Optris CTvideo 1M, CTvideo 2M Specifications
innovative infrared technology
CTvideo 1M/2M
Precise non-contact temperature measurement
of metals and ceramics from 250 °C to 2200 °C
(482 °F to 3992 °F) with adjustable focus,
patented crosshair laser and video sighting
optris
®
CTvideo 1M/2M
TECHNICAL DATA
Features:
• Parallel use of video sighting and crosshair laser
for easy sensor alignment (measuring spots up
from 0.5 mm (0.02 in) under all viewing conditions
possible
• Manual focusing for measurement distances
from 90 mm (3.5 in)
• Response times up from 1 ms
• Usable in up to 70 °C (158 °F) ambient temperature without
cooling and automatic laser switch o at 50 °C (122 °F)
• Short measuring wavelengths of 1.0 μm or 1.6 μm
decrease measuring mistakes on surfaces with low or
unknown emission rate
• Compact Connect software for fast on-site sensor setup
and video alignment or real-time process monitoring
General specications
Environmental rating IP 65 (NEMA-4)
Ambient temperature –20 °C to 70 °C (50 °C with laser ON)
(–4°F to 158 °F (122 °F with laser ON)
Storage temperature –40 °C to 85 °C (–40 °F to 185 °F)
Relative humidity 10 – 95 %, non-condensing
Vibration IEC 68-2-6: 3 G, 11 – 200 Hz, any axis
Shock IEC 68-2-27: 50 G, 11 ms, any axis
Measurement specications
Temperature range
(scalable via software)
Spectral range 1.0 μm (1M) / 1.6 μm (2M)
Optical resolution
(90 % energy)
System accuracy
(at T
= 23 ± 5 °C
amb
[at
= 73 ±9 °F])
Tamb
Repeatability
(at T
= 23 ± 5 °C
amb
[at
= 73 ±9 °F])
Tamb
Temperature resolution 0.1 K (1ML, 2ML)
Exposure time
Emissivity / Gain
(adjustable via software)
IR window correction
(adjustable via software)
Signal processing
(parameter adjustable
via software)
Software (incl.) optris
1)
2)
485 °C ... 1050 °C (905 °F ... 1922 °F) (1ML)
650 °C ... 1800 °C (1202 °F ... 3272 °F) (1MH)
800 °C ... 2200 °C (1472 °F ... 3992 °F) (1MH1)
250 °C ... 800 °C (482 °F ... 1472 °F) (2ML)
385 °C ... 1600 °C (725 °F ... 2912 °F) (2MH)
490 °C ... 2000 °C (914 °F ... 3632 °F) (2MH1)
150:1 (1ML, 2ML)
300:1 (1MH, 1MH1, 2MH, 2MH1)
± (0.3 % of reading + 2 °C)
± (0.3 % of reading + 36 °F)
± (0.1 % of reading + 1 °C)
± (0.1 % of reading + 34 °F)
0.1 K (1MH, 1MH1, 2MH, 2MH1)
1 ms (90 %)
0.100 – 1.100
0.100 – 1.000
Peak hold, valley hold, average;
extended hold function with
threshold and hysteresis
®
Compact Connect
(Sensor setup, video sighting and
process monitoring)
Weight 600 g (21.2 oz) (sensing head)
420 g (14.8 oz) (electronics)
Electrical specications
Output / analog 0/4 – 20 mA, 0-5/10 V, thermocouple J, K
Alarm output 24 V/50 mA (open collector)
Output / digital USB 2.0
Video sighting Digital (USB 2.0), 640 x 480 px,
Output impedances mA max. 500 Ω (with 8-36 V DC)
Inputs Programmable functional inputs for external emissivity
Cable length
(sensor + elecronics)
Cable length (USB) 5 m, extendable up to 100 m over Ethernet
Current draw (laser) max. 160 mA
Power supply
Laser 635 nm
1)
Ɛ = 1, response time 1 s
2)
With dynamic adaptation at low signal levels
3)
The functioning of the LCD display may be limited in ambient temperatures
below 0 °C.
Ethernet (via optional USB server)
FOV 3.1° x 2.4°
mV min. 100 kΩ load impedance, thermocouple 20 Ω
adjustment, ambient temperature compensation,
trigger (reset of hold functions)
3 m (standard), 5 m, 10 m
(9.8 ft [standard], 16.4 ft, 32.8 ft)
(16.4 ft, expandable up to 328.1 ft over Ethernet)
8
–
36 V DC
1 mW, ON/OFF via electronic box or software
Loading...