Orbit OEB3001 Owner's Manual

01

Assembly

Your bike will require a small amount of assembly.

You will find everything you need included in the box.

02

Get to know your bike

Take time to get to know your new bike – it will help you

03

Replacement parts

Thank you for purchasing our product. Although we go to great to ensure the quality of our products.
Occasionally errors or missions occur. Should you find either a defective or missing part in this product. Please
contact us . Please provide the Model Number and the Part Number when requesting parts. Thank you.

Telephone no.: 08-94444055
E-mail: [e-mail]

01

Assembly

PRECAUTIONS

WARNING: This bicycle has been designed and constructed to provide maximum safety. Nevertheless, certain
precautions should be taken when using exercise equipment. Read the whole manual before assembling and using
the bicycle. The following safety precautions should also be observed:

1. Before using the exercise bike, please read all instructions in this manual.

2. It is the responsibility of the owner to ensure that all users of the bike are adequately informed
of all precautions. Use the exercise bike only as described in this manual.

3. Use the bike indoors on a level surface and keep it away from moisture and dust. Place a mat
under the stabilizers to protect the carpet or floor.

4. Inspect and tighten all parts regularly. Replace any worm parts immediately

5. Keep children away from this equipment at all times. DO NOT leave them unsupervised in the room where this

bicycle is kept.

6. Wear appropriate exercise clothing when using the bike. Do not wear loose clothing that could

become caught in the bike.

7. If you feel pain or dizziness while exercising, stop immediately and cool down.

8. The pulse sensor is not a medical device. Various factors including the user’s movement, may

affect the accuracy of the heart rate readings. The Pulse sensor is intended only as an exercise
aid in determining heart rate rends in general.

9. The bike is intended for commercial use.

Pre-assembly notes

OPEN THE BOXES

Make sure all parts on the manual are included in the carton. Check The Hardware Chart
for a full count of the number of parts included for proper assembly.

GATHER YOUR TOOLS

Before starting the assembly of your unit, gather the necessary tools. Having all of the equipment at hand
will save time and make the assembly quick and hassle-free.

CLEAR YOUR WORK AREA

Make sure that you have cleared away a large enough space to properly
assemble the unit. Make sure the space is free from anything that may cause
injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.

Hardware chart

W ren ch -1 3/1 5m m(1 )

A lle n K ey -6m m (1 )

S cr e w d riv er (1 )

A llen B olt M8 xP1 .25 x1 6L (4 )

S cre w M 3 *3 0L (3 )

Sp rin g W as her

Φ7

*2T (2 )

F la t W as he r?8*?19 *2 T (4 )

A lle n B o lt M 7*P 1. 0* 30 L( 2)

S CR EW S M 5* P 0. 8*1 0L (1 1)

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Wrench-13/1 5 mm(1)

Allen Key-6 mm (1 )

Screwdriver (1)

Allen Bolt M8 xP 1.2 5 x1 6 L (4)

Screw M 3*30L(3)

Spring Washer

Φ7

*2T(2)

Flat Washerф8*ф19*2T(4)

Allen Bo lt M7*P1.0 * 30L(2)

SCREW S M5*P0.8* 1 0 L (11)

01

Assembly

Part list

NO DESCRIPTION QTY

BOM NUMBRE

A

COMPUTER

1 PCS PE-SG76810027102

A-1

ADJUSTABLE COMPUTER BRACKET

1 PCS PH-T-PB-326-1000

A-2

SCREW M5x10L

12 PCS PD-SWM60510-1042

B

H SHAPE HANDLEBAR

1 PCS PH-T-PB-425-1000

B-1

HAND PULSE WIRE WITH BODY FAT

2 PCS PE-B23-0750-1002

B-2

HAND PULSE SENSOR FOR BODY FAT(UPPER)

2 PCS PL-T-PB-445-1080

B-3

HAND PULSE SENSOR (LOWER)

2 PCS PL-T-PB-447-1080

B-4

HAND PULSE HOLDER

4 PCS PH-T-PB-242C1000

B-5

SCREW M3xP0.5x12L

4 PCS PD-SGM20312-1041

C

HANDLEBAR POST

1 PCS MTEB3000FW027005

C-1

LEFT PROTECT COVER

1 PCS PLEB1000-10-1080

C-2

RIGHT PROTECT COVER

1 PCS PLEB1000-11-1080

C-3

UPPER PROTECT COVER

1 PCS PLEB1000-12-1080

C-4

SEMI CIRCLE WASHER φ8xφ19x2t

2 PCS PD-WA220819-1082

C-5

FLAT WASHER φ8xφ19x2t

4 PCS PD-WN230819-1082

C-6

HEXANGULAR SCREW M8*P1.25*16L

6 PCS PD-SRM30816-1182

C-7

HAND PULSE WIRE (UPPER)

1 PCS PE-C31-0600-1000

C-8

UPPER COMPUTER CABLE

1 PCS PE-C27-0550-1000

D

FRAME

1

PCS MTEB3000FW117005

D-1

BEARING

2

PCS PH-BA2-6004-1005

D-2

END CAP FOR STABILIZER

4

PCS PLEB1000-04-1080

D-3

HEXANGULAR NUT M16*P1.5

4

PCS PD-NHI61600-1042

D-4

ADJUSTOR FOR STABILIZER

4

PCS PLEB1000-08-1002

D-5

CONTROL BOARD

1

PCS 1PB-LGPS-7.1V-A01

D-6

HEXANGULAR SCREW M8xP1.25x25L

8

PCS PD-SRM30820-1182

D-7L

FRONT COVER LEFT

1

PCS PLEB3000-01-10D0

D-7R

FRONT COVER RIGHT

1

PCS PLEB3000-02-10D0

D-8

COVER FOR CRANK

2

PCS PLEB1000-07-1185

D-9L

LEFT CRANK ARM WITH COVER

1

PCS PH-T-PB-279-1000

D-9R

RIGHT CRANK ARM WITH COVER

1

PCS PH-T-PB-280-1000

D-10

PEDAL(L/R)

