Orange CRUSH ACOUSTIC 30 Owner`s Manual
CRUSH ACOUSTIC 30
ACOUSTIC GUITAR AMPLIFIER COMBO
IMPORTANT SAFETY INSTRUCTIONS
1
Read these instructions.
2
Keep these instructions.
3
Heed all warnings.
4
Follow all instructions.
5
Do not use this apparatus near water.
6
Clean only with a dry cloth.
7
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9
Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11
Only use attachments/accessories specified by the manufacturer.
12
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13
Unplug this apparatus during lightning storms or when unused for long periods of time.
14
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
DESIGNED AND ENGI NEERED BY ORA NGE MUSIC ELECTRONIC COMPAN Y LTD.
108 RI PON WAY, BOREH AM WOOD, WD6 2JA, UK. ORANGEAMPS.COM
The exclamation point within an
equilateral triangle and "WARNING"
are intended to alert the user to the
presence of important operating or
servicing instructions. Failure to
heed the instructions can result in
severe injury or death.
This equipment should be used
under the supervision of an adult
To reduce the risk of fire and electric
shock do not expose this apparatus
to rain or moisture. Do not use in
damp environments, e.g. bathrooms
at all times.
etc.
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of
un-insulated ‘dangerous voltage’
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
Do not place objects containing
liquids on, or near the product.
Do not operate this apparatus or
connect/disconnect a power plug
persons.
whilst hands are wet.
The “Caution, hot surface” symbol
indicates that the marked item may
Ensure the apparatus is installed
with plenty of space around the
unit (> 6”/12.5cm) as this apparatus
may generate heat under normal
use. This equipment is not intended
to be used on soft support (like
beddings, blankets etc.). This
equipment should always be placed
Do not attempt to gain access to
the interior of the product. No user
serviceable parts inside. Refer all
servicing to qualified servicing
be hot.
on a flat, stable surface.
personnel.
This symbol indicates this product is classified as Waste Electrical and Electronic Equipment
(WEEE) in the European Union and should not be discarded with household waste. Contact
your local authority for more information and details of your nearest approved disposal facility.
3
TOP PANEL
The top panel of the Crush Acoustic 30 is divided into 4 sections.
indicated by the following icons.
Global Channel 1 Channel 2 Effec ts
AUX
For use with MP3 players, laptops etc. via a 3.5mm audio
cable. The audio signal is internally summed to mono.
CHANNEL 1 - GUITAR
1/4” jack input – 1/4” instrument jack socket
CHANNEL 2 - MIC
Jack/XLR combi input
Adjust s the lower frequency
BASS
response. Increasing the Bass
produces deeper sounds.
TREBLE
Adjust s the high frequency response.
Increase the Treble for brighter tones or
reduce for a warmer sound.
COLOUR
Changes the voicing of Channel 1.
When engaged, it will boost presence and
slightly cut midrange frequencies.
Adjust s the midrange response.
Increasing the mids creates a fatter
sound , whilst reducing ‘scoops’ the tone.
Adjust s the lower frequency
response. Increasing the Bass
produces deeper sounds.
GAIN
MID
Controls the gain level (volume) of the
Channel 1. When set to minimum ,
no sound will be heard.
Adjust s the high frequency response.
Increase the Treble for brighter tones or
reduce for a warmer sound.
PAD
Reduces the input signal by 10d B,
maintaining a clean signal with higher
4 5
output instruments.
BASS
TREBLE
MIC/LINE
Selects between instrument/line level
signals from the jack input and mic level
signals from the XLR input.
Controls the gain level (volume) of the
GAIN
Channel 2. When set to minimum ,
no sound will be heard.
PHANTOM POWER
Activates phantom power when using
a condenser microphone (check
manufacturer specifications).
Loading...