per 2-inch (50-mm) increment.

fiberglass lid

®

logo

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 75

Orenco

®

| General Onsite Wastewater Products Catalog

FLF-Series Fiberglass Access Lids

A product code diagram that describes standard options available for Orenco’s fi berglass access lids is provided below. When selecting options for the
product code, please use the ranking order provided in the diagram.

Product Code Diagram

FLF

Lid diameter, in. (mm):
18 = 18 (450)
21 = 21 (525)
30 = 30 (750)

Fiberglass lid, FLF-series

* Lid insulation has an R-value of 10 per 2-inch (50-mm) increment

Note: For fiberglass basin bottoms without holes, order FLF18 or FLF21

-

Color and logo options:
Blank = green color lid
B = brown color lid
C = custom logo
ATX = AdvanTex® logo

Lid options:
G = gasket
V = vent
CF = carbon filter installed in lid
I2 = 2-in. (50-mm) insulation
I4 = 4-in. (100-mm) insulation

*

Fiberglass Access Caps

A product code diagram that describes standard options available for Orenco’s fi berglass access caps is provided below. When selecting options for the
product code, please use the ranking order provided in the diagram.

Product Code Diagram

FL

Attachment method options:
Blank = slip fit
S = side screw
T = top bolt
TU = top bolt, for 12-in. (300-mm) Ultra-Rib

Gasket options:
Blank = no gasket, standard
G = gasket

Lid diameter, in. (mm):
8 = 8 (200)
12 = 12 (300)
15 = 15 (375)

Fiberglass lid

Color and non-skid options:
Blank = green color, non-slip surface
W = white color, smooth surface

™

risers

PAGE 76

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

®

Fiberglass Basins

A product code diagram that describes standard options available for Orenco’s fi berglass basins is provided below. When selecting options for the product
code, please use the ranking order provided in the diagram.

Product Code Diagram

PBF

++

Splice box grommet or splice box options (choose one):
Blank = no grommet or splice box

or

S = grommet installed,1-in. (25-mm), fits SB1-SB4
L = grommet installed,1¼-in. (32-mm), fits SB5-SB6
SX = hole drilled for Orenco

or

S1 = grommet and SB1 internal splice box installed
S2 = grommet and SB2 internal splice box installed
S3 = grommet and SB3 internal splice box installed
S4 = grommet and SB4 internal splice box installed
L5 = grommet and SB5 internal splice box installed
L6 = grommet and SB6 internal splice box installed

Inlet option:
Blank = no cleanout
COV = cleanout vent included (4-in. only)
PVC = glassed-in PVC fitting

Flow inducer option:
Blank = no flow inducer
FI = flow inducer included

+

Discharge grommet option, in. (mm):
Blank = no discharge grommet
10 = 1 (25)
12 = 1¼ (32)
15 = 1½ (38)
20 = 2 (50)

®

external splice box

Basin height, in. (mm):
36-in. to 180-in. (914-mm to 4572-mm)

Basin diameter, in. (mm):
24 = 24 (600)
30 = 30 (750)
36 = 36 (900)

Pump basin, fiberglass

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 77

Orenco

®

| General Onsite Wastewater Products Catalog

PVC Basins

A product code diagram that describes standard options available for PVC Basins is provided below. When selecting options for the product code, please
use the ranking order provided in the diagram.

Product Code Diagram

PB

++

Splice box grommet or splice box options (choose one):
Blank = no grommet or splice box

or

S = grommet installed,1-in. (25-mm), fits SB1-SB4
L = grommet installed,1¼-in. (32-mm), fits SB5-SB6
SX = grommet installed, for Orenco® external splice box*

or

S1 = grommet and SB1 internal splice box installed
S2 = grommet and SB2 internal splice box installed
S3 = grommet and SB3 internal splice box installed
S4 = grommet and SB4 internal splice box installed
L5 = grommet and SB5 internal splice box installed
L6 = grommet and SB6 internal splice box installed

or

XS = grommet and simplex explosion-proof splice box installed
XD = grommet and duplex explosion-proof splice box installed
XT = grommet and triplex explosion-proof splice box installed

Cleanout vent option:
Blank = no cleanout
COV = cleanout vent included

Flow inducer option:
Blank = no flow inducer
FI = flow inducer included

+

Discharge grommet option, in. (mm):
Blank = no discharge grommet
10 = 1 (25)
12 = 1¼ (32)
15 = 1½ (38)
20 = 2 (50)

†

†

†

Basin height, in. (mm):
54 = 54 (1372-mm)
60 = 60 (1524-mm)
66 = 66 (1676-mm)
72 = 72 (1829-mm)

Basin diameter, in. (mm):
18 = 18 (450-mm)
24 = 24 (600-mm)
30 = 30 (750-mm)

Pump basin, PVC

* Requires minimum 18-in. (457-mm) riser height

†

For Class I Division I environments

PAGE 78

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

®

Biotube® Effl uent Filter Inserts

A product code diagram that describes standard options available for Orenco’s Biotube® effl uent fi lter inserts is provided below. When selecting options for
the product code, please use the ranking order provided in the diagram.

