Pedometer with PC Download
Model: PE830
User Manual
2006.8.16, 5:40 PM1
Pedometer with PC Download
Model: PE830
USER MANUAL
CONTENTS
Introduction ............................................................... 1
Overview .................................................................... 2
Front View ................................................................ 2
Back View ................................................................ 2
LCD .......................................................................... 3
Getting Started .......................................................... 3
Set Up ...................................................................... 3
Important for Accuracy ............................................. 3
Useful Tips ............................................................... 4
Clock / User Profile ................................................... 4
To Set the User Profile for 1
a Battery Change ..................................................... 4
Change Individual Clock or User Profile Settings .... 5
Switching Between Operation Modes ..................... 5
Daily ........................................................................... 5
Target ......................................................................... 6
Timer .......................................................................... 6
Memory ...................................................................... 7
View Total Weekly Records ..................................... 7
View Daily Records .................................................. 7
Clear All Records ..................................................... 8
st
Time Use or After
Alarm .......................................................................... 8
Exercise Schedule Reminder .................................. 8
Connecting to your PC ............................................. 9
Backlight / Keypad Lock / Reset ............................. 9
Batteries .................................................................. 10
Precautions ............................................................. 10
Specifications .......................................................... 11
About Oregon Scientific .......................................... 11
EU-Declaration of Conformity ............................... 12
INTRODUCTION
Thank you for selecting this Oregon Scientific
pedometer. This unique product is ideal for monitoring
your exercise routine. The pedometer counts the number
of steps taken from one location to another, calculating
the total distance covered and calories expended. This
information can be downloaded onto your PC using
SmartSync software.
Please keep this manual handy as you use your new
product. It contains practical step-by-step instructions, as
well as technical specifications and warnings you should
know.
IMPORTANT The measurement functions built into the
PE830 are not meant to substitute professional
measurement or industrial precision devices. Values
produced by this unit should be considered as reasonable
representations only.
1
EN
TM
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM1
EN
OVERVIEW
FRONT VIEW
1. MODE/SET button
2. USB connection port
3. Base USB connector
4.
/ button
5. RESET /
/ / button
BACK VIEW
3
1
4
2
1. Belt clip
2. USB connection port
3. / button
4. Battery door
2
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM2
LCD
5
1
23
689
7
1. Shows when in Target Mode
2. Shows when in Timer Mode and flashes when you
are in another display and timer is running
3. Shows when keypad lock is enabled
4. Shows when alarm is activated
5. Shows when in Timer Mode
6. Shows value of step, distance and calorie, clock /
alarm time, timer and user profile
7. Shows when in 7-day Memory Mode
8. Colored bar shows the memory weekday and target
status
9. Dot matrix shows various icons to indicate the mode
/ display you are in
4
GETTING STARTED
SET UP
You must set up the device (as shown below) when you
first activate the unit, reset it or change the batteries, or
your pedometer will not work properly.
1. To activate the device, pull out the insulation tape
underneath the battery cover.
2. Set the clock and user profile (see Clock / User Profile
section).
3. Attach the pedometer to your belt or training attire at
waist level. Secure it at horizontal position. Improper
positioning may result in incorrect data collection.
IMPORTANT FOR ACCURACY
The following conditions may cause incorrect reading
of steps taken:
1. Uneven walking pace, such as walking in crowded
areas or on uneven floor.
3
EN
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM3
EN
2. Frequent up and down movements, such as standing
up and/or sitting down; running, jumping, or
ascending/descending stairs or steep slopes.
USEFUL TIPS
When changing settings you can:
• Press and hold
options.
• Press SET to bypass or confirm a setting and move
on to the next one.
During setting mode, if a key is not pressed within
30 seconds, there will be a beep sound and the screen
will return to the previous mode.
/ to speed through the setting
CLOCK / USER PROFILE
TO SET THE USER PROFILE FOR 1ST TIME
USE OR AFTER A BATTERY CHANGE
When the installation tape is removed to activate the
pedometer and whenever the batteries are changed, the
pedometer will ask you to set the clock and user profile.
Please complete the settings as shown below or your
pedometer will not work properly.
1. The first setting will
flash.
2. Press
3. The setting sequence is:
CLOCK
• 12/24hr format
• Hour
• Minute
• Day of the week
USER PROFILE
•Weight unit
•Weight
• Stride unit
• Stride
• Age
• Gender
To calculate stride length:
Individual stride length varies. Input an appropriate length
for an average stride. To determine the average stride
4
/ to change a value and SET to confirm
and move on to the next setting.
