Oreck XL PLATINUM PILOT User Guide

79052-01 REV A

User’s

Guide

Powerful, Lightweight Upright Vacuum

ORECK XL

Platinum Pilot ™ Series

Important!

Read all instructions carefully, and keep for future reference.

Microban® is a registered trademark of Microban Products Company Corporation, North Carolina.

Safety

E N G L I S H

General Warnings

IMPORTANT SAFETY INSTRUCTIONS!

When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire, electric shock, or injury:

• Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing.

• Do not use outdoors or on wet surfaces.

• Do not operate the unit while in the upright and locked position.

• Do not let the unit run while in any one stationary position for any period of time. Keep the unit moving while in operation.

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center or call customer service at: US: 1-800-989-3535 Canada: 1-888-676-7325

• Do not pull or carry by cord, use cord as a handle, close door on cord, or pull cord around sharp edges or corners.

• Keep cord away from heated surfaces.

• Do not run appliance over cord.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow.

• Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.

• Do not use to pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Do not use without filter bag assembly in place.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or combustible liquids, such as gasoline or lighter fluid, or use in areas where they may be present.

• Do not use appliance in an enclosed space where flammable, explosive or toxic vapors are given off by oil base paint, paint thinner, some mothproofing substances, or in an area where flammable dust is present.

• Do not pick up toxic material such as chlorine bleach, drain cleaner, gasoline, etc. with this appliance.

• Use caution when vacuuming over area rug edges and fringe.

Enjoy

Call

Click

Visit

SAVE THESE INSTRUCTIONS

Household Use Only

A polarized plug has one rounded prong and one straight prong. The rounded end goes into the longest socket slot. To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. Do not alter the plug in any way.

Thank you for purchasing our top-of-the-line Oreck XL® U7200 Platinum Pilot™ Series upright vacuum cleaner. It is the quietest, most powerful upright Oreck has ever developed. The U7200 features a 10-year warranty, 10 free tune-ups, high speed for cleaning carpet and low speed for cleaning bare floors. The HEPA-Celoc® filtration traps up to 99.99% of all particles including pollen, mold spores and pet dander. And because it’s an Oreck, it can help restore the nap of your carpet the very first time you use it.

To speak with an Oreck representative call: USA: 1-800-989-3535 Canada: 1-888-676-7325

On the web, point and click at: www.oreck.com

Visit any of our nearly 450 Oreck Clean Home Centers. To find the nearest store, please call

888-oreckstore (888-673-2578) or visit www.oreckstore.com.

Contents

Total Cleaning System

E N G L I S H

Safety ............................................................................................................................................ 2

General Warnings .................................................................................................................... 2

Operation ........................................................................................................................................ 3

Parts List ................................................................................................................................... 3

Assembling the Handle Tube .................................................................................................... 4

Operating the U7200 ................................................................................................................. 4

Storage ....................................................................................................................................... 4

Operating Instructions ................... ........................................................................................... 4

General Information ....................................................................................................................... 5

Odor Fighting Filter Dust Bags ................................................................................................ 5

Microban® ............................................................................................................................... 5

HEPA-Celoc® Hypo-Allergenic Filter System ........................................................................ 5

360º Glide System .................................................................................................................... 5

The Belt .................................................................................................................................... 5

Lubrication ............................................................................................................................... 5

Maintenance .................................................................................................................................. 6

Replacing Disposable Odor Fighting Dust Bag ....................................................................... 6

Replacing Worn Belt ................................................................................................................. 6

Adjusting or Replacing Brushroll ............................................................................................. 6

Replacing Edge Brush .............................................................................................................. 7

Replacing the LED Light ......................................................................................................... 7

Stuffing or Blockage ................................................................................................................. 7

Troubleshooting ............................................................................................................................. 8

Parts .............................................................................................................................................. 8

Accessories & Replacement Parts ............................................................................................ 8

Warranty ........................................................................................................................................ 9

Operation.

