Technical Information ................................. 9
About Oregon Scientific .............................. 9
EN
manual-E.p652004/5/18, PM 12:173
INTRODUCTION
EN
This product integrates a highly sensitive
microphone set-up and three built-in surround
sound speakers, allowing users from all around the
room to participate in conference discussions.
Some features of this product include:
• Backlit LCD
• Time, date, and language settings
• Tape recorder connectivity
• Contact list
• Acoustic and line echo elimination
SAFTEY AND CARE
Your OS200 conference phone has been designed
to provide you with many years of reliable
service. To ensure that you use the product
safely and correctly, observe the following safety
warnings:
• Your OS200 conference phone is dependent
on AC power source for operation, and may
not work during power and telephone outages.
• Do not use your OS200 conference phone in
or near water, as this can cause damage to
the unit and personal injury through electric
shock.
• Do not attempt to open or modify your
telephone.
• The product, specifications and contents of this
user manual are subject to change without
further notice.
• Figures and display examples in this user
manual are for reference only, and may differ
slightly from the actual product.
CARE AND MAINTENANCE
To clean the unit use a soft dry cloth, always
keep it away from moisture.
1
manual-E.p652004/5/18, PM 12:184
KEY FEATURES
TOP VIEW
BOTTOM VIEW
EN
1. Loudspeaker
2. Microphone status indicators (blue / red)
3. Microphone
4. Remote control sensor
5. Display
6. Keypad
1. Output for tape recorder
2. Power supply
3. Telephone line input
4. Microphone inputs
manual-E.p652004/5/18, PM 12:185
2
EN
LCD
KEYP AD
1, space, . (period)
2, A, B, C, Å, Ä, Á,À,a,b,c,å,ä,á, à
3, D,E,F,É,È,d,e,f,é,è
4, G,H,I,g,h,i
When using the OS200 for the first time, you must
first connect the unit to a power supply and
analogue phone line using the supplied adaptor
and connection cables. This phone does not work if
connected to a digital line.
Power
adaptor
connects to
mains outlet
SELECT LANGUAGE
1. Press
2. Scroll to Language menu by pressing
until you reach the icon display below. Press
to confirm.
Connect to telephone line
Connectors
underneath
OS200
SETTING THE TIME AND DATE
1. Press
2 Scroll to Time/Date menu by pressing
.Press to confirm.
3. Press
to scroll between the DATE,
MONTH, YEAR, HOUR, and MINUTES fields.
4. Press
to select a field to adjust. Use
to adjust values, then to
confirm.
5. Select other fields as necessary. Press
to
go back to the main menu.
PROGRAMMING THE R KEY
Depending on what region the phone will be used
in, the R key should be programmed to make sure
R-Pulse times are compatible with most PBXs
(private telephone networks).
NOTE: The default setting is R2
Value Time (ms)PBX / country
R165Ericsson MD110
R2100Scandinavia, Europe
R3150Reserved
R4270Germany, France
R5600USA
1. Press
2. Scroll to Special Settings menu by press
.
. Press to confirm.
EN
3. Choose the desired language by pressing
.
4. Press
manual-E.p652004/5/18, PM 12:187
to confirm.
3. Scroll to the R-function setting by press
. Press .
4
4. Choose the required R-pulse value with .
EN
5. Press
MAKING PHONE CALLS
INCOMING CALLS
1. Press
2. Press
OUTGOING CALLS
To make an outgoing call:
1. Press
2. Dial the desired number.
3. Press to connect.
4. Press
TIP: To preview, first enter the phone number.
3-WAY CALLING
This feature allows you to talk with up to two other
parties simultaneously, contact your local telephone
operator for the availability of this service.
1. Enter the first phone number.
2. Press
3. After the first call is connected, press
get a new dial tone.
to save changes and exit.
When an incoming call is
received, a ringing tone will
be heard and the microphone indicator light will
light up.
to answer.
to end the call.
.
Indicates the duration of
the call.
to end the call.
.
4. Enter the second phone number.
5. When the second call is connected press
and then to connect all parties.
NOTE: If your second call was not answered, press
and then to return to the first call.
CALL SETTINGS
SPEAKER VOLUME
During a call, you can
press
the volume.
MANUAL TUNING
The OS200 will automatically modify its properties
for better quality sound in the room and over the
telephone line. However, tuning can be initiated
manually by pressing
noise will be heard).
KEY P AD TONE
When dialling a number, touch-tones will still be
heard even though the keypad tone function is
switched off.
1. Press
2. Scroll to Special Settings menu
3. Press
4. Scroll to Keypad Tone setting
5. Press
to
.
.
.
to change
simultaneously (brief
.
.
5
manual-E.p652004/5/18, PM 12:188
6. Select to turn keypad tone on/off:
•
•
7. Press
to save changes.
RING VOLUME
1. Press .
2. Scroll to Ring Signal Volume menu
USING THE PHONEBOOK
ADDING CONTACTS T O PHONE BOOK
Add numbers to your phone book to organize your
contacts and enjoy the convenience of speed dial.
1. Press
2. Scroll to the Phone Book menu
.
3. Press
4. Scroll to “Add entry”
.
.
.
.
EN
3. Press
4. Press
ringer off .
