Orbit ST 35D.1, ST37A.1 Assembly Manual

.1

.1

.1

1

CONTENT

CONTENT ----------------------------------------------------------------------------------------------------------------------------------1

IMPORTANT SAFETY PRECAUTIONS --------------------------------------------------------------------------------------2

ASSEMBLY INSTRUCTIONS ---------------------------------------------------------------------------------------------------3-5

FOLDING & UNFOLDING INSTRUCTIONS --------------------------------------------------------------------------------6

GROUNDING METHODS -----------------------------------------------------------------------------------------------------------7

OPERATION GUIDE ---------------------------------------------------------------------------------------------------------------8-15

GETTING STARTED GUIDE -----------------------------------------------------------------------------------------------------16

SAFETY EXERCISES ---------------------------------------------------------------------------------------------------------------17

WARM-UP EXERCISES ------------------------------------------------------------------------------------------------------------18

MAINTENANCE INSTRUCTIONS ---------------------------------------------------------------------------------------------19

BELT ADJUSTMENT ----------------------------------------------------------------------------------------------------------------20

EXPLODED DRAWING -------------------------------------------------------------------------------------------------------------21

PARTS LIST -------------------------------------------------------------------------------------------------------------------------22-23

ERROR CODE AND TROUBLE SHOOTING -----------------------------------------------------------------------------24

2

IMPORTANT SAFETY PRECAUTIONS

WAR NING: Before starting any exercise program, consult your physician or health professional，

especially for person who is above 35 years old or had some health problems before. Neither manufacturer

nor distributor should be held responsible for any injuries or discomfort by the user due to above reasons.

Don't plug in power until you finish assembling the treadmill.

ATTENTIONS:

1. When using this treadmill, attach the safety key pull pin to your clothes or belt.

2. Do not plug anything into any parts of this treadmill, or it may cause damage.

3. Position treadmill on a clean, level surface. Do not place the treadmill on thick carpet as it may interfere

with proper ventilation. Whereby necessary, use a rubber or PVC treadmill mat. Do not place treadmill near

water or outdoors, moisture will cause damage to electronics.

4. Do not start the treadmill while standing on the walking belt. After turning the power on and adjusting the

speed control, there may be a few seconds before the walking belt begins to move, always stand on the foot

rails on the sides of the frame until the belt is moving. Hold onto handrails when initially start walking or

running on the treadmill, let go until you are comfortable with its speed.

5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing that

could be caught in the treadmill. Always wear running or aerobic shoes with rubber soles.

6. Keep small children and pets away from the treadmill while switched on.

7. This treadmill is designed for adult use, children intent to use the treadmill must have adult supervision.

8.The power cord of motorized treadmill is specialized for its purpose. Do not attempt to modify or repair it

yourself. Do not place heavy object on power cord or leave it near high temperature, only plug it into well

earthed power point. If it is damaged, please purchase new from distributor or contact our company

directly.

9. If case of an electrical failure or safety key being pulled from its pot during exercise, this treadmill may

come to a stop in 3-4 seconds. Hold onto hand rail until it completely stops and step down through the side

foot rails. Do not attempt to jump off the treadmill while it’s still in motion.

10. When the treadmill is not being used, unplug power cord and remove safety pull pin. Keep them in safe

place and do not use them for other purpose.

11. This treadmill is designed for home use only with maximum user weight 110kg. It is improper to put it into

a corporate or commercial environment and it won’t be covered by its domestic warranty.

3

WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW PARTS:

Main frame
1set

D21 Washer M10
8 PCS

D8 Round head hex bolt
M10*15
4 PCS

C13 Safety key
1 PC

D2 Allen wrench 6mm
1 PC

C32 Chest belt
1PC

D1 Screw dirver
1 PC

D12 Round head hex
bolt M10*55
4 PCS

B11L Left side cover
1 PC

B11R Right side cover
1PC

D48 Cross self-tapping
bolt ST4.2*19, washer
6 PCS

C15 Power cable
1 PC

C19 MP3 cable
1 PC

B49 Bottle holder
2 PCS

NOTE: Do Not Tighten Bolts At Once.

4

STEP 1：Follow the below diagram to lift up the computer bracket. Be careful not to cut, jam

and damage cables inside the frame tubes when folding up.

STEP 2: Use bolt M10*55 (D12) and flat washer M10 (D21) to tighten bottom uprights, and

fix console/handrail bracket with bolt M10*15 (D8) and flat washer M10 (D21).

D21

D8

D8

D21

5

Step 3: Tighten left/right side covers (B11L/R) with cross self-tapping bolt ST4.2*19,

washer (D48).

Step 4: Place on bottle holders (B49), safety key (C13), MP3 cable (C19), and power cable

(C15).

ATTENTION: Check that all nuts and bolts are tightened before using the treadmill. Please

read the below instructions carefully.

6

Lift up the machine and apply force to

push up until you hear "click" from the latch,

which indicates that locking mechanism is

engaged.

Use foot to press the latch lightly until the

cylinder disengages and treadmill deck

starts folding down. Hold onto the deck to

support the fold down until you are in safe

space to the drop. Let go and the deck will

drop slowly (soft drop) until it reaches

ground.

Unfolding instruction

Folding instruction

7

This treadmill must be grounded properly. It is equipped with a cord connecting to an

equipment-grounding conductor and a grounding plug. The 3 pin plug must be plugged into

an appropriate power outlet that complies with industrial codes and local requirements in

relate to grounding.

DANGER – Improper connection of the equipment-grounding conductor can result in risk of

electric shock. Check with a qualified electrician or serviceman if you are in doubt as to

whether the product is properly grounded. Do not modify the plug provided with the product.

If it does not fit the power outlet, please have a proper outlet installed by a qualified

electrician. No adapter should be used with this product.

Grounding methods