To assist you in

identifying your

vacuum’s components,

the parts have been

numbered as follows.

Parts List

1 Helping Hand® Handle with soft grip 2 On/Off Switch 3 Cord Dump 4 Handle Tube 5 Deﬂector 6 Bag Dock 7 Carry Handle 8 Zipper 9 Fascia (includes light lens) 10 Main Bumper 11 Edge Brush 12 Belt Door 13 Power Cord 14 Cord Assembly 15 Handle Collar 16 Deﬂector (rear view) 17 Carry Handle Clamp 18 Collars 19 Lower Tube 20 Elastic Bag Strap 21 Scroll Fascia 22 Fan Housing 23 Rear Wheels 24 Cover 25 Outer Bag Upper Cover 26 Outer Bag Lower Cover 27 Outer Bag 28 Power Head 29 Disposable Filter Dust Bag

Operation

E N G L I S H

Assembling the Handle Tube

Align slot in handle tube with tab in connector.

Insert the handle tube into connector. Tighten collar at base of handle tube onto the connector until it locks, “snaps”.

Snap cord assembly into the cord clip located

on the left side of the collar. Leave excess cord at the power head to allow movement.

Velcro® outer bag upper cover panel in place.

1 2 3

Operating the U7200

Make sure the Disposable Odor Fighting dust bag is in place. DO NOT operate the cleaner without a dust bag. Plug the power cord into an electrical outlet and press the On Low ( l ) - On High ( ll ) - OFF ( O ) switch on handle assembly when ready to operate.

Up-Position Lock - Place foot on power head and lean handle back gently to release lock for vacuum

use. Return handle to the full upright position to engage lock. The handle should be rotated to center before returning to upright position. Note: Do not operate the unit while in the upright and locked position. Do not let the unit run while in any one stationary position for any period of time. Keep the unit moving while in operation.

Carry Handle - Raise the carry handle located on back of the unit for easy lifting, carrying, and stair

vacuuming. Lower the handle during use to eliminate obstruction.

Easy Power Cord Storage - Raise carrying handle and wrap power cord around carry handle and Helping

Hand® handle.

To release cord, twist cord dump located on Helping Hand® handle 1/2 turn. Slide cord off handle.

4 5 6 7

Storage

Both the Helping Hand® handle and carry handle can be used for convenient, space saving storage of cleaner. Hang cleaner by carry handle on a sturdy fastener or Helping Hand® handle on a closet rod.

Operating Instructions

This new ORECK Upright is one of the finest, fastest, and strongest units in its class. You’ll love the way it cleans, gets under things, and it’s SO lightweight and easy to use. The following are a few simple suggestions regarding its operation:

1. When inserting a new disposable dust bag -FIRST PUFF OUT and OPEN THE BAG.

2. When the disposable dust bag is full, REPLACE IT.

3. If at any time the machine does not pick up properly or makes an unusual noise, STOP OPERATION and service.

4. Although your upright will pick up pins, paper clips, and other small objects, it is recommended that these be removed from the floor before you vacuum. Failure to do so may result in permanent damage to the motor suction fan and its housing.

5. WARNING: Do not use your vacuum cleaner on damp or wet surfaces. This will cause damage to the vacuum cleaner and is dangerous to the user. Damage caused by use on wet or damp surfaces is not covered under warranty.

6. For optimal performance, replace the belt every 6 months.

7. Check the disposable filter dust bag at least once a month.

8. DO NOT run the vacuum cleaner over the cord. The revolving brush could damage the cord.

9. Use caution when vacuuming over area rug edges and fringe.

Velcro® is a registered trademark owned by Velcro Industries B.V. Limited Liability Company Netherlands.

General

E N G L I S H

The performance of your new cleaner greatly depends upon care and maintenance. The instructions in this manual will guide you in performing basic care and maintenance. To obtain the most satisfying years of service read the instructions and keep them handy for future reference.

