ZH400UST
Superb for signage
20,000 hours maintenance-free laser light source at full brightness**
Dust resistant – Independently tested, IP5X certification for total reliability
4000 lumens 1080p ultra short throw projector
Versatile installation - Portrait and downward projection
ZH400UST
The ZH400UST is powered by long-lasting, low maintenance DuraCore laser light source. The lamp-less and filter-free design vastly reduces
running costs for a low total cost of ownership.
Weighing only 5.6kg, this projector can be mounted just centimetres away from a wall or surface and can project an image size of over 100 inches
(254cm).
Supporting 24/7 operation and versatile orientation, the ZH400UST is a flexible, powerful and bright ultra short throw projector which makes for a
superb signage solution where space or accessibility can be limited, such as shop windows or retail displays.
DuraCore
Industry leading lifetime is achieved using
Optoma’s DuraCore technology. Implementing
advanced laser diode cooling techniques and an
innovative dust resistant design. 20,000 hours
provides a staggering 13 years of normal use*1
or 2.2 years if run continuously 24/7.
*16 hours per day, 250 days per year
Museums, exhibitions and visitor centres
Eye-catching content and bright lifelike images guarantee to engage
and capture the interest of an audience at any visitor or entertainment
venue. The lightweight and dynamic ZH400UST satisfies the
requirements for a dependable signage solution. Supporting portrait
mode, rear and downward projection, this UST projector offers
complete flexibility for any professional installation.
Retail displays and digital signage
The ultra-high 100,000:1 contrast ratio ensures no detail is lost which
is key for punchy corporate presentations, retail signage and
projection mapping where every detail matters. The 4000 lumen light
source delivers exceptional consistent brightness, rendering vibrant
images, even in high levels of ambient light. Large images with a
diagonal measurement of 100 inches (254cm) can be accomplished
from a throw distance of just 31cm.
Classrooms
The DuraCore laser light engine replaces the traditional lamp based
projector removing the need for replacement lamps, maintaining low
running costs. Unlike lamp based projectors, the DuraCore laser
supports instant power on/off. The efficiency of the laser helps the
projector run more quietly with lower energy consumption and heat
dissipation.
Control Rooms
High resolution and high contrast make this model suitable for
installation in control rooms where fine lines and small text must
demonstrate pixel perfect precision.
Simulators
Industrial grade simulators for aircraft, track cars and commercial
vehicles demand ultra-high resolution projectors capable of
maintaining high consistent brightness levels. Simulators can now be
implemented using fewer projectors, reducing overall complexity in
terms of hardware. Thanks to the native 1920 x 1080 resolution, even
complex, computer generated images can be displayed with
remarkable clarity.
Engineering and Design
CAD environments, architecture and 3D modelling all require
projected images with absolute clarity and accuracy. The projector is
fully 3D compatible, and can be used in conjunction with active
shutter glasses to generate convincing 3D visuals.
Ultra short throw lens
High quality UST lens delivers large images from a short projection
distance. Presenter dazzle and image shadows are avoided.
Exemplary service
A huge range of service centres across Europe and extensive
warranty and servicing packages.
Bright, detailed rich in colour images
4000 lumens, Full HD 1080p, 100,000:1 contrast ratio. Wide
coverage of Rec. 709 colour gamut.
Dual HDMI inputs
Project crystal clear images using either of the twin HDMI inputs.
HDMI V1.4a is supported, including MHL on one of the inputs.
Computer and HD video sources are supported, while separate audio
cables are no longer required.
Image quality
Image quality is of paramount importance for every installation
product in the ProScene range. The ZH400UST delivers deep rich
and colourful images whilst maintaining an exceptional high level of
consistent brightness that will captivate and engage any audience.
ProScene uses DLP® technology for its image quality and
unmatched reliability. The reflective nature of DLP® micro-mirror
technology provides highly efficient bright images with great contrast
whilst maintaining precise colour accuracy and natural, real-world
colour reproduction. For demanding professional applications, the
proven reliability of DLP® technology makes it the obvious choice.
Projector security
The projector features a Kensington Lock slot to deter theft, while
password protection prevents unauthorised use.
Dust resistant optical engine
The ZH400UST has been independently tested
and certified with an IP5X dust resistance rating.
Outstanding resistance to dust in combination with
exceptional brightness ensures industry leading
durability; paramount for 24/7 maintenance free
operation in challenging environments; the dust
resistance was tested by an independent
laboratory in accordance with IEC standard 60529 and was certified
with an IP5X rating. The dust resistant filter-free design prevents dust
and dirt from affecting the system, ensuring optimal image quality
with minimal maintenance.
Perfect projection
Misaligned images can be quickly adjusted with vertical keystone
correction.
Audio capabilities
The powerful built in 10W loudspeaker can be used in conjunction
with a microphone, to capture the attention of the audience.
Expensive additional audio hardware and cabling can therefore be
eliminated in smaller meeting rooms.
For larger installations, audio inputs from a computer or video source
can also be handled, allowing the projector to act as an audio
switcher and volume controller, alongside an external audio amplifier
and speakers.
Enlarge your images
The digital zoom feature can be used to increase the magnification of
a particular area, allowing explanation of the projected image in more
detail.
Versatile Installation
Images can be projected in portrait mode,
where the projector is operated on its side, to
produce a tall, thin image. This is perfect for
digital signage applications, particularly in
retail premises.