Product Code Diagram

04 18FT

i

Filter insert

Biotube® effluent filter

-

Outlet tee:
W = fits Type 3034 outlet tee
S = fits Schedule 40 outlet tee

18-in. (457-mm) cartridge height

4-in. (100-mm) filter diameter

Biotube® Junior Effl uent Filters

A product code diagram that describes standard options available for Orenco’s Biotube® Junior effl uent fi lters is provided below. When selecting options for
the product code, please use the ranking order provided in the diagram.

Product Code Diagram

J

04 18FT

Flow modulator and float switch bracket options:
Blank = no options selected
M = flow modulation plate installed
A = float switch bracket installed

18-in. (457-mm) cartridge height

4-in. (100-mm) filter diameter

Outlet tee:
W = fits Type 3034 outlet tee
S = fits Schedule 40 outlet tee

Filter mesh option:
Blank = 1⁄8-in. (3-mm) filter mesh
P = 1⁄16-in. (1.6-mm) filter mesh

Junior series

Biotube® effluent filter

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 79

Orenco

®

| General Onsite Wastewater Products Catalog

Biotube® FT Series Residential Effl uent Filters

A product code diagram that describes standard options available for Orenco’s Biotube® FT Series residential effl uent fi lters is provided below. When
selecting options for the product code, please use the ranking order provided in the diagram.

Product Code Diagram

04FT

4-in. (100-mm) filter diameter

Outlet tee:
W = fits Type 3034 outlet tee
S = fits Schedule 40 outlet tee

Filter mesh option:
Blank = 1⁄8-in. (3-mm) filter mesh
P = 1⁄16-in. (1.6-mm) filter mesh

®

Biotube

effluent filter

- -

Filter housing height, in. (mm):
36 = 36 (914), standard
44 = 44 (1118), standard

Flow modulator and float switch bracket options:
Blank = no options selected
M = flow modulation plate installed
A = float switch bracket installed

Cartridge height, in. (mm):
28 = 28 (711), standard
36 = 36 (914), standard

PAGE 80

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

®

Biotube® FT Series Base Inlet Effl uent Filters

A product code diagram that describes standard options available for Orenco’s Biotube® FT Series base inlet effl uent fi lters is provided below. When select­ing options for the product code, please use the ranking order provided in the diagram.

Product Code Diagram

-

FT

Biotube® effluent filter

22 14 B

Float switch bracket and overflow plate options:
Blank = no options selected
A = float switch elbow installed
FSO = overflow plate installed

Base inlet model

Cartridge height, in. (mm):
14 = 14 (356), standard

Filter housing height, in. (mm):
22 = 22 (558), standard

Filter diameter, in. (mm):
08 = 8 (200)
12 = 12 (300)

Filter mesh option:
Blank = 1⁄8-in. (3-mm) filter mesh
P = 1⁄16-in. (1.6-mm) filter mesh

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 81

Orenco

®

| General Onsite Wastewater Products Catalog

Biotube® FT Series Commercial Effl uent Filters

A product code diagram that describes standard options available for Orenco’s Biotube® FT Series commercial effl uent fi lters is provided below. When
selecting options for the product code, please use the ranking order provided in the diagram.

Product Code Diagram

-

36FT

Float switch bracket and slide rail options:
Blank = no options selected
A = float switch bracket installed
R = slide rail installed

Cartridge height, in. (mm):
36 = 36 (914), standard

Housing height*, in. (mm):
48 = 48 (1219)
54 = 54 (1372)
60 = 60 (1524)
66 = 66 (1676-mm)

Filter diameter, in. (mm):
08 = 08 (200)
12 = 12 (300)
15 = 15 (375)

†

Filter mesh option:
Blank = 1⁄8-in. (3-mm) filter mesh
P = 1⁄16-in. (1.6-mm) filter mesh

Biotube® effluent filter

* Minimum liquid level (MLL) information:

48-in. (1219-mm) housing for MLL of 37-46 in. (940-1168 mm)
54-in. (1372-mm) housing for MLL of 47-63 in. (1194-1600 mm)
60-in. (1524-mm) housing for MLL of 64-84 in. (1626-2134 mm)
66-in. (1676-mm) housing for MLL of 85-112 in. (2159-2845 mm)

†

For 12- and 15-in. (300- and 375-mm) only; use slide rail option

when only one access is available for the filter chamber

PAGE 82

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

General Onsite Wastewater Products Catalog | Orenco

Float Switch Assemblies

A product code diagram that describes standard options available for Orenco’s fl oat switch assemblies is provided below. When selecting options for the
product code, please use the ranking order provided in the diagram.

