How it Works
Oregon
Loading...
PE988
User Manual
1 pgs3.35 Mb0

Oregon PE988 User Manual

Walk Around the World
Pedometer
MODEL: PE988
USER MANUAL
INTRODUCTION
Thank you for selecting the Oregon Scientic™ Walk Around the World Pedometer (PE988).
The PE988 is more than just a traditional pedometer. On top of the traditional features such as step count, distance count and calorie count, this product is designed with the purpose of blending fun, challenges and rewards into the sport of walking.
IMPORTANT
Do not immerse the pedometer in water.
CONTROL BUTTONS
1
2
3
1. SET: To conrm and move to next setting option
2.
DISP: To select options; to increase values
3.
MODE: To select modes; to decrease values
LCD
1. : Indicates battery power is low
2.
: Indicates achieved summary of the trip is displayed
3.
: Indicates targets to achieve of the selected trip is
displayed (trip diary)
4.
: Indicates key tone is On
5.
: Indicates target summary of the selected trip plan is
displayed
6.
: Indicates the button(s) that can be
pressed
7.
: Indicates alarm is ON
8.
: Indicates on which day (1-7) before is the
displayed data recorded
GETTING STARTED
ACTIVATE PEDOMETER (FIRST-TIME USE ONLY)
Remove the battery-saving strip by pulling it out from the battery compartment. The unit will automatically prompt you to set your stride length. Refer to Set Up Mode to set your stride length and other settings.
NOTE The unit will go to Sleep Mode like the screen below
then the display will turn off if no movement is detected for 3 minutes; once there is movement detected, the display will turn on.
NOTE To effectively use the pedometer for calculating calorie consumption (based on step count and user body weight) and distance walked (based on step count and length of user ’s stride), you are advised to set the time and your user data in the Set Up Mode.
CARRYING THE PEDOMETER
BATTERY REPLACEMENT
The pedometer uses a CR2032 3V battery, which has already been installed.
Indicates battery power is low.
To replace battery:
1. Use a small Philips screwdriver to remove battery compartment lid.
2. Remove the old battery and insert the new one, matching the polarities.
3. Replace the lid by screwing it back into place using a small Philips screwdriver.
IMPORTANT
When the battery compartment is opened or
battery is replaced, all data in the pedometer will be reset.
OPERATION MODES
The PE988 has 5 modes of operation. Press MODE to toggle among the 5 modes.
NOTE After a mode is selected, either wait until the moving
DAILY MODE
In the Daily Mode, you can view:
• the time and current step count (default display)
• the current step count, current distance walked, exercise time and calorie consumption (by reverse display of the unit)
• the achieved summary of the selected trip plan (if a trip plan is selected)
NOTE The step count, exercise time, distance walked and
calorie consumption values will reset automatically to zero every night at 00:00.
To view the current step count, current distance walked, exercise time and calorie consumption:
Reverse the unit 180° upside down.
To resume default display, reverse the unit to its original position.
EN
Current time and step count
Current distance walked and
step count
Current exercise time and
calorie consumption
Press SET during the default display.
The cities achieved will be displayed and after 3 seconds, the unit will auto-toggle to show the accumulated rewards, days, distance and steps achieved. The achievement bar shows how far you have achieved before the target. After 3 seconds, it will auto-toggle to the default display.
Cities achieved
Rewards achieved (refer to table below)
Days achieved and trip plan
Distance and steps achieved
Achievement bar
The table below lists the rewards that you will receive if target cities are achieved.
Borsch soup
Sushi
Noodle
Tea
Hotdog
Beijing duck
Croissant
Pizza
Jamon
Chocolate
Kebab
Feijoada
Lobster
Fish
Steam bun
Pretzel
Herring
Waffle
Reward to receiveCity achieved
Moscow
Tokyo
Hong Kong
London
New York
Beijing
Paris
Rome
Barcelona
Zurich
Dubai
Sao Paulo
Sydney
Cape Town
Shanghai
Berlin
Stockholm
Brussels
WALK MEMORY MODE
In the Walk Memory Mode, you can view the records of your distance walked, number of steps, exercise time and calorie consumption for the past 7 days.