Information

Disposable Odor Fighting Dust Bags

Disposable Odor Fighting dust bags play a very important role in the efficiency of your ORECK vacuum cleaner. The purpose of the dust bag is to trap dirt, but at the same time it must be porous enough to allow air to pass through. If the dust bag becomes clogged, no air can pass through the cleaner and cleaning cannot take place, regardless of the cleaner’s power.

To keep your cleaner operating at maximum efficiency, change the dust bag frequently.

DO NOT FILL ABOVE THE LINE INDICATED ON THE DUST BAG.

Be sure the disposable filter dust bag is installed properly. Note: All disposable filter dust bags are not the same. Your ORECK disposable dust bags have been designed to be used with the ORECK cleaner. Using bags other than genuine ORECK TYPE CC disposable bags will affect the cleaning ability of your cleaner and could cause damage to it.

Microban

Oreck added Microban® to the key touchpoints of the unit (handle and bag dock) while manufacturing this upright vacuum cleaner in order to inhibit the growth of bacteria in and on the vacuum. When microbes, such as bacteria, mold and mildew come in contact with the product surface, Microban® penetrates the cell wall and disrupts key functions so they cannot grow or reproduce. Your Oreck will stay cleaner, longer.

HEPA-Celoc® Hypo-Allergenic Filter System

The HEPA-Celoc outer bag of your vacuum cleaner is high filtration medical material designed to filter the smallest of dust particles. It is important the inside of the outer bag be cleaned. Vacuum the inside of the outer bag as needed. If desired, the HEPA-Celoc outer bag can be replaced for renewed efficiency. The Celoc layered disposable inner dust bag is designed for optimal performance. Depending on cleaning environment, it may need to be changed as often as once a month. Change it more often if it is used in extremely dirty areas. Increase the cleaning power of your vacuum by changing the bag often.

360º Glide

Your new Oreck Upright features the 360º Glide turning system. The 360º Glide offers an entirely new level of maneuverability to your lightweight Oreck Upright. No installation necessary. Simply turn the handle of your Oreck Upright to maneuver the unit. Go left, Go right, make sharp turns under and around furniture.

The Belt

The belt on your vacuum cleaner controls the speed of the revolving brush and is very important for the effective operation of the cleaner. If the belt becomes stretched or cut, it will cause the revolving brush to stop completely or slow down. See instructions in the manual for replacing belt.

Note: An extra belt is stored in the baseplate of your cleaner. When buying replacement belts, use ONLY ORECK genuine belts. Belts other than Oreck belts will not operate the revolving brush correctly and may create undue stress which will cause damage to the motor and brush bearings. Using belts other than ORECK belts will void the warranty.

Lubrication

The vacuum cleaner motor bearings are factory lubricated and sealed. Further lubrication is not required.

CAUTION Wood Floors, Soft (Vinyl, Asphalt Tile, etc.) Floor Surfaces and Polished Floor Finishes

Use floor and floor finish manufacturer’s recommended methods of cleaning. The roller brush may also scuff very soft finishes. Do not operate the unit while in the upright and locked position. Do not let the unit run while in any one stationary position for any period of time. Keep the unit moving while in operation.

Note: At least once a month, check for and remove excessive lint, string or hair from revolving brush. Patented cleaning grooves on brush roll will allow easier cleaning. Wipe the outside of the cleaner with a damp cloth. Also clean the connector deflector assembly area, base of cleaner and fan housing area. If there is dust in the outer bag, vacuum it or shake it out.

A little preventative maintenance will keep your cleaner looking new and will ensure continued cleaning effectiveness.

Microban® is a registered trademark of Microban Products Company Corporation, North Carolina.

E N G L I S H

ENFONCEZ JUSQU’À

ENTENDRE UN BRUIT

PRESIONE HASTA

ESCUCHAR UN

CHASQUIDO DE SUJECIÓN

Replacing Disposable Odor Fighting Dust Bag

WARNING: Unplug cord from electrical outlet before servicing. BAG REMOVAL:

Unzip outer bag completely.

