Your Optimus CTR-116 Voice-Activated Cassette Tape Recorder uses the latest in recording technology to make recording easy and convenient. Recording begins when the CTR-116
detects sound and ends when sound subsides, for hands-free
operation. The CTR-116’s microphone is sensitive enough for
the boardroom, a seminar, or a lecture hall.
The CTR-116’s features include:
Voice-Activated (VOX) Recording
— records only when there
is sound so that you c an sa ve pow er and preven t blank sect ion s
of tape.
Upright Style
— lets you view the ca ss ett e deck as it plays and
— you can power the recorder from internal batteries, or from a vehicle’s cigarette-lighter socket or
standard AC power (using the appropriate optional adapter).
We recommend you record the CTR-116’s serial number here.
The number is in the recorder’s battery compartment.
You can operate your CTR-116 from any of these power sources:
• four AA batteries (not supplied)
• standard AC power (using an optional AC adapter)
• vehicle battery power (using an optional DC adapter)
Note:
Using an adapter automatically disconnects the internal
batteries.
Installing Batteries
You can power the CTR-116 with four AA batteries. For the
longest life, we recommend alkaline batteries. Or, you can use
rechargeable nickel-cadmium batteries (RadioShack Cat. No.
23-325) and charge them with a battery charger, such as Cat.
No. 23-242.
Cautions:
• Use only fresh batteries of the required size and recom-
• Do not mix old and new batteries, different types of batter-
mended type.
ies (standard, alkaline, or rechargeable), or rechargeable
batteries of different capacities.
5
14-1122.fm Page 6 Wednesday, May 17, 2000 9:55 AM
1. Press down on the batt ery co mpartment cover and slide it off in
the direction of the arrow.
2. Put the batteries into the compartment as indicated by the
polarity symbols (+ and –)
marked inside.
3. Replace the cover.
The
REC/BATT
indicator at the upper left co rner o f the fro nt pa nel lights when you record. If the indicator lights dimly or not at
all, replace the batteries.
RECORD
Y
A
L
P
REWIND
REVIEW
F
-
T
S
A
F
E
U
C
P
O
T
S
T
C
E
J
E
E
S
U
A
P
C
I
M
T
T
A
/B
C
E
R
E
AR
P
REC/BATT
H
M
I
C
REMOT
D
C
6
Cautions:
• Always remove old or weak batteries. Batteries can leak
chemicals that can destroy electronic parts.
6
14-1122.fm Page 7 Wednesday, May 17, 2000 9:55 AM
• Dispose of old batteries promptly and properly. Do not burn
or bury them.
Note:
At the end of a Ni-Cd rechargeable battery’s useful life, it
must be recycled or disposed of properly. Contact your local,
county, or state hazardous waste management authorities for
information on recycling or disposal programs in your area.
Some options that might be available are: municipal curb-side
collection, drop-off boxes at retailers such as your local RadioShack store, recycling collection centers, and mail-back programs.
Using AC Power
To power the CTR-116 from an AC outlet, you need an AC
adapter, such as Cat. No. 273-1454.
Cautions:
• The recommended adapter supplies 6 volts DC power and
delivers at least 150 milliamps. The adapter’s center tip
must be set to negative, and its plug must properly fit the
DC 6V
CTR-116’s
meet these specifications could damage the CTR-116 or
the adapter.
• Be sure you connect the adapter to the CTR-116 before
you plug it into the AC outlet, and unplug the adapter from
the AC outlet before you unplug it from the CTR-116.
jack. Using an adapter that does not
7
14-1122.fm Page 8 Wednesday, May 17, 2000 9:55 AM
Follow these steps to power the CTR-116 with an AC adapter.
D
R
O
C
E
R
Y
A
L
P
IND
EW
W
R
VIE
E
R
F
-
T
S
A
F
E
U
C
P
TO
S
T
C
JE
E
E
AUS
P
C
I
M
T
T
A
B
/
C
E
R
E
A
R
P
H
MIC
R
E
M
O
T
D
C
6
DC 6V
1. Insert the adapter ’s 5.5 mm outer diameter/2.1 mm inner
diameter barrel plug into the adapter’s cord, with the tip set
to negative.
2. Insert the barrel plug into the CTR-116’s
DC 6V
jack.
3. Plug the adapter into a standard AC outlet.
Using Ve hicle Battery Power
You can operate the CTR -11 6 fro m y our v eh ic le’ s ba tte ry with a
DC adapter (not supplied), such as Cat. No. 273-1802.
Cautions:
• The recommended adapter supplies 6 volts DC power and
delivers at least 150 milliamps. The adapter’s center tip
must be set to negative, and its plug must properly fit the
DC 6V
CTR-116’s
meet these specifications could damage the CTR-116 or
the adapter.
• Be sure you plug the adapter into the CTR-116 before you
plug it into the cigarette-lighter socket, and unplug the
jack. Using an adapter that does not
8
14-1122.fm Page 9 Wednesday, May 17, 2000 9:55 AM
adapter from the cigarette-lighter socket before you unplug
it from the CTR-116.
Follow these steps to power the CTR-116 from your vehicle’s
cigarette-lighter socket.
D
R
O
C
E
R
Y
A
L
P
D
IN
W
E
W
R
IE
V
E
R
F
-
T
S
A
F
E
U
C
P
O
T
S
T
C
E
J
E
E
S
U
A
P
C
I
M
T
T
A
B
/
C
E
R
E
A
R
P
H
M
I
C
R
E
M
O
T
D
C
6
DC 6V
1. Set the adapter’s voltage switch to 6 volts.
2. Insert the adapter ’s 5.5 mm outer diameter/2.1 mm inner
DC 6V
diameter barrel plug into CTR-116’s
jack.
3. Plug the other end of the adapter into the vehicle’s
cigarette-lighter socket.
Note:
If the CTR-116 does not operate properly when connected to a cigarette-lighter socket, unplug the adapter and clean
any ashes and other debris from the socket.
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.