1. Press
MODE to toggle to Walk Memory Mode. The unit will auto-toggle between the distance walked and number of steps, and the exercise time and calorie consumption. Press SET to fast toggle.
Distance and steps walked
Exercise time and
calorie consumption
2. Press DISP or MODE to select which day to view: DISP to go to the next day, MODE to go to the previous day.
3. To exit and return to the default display, either keep on pressing DISP to toggle through all 7-day records or refrain from pressing any button for at least 3 seconds.
To reset records:
TRIP PLAN MODE
In the Trip Plan Mode, you can select an exercise (trip) plan and achieve its target.
If a trip plan is already selected, this Mode will be hidden automatically. You have to complete the selected trip plan before you can select a new one.
1. Press
MODE to toggle to Trip Plan Mode.
2. The unit will prompt you to select your exercise (trip) plan. You have 6 trip plans to select from (refer to the table below). Press DISP to select and SET to conrm.
After a trip plan is selected, the unit will auto-toggle and show the screens below. It will nally auto-toggle to the default display; you can then start walking.
Starting city and final destination (e.g. if trip plan 2 is selected, the starting city is Rome and the final destination is London)
Target distance and time
3. Start walking continuously for 16 steps or more in order for the pedometer to start counting steps. Do this every time you start walking.
The table below lists the 6 trip plans.
TRIP 1
From
To
Target distance
(OS-KM)
Target time to
achieve (days)
Berlin Brussels 6.52 1.30329
Brussels London 3.20 0.640382
London Paris 3.38 0.67578
Total 13.10 Total 2.619452
TRIP 2
From To
Target distance
(OS-KM)
Target time to
achieve (days)
Rome Zurich 6.92 1.38374
Zurich Stockholm 14.74 2.947688
Stockholm Moscow 12.36 2.471424
Moscow London 24.94 4.9879
Total 58.95 Total 11.790752
TRIP 3
From To
Target distance
(OS-KM)
Target time to
achieve (days)
Tokyo Hong Kong 28.96 5.7924
Hong Kong Shanghai 12.53 2.506822
Shanghai Beijing 10.62 2.12388
Beijing Dubai 58.47 11.694212
Total 110.59 Total 22.117314
TRIP 4
From To
Target distance
(OS-KM)
Target time to
achieve (days)
Barcelona Sao Paulo 87.64 17.528446
Sao Paulo Cape town 63.56 12.7111
Cape town Brussels 94.90 18.979764
Brussels Rome 11.83 2.36523
Total 257.92 Total 51.58454
TRIP 5
From To
Target distance
(OS-KM)
Target time to
achieve (days)
New York Shanghai 118.42 23.68448
Shanghai Stockholm 77.80 15.55903
Stockholm Hong Kong 82.36 16.472942
Hong Kong Dubai 59.16 11.832586
Dubai Brussels 51.57 10.31369
Brussels Sao Paulo 96.36 19.272602
Total 485.68 Total 97.13533
TRIP 6
From To
Target distance
(OS-KM)
Target time to
achieve (days)
Barcelona Stockholm 22.94 4.588868
Stockholm London 14.35 2.870456
London Sydney 169.94 33.988516
Sydney Tokyo 77.96 15.59121
Tokyo Berlin 89.12 17.824502
Berlin London 9.30 1.860004
London Beijing 81.25 16.2509
Beijing Sao Paulo 175.94 35.18883
Total 640.82 Total 128.163286
NOTE:
• 1 km = 1/100 OS-KM
• Walking faster and with longer strides can achieve the target within lesser days.
TRIP DIARY MODE
In the Trip Diary Mode, you can view your trip plan's detailed target summary. If no trip plan is selected, this Mode will be hidden automatically.