Product Code Diagram

®

MF

Number of float switches (when using multiples of the same float switch model):
Blank = no multiples of the same float switch model

Float switch assembly

--

Cord length option:
Blank = 10 ft (3 m), standard
20 = 20 ft (6 m)
30 = 30 ft (9 m)
50 = 50 ft (15 m)

Application:
FS = field set
FTL = elbow-style (base-inlet filters only)
PB = pump basin
V = pump vault (standard float settings)
STEP = Standard float settings for STEP
STEPRO = Standard float settings for STEP with redundant off
SVCOM = Standard float settings for VCOM simplex

Float stem length:
Blank = no float stem (floats and collars only)
19, 21, 27, 33, 37, 39, 45, 51, 57, 66 = stem length, in.
5, 11 = stem length, in. (for elbow-style float brackets)

Float switch models (listed in order from the top of the float stem down):
B, C, G, N, P

ACT-PRD-GOP-1, REV. 2.0

ALL ORENCO SYSTEMS

C

®

AT 800-348-9843 • FAX: [phone]

PAGE 83

Orenco

®

| General Onsite Wastewater Products Catalog

A Series Simplex Control Panels

A product code diagram and a complete list that describes standard options available for A Series Simplex Control Panels are provided below. When select­ing options for the product code, please use the ranking order provided in the diagram and in the options list.

Product Code Diagram

A

Standard options (list in order):
RO = redundant off relay
ETM = elapsed time meter
CT = event counter
HT = heater

Pump voltage:
1 = 120 VAC
2 = 240 VAC

A Series simplex control panel

Product Code Options, A Series Simplex Control Panels

Code Name Specifications (all voltages are 120 VAC unless otherwise noted)

RO Redundant off relay DIN rail mount; provides a secondary off; sounds alarm upon low level condition

ETM Elapsed time meter 7-digit, non-resettable; limit of 99,999 hours; accurate to 0.01 hours

CT Event counter 6-digit, non-resettable

HT Heater Anti-condensation heater; self-adjusting: radiates additional wattage as temperature drops

Hydrosplitters and Hydrosplitter Enclosures

Product code diagrams that describes standard options available for Orenco’s hydrosplitters and hydrosplitter enclosures are provided below. When select­ing options for the product code, please use the ranking order provided in the diagram.

Product Code Diagram

HSA

Hydrosplitter assembly

- -

Discharge connection diameter, in. (mm):
05 = ½ (15)
10 = 1 (25)

Discharge connections installed:
02 = 2 connections
03 = 3 connections
04 = 4 connections
05 = 5 connections
06 = 6 connections
07 = 7 connections
08 = 8 connections

Mainfold size, in. (mm):
100 = 1 (25)
125 = 1¼ (32)
150 = 1½ (40)
200 = 2 (50)

HSRR

Enclosure height:
12 = 12-in. (305-mm)
18 = 18-in. (457-mm)
24 = 24-in. (610-mm)

Enclosure diameter:
24 = 24-in. (600-mm) for 1-in. and 1¼-in.
(25-mm and 32-mm) manifolds, 2-6 outlets
30 = 30-in. (750-mm) for 1½-in. and 2-in.
(40-mm and 50-mm) manifolds, 7-10 outlets

Hydrosplitter enclosure

PAGE 84

F

OR A DISTRIBUTOR NEAR YOU, VISIT US ONLINE AT WWW.ORENCO.COM

ACT-PRD-GOP-1, R

EV. 2.0

Orenco Systems®, Inc. Terms and Conditions

1. Agreement; Acceptance

This document contains all of the terms and conditions with
respect to the sale and purchase of the merchandise ordered
by Purchaser and sold by Orenco Systems,
unless a separate written agreement executed by duly author­ized representatives of Purchaser and Orenco explicitly
supersedes these Terms and Conditions.