Pull bag cardboard collar to release bag dock door from connector. Bag dock door will hinge downward.

Gently pull bag cardboard collar upward out of the bag dock. Saniseal® dust seal will close automatically.

BAG INSTALLATION:

Slide the cardboard collar completely onto bag dock door. Firmly push bag dock door with both thumbs on indication point until it snaps.

Maintenance

11 12

9 10

Replacing Worn Belt

WARNING: Unplug cord from electrical outlet before servicing.

Remove the replacement belt from the storage channel.

Remove the door by removing the hold down screw located on side of power head.

Fold door away from the power head and lift it away. Remove the belt from the motor drive shaft and brush roll pulley.

Loop the new belt over the brush roll pulley. Place the opposite end of the belt on the motor drive shaft.

Replace the door by placing the bottom tab on door into slots located inside power head and pressing the

door closed. Replace the hold down screw and tighten.

15 16

Adjusting or Replacing Brushroll

WARNING: Unplug cord from electrical outlet before servicing.

Your Oreck Vacuum comes with the brush roll set at the “NORMAL” position for most types of carpets. When using vacuum primarily on Berber Carpets, you can adjust brushroll to the “SPECIAL” setting for increased performance.

Remove the base plate by removing 5 screws. Then, remove the belt and brushroll from the housing. Rotate both end cards of the brush roll to show “SPECIAL” and replace in the holding channels of the housing.

Note: The one marked “SPECIAL” has several ribs on top of the end card.

The brush end card setting marked “NORMAL” has one rib. When rotating bearings, make sure both end card

assembly settings are the same and face up when replacing the brushroll.

Reassemble the belt. Reassemble the baseplate.

1817

E N G L I S H

SPECIAL NORMAL

20 21 22 23

24 25

Replacing Edge Brush

WARNING: Unplug cord from electrical outlet before servicing.

Turn the power head over. With baseplate facing up, remove the screw located in the center of each edge brush.

Remove both edge brushes and replace with new ones. Replace both screws and tighten.

Replacing the LED Light

The light assembly should be replaced by an Oreck authorized service center whenever it fails to light during operation.

Stufﬁng or Blockage

IMPORTANT: On plush and new carpets, stuffing may occur inside the intake tube and the lower tube assembly. This is due to excessive fuzz and loose cuttings in the carpet. Stuffing could occur for the first few cleanings until all the loose material is removed. Due to the high efficiency of the cleaner, many older carpets will cause stuffing when the cleaner is first used on them. If your vacuum cleaner does not pick up properly, or makes unusual noise and the outer bag does not fluff up or balloon open, follow these steps:

WARNING: Unplug cord from electrical outlet before servicing.

Check for blockage at the mouth of the intake opening. If there is blockage, remove it with long-nose pliers,

a screwdriver or coat hanger. If you can not reach the blockage, remove baseplate. Remove the base plate by removing 5 screws (see “Adjusting or Replacing Brushroll”). If the blockage is not at the base, remove lower tube. Unhook bag spring, releasing bottom of bag. Open elcroed Outer bag lower cover to gain

access to Collars and Lower Tube.

Twist lower collar counterclockwise to slide up. Pull tube out of base. Check for blockage. If blockage is in the tube, remove with a coat hanger.

If tube is not blocked, look into fan housing. Remove debris with long-nose pliers, a screwdriver or coat hanger. To reassemble, check O-ring on tube, and replace if damaged. Replace tube by first lining up slot at base of tube with tab inside fan housing.

Insert tube and push down until the tube is seated. Make sure O-ring is in place against fan housing opening. Replace and tighten collar until

collar locking tabs are locked in place. Reattach bag spring. Close Outer bag lower cover with Velcro®.