Press MODE to toggle to Trip Diary Mode. The unit will auto­toggle every 3 seconds, showing the following:
• All starting and destination cities
• The selected trip plan, total days to achieve and total destination count
• The total distance and days to achieve
SET UP MODE
In the Set Up Mode, you can set your stride length, weight, time, alarm and key tone.
1. Press
MODE to toggle to Set Up Mode.
2. Wait for the setting option to ash, then press
DISP or
MODE to select option.
3. Press SET
to conrm and move to the next setting
option.
The setting sequence is:
• stride length unit (cm / in) [press
DISP]
• stride length value [press
DISP or MODE]
• weight unit (kg / lb) [press
DISP]
• weight value [press
DISP or MODE]
• time format (12 / 24) [press
DISP]
• time (hour and minute) [press
DISP or MODE]
• alarm On/Off [press
DISP]
• alarm time (hour and minute) (if alarm On is selected) [press DISP or MODE]
• key tone On/Off [press
DISP]
To silence an activated alarm:
Press any button to silence an activated alarm. If not deactivated, the alarm will be activated at the same time the following day.
ANIMATION
The table below lists the scenarios that are associated with the animations featured in this pedometer.
ANIMATIONSCENARIO
If you successfully complete the trip within target
If you fail to complete the trip within target
If there is no activity for 24 hours
Back to default display
Press SET if you want to select your next trip then follow steps 2 and 3 in Trip Plan Mode, or press MODE to exit.
Press SET if you want to select a new trip then follow steps 2 and 3 in Trip Plan Mode, or press MODE to exit.
SPECIFICATIONS
Real time clock
12 / 24 format with hour / minute
Step measurement range 0 – 99,999 steps
Distance measurement range
0 – 9999.99 km (0 – 621 miles)
User adjustable stride length
28 – 152 cm (11 – 60 inches)
Calorie measurement range 0 – 99,999 kcal
Body weight range
29 – 154 kg (64 – 340 lbs)
Exercise timer range 99 hr 59 min 59 sec
Water resistance No
Power 1 x CR2032 3V battery
Operating temperature
-10°C to 40°C (14°F to 104°F)
Storage temperature
-20°C to 60°C (-4°F to 140°F)
PRECAUTIONS
To ensure you use your product correctly and safely, read these warnings and the entire user manual before using the product:
• Use a soft, slightly moistened cloth. Do not use abrasive or corrosive cleaning agents, as these may cause damage. Use lukewarm water and mild soap to clean the device thoroughly after each training session. Never use the product in hot water or store it when wet.
• Do not subject the product to excessive force, shock, dust, temperature changes, or humidity. Never expose the product to direct sunlight for extended periods. Such treatment may result in malfunction.
• Do not tamper with the internal components. Doing so will terminate the product warranty and may cause damage. The main unit contains no user-serviceable parts.
• Do not scratch hard objects against the LCD display as this may cause damage.
• Take precautions when handling all battery types.
• Remove the batteries whenever you are planning to store the product for a long period of time.
• When replacing batteries, use new batteries as specied in this user manual.
• The product is a precision instrument. Never attempt to take this device apart. Contact the retailer or our customer service department if the product requires servicing.
• Do not touch the exposed electronic circuitry, as there is a danger of electric shock.
• Check all major functions if the device has not been used for a long time. Maintain regular internal testing and cleaning of your device. Have your device serviced by an approved service centre annually.
• When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste.
• Due to printing limitations, the displays shown in this manual may differ from the actual display.
• The contents of this manual may not be reproduced without the permission of the manufacturer.
NOTE The technical specications for this product and the
NOTE Features and accessories will not be available in all
countries. For more information, please contact your local retailer.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientic.com) to learn more about Oregon Scientic products.
If you're in the US and would like to contact our Customer Care department directly, please visit:
www2.oregonscientic.com/service/support.asp
For international inquiries, please visit: www2.oregonscientic.com/about/international.asp.
EU-DECLARATION OF CONFORMITY
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use