Acceptance of this offer by Purchaser is expressly limited to
the exact terms contained herein, and any attempt by Pur­chaser to alter or omit any such terms shall be deemed a
rejection and a counteroffer. Purchaser’s acknowledgment,
acceptance, or purchase order form that stipulates different
conditions shall not effect a modification of these Terms and
Conditions. Unless Purchaser notifies Orenco in writing to
the contrary prior to its receipt of the merchandise, or a
separate written agreement explicitly supersedes these Terms
and Conditions, Purchaser’s acceptance of the merchandise
shall conclusively evidence Purchaser’s acceptance of these
Terms and Conditions.

2. Custom Products

Merchandise not listed in Orenco’s catalogs or standard price
lists, or that must be custom built to the specifications of
Purchaser, shall be considered “Custom Products” within this
document. Custom Products do not include standard mer­chandise that requires minor modifications, such as being cut
to a specified length. If Purchaser orders a Custom Product,
and Orenco is agreeable to manufacturing and/or selling it,
Purchaser agrees to defend Orenco at its cost and expense,
and shall indemnify and hold Orenco harmless from and
against any United States or foreign patent infringement suit
related to the Custom Product brought upon Orenco by third
parties. In addition, Purchaser assumes all responsibility for
the compatibility of the Custom Product for its intended use,
and for the adequacy of the engineering, design or specifica­tions furnished by Purchaser to Orenco.

Prior to releasing an order for a Custom Product for manu­facturing, Orenco shall submit its drawings, schematics,
and/or other documentation of the critical elements of the
Custom Product to the designer for review, to ensure that it
will be manufactured to meet the designer’s functional re­quirements and/or specifications. Orenco will only manufac­ture the Custom Product once it has received confirmation
that the designer has reviewed and approved any such sub­mittal documents.

3. Delivery

Orenco agrees to deliver all merchandise ordered by Pur­chaser for shipping within 30 days of the date Orenco re­ceives and accepts a written purchase order, unless Orenco
notifies Purchaser prior to the expiration of the 30-day period
of any reasonable, foreseeable delays.

Merchandise shall be delivered when it is staged for shipping
from Orenco’s facilities (FOB Origin [Shipping]), and Pur­chaser shall assume the risk of loss for the merchandise at
that time.

In the event Purchaser requests expedited delivery of mer­chandise, and Orenco is agreeable to the request, Purchaser
shall be charged an Expedite Fee equal to the greater of
$50.00 or 10% of the merchandise price.

4. Shipping

Purchaser is responsible for shipping its merchandise from
Orenco’s facilities. Purchaser may transport the merchandise
itself, arrange for transportation of the merchandise with
carriers of its choosing, or have Orenco arrange transporta­tion of the merchandise on its behalf. If Purchaser fails to
clearly identify which party it chooses to make the arrange­ments on a purchase order, Orenco will arrange the transpor­tation of the merchandise associated with the order on Pur­chaser’s behalf.

Purchaser shall be responsible for all costs associated with
transporting the merchandise from Orenco’s facilities, in­cluding all freight and insurance costs, as follows:

(a) Will-Call; Collect. If Purchaser transports the mer-

chandise itself or arranges transportation of the mer­chandise with a third-party carrier, Purchaser shall pay
Orenco a commercially-reasonable fee for each pallet,
crate, container, or other packaging provided by Orenco.
In addition, if Purchaser arranges transportation with a
third-party carrier, Purchaser will arrange to pay for the
service directly.

ACT-PRD-GOP-1, REV. 2.0

General Onsite Wastewater Products Catalog | Orenco

®

Inc. (“Orenco”),

(b) Prepaid and Add. If Purchaser elects to have Orenco

arrange transportation of the merchandise on its behalf,
Orenco shall pay for the service directly. Purchaser shall
pay Orenco for both Shipping and Handling, as itemized
on a quotation or invoice, as follows: (i) “Shipping”
shall consist of reimbursement of all freight and insur­ance costs paid by Orenco, including all accessorial
charges from the carrier for items such as residential or
construction site deliveries or use of lift gates, as well as
any other fees, duties, tariffs, or taxes that may be ap­plied on the merchandise by third parties after they are
delivered, including storage fees and import, export, and
transportation fees, duties, tariffs, and taxes. (ii) “Han­dling” shall consist of a fee equal to 5% of the Shipping
costs paid by Orenco as identified above, and a com­mercially-reasonable fee for each pallet, crate, contain­er, or other packaging provided by Orenco.

Large or special merchandise may require cranes or special
equipment for unloading after transport. In instances where
Orenco arranges for the transportation of this type of mer­chandise on Purchaser’s behalf, Orenco shall immediately
notify Purchaser of any delay in the scheduled delivery of the
merchandise for shipping, or of any information it receives
from a carrier indicating a delay in the scheduled arrival of
the transport, and Purchaser agrees to ensure that the equip­ment necessary to unload the merchandise is present at the
carrier’s destination, and shall reimburse and indemnify
Orenco against any back charges or other fees charged by the
carrier for delivery delays caused by failing to have the
necessary equipment present at the agreed-upon destination
and delivery time.

