Oregon BAR206A, BAR206 User Manual
EN
1
Weather Forecast Station with
Atomic Time
Model: BAR206 / BAR206A
USER MANUAL
CONTENTS
Overview .....................................................................2
Front View ..............................................................2
Back View
..............................................................2
R
emote Sensor .......................................................3
Getting Started ...........................................................3
Insert Batteries ........................................................
3
Remote Sensor ........................................................... 3
Sensor
Data Transmission ...................................... 4
Clock ...........................................................................4
Clock Reception ......................................................
4
Manually Set Clock .................................................
5
Weather Forecast ....................................................... 5
Temperature And Humidity ......................................6
Ice Warning .............................................................
6
Backlight ....................................................................6
Reset ........................................................................... 6
Precautions ................................................................ 6
Specifications ............................................................
7
About Oregon Scientific ...........................................
7
EU-Declaration of Conformity ..................................7
FCC Statement ........................................................... 7
D
eclaration of Conformity ........................................8
EN
2
OVERVIEW
FRONT VIEW (FIG 1)
1. Remote sensor reception indicator
2. Indoor temperature
3. Indoor humidity
4. Clock signal reception indicator
5. MODE: Change settings / display
6. LIGHT: Activate backlight for 5 seconds
7. / : Increase / decrease setting; activate /
deactivate clock reception signal
8. Outdoor temperature
9. Weather forecast
10. Clock with weekday
11. MEM: View current, maximum and minimum
temperature / humidity
12. Ice alert LED indicator
BACK VIEW (FIG 2)
EN
3
2. Insert the batteries, matching the polarities (see FIG 2).
3. Press
RESET after each battery change.
LOCATION MEANING
Clock / alarm and indoor Main unit batteries low
temperature area
Outdoor temperature area Sensor batteries low
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1. Open the battery compartment (see FIG 3).
2. Select a channel then press RESET.
3. Close the battery door.
4. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any
location on the exterior of the home at a height of not
more than 1.5 m (5 ft) and which can shield it from direct
sunlight or wet conditions for an accurate reading.
1. °C / °F: Select temperature unit
2. RESET: Reset unit to default settings
3. EU / UK: Select the nearest radio signal (BAR206
only)
REMOTE SENSOR (FIG 3)
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET hole
5. CHANNEL switch
GETTING STARTED
INSERT BATTERIES
1. Remove the battery compartment.
2
3
4
5
1
Loading...