Oregon BAR210U, BAR210A, BAR210 User Manual
EN
1
Weather Light
Model: BAR210 / BAR210U / BAR210A
USER MANUAL
CONTENTS
Overview....................................................................2
LCD Display............................................................2
Back View................................................................2
Bottom View............................................................2
Remote Sensor.......................................................3
Getting Started..........................................................3
Power Supply..........................................................3
Remote Sensor..........................................................3
Sensor Data Transmission.....................................4
Clock ..........................................................................4
Clock Reception... ..................................................4
Set Clock................................................................4
Change Display.........................................................5
Weather Forecast......................................................5
Temperature..............................................................5
Reset..........................................................................6
Precautions...............................................................6
Specifications...........................................................6
About Oregon Scientific..........................................7
EU-Declaration of Conformity.................................7
FCC Statement...........................................................7
Declaration of Conformity.....................................8
BAR210 EN R8.indd 1 2/15/08 12:10:14 PM
EN
2
OVERVIEW
LCD DISPLAY
1
2
3
4
5
6
1. Weather forecast icons
2. Clock signal reception indicator
3. Time / temperature display
4. Outdoor sensor communication indicator
5. Low battery indicator
6. Time zone offset display
BACK VIEW
1
2
1. Ventilation hole
2. Adaptor socket
BOTTOM VIEW
1
2
3
4
5
6
BAR210 EN R8.indd 2 2/15/08 12:10:26 PM
EN
3
1. / : Increase / decrease setting; activate /
deactivate clock reception signal
2. RESET: Reset unit to default settings
3. AUTO ON / OFF: Select auto toggle mode
4. CLOCK: Set time and display mode
5. °C / °F: Select temperature unit and display mode
6. Battery compartment
REMOTE SENSOR
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
5. CHANNEL switch
GETTING STARTED
POWER SUPPLY
Batteries serve as back up power supply for the clock.
For continuous use of LCD backlight, always plug in
the adapter socket. Make sure the socket outlet is
easily accessible to the unit.
To insert batteries:
1. Remove the battery compartment and insert the
batteries, matching the polarities.
2. Press
RESET after each battery change.
indicates main unit batteries are low.
REMOTE SENSOR
The main unit can be connected to only 1 remote
sensor.
To set up the outside sensor:
1. Open the battery compartment.
2. Select a channel then press RESET.
3. Close the battery door.
4. Place the outside sensor within 30 m (98 ft) of the
main unit using the table stand or wall mount.
TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.
BAR210 EN R8.indd 3 2/15/08 12:10:30 PM
Loading...