5. Taxes

Purchaser shall be responsible for the payment of all federal,
state, provincial, county, local, or government taxes, includ­ing but not limited to, sales tax, use tax, value-added tax,
goods and services tax, or other excise tax that may be ap­plied on the merchandise (“Taxes”), and shall indemnify and
hold Orenco harmless from those Taxes. Orenco shall be
responsible for any tax based solely upon its net income.
Purchaser may supply Orenco with a valid Resale Certificate
or other form certifying an exemption from the payment of
Taxes from the taxing authority having proper jurisdiction
over the order.

6. Payment Terms

Purchaser shall promptly pay Orenco for merchandise, and
any Taxes, Shipping, Handling, or other costs associated
with the merchandise, in accordance with the terms below:

(a) Prepayment. Purchaser may pay Orenco prior to deliv-

ery for merchandise, Taxes, estimated Shipping and
Handling, and other costs associated with the purchase
order. However, Purchaser must pay Orenco prior to de­livery in the following circumstances: (i) If Purchaser
does not have a credit account with Orenco, Purchaser
must pay 100% of the full price of the merchandise, plus
estimated Shipping and Handling, and other associated
costs, before Orenco will accept a purchase order and
release it for manufacturing. (ii) If Purchaser does not
have available credit remaining on its credit account
with Orenco, it must pay all amounts in excess of its
available credit, up to 100% of the full price of the mer­chandise, Taxes, estimated Shipping and Handling, and
other associated costs, before Orenco will accept a pur­chase order and release it for manufacturing.

(b) On Account. If Purchaser has a credit account with

Orenco, has available credit on its account, and has not
prepaid, Orenco shall invoice Purchaser for amounts
owed for delivered merchandise, Taxes, Shipping, Han­dling, and other associated costs. Purchaser shall pay
each invoice in full within 30 days from the date of the
invoice (“Net 30”). Past due invoices shall bear a fi­nance charge of 1.5% per month. Daily accrual of the
finance charge shall begin on the 31
of the invoice. If Orenco employs a collection agency to
collect any amount not paid by Purchaser under these
terms, Purchaser shall pay all of Orenco’s reasonable
collection expenses. If any suit, action, or proceeding is
instituted by Orenco to collect any amount not paid by
Purchaser in accordance with these terms, Purchaser
shall pay all of Orenco’s investigation and litigation
costs, including reasonable attorneys’ fees, whether in­curred before, during, or after trial or appeal.

ALL ORENCO SYSTEMS

C

7. Limited Warranty

Subject to the exclusions, limitations, and conditions con­tained herein, Orenco warrants that all merchandise will be
free from defects in materials and workmanship for a period
of 1 year after delivery of such merchandise to Purchaser,
except as may be otherwise provided in a separate written
warranty instrument between Orenco and Purchaser or from
another manufacturer. If a separate written warranty instru­ment exists, the terms and conditions of said instrument
control.

Exclusive Remedy. The exclusive remedy for any claim
under this Limited Warranty shall be the obligation of Oren­co to repair or replace, at its discretion, any defective mer­chandise. Labor is not covered under this Limited Warranty.

In the event Orenco determines that returned merchandise is
defective in materials or workmanship and covered by this
Limited Warranty, Orenco will credit or reimburse Purchaser
for all reasonable transportation charges incurred in returning
the merchandise, and will be responsible for all transporta­tion charges to return repaired or replacement merchandise to
Purchaser. Such repaired or replacement merchandise shall
continue to be warranted under the Limited Warranty of the
original purchase. In the event Orenco determines that re­turned merchandise is not defective in materials or workman­ship, or is not covered by this Limited Warranty, Orenco
shall charge Purchaser a testing fee and all reasonable trans­portation charges required to return the merchandise to the
Purchaser.

O

RENCO SHALL NOT BE LIABLE FOR ANY LOSS, INJURY, OR

DAMAGES TO PERSONS OR PROPERTY RESULTING FROM

FAILURE OF

SHALL
QUENTIAL, SPECIAL, OR INDIRECT DAMAGES OF ANY KIND.

IN NO EVENT SHALL THE LIABILITY OF ORENCO UNDER THIS
LIMITED WARRANTY EXCEED THE TOTAL INVOICED PRICE

OF THE MERCHANDISE

Disclaimer.

