MULTI STABILIZED OUTDOOR DETECTOR
VX-402REC
voice recording &
warning model
/
402/402R
standard
model
battery
operated model
Reliable Short-Range Detection for
External Areas
Ideal for Event Driven CCTV
Applications
Two Detection Zones for Superior
Stability
Any Message Recordable for Each
Application in Any Language
(VX-402REC)
Simple wire free installation, with
battery operation
(VX-402R)
TheVX-402 Series
New Solutions for Outdoor Protection
Voice Recording / Warning Functions
The VX-402REC provides great flexibility in detector-activated voice applications. As well as the ability to record any message in any language, with its superior playback settings, it allows the right message to be played in every situation.
Easy Voice Recording
By using either the built-in microphone or external recording equipment such as a PC, the VX-402REC allows two messages of up to eight seconds to in length to be recorded.
Voice Warning Function
Once recorded, the two messages can be delivered in one of four different playback sequences.
Sequential Playback
When the VX-402REC first detects someone in the area, it delivers a caution message. If someone is detected in the same
area a second time within 30 seconds of
the first message being given, it is repeated. On a third detection within 30 seconds, the caution message automatically
changes into a warning message.
Caution
(Message A)
First Detection
External Speaker Terminal
The VX-402REC has a voice output terminal allowing an external speaker to be connected. The most common applications for this are either when a high-volume announcement is needed or when the best position for the speaker is away
from the detector unit.
A Variety of Applications
Intruder Prevention: An alarm is activated when an intruder enters the property or prohibited area.
Warning Alert: A safety warning is activated. For example, when children go near a dangerous area such as a swimming pool.
Shop Entrance: A welcome message is given when customers enter a premises.
REC
Caution
(Message A)
PLAY
Second
Detection
Warning
(Message B)
Third
Detection
Directional Detection Playback
When the VX-402REC is used with another detection device such as an outdoor PIR, active photobeam or a magnetic contact, different messages can be set
to make double sure intruders are deterred. The caution message is generated at
the first detection, and the warning message generated at the second detection.
VX-402REC 2nd Detector
Warning
(Message B)
Alarm
( VX-402REC only )
Caution
(Message A)
Day/Night Message
Playback
Changes the message
automatically in daytime
and nighttime, for example giving a welcome
message in daytime and
an alert message at night.
Arm/Disarm Playback
Provides a caution alert
when the Arm Mode is on,
for example when deterrence is intended, and
gives a different message
when disarmed.
No Alarm
Improved False Alarm Protection for Stable Reliability
The VX-402 Series utilises Multiple Detection Pattern Technology two double-layered detection patterns (upper and
lower) both have to be activated to generate an alarm condition. This reduces false alarms, particularly those caused
by temperature changes, light reflection and small animals.
Flexible Detection Range Function
By limiting the detection range, false alarms due to unwanted
movement, e.g., cars, people or animals outside the protected
area can be reduced.
Size Judging Function
The size judgment function virtually eliminates false alarms due to
small animals.
Detection
When only the lower zone
detects a moving object,
the unit is not activated.
When only the upper zone
detects a moving object,
the unit is not activated.
When both the upper & lower zones detect a moving
object, the unit is activated.
Advanced Temperature Compensation
At higher ambient temperatures, the difference between the background temperature and that of a human body is reduced. In such
cases an ordinary PIR might fail to accurately detect the human
body. The VX-402 uses advanced temperature compensation to
automatically increase the detector's sensitivity under high temperature conditions, especially where the background temperature
ranges from 35-37˚C, close to that of the human body.
Double Conductive Shielding
Patented Double Conductive Shielding Technology utilises a special con-
Double Conductive Shielding
ductive filter to cover the element window, allowing infrared energy to pass
through, while blocking and grounding
out unwanted light and RFI sources.
This helps reduce false alarms caused
by car headlights and reflected sun-
Lens
Infrared Rays
light in particular.
DESCRIPTION AND OPERATION (VX-402REC)
Cover
Sensitivity Select Switch
Recording Start Switch
Voice Mode Switch
Lens
Voice Volume
Detection Length Adjustment
Speaker (VX-402REC only)
Amp
Pyro Electric Element
Double Shielding
Multiple Detectors
for Improved Functionality
For advanced functionality and reliability without the need for a control panel,
the VX-402 can be connected to another detector, e.g. PIR, photobeam or
magnetic contact. Various configurations are possible.
Detection Area Extension Function
Wiring two VX-402 series sensors together and selecting the “OR” Mode enables the detection pattern to be effectively doubled.
¥ Application Example 1
VX-402 Area
(2nd Sensor)
Detection
Directional Detection Function
By selecting the "AND" Mode and programming which sensor should be activated first (using DIP Switch Programming), the VX-402 Series can sense direction and will only be activated if motion is in a specified direction.