1

SET PS-T-PB-433-1080

D-11L

REAR COVER LEFT

1

PCS PLEB3000-04-10D0

D-11R

REAR COVER RIGHT

1

PCS PLEB3000-03-10D0

D-12

DECORTION COVER FOR MAINHOUSING

2

PCS PLEB2000-03-1080

D-13

COVER FOR BASE TUBE

1

PCS PLEB3000-09-1080

D-14

CROSS SCREW M4x50L

11

PCS PD-SBM20450-1041

D-15

CONE CROSS SCREW M5xP0.8x14L

15

PCS PD-SWM20514-1141

D-16

SLIDER POST FOR SADDLE

1

PCS MH-T-PB-253-2000

D-17

COMPUTER CABLE LOWER

1

PCS PE-C26-0950-1000

D-18

HAND PULSE WIRE LOWER

1

PCS PE-C31-2900-1000

D-19

SEMI CIRCLE WASHER φ8xφ19x2t

8

PCS PD-WA220819-1082

D-20

NYLON NUT M8*8t

8

PCS PD-NNM60801-1042

D-21

NYLON SCREW M8xP1.0x20L

2

PCS PD-SEM10820-7601

Part list

NO DESCRIPTION QTY

BOM NUMBRE

D-22 SENSOR BOX 1 PCS PE-P-PB3715-1000

D-23 SENSOR HOLDER 1 PCS PE-P-PB4310-1000

D-24 SCREW 3 PCS PD-SDM20410-1041

D-25 CLAMP 1 PCS PH-T-PB-274C1000

D-26 UPPER COVER FOR BATTERY 1 PCS PL-P-PB4201-10R1

D-27 BATTERY 1 PCS PE-T-PB-453C1000

D-28 LOWER COVER FOR BATTERY 1 PCS PL-P-PB4200-10R1

E

HOLDER FOR SLIDER POST

1

PCS PH-T-PB-243-1000

E-1

BACK REST

1

PCS PS-T-PB-272-1002

E-2

SEAT

1

PCS PS-T-PB-416-1002

E-3

SEAT SUPPORT FRAME

1

PCS MTEB3000FW057005

E-4

MAGAZINE RACK

1

PCS PL-SUF755R251102

E-5

SEAT HANDLEBAR

1

PCS MTEB3000FW067005

E-6

FORM GRIP

2

PCS PL-T-PB-358-1002

E-7

COVER FOR SEAT HANDLBAR

1

PCS PLEB3000-20-1080

E-8

HAND PULSE HOLDER

4

PCS PE-P-PB3428-1000

E-9

CONNECTION BOARD

1

PCS PE-T-PB-338-1000

E-10

RIGHT COVER FOR SLIDER POST

1

PCS PLEB3000-05-1080

E-11

SPRING SOCKET FOR ADJUSTMENT

1

PCS PH-T-PB-246-1000

E-12

TENSION CABLE

1

PCS PH-T-PB-264-1000

E-13

FLAT WASHER φ6xφ13x1t

1

PCS PD-WN120613-1041

E-14

CLAMP

1

PCS PH-T-PB-247-1000

E-15

ROUND HEXANGULAR SCREW M6*55L

1

PCS PD-SOM30655-1082

E-16

KNOB FOR SEAT ADJUSTMENT

1

PCS PLEB3000-14-1000

E-17

TURNER

1

PCS PLEB3000-16-1000

E-18

NYLON NUT M8*8t

1

PCS PD-NNM20801-1041

E-19

PULLING POLE

1

PCS PH-T-PB-285-1000

E-20

FIXING DECK

1

PCS PLEB3000-15-1080

E-21

HANDLE FOR SLIDER

1

PCS PLEB3000-11-1000

E-22

BUSHING ф6*10L

2

PCS PH-T-PB-327-1000

E-23

HEXANGULAR SCREW M6*P1.0x55L

1

PCS PD-SPM20655-1041

E-24

HANDLE DECK FOR SLIDER

1

PCS PLEB3000-10-1080

E-25

FIXING CHIP FOR HANDLE

1

PCS PLEB3000-13-1080

E-26

SCREW M8*P1.25*16L

14

PCS PD-SRM30816-1182

E-27

SCREW M10x20L

2

PCS PH-P-PB1913-1082

E-28

FLAT WASHER φ8xφ19x2t

14

PCS PD-WN230819-1082

E-29

IDLER WHEEL FOR SLIDER

4

PCS PL-T-PB-278-1000

E-30

HEXANGULAR SCREW

4

PCS PD-SHI31235-1082

E-31

BUSHING

4

PCS PH-P-PA-009-1000

E-32

FLAT WAHSERφ10.5xφ17x2t

8

PCS PD-WN211017-1041

E-33

NYLON NUT

4

PCS PD-NNI21200-1041

E-34

LEFT COVER FOR SLIDER

1

PCS PLEB3000-06-1080