RANTY, ALL EXPRESS OR IMPLIED CONDITIONS, REPRESEN-

TATIONS
TION, ANY IMPLIED WARRANTY OR CONDITION OF MER-

CHANTABILITY
SATISFACTORY QUALITY, ACCURACY OF INFORMATIONAL

CONTENT
LAW, USAGE, OR TRADE PRACTICE, MAY ONLY BE CLAIMED

DURING THE WARRANTY PERIOD

HEREBY EXPRESSLY DISCLAIMED AND EXCLUDED TO THE

EXTENT ALLOWED BY LAW

, OR ANY DEFECT IN, THE MERCHANDISE. NOR

ORENCO BE LIABLE FOR ANY INCIDENTAL, CONSE-

EXCEPT AS SPECIFIED IN THIS LIMITED WAR-

, AND WARRANTIES INCLUDING, WITHOUT LIMITA-

, FITNESS FOR A PARTICULAR PURPOSE,

, OR THOSE ARISING FROM A COURSE OF DEALINGS,

8. Return of Merchandise

Purchaser may not return merchandise without the prior
approval of Orenco. Merchandise must be securely packed to
reach Orenco without damage. Merchandise accepted for
return is subject to a restocking fee and all transportation
charges. Orenco, in good faith, will determine the restocking
fee and the amount that will be credited or refunded to Pur­chaser for the returned merchandise.

9. Waiver

The failure of either Party on any occasion to exercise a right
granted hereunder shall not operate as a waiver of such right
as to subsequent occasions, and shall not effect a modifica­tion of these Terms and Conditions.

10. Governing Law

The laws of the state of Oregon shall govern these Terms and
Conditions, together with all rights, obligations, and disputes
arising out of or related thereto. The Parties hereby expressly
disclaim any and all rights, obligations, or procedural or
jurisdictional requirements granted or imposed by the United
Nations Convention on Contracts for the International Sale of
Goods (“CISG”). Any dispute or legal action arising out of
or relating to these Terms and Conditions shall be brought in

st

day from the date

®

AT 800-348-9843 • FAX: [phone]

and decided by State Courts of Oregon. In any such dispute
or action, Purchaser consents to the jurisdiction and venue of
the Circuit Court of the State of Oregon for Douglas County.

®

.

, AND THEREAFTER ARE

.

CLD-TC-1

PAGE 85

Rev. 2.4, © 04/24/14

Orenco Systems

®

, Inc.

Orenco® Wastewater Systems

Limited Warranty for

General Onsite Wastewater Products

LIMITED WARRANTY

Commitment to Quality

Since 1981, Orenco Systems®, Incorporated (“Oren­co”), has been a company that researches, designs,
manufactures, and sells high-quality products. We
see ourselves as more than a “business.” We see
ourselves as a company that makes the planet a
cleaner, healthier place, a company that is Changing

the Way the World Does Wastewater.

®

Any wastewater system can be affected by im­proper design, installation, lack of maintenance, or
system abuse. Although our products are carefully
designed and constructed, it’s still important to pay
strict attention to system design and installation
instructions and to follow through with intelligent
usage and regular maintenance.

Limited Warranty Coverage

Subject to the exclusions, limitations, and condi­tions contained herein, Orenco warrants that all of
its products designed for use in wastewater appli­cations, which are not components in an Orenco col­lection or treatment system covered by a separate
written warranty or individual products covered by a
separate written warranty, will be free from defects
in materials and workmanship for a period of time
corresponding to the type of product (the “Warranty
Period”), as follows:

(a) If the product is a Biotube

in a single-family residential wastewater sys­tem: for the life of the wastewater system.

(b) If the product is a 500-, 1,000-, 1,500-, or 2,000-

gallon (1900-, 3785-, 5678-, or 7570-L) Orenco
fiberglass reinforced polyester (“FRP”) tank:
for five years after the tank has been delivered
to the end-user.

(c) If the product is an Orenco PVA-series, mul-

tiple-stage, high-head, submersible turbine
effluent pump: for 18 months from the date of
manufacture on the liquid end of said pump.

(d) If the product is an Orenco PF-series, multiple-

stage, high-head, submersible turbine effluent
pump: for five years from the date of manufac­ture on the liquid end of said pump.

(e) For all other products not specifically listed

above: for one year after the product has
been delivered to the end-user, except as may
be otherwise provided in a separate written
warranty instrument between Orenco and

®

Effluent Filter used

the end-user or from another manufacturer.
If a separate warranty instrument exists, the
terms and conditions of said instrument con­trol.

