INSTALLATION INSTRUCTIONS
LASER WINDOW
LASER WINDOW
RLS-LW
RLS-LW
NO. 59-2544-0
REPLACEMENT
2
Loosen the screw on the front
1
window and pull the front cover
forward.
2. Pull the cover
forward.
Rotate the front cover at opposite
2
side of the screw upward and
remove the hooks (x2).
INTRODUCTION
1
1-1
PRECAUTIONS
• Read this instructions carefully prior to installation.
• This instructions uses the following warning indications to provide information
regarding correct usage of the product to prevent harm and damages to
assets. These warning indications are described below.
Ensure these precautions before reading the rest of this instructions.
Warning
Caution
This symbol indicates prohibition.
The specific prohibited action is provided in and/or around the figure.
This symbol requires an action or gives an instruction.
Failure to follow the instructions provided with this indication
and improper handling may cause death or serious injury.
Failure to follow the instructions provided with this indication and
improper handling may cause injury and/or property damage.
Caution
Use exclusively with the RLS-2020 series.
1-2
PARTS IDENTIFICATION
1. Loosen the screw.
As shown in the figure below, use the supplied allen key to put out the hook
3
upward in a leverage motion.
1. Use the allen key
to remove the
hook.
2. Open it slightly
and then pull
out upward.
Caution >>
Do not touch the laser window except its frame.
Do not touch inside the main unit, e.g. mirror.
As shown in the figure below, insert the foot of the front window until it clicks.
4
2. Push the unit until it clicks.
1. Insert the hook.
Note >>
The laser window needs to be
removed when pressing the
reset button or replacing it.
Caution >>
Be sure to turn OFF the
power supply when mounting
or removing the laser window.
Laser Window: x1
Caution >>
Dust and moisture may affect the performance.
The replacement should be done in the condition that rain and dust do not
enter the unit.
OPTEX CO., LTD. (JAPAN)
URL: http://www.optex.net
OPTEX INC. (U.S.)
URL: http://www.optexamerica.com
OPTEX DO BRASIL LTDA. (Brazil)
URL: http://www.optex.net/br/es/sec
OPTEX (EUROPE) LTD. / EMEA HQ (U.K.)
URL: http://www.optex-europe.com
OPTEX TECHNOLOGIES B.V.
(The Netherlands)
URL: http://www.optex.eu
OPTEX SECURITY SAS (France)
URL: http://www.optex-security.com
OPTEX SECURITY Sp.z o.o. (Poland)
URL: http://www.optex.com.pl
Snap the front cover into the main
5
unit.
Note >>
During this replacement job, there is a possibility that the mounting angle
is shifted. Confirm or re-adjust it by using Laser Area Checker(LAC-1) and
REDSCAN Manager software.
OPTEX PINNACLE INDIA, PVT., LTD. (India)
URL: http://www.optex.net/in/en/sec
OPTEX KOREA CO.,LTD. (Korea)
URL: http://www.optexkorea.com
OPTEX (DONGGUAN) CO.,LTD.
SHANGHAI OFFICE (China)
URL: http://www.optexchina.com
Tighten the screw.
6
Tighten the screw.
Copyright (C) 2016 OPTEX CO., LTD.