5. Press
.
to adjust the volume or switch the
to save changes
CALL FUNCTIONS
REDIAL
You can call the last number dialled by:
1. Press UP to display the last number dialled.
2. Press
3. Press
MUTE
This feature allows you to turn the microphone off
during private discussions.
1. Press
2. Press
to dial the number.
to end the call.
to activate.
to deactivate.
ONLED (red)
OFFLED (blue)
The either:
• Press
appear automatically.
or
• Enter a telephone number using the keypad.
5. Press
6. Enter a name using the keypad:
Press the number that corresponds with the
desired letter until you find the right one, pause
and then enter the next letter.letter. For more
information about how to enter a name using
the keypad, please refer to the “Keypad”
subsectonsubsection in “Key Features”.
7. Press
TIP: • Press
• Press
number.
• Press
NOTE: You can save up to 50 messages in your
phonebook.
and the number last dialled will
.
to save changes.
to change caps.
key to delete a character/
to cancel.
manual-E.p652004/5/18, PM 12:189
6
EDITING CONTACT LIST
EN
1. Press .
2. Scroll to the Phone Book menu
3. Press
4. Using the
.
key select EDIT.
7. Press
.
Confirmation appears in the display
• Press
• Press
to select.
to cancel.
to confirm the deletion.
5. Press
6. Scroll to the name you want to edit
7. Press
8. Edit number using the keypad.
9. Press
10. Edit name using the keypad.
11. Press
TIP: • Press
• Press
.
.
.
to save changes.
key to delete a character/
number.
to cancel.
REMOVING A CONTACT
1. Press
2. Scroll to the Phone Book menu
3. Press
4. Select “Erase”
5. Press
6. Scroll to the name you wish to delete
.
.
.
.
SPEED DIAL
.
.
.
You can dial previously stored numbers in your
book by:
1. Scroll through witht
contact .
2. Press
3. Press
to call contact.
to end call.
to find the desired
7
manual-E.p652004/5/18, PM 12:1810
ACCESSORIES AND SPARE PARTS
Please contact your local distributor for details
about the availability of accessories and spare
parts.
TELE PLUGS
Item No. Description
Denmark
Finland
France
Germany
UK
Netherlands
Norway
Spain
Sweden
Switzerland
SPARE PARTS
Item No. Description
Power supply and analogue
POTS network cable, 7.5m
(25ft)
Mains transformer 12V DC
(Europe)
Mains transformer 12V DC
(UK)
Mains transformer 12V DC
(US)
ACCESSORIES DESCRIPTIONS
ACOUSTICS
The OS200 delivers clear audible sound to the
user. For optimum results the unit should be
positioned accordingly as shown here:
• Layout for room sizes up to 30m
2
(323 sq. feet).
TROUBLESHOOTING
PROBLEMCHECK THIS
Third party calledPress
does not answerto return to the first call.
Audio quality is not Manually tune the
clearacoustics (
Called party cannot Check that the microhear youphone is active (red light /
Unit not functioning Bypass any extension
correctlycables and connect your
unit to the phone socket
directly
Disconnect any extra
microphnoes attached
and try again
When using theInsert a pause using the
3-way callingkey when entering
function and younumbers in the phone
cannot get abook.
second dial tone
and then 1
)
)
EN
manual-E.p652004/5/18, PM 12:1811
8
Cannot save aPhone book is full (),
contact “Memorydelete a contact to make
EN
Full” is displayedroom ().
on LCD
TECHNICAL INFORMATION
MAIN UNIT
Mains transformer: DC transformer240V
(Europe)AC/12 V DC; 700
Mains transformer (UK): DC transformer240V
Network interface: Analogue PBX or
Power supply and: 7.5 metres, RJ-11
network cable(line), EIAJ Class IV
Recommended room: Reverberation time:
conditions<0.5 sec.
Background noise: <45 dB(A).
Frequency response: 200 – 3700 Hz.
Loudspeaker volume: 85 dB SPL
Room echo suppression: 208 ms.
Line echo suppression: 25 ms.
Automatic calibration: <1 ms impulse (not
Tape recorder output: 3.5 mm tele jack.
Dimensions: Diameter 232 mm.
Weight: 700 g.
Temperature range: 5 – 40°C in operation.
Humidity: 20 % – 80 % non-
9
mA.
AC/12 V DC; 700
mA.
PSTN, RJ-11.
(power).
(increased if extra
microphones are
used).
discernible).
Contact for connection of tape
recorder may only be
connected to a SELV
voltage in accor
dance with SS-EN 60
950.
condensing.
EMC: EN 50 081-1:1992
EN 55 024-1:1998
EN 60950
Electrical safety: EN 60950.
T elecom approval POTS: EUROPEAN TBR21.
Keyboard: 19 keys.
Compatibility: OS200 can be con-
nected to any PBX
equipped with a
POTS extension, for
example Ericsson:
MD110, Fenix.
Siemens: Hicom.
Nortel: Meridan.
Philips:Sopho.
Alcatel: 4200, 4400.
Ascom: Ascotel.
ABOUT OREGON SCIENTIFIC
Visit our website www.oregonscientific.com to
learn more about your voice recorder and other
Oregon Scientific products such as hand-held
organizers, alarm clocks, and weather stations.
The website also includes contact information for
our customer service department, in case you
need to reach us.