Obtaining Warranty Service

To make a claim under this Limited Warranty, con­tact your Orenco Dealer, Supplier, or Distributor
(“Orenco’s Representative”), who will process your
claim. If for some reason Orenco’s Representative is
unavailable, or if you purchased the product directly
from Orenco, contact Orenco by phone (800-348­9843 or [phone]) to make your claim.

Any warranty claim must be received no later than
the expiration of the Warranty Period listed above.

If requested by Orenco, potentially defective prod­ucts must be returned to Orenco’s Sutherlin, Oregon
facility through Orenco’s Representative, if appli­cable, transportation prepaid.

Exclusive Remedy

The exclusive remedy for any claim under this Lim­ited Warranty shall be the obligation of Orenco to
repair or replace, at its discretion, any defective
products. Labor is not covered under this Limited
Warranty. Defects in materials or workmanship
will be determined in good faith by Orenco upon re­ceipt and inspection of a returned product. Products
shall not be deemed to be defective if the failure,
malfunction, or damage was caused by, or resulted
from:

(a) the product not being installed, operated, or

maintained in accordance with any applicable
instructions provided;

(b) abuse, misuse, accident, or negligence;

(c) a lightning strike or other catastrophic event

beyond the control of Orenco; or

(d) modification of the product.

In the event Orenco determines that a returned
product is defective in materials or workmanship
and covered by this Limited Warranty, Orenco will
credit or reimburse you for all reasonable transpor­tation charges incurred in returning the product, and
will be responsible for all reasonable transporta­tion charges to return the repaired or replacement
product to you. Such repaired or replacement prod­uct shall continue to be warranted under the Lim­ited Warranty of the original purchase. In the event
Orenco determines that a returned product is not
defective in materials or workmanship, or is not cov­ered by this Limited Warranty, Orenco may charge
you a testing fee and all reasonable transportation
charges required to return the product to you.

ORENCO SHALL NOT BE LIABLE FOR ANY LOSS, INJURY,

OR DAMAGES TO PERSONS OR PROPERTY RESULTING FROM
FAILURE OF, OR ANY DEFECT IN, THE PRODUCT, OR FOR ANY
TECHNICAL ASSISTANCE OR INFORMATION THAT ORENCO
MAY HAVE PROVIDED TO YOU. NOR SHALL ORENCO BE
LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL,
OR INDIRECT DAMAGES OF ANY KIND, INCLUDING, BUT
NOT LIMITED TO, LOSS OF PROFITS, PLANT DOWNTIME,
FINES OR PENALTIES, OR LAWSUITS BY THIRD PARTIES. IN
NO EVENT SHALL THE LIABILITY OF ORENCO UNDER THIS

L

IMITED WARRANTY EXCEED THE TOTAL INVOICED PRICE,
EXCLUDING INSTALLATION AND/OR STARTUP COSTS, OF
THE PRODUCT.

Disclaimer

EXCEPT AS SPECIFIED IN THIS LIMITED WARRANTY, ALL

EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS,
AND WARRANTIES INCLUDING, WITHOUT LIMITATION,
ANY IMPLIED WARRANTY OR CONDITION OF MERCHANT-
ABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFAC-
TORY QUALITY, ACCURACY OF INFORMATIONAL CONTENT,
OR THOSE ARISING FROM A COURSE OF DEALINGS, LAW,
USAGE, OR TRADE PRACTICE, ARE HEREBY EXCLUDED TO
THE EXTENT ALLOWED BY APPLICABLE LAW, AND ARE EX-
PRESSLY DISCLAIMED BY ORENCO.

s Changing the Way the World Does Wastewater

®

CLD-WTY-GOP-1

Rev. 1.0, © 05/13

Orenco Systems

®

, Inc.

Orenco® Controls

Limited Warranty for

Electrical Control Panels

LIMITED WARRANTY

Commitment to Quality

For over 30 years, Orenco® Controls (a division of
Orenco Systems
known as a company that designs, manufactures,
and sells high-quality standard and custom electrical
control panels. We provide custom solutions for every
application – from simple alarm panels with a single
custom component to highly sophisticated panels
that are totally customized with programmable logic,
variable frequency drives, reduce voltage starters, or
remote telemetry. Our assembly facility is equipped
to build virtually any electrical control panel to your
specifications, whether you need one unit or thou­sands.

®

, Incorporated – “Orenco”) has been

Limited Warranty Coverage

Subject to the exclusions, limitations, and conditions
contained herein, Orenco warrants that all of its stan­dard and custom electrical control panels, which are
not covered by a separate written warranty, will be
free from defects in materials and workmanship for a
period of three years after the panel has been deliv­ered to the end-user (the “Warranty Period”), except
as follows:

(a) The Warranty Period for Variable Frequency

Drive (VFD) components in an electrical control
panel shall be one year from the date of the
component’s manufacture.

