Oregon A107038 User Manual

CHAIN

Oregon

91P chain features top-performing Chamfer Chisel™ cutters and a notched bumper

drive link for low-kickback performance, good chip flow, and a smooth cutting action. The twin

corners of the cutters on 91P chain deliver superior performance on the many popular saws

which use low-profile 3/8”-pitch chain. 91P chain also features four-way symmetrical tie straps

which simplifies the joining of chain loops.

91 chains

91P chain is

CHAIN PITCH AND GAUGE

, because every cut counts

91P

twin-cornered

Arborists, orchardists,

farmers, landscapers,

91P LOW-PROFILE 3/8”-PITCH

™

CHAMFER CHISEL

CHAIN

FEATURES BENEFITS

Choose Oregon , because every cut counts

A professional Chamfer Chisel™ chain for experienced users of small chainsaws who prefer a low-profile 3/8”-pitch chain.

A specialized version of 91VS with extra-heavy-duty chrome plating to cut effectively in extremely dirty, abrasive conditions.

What’s the difference between a 3/8”-pitch chain,

91P chain

TOP-PLATE

TIE STRAP

91P meets the reduced-kickback requirements of ANSI B175.1 when

tested on a representative sample of chainsaws. This chain significantly reduces

the risk of chainsaw kickback while maintaining high cutting performance. ALL

CUTTING CHAIN CAN KICK BACK, WHICH MAY RESULT IN SEVERE INJURY TO

THE SAW OPERATOR OR BYSTANDERS. Users should be cautioned to operate their

saw safely, and to read and follow all warnings in their saw operator’s manual and

Oregon

91P chain-maintenance instructions.

Always file depth gauges back to their original rounded

products, contact your authorized Oregon

distributor, or:

PO Box 22127 • Portland, OR, U.S.A. 97269-2127

505 Edinburgh Rd. N. • Guelph, Ontario, Canada N1H 6L4

WARNING

Standard 3/8”-pitch chains are full-size professional-type chains intended for

Low-profile 3/8” chains have the same pitch, but there are differences in the

Assembled File Guide, 5/32”

Full-size, 5 3/4” dia.

Mini Grinder Wheels, 4 1/8” dia.