Global monitoring of all AV
devices
Track projector light source usage
Email alerts and instant
notifications - help desk requests,
service reminders, device failure
or theft
Event scheduling
Total cost of ownership
The total cost of ownership of a projector is not in the purchase cost
but in expensive maintenance and service. ProScene projectors
require very little maintenance; have no user serviceable parts inside
and no filters that require periodic replacement. The result is low cost,
predictable service cycles, enabling planned down time to be
minimised.
Enhanced colour gamut
Superb colour accuracy and powerful colour performance is achieved
because of the wide coverage of Rec. 709 colour gamut typically
associated with DLP® technology.
System integration and control
Multiple projectors can be monitored over the LAN and can also send
an email alert via Crestron RoomView in the event of an error or a
lamp failure. Projector status can be monitored via a web browser,
while Extron IP Link, AMX Device Discovery and PJ-Link protocols
offer remote management of most functions across a network,
keeping you in control wherever you are.
Ultimate control
Cut up to 30% from your energy bills using 24-hour automated power
scheduling to ensure that projectors power off when not in use.
Download Crestron RoomView® Express for free at
www.crestron.com/getroomview
Specification
Display Technology 1 x 0.65" DLP® chip
Native Resolution 1080p 1920 x 1080
Brightness1 (Bright Mode)
4000 ANSI lumens
Contrast 100,000:1
Lamp Life2 Bright
20,000 hours to 50% brightness** ** Full brightness “normal” (100% power) mode, temperature 25°C (hrs)
Throw Ratio 0.25:1
Zoom Type 1.0x fixed
I/O Connectors 2x HDMI V1.4a, 2x VGA, 2x 3.5mm Audio, VGA-out, 3.5mm Audio out, RJ45, RS232, 12v Trigger, Mini USB (service)
Speaker 10W
Audio 10W
Keystone Correction ±15° V, ±15° H
Weight (kg) 5.6
Dimensions (W x D x H) (mm) 382 x 310 x 124mm
Aspect Ratio 16:9 native, 16:10 / 4:3 compatible
Computer Compatibility UXGA, SXGA, WXGA, HD, XGA, SVGA, VGA, Mac
Video Compatibility PAL (B, D, G, H, I, M, N, 576i/p), NTSC (M, 4.43/3.58 MHz, 480i/p), SECAM (B, D, G, K, K1, L) HD (1080i, 720p)
3D Support The 3D features of Optoma projectors can only be used with compatible 3D content. Typical applications include use with 3D
educational or 3D design and modelling systems. 3D television broadcast systems, (SKY in the UK), Blu-ray 3D™ and 3D
games from the Sony® PS3 and Microsoft® Xbox 360 are now supported as part of the HDMI v1.4a specification.
3D Compatibility Side-by-Side:1080i50 / 60, 720p50 / 60
Frame-pack: 1080p24, 720p50 / 60
Over-Under: 1080p24, 720p50 / 60
Horizontal Scan Rate 15.3 - 91.1kHz
Vertical Scan Rate 24 - 85Hz (120Hz for 3D)
Displayable Colours 1.07 billion
Noise Level (Eco mode) 30/ 35dB (Eco/ Bright mode)
Power Supply 100 - 240V, 50 - 60Hz
Lamp Type Laser phosphor
Operating Conditions 5°C - 40°C, 90% max humidity, 3000m max altitude
Security Security bar, Kensington lock, Password protection
Remote Control Yes
Standard Accessories AC mains power cable, VGA cable, USB cable, Quick start guide, User manual (CD)
Optional Accessories Wall mounting bracket, WPS Wireless adaptor
Optional Wireless Yes
360’ Operation No - Downward projection only
Portrait Mode Yes
Warranty 3 Years
RoHS Compliant
Projection method Front, rear, ceiling mount, table top, downward, portrait
Features 1080p resolution, ultra short throw, DuraCore laser
Warranty 5 years/ 12,000hrs (light source) 3 years/12,000hrs (projector)
Colour Guarantee 5 years
Optoma Europe Ltd.
42 Caxton Way, Watford Business Park, Watford, Hertfordshire, UK. WD18 8QZ
www.optoma.co.uk
1
Lamp based projectors brightness and lifetime will vary depending on selected projector mode, environmental conditions and
usage. As is common with all lamp based projectors, brightness will decrease over the lamp lifetime. LED projectors do not
have a replaceable lamp and the brightness does not decay significantly over the product lifetime.
2
Typical lamp life achieved through testing. Will vary according to operational use and environmental conditions
Copyright © 2017, Optoma Europe Limited. Optoma, NuForce and Nu are registered trademarks of Optoma Corporation. Optoma
Europe Limited is the licensee of the registered trademarks. All other product names and company names used herein are for
identification purposes only and may be trademarks or registered trademarks of their respective owners. Errors and omissions
excepted, all specifications are subject to change without notice. DLP®, BrilliantColor™ and the DLP logo are registered trademarks of
Texas Instruments. All images are for representation purposes only and may be simulated. All content on this site is protected by
copyright.
Privacy Terms and conditions
Registered Office: 42 Caxton Way, Watford Business Park, Watford. WD18 8QZ . Registered No. 3399395
28/04/2017 12:19
Loading...