(b) The Warranty Period for Reduced Voltage Soft

Start (RVSS) components in an electrical con­trol panel shall be one year from the date of the
component’s manufacture.

Exclusions

The following components in an electrical control
panel are not covered by this Limited Warranty,
though any warranties offered by the components’
manufacturer may still apply:

(a) Customer-supplied components, or

(b) Customer-specified components that are not

approved by Orenco.

Obtaining Warranty Service

To make a claim under this Limited Warranty contact
your Orenco Dealer, Supplier, or Distributor (“Oren­co’s Representative”), who will process your claim.
Please provide them with the control panel’s unique

®

UL

Number, typically located on the inside of the en-

closure door, to aid in processing the claim.

If for some reason Orenco’s Representative is un­available, or if you purchased the product directly

from Orenco, contact Orenco by phone [phone]
or [phone]) or by e-mail (electricalreturns@
orenco.com) to make your claim.

Warranty claims must be made no later than the expi­ration of the Warranty Period listed above.

If requested by Orenco, potentially defective products
must be returned to Orenco’s Sutherlin, Oregon fa­cility through Orenco’s Representative, if applicable,
transportation prepaid.

Exclusive Remedy

The exclusive remedy for any claim under this Limited
Warranty shall be the obligation of Orenco to repair
or replace, at its discretion, any defective products.
Labor is not covered under this Limited Warranty. De­fects in materials or workmanship will be determined
in good faith by Orenco upon receipt and inspection
of a returned product. Products shall not be deemed
to be defective if the failure, malfunction, or damage
was caused by, or resulted from:

(a) the product not being installed, operated, or

maintained in accordance with any applicable
instructions provided;

(b) abuse, misuse, accident, or negligence;

(c) a lightning strike or other catastrophic event

beyond the control of Orenco; or

(d) modification of the product.

In the event Orenco determines that a returned prod­uct is defective in materials or workmanship and is
covered by this Limited Warranty, Orenco will credit
or reimburse you for all reasonable transportation
charges incurred in returning the product, and will be
responsible for all transportation charges to return
the repaired or replacement product to you. Such re­paired or replacement product shall continue to be
warranted under the Limited Warranty of the origi­nal purchase. In the event Orenco determines that
a returned product is not defective in materials or
workmanship, or is not covered by this Limited War­ranty, Orenco may charge you a testing fee and all
reasonable transportation charges required to return
the product to you.

ORENCO SHALL NOT BE LIABLE FOR ANY LOSS, INJURY,

OR DAMAGES TO PERSONS OR PROPERTY RESULTING FROM
FAILURE OF, OR ANY DEFECT IN, THE PRODUCT, OR FOR ANY
TECHNICAL ASSISTANCE OR INFORMATION THAT ORENCO
MAY HAVE PROVIDED TO YOU. NOR SHALL ORENCO BE
LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL,
OR INDIRECT DAMAGES OF ANY KIND, INCLUDING, BUT
NOT LIMITED TO, LOSS OF PROFITS, PLANT DOWNTIME,
FINES OR PENALTIES, OR LAWSUITS BY THIRD PARTIES. IN
NO EVENT SHALL THE LIABILITY OF ORENCO UNDER THIS

IMITED WARRANTY EXCEED THE TOTAL INVOICED PRICE,

L

EXCLUDING INSTALLATION AND/OR STARTUP COSTS, OF THE
PRODUCT.

Disclaimer

EXCEPT AS SPECIFIED IN THIS LIMITED WARRANTY, ALL

EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS,
AND WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY
IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUAL-
ITY, ACCURACY OF INFORMATIONAL CONTENT, OR THOSE
ARISING FROM A COURSE OF DEALINGS, LAW, USAGE, OR
TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE EXTENT
ALLOWED BY APPLICABLE LAW, AND ARE EXPRESSLY DIS-
CLAIMED BY ORENCO.

Orenco® Controls

s We Speak the Language of Controls

™

CLD-WTY-CP-1

Rev. 1.0, © 05/13

Orenco Systems

®

, Inc.

Orenco

®

| General Onsite Wastewater Products

Product Catalog

®

Orenco

Orenco Systems®, Incorporated

814 Airway Ave., Sutherlin, OR 97479 USA
800-348-9843 • 541-459-4449

www.orenco.com/product_catalogs

ACT-PRD-GOP-1, Rev. 2.0, 03/16
© 2016, Orenco Systems

®

, Inc.