¥ Application Example 2
Alarm
Master Sensor (VX-402/402REC)2nd Sensor
VX-402 Area
(Master Sensor)
Detection /
Voice Warning
Recording Level Indicator
Recording Level Volume
Detection
LED Indicator
Double Conductive
Shielding
Microphone
External Input Jack
Battery Operated
The battery operated VX-402R allows for low cost simple outdoor installation, whilst providing exceptional
detection capability.
Battery Saving Circuit
Temperature Compensation
Form C Alarm Output and Tamper Output
Low Current Draw
* Transmitter is not included. Use the commercially available transmitter.
( VX-402R )
DETECTION PATTERNS
WIDE ANGLE
TOP VIEW
(ft.)
40
30
20
10
0
10
20
30
40
SIDE VIEW
*Specifications and design are subject to change without prior notice.
NOTE: This unit is designed to detect movement of an intruder and
activate an alarm control panel. Being only a part of a complete system,
we cannot accept responsibility for any damages or other consequences
resulting from an intrusion. This product conforms to the category
"Residential, Commercial and Light Industry" of EMC Directive 89/336 EEC.
0 5 10 12 (m)
(m)
12
10
5
0
5
10
12
0
10 20 30 40
Position A (max. 12m)
(ft.)
(m)
13.3
0
0
0 5 10 12
0 10 20 30 40 (f t.)
Position B (max. 8m)
(ft.)
(m)
13.3
0
0
0 5 10 12
010203040
Position C (max. 5m)
(ft.)
(m)
13.3
0
0
0 5 10 12
010203040
Position D (max. 2m)
(ft.)
(m)
13.3
0
0
0 5 10 12
010203040
ADJUSTABLE ZONES
(15˚ STEP PER NOTCH)
ACTIVE
DETECTION
ZONES
(90˚ WIDE 7 FINGERS)
ADJUSTABLE ZONES
(15˚ STEP PER NOTCH)
(ft.)
(m)
(m)
(ft.)
(m)
(ft.)
(m)
(ft.)
SPECIFICATIONS
MODEL VX-402REC VX-402
Detection Method
Coverage
Detection Zones
Mounting Height
Sensitivity
Detectable Speed
Power Supply
Current Consumption
Alarm Period
Alarm Output
Tamper Switch
Pulse Count
Warm-up Period
Volume of Audible
LED Indicator
Weatherproof
Operating Temperature
Operating Humidity
RF Interference
Mounting
Weight
Standard Accessories
Normal 25mA max. 180mA (N.C.)
Normal 12mA max. 200mA (N.O.)
Selectable N.C./N.O.:28V DC 0.2A max.
LED is blinking during warm-up period
Recording condition
Wall, Pole, Conduit and Electrical Box
9.5
2 ±1sec.
N.C. Opens when cover removed
20 ±5sec. 2 or 4
Approx. 30sec. (LED blinks)
75dB
Alarm condition
550g (19.4oz.)
Pole Mount Kit, Screw Kit, Area Masking Plate
Passive Infrared
12m (40f t.) 90˚ wide
14 zones
0.8
~1.2m (2.7~4ft.)
2.0˚ C (3.6˚ F ) at 0.6m/s
~1.5m/s (1~5ft./s)
0.3
~18V DC
Normal 25mA max. 28mA (N.C.)
Normal 10mA max. 35mA (N.O.)
-
IP54
-
20~+50˚ C (-4~+122˚ F)
95% max.
No Alarm 30V/m
Recommended external speaker
Impedance
Max. Power
Output S.P.L.
Wiring Length
* Speaker with amplifer can not be used * Only one external speaker can be connected
8 ohm
over 30W
over 80dB/m
10m
DIMENSIONS
VX-402/402REC VX-402R
80 (3.15) 82 (3.23)
198 (7.8)
80 (3.15) 108 (4.25)
198 (7.8)
VX-402R
3~9V DC Alkaline or Lithium Battery
Max 3mA (Walktest, LED on)
10uA (Standby)
Approx. 2.5sec.
Form C-Solid State Switch:10V DC 0.01A
Form C
Approx. 20sec. 2 or 4
-
-
-
-
-
Approx. 2min
Disable during normal
operation
Enable during walk test
Wall, Pole
480g (16.9oz.)
mm ( inches )
OPTEX CO., LTD.
(ISO 9001 Certified by LRQA / ISO14001 Certified by JET)
5-8-12 Ogoto, Otsu, Shiga, 520-0101 Japan
TEL+81(0)77 579 8670 FAX+81(0)77 579 8190 http://www.optex.co.jp/e
OPTEX INCORPORATED (USA)
OPTEX (EUROPE) LTD. (UK)
(ISO9001 Certified by NQA)
OPTEX SECURITY SAS (FRANCE)
OPTEX KOREA CO., LTD. (KOREA)
ÒTake Care of the EnvironmentÓ This catalogue uses recycled paper
http://www.optexamerica.com
http://www.optexeurope.com
http://www.optex-security.com
http://www.optexkorea.com
No. 75080-05-909-0503
Loading...