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM4
length, walk 10 paces and divide the distance traveled
by 10.
CHANGE INDIVIDUAL CLOCK OR USER
PROFILE SETTINGS
If after the initial setting of the clock / user profile (as
detailed in previous section), you wish to change the clock
time or edit one of the user profile settings, simply:
1. Press MODE to navigate to Clock or User Profile
Mode.
2. Profile Mode only – use / to scroll to the setting
you wish to change.
3. Press and hold SET to enter setting mode.
4. Press
/ to change a value and SET to confirm.
SWITCHING BETWEEN OPERATION MODES
Press MODE to switch between the 6 operation
modes:
• Daily
•Target
•Timer
• 7-day Memory
• User Profile
• Clock
The modes are described in the sections that follow.
DAILY
To view the step, distance and calorie display:
1. Press MODE to
navigate to Daily Mode.
2. Press
5
to switch between the 3 displays;
STEP
DISTANCE
EN
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM5
EN
CALORIE
TARGET
To set step, distance or calorie target:
1. Press MODE to
navigate to Target
Mode.
2. Press and hold SET
for 2 seconds to enter
setting mode.
been set, start walking
to activate the
pedometer. The GO!
screen will appear to
confirm that the unit is
starting to monitor
your progress.
2. While you are walking, the ESTIMATED FINISH TIME
(EFT) will periodically appear to advise you how long
it will take to complete your target, based on your
current pace. The target bar at the bottom of the
display will move from left to right (start to finish) to
show your progress.
3. Press to toggle between the EFT and remaining
steps, distance or calories left until target is reached.
4. When target walk is
complete, FINISH will
appear and a beep will
sound.
3. Press / to select STEP, DISTANCE or
CALORIES.
4. Press SET to confirm.
5. Press
To use target:
1. Once the target has
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM6
/ to change the value of each digit, and
SET to confirm and move on to the next setting.
5. To reset the target for the next user session, press
and hold RESET.
TIMER
When the timer is running, it will measure steps, distance
and calories. These measurements are not linked to the
daily measurements and are only related to the time spent
walking while the timer is on.
6
To set timer:
1. Press MODE to
navigate to Timer
Mode.
VIEW TOTAL WEEKLY RECORDS
1. Press MODE to
navigate to Memory
Mode.
EN
2. Press and hold SET for 2 seconds to enter setting mode.
3. Press
To use timer:
• Press
• Press and hold
• Press
you are in another mode,
is running.
/ to select countdown or count-up timer
and press SET. If the countdown timer is selected
you will need to set the hr:min:sec by pressing /
to change a value and SET to confirm.
to start / stop the timer.
to reset the timer.
repeatedly to view timer step, distance and
calories values.
When you are in the timer display, will show. If
will flash to indicate the timer
MEMORY
The pedometer has a 7-day memory function. You can
view total weekly or daily step, distance and calorie
records.
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM7
2. Press
to toggle between the total weekly step,
distance and calorie display.
VIEW DAILY RECORDS
1. Press MODE to navigate to Memory Mode.
2. Press
3. Press
•Target achieved =
•Target not achieved =
7
to enter the daily record display.
repeatedly until you reach the day you wish
to view. When you have selected the day you wish to
view, a 1-second display will show to advise you if
you reached that day’s target or not:
smiley face and high
beep sound.
sad face and low beep
sound.
EN
4. Press to toggle between your chosen day’s step,
distance and calorie display.
IMPORTANT At midnight all accumulated daily data
will be stored for a period of 7 days. Therefore, once a
memory has been stored for 7 days it is replaced with
new data from the 1
st
day of the new week.
The bar at the bottom of the display will indicate
which day’s memory record you are looking at.
CLEAR ALL RECORDS
Press and hold RESET.
ALARM
When in the Clock Mode, press to toggle between the
Clock and Alarm Mode.
To set the alarm:
1. Press MODE to navigate to the Clock Mode.
2. Press
to switch to
the Alarm Mode.
3. Press and hold SET to enter the setting mode.
4. Press
/ to change a value and SET to confirm
and move on to the next setting.
5. The setting sequence is:
• Hour
• Minute
• On / Off
To stop the alarm sound, press any key.
