AL-4146-2L SERIES
>
AL-4146-2L
Local Control Unit (LCU), Wired
➊ APPLICATIONS
• General Purpose Positioning
Subsystems
➋ PRODUCT HIGHTLIGHTS
• Sequential Axis Control
• Compatible with AL-48062,
AL-48063, AL-4160 Series,
AL-4100 Series
AL-4146-2L-12A
The AL-4146-2L series LCUs are portable, hand-held units that are connected to
a PCU/positioner controller via an interconnect cable. These LCUs utilize the PCU/positioner
controller’s basic control, limit and supply circuits. They incorporate a rotary switch for axis
selection, limit indicators, and a potentiometer for speed and direction control.
• When the LCU is connected and operating in LOCAL mode, the PCU/positioner controller front panel
operation is disabled.
• When the LCU is placed in REMOTE mode, PCU/positioner controller obtains priority control.
Note: LCU cable purchased separately. Custom lengths available.
Series Overview
Model AL-4146-2L AL-4146-2L-12A
Number of Axes Up to 6 Up to 12
22
Product specifi cations and descriptions in this document are subject to change without notice.
Actual products may differ in appearance from images shown.
© ORBIT/FR 2010
front panel
supplied accessories
>
All Models:
Local/Remote (LCU/Controller)
Axis Select
Coarse/Fine Speed
Speed/Direction Control
Limit Indicators
Momentary Run Switch (Deadman)
>
AL-4146-2L-12A Model:
Selected Controller Indicators
Emergency Stop (E-Stop)
technical notes
This product is rated for indoor use and limited outdoor
use. Outdoor storage requires a protective enclosure.
AL-4146-2L-12A requires a junction box for multiple
controller applications (consult your local factory sales
representative for more information).
>
CD-ROM Documentation Set:
User Manual (Installation, Setup, Operation)
options
Opt. 101 - Additional Manual Set
Optional Standard } Required
ORDERING INFORMATION
• AL-4146-2L Local Control Unit (LCU), 6 Axis
• AL-4146-2L-12A Local Control Unit (LCU), 12 Axis
Specifi cations - AL-4146-2L Series Local Control Units (LCU), Wired
Model AL-4146-2L AL-4146-2L-12A
Operational
Front Panel Controls
& Indicators
Electrical
Controlled Axes
Compatible Power Control Units
(PCU)
Physical
Dimensions
Weight
Environmental
Operating Temperature
Storage Temperature
Relative Humidity
• Local/Remote (LCU/Controller)
• Local/Remote (LCU/Controller)
• Axis Select
• Coarse/Fine Speed
• Speed/Direction Control
• Limit Indicators
• Momentary Run Switch (Deadman)
6 Sequential control 12 Sequential control
• AL-4100 Series
• AL-48062
• AL-48063
• 3.1 in (7.8 cm) Width
• 6.8 in (17.3 cm) Length
• 2.3 in (5.7 cm) Depth
2 lbs (0.9 kg)
32° to 122° F (0° to 50° C)
- 4° to 167° F (- 20° to 75° C)
90%
• Axis Select
• Coarse/Fine Speed
• Speed/Direction Control
• Limit Indicators
• Momentary Run Switch (Deadman)
• Selected Controller Indicators
• Emergency Stop (Latching Panic Button)
> Positioner Controllers, PCUs & LCUs
Product specifi cations and descriptions in this document are subject to change without notice.
Actual products may differ in appearance from images shown.
© ORBIT/FR 2010
23