xHigh luminous intensity
xThrough-hole type
xWater clear lens
xAvailable on tape and reel
The OVLAW4CB7 is a round 3mm white high-intensity through-hole lamp with a 45° viewing angle. It is designed
for wide-angle uniform light output.
Applications
xIndicators for medical, industrial, consumer and office equipment
xIndicators for white goods and home appliances
xInterior and exterior architectural and accent lighting
xSigns and digital information displays, video screen non-color and RGB presentation
xAutomotive backlighting and indicators
ProductPhotoHere
Part NumberMaterialEmitted ColorIntensity Typ. mcd
OVLAW4CB7
InGaN White 3500
NOTES:
1. DIMENSIONS ARE IN INCHES [MM].
2. TOLERANCE IS ± .008 [.20] UNLESS OTHERWISE
SPECIFIED.
3. PROTRUDED RESIN UNDER FLANGE IS .059 [1.5]
MAX.
4. LEADSPACING IS MEASURED WHERE THE LEADS
EMERGE FROM THE PACKAGE.
Lens Color
Water Clear
Moisture
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Operating Temperature Range -40 ~ +85° C
Reverse Voltage 5 V
Power Dissipation 80 mW
Average Forward Current 20 mA
Peak Forward Current (Duty Ratio = 1/10, Pulse Width =0.1ms) 50mA
Current Linearity vs Ambient Temperature -0.2 mA/° C
LED Junction Temperature 125° C
260° C Lead Soldering Temperature (5 seconds maximum)
Electrical and Optical Characteristics
TA = 25o C unless otherwise noted
SYMBOL
PARAMETER MIN TYP MAX UNITS CONDITIONS
IV Luminous Intensity
2 ½
V
Forward Voltage2.6 3.4 4.0 VI
F
50% Power Angle
IR Reverse Current
2225 3500 6105
---- 45 ----
mcd
deg
---- ---- 50 µA VR = 5 V
x ---- 0.31 ---- ---- I
Chromaticity Coordinates
y ---- 0.32 ---- ---- I
Standard Bins (I
= 20 mA)
F
Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x,y) bins shown.
Orders for OVLAW4CB7 may be filled with any or all bins contained as below.
Luminous Intensity (mcd)
6105
4360
0V
3115
2225
0W
0U
I
= 20 mA
F
I
= 20 mA
F
= 20 mA
F
= 20 mA
F
= 20 mA
F
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
4. Part is sensitive to static electricity and precautions must be used when handling products.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.