Optoway TRSL-7380W-CXX0 Technical data
Optoway
Wavelength
查询TRSL-7380W-CXX0供应商
********************************************************************************************************************************************************************************
TRSL-7380W-CXX0
TRSL-7380W-CXX0
3.3V / CWDM / 1.25 Gbps SFF LC 2X10 SINGLE-MODE TRANSCEIVER
*******************************************************************************************************************************************************************************
FEATURES
l Duplex LC Single Mode Transceiver
l Compliant with IEEE 802.3z 1000BASE
l Compliant with Fiber Channel 1X SM-LC-L FC-PI
l Small Form Factor, RJ-45 size, 2X10 pin Package
l 18-Wavelength CWDM DFB LD Transmitter from
1270 nm to 1610 nm, with step 20 nm
l 24 dB Link Power Budget at Least
l Analog Monitor Function
-- Transmitter Laser Bias Current
-- Transmitter Laser Optical Power Monitor
-- Receiver Photo Detector Current
l AC/AC Coupled Signal Input / Output
l LVTTL Transmitter Disable Input
l LVTTL Signal Detection Output
l Single +3.3 V Power Supply
l 0 to 70oC Operation
l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825
Compliant
APPLICATIONS
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l XDSL Applications
DESCRIPTION
The TRSL-7380W-CXX0 series single mode transceivers
is small form factor, low power, high performance module
for bi-directional serial optical data communications such
as IEEE 802.3z Gigabit Ethernet 1000BASE-LX and Fiber
Channel 1X SM-LC-L FC-PI. There are eighteen center
wavelengths available from 1270 nm to 1610 nm. A
guaranteed minimum optical link budget of 24 dB is
offered. The transmitter section uses a multiple quantum
well 1550 nm DFB laser and is a class 1 laser compliant
according to International Safety Standard IEC-60825. The
receiver section uses an integrated InGaAs detector
preamplifier (IDP) mounted in an optical header and a
limiting post-amplifier IC. A LVPECL logic interface
simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
ORDER INFORMATION
P/No. Bit Rate
(Gb/s)
TRSL-7380W-CXX0 1.25/1.063 ZX > 24 CWDM* 2X10 LC 0 to 70
CWDM Wavelength (0 to 70oC)
Central
Wavelength
-C270 1264.5 1270 1277.5 -C450 1444.5 1450 1457.5
-C290 1284.5 1290 1297.5 -C470 1464.5 1470 1477.5
-C310 1304.5 1310 1317.5 -C490 1484.5 1490 1497.5
-C330 1324.5 1330 1337.5 -C510 1504.5 1510 1517.5
-C350 1344.5 1350 1357.5 -C530 1524.5 1530 1537.5
-C370 1364.5 1370 1377.5 -C550 1544.5 1550 1557.5
-C390 1384.5 1390 1397.5 -C570 1564.5 1570 1577.5
-C410 1404.5 1410 1417.5 -C590 1584.5 1590 1597.5
-C430 1424.5 1430 1437.5 -C610 1604.5 1610 1617.5
CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
Min.
(nm)
1000
BASE
Typ.
(nm)
Power
Budget
(dB)
Max.
(nm)
(nm)
Wavelength
Package Temp.
Central
(oC)
Min.
(nm)
TX Power
(dBm)
5 to 0 -24 LVTTL
RX Sens.
(dBm)
Typ.
(nm)
Signal
Detect
Max.
(nm)
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
Optoway
***************************************************************************************************************************************************************************
TRSL-7380W-CXX0
Absolute Maximum Ratings
Parameter Symbol Min Max Units Notes
Storage Temperature Tstg -40 85
Operating Temperature Topr 0 70
Soldering Temperature --- 260
Power Supply Voltage Vcc 0 4.5 V
Input Voltage --- GND Vcc V
Output Current Iout 0 30 mA
o
C
o
C Wit air flow 1m/sec
o
C 10 seconds on leads only
Recommended Operating Conditions
Parameter Symbol Min Typ Max Units / Notes
Power Supply Voltage Vcc 3.1 3.3 3.5 V
Operating Temperature Topr 0 70
Data Rate 1000 1250 Mb/s
200 300 mA
o
C / air flow 1m/sec
Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V)
Parameter Symbol Min Typ Max Units Notes
Optical
Optical Transmit Power Po 0 --- 5 dBm 1
Output Center Wavelength
Output Spectrum Width
Side Mode Suppression Ratio SMSR 30 dB
Extinction Ratio ER 9 --- --- dB
Output Eye Compliant with IEEE 802.3z
Optical Rise Time tr 0.26 ns 20% to 80% Values
Optical Fall Time tf 0.26 ns 20% to 80% Values
Relative Intensity Noise RIN -120 dB/Hz
Total Jitter TJ 0.227 ns 3
Electrical
Data Input Current – Low IIL -350 µA
Data Input Current – High IIH 350 µA
Differential Input Voltage VIH - VIL 300 mV
Data Input Voltage – Low VIL - VCC -2.0 -1.58 V 4
Data Input Voltage -- High VIH - VCC -1.1 -0.74 V 4
Disable Input Voltage -- Low V
Disable Input Voltage -- High V
Shut Off Time for TxDis t
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm.
3. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
4. These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs.
λ
∆λ
0 0.5 V TX Output Enabled
TDIS,L
Vcc – 1.3
TDIS,H
1 ms
DIS
λ-5.5
--- --- 1 nm -20 dB Width
λ
Vcc V TX Ouput Disabled
λ+7.5 nm 2
*****************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC.
Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 6/30/2004 V2.0
No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Loading...