Opticon CRD 13 User Manual

CRD-13

Quick Start Guide

Introduction

• The CRD-13 is a designated charging and communication cradle for the H-13.

• Read this quick start guide carefully before installing and/or using this product.

• Keep this quick start guide for future reference and store it in a safe place.

Notice

• This quick start guide may be revised or withdrawn at any time without prior notice.

• This quick star t guide may not, in whole or in part, be copied, photocopied, reproduced, translated or
converted to any electronic or machine readable form without prior written consent of Opticon.

• Trademarks used are property of their respective owners.

• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or
indirect damages howsoever caused.

Cautions and Warnings

1. Handling Instructions

• Do not atte mpt to disassemble, modify or update this device.

• Do not use this device near combustible materials.

• Use only the AC adapter specified for this product.

• Do not drop this pro duct or put heavy items on this product.

• Keep the device out of the reach of small children.

• Do not damage the AC adapter or power cable by bending, twisting, pulling, or heating. Do not use
them if they are s eriously damaged.

• Do not store this device in an ex tremely cold or hot environment.

• Do not touch the AC adapter or power cable while your hands are wet.

• Do not insert foreign substances into the device.

• Do not charge the battery in temperatures l ess than 0 deg. C or greater than 40 deg. C.

• Keep the IrDA communication window clean to avo id communication problems.

• When clea ning thi s prod uct , ru b gently wi th eit her a soft dr y cl oth or a damp cl ot h with mi ld
deterge nt.

• Do not use this product in the following areas:

- In areas exposed to direc t sunlight for long periods of time.

- Near water or other liquids, or in extremely high humi dit y.

- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.

( Please refer to the specification manual for details.)

Before Getting Started

■

Whatʼs in the Box

Confirm that you have the following items before getting started:

No. Item Function

1 Cradle

2 AC/DC Adapter Designated AC/DC adapter with a replaceable plug for the CRD-13.

3 RS-232C Cable Designated RS-232C cable for the CRD-13.

4 USB Cable Designated USB cable for the CRD-13.

5 Quick Start Guide

* The n umber of accessori es may di ffer d epending on the pr oduct specifica tion.
Plea se contac t the nea rest deal er if accessori es are da maged or missin g.

Copyright© 2008 OPTO ELECTRONICS CO., LTD. All rights reserved.

Designated charging an d communication cradle for the H-13.

Provides product infor mation and inst ruction guide.

■

CRD-13 Basic Specifications

Parameter Specifications

Physical
Features

Control
Section

Comm.
Section

(H-13-CRD-13)

Comm.
Section

(CRD-13- Host)

Size (H)64.9

Weight Approx. 125g

CPU 32bit RI SC CPU

Internal
Memory

※

1

IrDA

※

RS-232C

2

USB

Power
Supply
Section

Main Power
Supply

Current
Consumption

Charging Time

Power Feed
Section

Display
Section

Durability

For Charging the
Portable Terminal

LED

Operating Temp.

※

Operating Humidity

Storage Temp.

Storage Humidity

Charging Temp.

Shock
Endurance

※

1

B aud Rate: Theoreti cal fi gure

※

2

RS-232C baud rate synchronizes with IrDA baud rate.

※

3

Can be switched ON/OFF using the detection switch.

・

To avoid communication problems between the cradle
and a portable terminal, keep the IrDA window clean.

Memo

・

IrDA communication performance may decline due
to excessive ambient light (especially under strong
sunlight or inverted fluorescent light.)

■

AC adapter Basic Specifications

×

(W)70.0×(D) 144.4mm

ROM : 2 56KB
RAM : 6 4KB

IrDA Ver1.2 (physical layer only)

Baud rate: SiR : 9600 to 115.2kbps
FiR : 4Mbps

Baud rate: 9600 bps

19.2, 38.4, 57.6,115.2 kbps

Ver2.0 (Full-Speed)

Virtual COM

AC Adapter : DC 6.0V, 2.0A

When communicating : 110mA or less
(DC 6.0V, when not charging)

Max: 1.7A or less
(when charging a portable terminal)

Approx. 3 hours

Output: DC 6.0V (Typ.)

3

Electrical terminals : + / -

Power Supply : Red / Green

Data communication : Red / Green

-10 deg. C to 50 deg. C

25% to 85% (non-condensing)

-20 deg. C to 60 deg. C

20% to 90% ( non-condensing)

0 deg. C to 40 deg. C

Dr opped onc e from eac h of 6
angles onto concrete from a height
of 75cm with no defects found.

Parameter Specifications

AC
adapter

Input

Output

Power Voltage: AC 90 to 265V

Current Consumption: 0.5A max.

Power Voltage: 5.7 to 6.3V

Maximum current: 2.0A max.

Overview

■

Detailed View

No. Part Function

Power Supply

①

Status LED

Comm. Status LED

②

IrDA
Communication

③

Window

Detection Switch

④

Portable Terminal
Charging

⑤

Terminals

Guard Bar

⑥

Product Label

⑦

DIP Switches

⑧

DC jack

⑨

USB Connector

⑩

RS-232C Connector

⑪

Alerts users to the status of
power distribution from the
AC adapter to the cradle.

Alerts user s to the status of
the IrDA data transmission.

Th e c radl e c ommu nica tes
with the designated portable
ter minal thr ough the I rDA
communication window.

Term inal d etec tion s witch
to cha nge the set tings o f
the power feeding sectio n.

Electrical terminals for power
distribution to the designated
portable terminal.

To protect the USB, RS-232C
cables and DC jack.

DIP switches to configure the
settings of the CRD-13. Refer to
the DIP Switch Configuration
for details.

DC6.0V power s upply jack .
Please us e the AC adapter.

Connector for U SB interface.

Connector for RS-232C cable.