Page 1
HYBRID
PHOTOELECTRIC
BEAM SERIES
Active Infrared Protection with
Smart Line™ Series
SL-100 TNR
100ft (30m) Model
SL-200 TNR
200ft (60m) Model
Flexible Power
The SL-TNR series offers a cost-effective and
versatile solution for protecting a perimeter line
up to 200ft long, where cabling is an issue or
inconvenient.
Ideal for small perimeters, flat roofs, and open
areas, the active infrared dual beam set offers a
lot of flexibility with its hybrid power options,
where the transmitter is powered by Saft LSH-20
batteries, and the receiver can be hardwired.
The SL-TNR series utilizes high-grade aspherical
lenses and also has an anti-frost design with IP65
weather protection to improve its durability during
harsh weather conditions.
Page 2
GREAT FLEXIBILITY WITH POWER OPTIONS
HYBRID ⸺ Hardwired Receiver
For site configurations where one beam is close to a main power source but
the other beam needs to be wireless. The SL-TNR oers the option to hardwire
the infrared beam receiver with the included PCU-5 power converter.
WIRELESS ⸺ With High Density Lithium Batteries
The SL-TNR series has been designed to work with D-size lithium batteries,
and OPTEX recommends the Sa LSH-20 battery. Battery life expectancy is
approximately 5 years when using LSH-20 batteries in both the transmitter
and the receiver (4 batteries in total). LSH-20 batteries could also power the
wireless transmitter when using the battery common unit BCU-5.
Battery-powered iSeries option available with
OTHER KEY FEATURES
Simplified Battery
Replacement
Batteries can be accessed easily
without touching the main unit,
eliminating the need to re-align
the beams.
IR Communication for Low Battery Signal
The SL-TNR features an infrared communication between the
transmitter and the receiver which signals the low battery status. It
means that no wireless transmitter is necessary in the transmitter
beam for this functionality. The system would only need one
wireless transmitter on the receiver beam. If the customer would
like to monitor the status of wireless transmitter’s battery
separately, a second wireless transmitter will be necessary on the
transmitting beam.
Page 3
WIRELESS-READY
How to Add the SL-TNR to Your Wireless Enabled Alarm Panel
To easily connect a battery-powered SL-TNR to your wireless panel, please follow the steps below:
Use a two-input wireless door contact or universal wireless transmitter
1. Take one of your panel manufacturer’s wireless transmitter
2. Register the wireless transmitter on the wireless alarm panel
3. Place the wireless transmitter in the SL-TNR’s rear compartment (back box) and connect the alarm and
tamper pair to the wireless transmitter
4. When the battery power of the SL-TNR is shared with the wireless transmitter, use the BCU-5 (optional)
A Whole
Range of
Applications
Can be
Triggered
by the SL-TNR
INNOVATIVE MECHANICAL DESIGN
Basic Performances:
▶ Battery saving ▶ Beam interruption adjustment ▶ Form C (N.O./N.C.) alarm output
Page 4
ACCESSORIES DIMENSIONS
iSeries (SL
BCU-5
Battery Common Unit Included For iSeries
The BCU-5 allows sharing of power source and lowbattery signals between the beam and the wireless
transmitter.
PCU-5 Power Convert Unit Included for Hybrid
The PCU-5 is a voltage converter needed to
hardwire the receiver and transmitter
SPECIFICATIONS
LSH-20 Sa D Size Lithium Battery
For iSeries: 2 Included per Side
For Hybrid: 2 Included for the Transmitter Unit
D cell 3.6V lithium battery
-100TNRi & SL-200TNRi) Only:
Description One-way binary RF Module
Model
RF
Manufacturer
Module
Frequency option
800.966.7839
sales@optexamerica.com
www.optexamerica.com
EN1941
INOVONICS
902-928 MHz for North America
915-925 MHz for Australia
921-928 MHz for New Zealand
optexamerica
@optexamericafacebook.com/
linkedin.com/
company/optex
Loading...