Many times blockage occurs due to a full dust bag causing dirt to back down the air flow system. When that happens, the blockage will be at the top of the system, starting in the area where the dust bag connects to the connector assembly. Note: If the above actions do not correct the problem, contact an Oreck authorized service center or call the customer service center. US: 1-800-989-3535 Canada: 1-888-676-7325

Velcro® is a registered trademark owned by Velcro Industries B.V. Limited Liability Company Netherlands.

28 29 30 32 33

E N G L I S H

Trouble-

shooting

Service problems that

appear to be major can

often be solved easily.

You can be your own

troubleshooter by

reviewing this guide.

All other servicing

should be done by an

Oreck authorized

service center.

Parts

What to doProblem Check

Cleaner will not run.

Cleaner does not pick up.

Unit still does not operate properly.

All accessories and replacement parts are sold separately. To order, call our customer service group or visit our website. Please have your model number from the data label on the bottom of the unit.

Accessories

• Not plugged in properly.

• No electricity in wall outlet.

• Filter Bag is full.

• Nozzle or intake

pivot clogged.

• Belt is broken or stretched.

• Brush is worn.

• Bag tube clogged.

• Bag pores are clogged

with fine dust.

• Impeller fan is broken

• Revolving brush is not

even at both ends.

• Check all the above points.

• Be sure cleaner is firmly plugged into wall outlet.

• Check electrical source – fuse or circuit breaker.

• Replace filter bag. See “Replacing Disposable

Odor Fighting Dust Bag”.

• Clear obstruction.

• Replace belt.

• See “Adjusting or Replacing Brushroll”.

• Clear obstruction.

• Change bag.

• Return to Service Center for repair.

• Check bearing seal. Make sure words

“Special” or “Normal” at each end.

• Contact Oreck for service.

Part NumberItem

Crystal Aroma® Carpet and Room Freshener AROMAII

Oreck Dry Carpet® Cleaning System 303110S

Replacement Parts

Part NumberItem

Dust Bag, 8 Pack, Saniseal® Odor Fighting Hypo-Allergenic CCPK8OF

Belts, 3 Pack 0300604

Customer Service Hotline USA: 1-800-989-3535 Canada: 1-888-676-7325 website: www.oreck.com

Warranty

Total Cleaning System

E N G L I S H

ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally purchased for residential use, not resale, from Oreck or an Oreck Authorized Retail Dealer.)

Oreck will repair or replace, free of charge, to the original purchaser, any part that is found to be defective in material or workmanship within ten (10) years of the date of purchase. This limited warranty applies to normal domestic use. Any commercial use of this product will void this limited warranty. This limited warranty covers the revolving roller brush for one (1) year for residential use only.

This limited warranty does not cover the replacement of expendable or consumable parts such as carbon motor brushes, edge brushes, drive belts, brushes, bulbs, disposable bags and other parts subject to normal wear unless they are defective in material or workmanship.

This limited warranty does not apply to any part subjected to accident, abuse, commercial use, alteration, misuse, damage caused by act of God, the use of voltages other than indicated on the serial number displayed on this product or service of this product by other than Oreck or a participating Factory Authorized Service Center. Oreck does not authorize any person or representative to assume or grant any other warranty obligation with the sale of this product.

Oreck’s limited warranty is valid only if you retain proof of purchase from Oreck or an Oreck Authorized Retail Dealer for this product. If you purchase this product from any other source, your purchase is “AS IS,” which means Oreck grants you no warranty, and that you, not Oreck, assume the entire risk of the quality and performance of this product, including the entire cost of any necessary servicing or repairs of any defects.

Oreck’s liability for damages to you for any costs whatsoever arising out of this statement of limited warranty shall be limited to the amount paid for this product at the time of original purchase, and Oreck shall not be liable for any direct, indirect, consequential or incidental damages arising out of the use or inability to use this product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD, AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.

Some states do not allow limitations on the duration of implied warranties, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. If appropriate, see additional information for extended warranty.

+ 19 hidden pages