Opticon CRD 1531 User Manual

CRD-1531
⑧ ⑦
Quick Start Guide
Introduc tion
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store in a safe place.
• The CRD-1531 is a designated communication modem cradle for the DCL-1530 and the DCL-1531 data collectors.
Notice
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages, howsoever caused.
Caution and Warning
Handling Instructions
• Do not attempt to disassemble, modify or update this product.
• Do not drop this product or put heavy items on this product.
• Do not insert foreign substances into this product.
• Do not use this product in the following areas:
- In areas exposed to direct sunlight for long periods of time.
- In dusty environments.
- Near water or other liquids, or in extremely high humidity.
- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce
heat.
- Near microwaves, medical devices, or low-power radio stations.
• If water or any metallic object gets into this product and if you detect smoke or a strange smell coming from the device, please stop operating the unit and contact your nearest dealer.
• When cleaning this product, rub gently with either a soft dr y cloth or a damp cloth with mild detergent.
Before Getting Started
Whatʼs in the Box
Confirm that you have the following items before getting started:
No. Items Function
1 Cradle Designated communication cradle for the DCL-1530 and the DCL-1531.
2 AC Adapter Kit Designated AC adapter kit for the CRD-1531.
3 Modular Cable and Splitter Designated modular cable and a splitter for the CRD-1531.
4 Quick Start Guide Provides product inf ormation and instruction guide.
Not e: The number o f acce ssorie s may diffe r depe nding on th e prod uct s pecifi cation .
Ple ase c ontact the n eares t deal er if acces sories are d amage d or m issing .
Copyright 20 07, Opticon All rights rese rved.
Overview
CRD-1531 Basic Specifications
Parameter Specif ications
Physical Features
Display Section Status
Interface Section
Size
Weight
LEDs
(H)67.5×(W)71.5×(D)98.5 mm Max
75g Max (excl. cable or AC adapter)
Power Status: red
Data Reception Status: green
Data Transmission Status: yellow
Comm. Line Telephone Line
Comm. Line Voltage
Comm. Protocol
Data Compression Scheme
Error Correction Scheme
Baud Rate
Modulat ion Method
Dialing
Modem Control
48V
ITU-T V.90, V.34,V.32bis, V.32, V22bis, V.22, V.23, Bell 212A, V.21 or Bell 103 (selectable)
ITU-T V.42bis or MNP5 (selectable)
ITU-T V.42 or MNP2-4 (selectable)
9600bps to 56kbps Depends on the comm. protocol.
PCM, TCM, or QAM
Pulse: 10/20pps, DTMF (selectable)
AT Command
Line Connector RJ-11 6P Modular Connector
Power Supply Section
Durability
Main Power AC Adapter: 6V/2A
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Shock Endurance
Anti-static Electricity
0 deg. C to 40 deg. C
25% to 85% (non-cond ensing)
-20 deg. C to 60 deg. C
20% to 90% (non-condensing)
Dropped 6 times onto concrete from a height of 75cm with no defects found.
±
15kV (no destructio n)
Detailed View
No. Name Function
DC Power Supply Connector
Modular Jack A connector for telephone line.
IrDA Communication
Window
Power Supply
Status LED (red)
Data Reception
Status LED (green)
Data Transmission
Status (Yellow)
DIP Switches
Serial Label
A connector a dedicated AC adapter.
Window for the communication between the data collector and the cradle.
This LED turns solid red when the power is turned ON.
This LED turns solid green when there is a data reception via IrDA.
This LED turns solid yellow when there is a data transmission via IrDA.
DIP switches to configure the baud rate of the IrDA.
Using the Cradle
DIP Switch (DIPSW) Configuration
Use the DIP switches on the bottom of the CRD-1531 to configure IrDA baud rate setting.
*
The cradle DIP switch
settings override the host
Memo
settings. Set SW6 to OFF to disable host settings.
*
Plea se op en th e DIP switch cover when using the DIP switches.
*
Pleas e clo se th e DIP
SW 1
Please contact OPTICON or your local dealer.
The Netherlands
U.S.A.
France
Germany
Italy
Spain
More product details, additional support, and configuration options (from the Universal Menu Book) are available at www.opticon.com.
Opticon Sensors Europe B.V.
tel: +31 (0)23-5692700
Opticon Inc.
tel: 800-636-0090
Opticon S.A.S.
tel: +33 (0)1-41461260
Opticon Sensoren GmbH
tel: +49 (0)6074-91890-0
Opticon s.r.l.
tel: +39 (0)051-6321800
Opticon Sensores S.L.
tel: +34 (0)902-747469
email: sales@opticon.com
/
/
email: opticon@opticon.fr
/
email: sales.de@opticon.com
/
email: opticon@opticonitalia.it
/
email: info@opticon.es
/
switch cover after using the DIP switches.
Contact
Sweden
United Kingdom
Taiwan
China
Australia
Brazil
DIPSW Table
Baud Rate
SW 1 SW 2 SW 3 S W4 SW 5 S W6
115.2Kbps
57.6Kbps
38.4K bps
19.2Kbp s
Opticon Sensors Nordic AB
tel: +46 (0)8-58548560
Opticon Limited
tel: +44 (0)1582-635100
Opticon Far Eastern Ltd.
tel: +886 2-27597444 / email: taiwan@opticon.com
Opticon Sensors Europe B.V., Shanghai Representative Oce
tel: +86 21-64480881
Opticon Sensors Pty. Ltd.
tel: +61 (0)2-43402666
Opticon Sensors Europe B.V., Latin American Oce
tel: +55 11-8322 2244
ON ON ON
OFF ON ON
ON OFF ON
OFF OFF ON
9.6Kbp s ON ON OFF
4.8Kbps OFF ON OFF
2.4K bps ON OFF OFF
email: henrik@opticon-sensors.se
/
email: sales@opticon.co.uk
/
email: china@opticon.com
/
email: sales@opticon.com.au
/
email: sales.la@opticon.com
/
DIPSW
× × × × × × × × × × × × × ×
CRD15319062-0-00
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Loading...