EXERCISE SCHEDULE REMINDER
Using SmartSync software, you can set up to 7 alarms to
remind you to exercise, allowing you to specify an activity
goal in steps, distance or calories.
To set a exercise reminder:
For detailed information on the steps needed to set the
reminder alarm, see the software Help file.
When a exercise reminder alarm sounds:
1. The unit will beep and
remind will flash on the
screen.
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM8
2. Press
distance or calories).
8
to view the preset activity goal type (steps,
3. Press
back-up beep will sound again after 5 minutes.
again to view the activity goal value.
If no key is pressed when the alarm sounds, a
CONNECTING TO YOUR PC
Data can be transferred to a PC directly from the
pedometer or by using the base.
To connect the pedometer to a PC:
1. Insert the USB cable into your PC.
2. Unclip the cover of the USB port on the pedometer.
3. To connect directly to the pedometer: insert the USB
cable into the port on the pedometer.
4. To connect via the base: Insert the USB cable into the
base. Then, place the pedometer onto the base so that
the base USB connector is inserted into the pedometer
USB port.
EN
• When connected, ‘PC’ will appear on the LCD screen
and the LED will be lit.
• When data is being transferred the green LED will
flash.
If connection is interrupted, please remove the
USB cable from your PC and re-insert.
BACKLIGHT / KEYPAD LOCK / RESET
To turn the backlight ON for 3 seconds, press .
9
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM9
EN
To turn the keypad lock ON / OFF, press and hold .
To reset the unit, remove and then re-insert the battery.
BATTERIES
appears when the battery is low and needs replacing.
Protect the environment by taking exhausted
batteries to authorized disposal stations.
1. Unscrew to open back cover.
2. Insert 1 CR2032 battery.
3. Place the cover back and tighten the screw.
PRECAUTIONS
This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are a
few precautions:
• Do not subject the unit to excessive force, shock,
dust, temperature or humidity, which may result in
malfunction, shorter electronic life span, damaged
battery and distorted parts.
• Do not immerse the unit in water. If you spill liquid
over it, dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive
materials.
• Do not tamper with the unit’s internal components.
Doing so will invalidate the warranty on the unit and
may cause unnecessary damage. The unit contains
no user-serviceable parts.
• Only use fresh batteries as specified in the user’s
instructions.
• Due to printing limitations, the displays shown in this
manual may differ from the actual display.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
• Do not dispose this product as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
• Do not use rechargeable batteries with this product.
• Remove the batteries if storing this product for a
long period of time.
The technical specifications for this product and
the contents of the user manual are subject to change
without notice
10
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM10
SPECIFICATIONS
TYPE DESCRIPTION
Pedometer 36 x 53 x 50 mm
L x W x H (1.4 x 2.1 x 2.0 in)
Base 67 x 65 x 36 mm
L x W x H (2.7 x 2.6 x 1.4 in)
Pedometer weight 37 g (1.3 oz)
Base weight 26 g (0.9 oz)
Step counter 0 to 99,999 steps
Distance travelled 0 to 999.99 (in km or miles)
Stride distance 28 to 152 cm (11 to 60 in)
Calorie display 0.1 to 9999.9 kcal
Body weight range 29 to 154 kg (64 to 340 lbs)
Pulse range 30 to 240 bpm
Operating temperature
Storage temperature
Power 1 x CR2032 3V cell battery.
-10°C to 40°C (14°F to 104°F)
-20°C to 60°C (-4°F to 140°F)
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn
more about Oregon Scientific products such as digital
cameras; MP3 players; children’s electronic learning
products and games; projection clocks; health and fitness
gear; weather stations; and digital and conference
phones. The website also includes contact information
for our Customer Care department in case you need to
reach us, as well as frequently asked questions and
customer downloads.
We hope you will find all the information you need on our
website, however if you’re in the US and would like to
contact the Oregon Scientific Customer Care department
directly, please visit:
www2.oregonscientific.com/service/default.asp
OR
Call 1-800-853-8883.
For international inquiries, please visit:
www2.oregonscientific.com/about/international.asp
11
EN
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM11
EN
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this SmartSync
Pedometer with PC Download (PE830) is in compliance
with EMC directive 89/336/CE. A copy of the signed and
dated Declaration of Conformity is available on request
via our Oregon Scientific Customer Service.
12
PE830_EU_M_EN_R1.p65 2006.8.16, 4:47 PM12
Loading...