OPTEK OP230WPS Technical data
查询OP230WPS供应商
Prod uct Bul le tin OP230WPS
March 2001
Her metic Point Source In fra red Emitting Diode
Type OP230WPS
Fea tures
Point source irradiance pattern
•
Wavelength matched to silicon’s peak
•
response
• Fast switching speed
TO-46 package style with flat window
•
De scrip tion
The OP230WPS is an 850 nm, top
surface emitting, IRED. The .004”
emitting area centered under a
nondistorting flat lens can be used in
many applications where external lensing
is desired.
The stable VF vs. Temperature
characteristic make them ideal for
applications were voltage is limited
(such as battery operation).
The low tr/tf make them ideal for high
speed operations.
Ab so lute Maxi mum Rat ings (TA = 25o C un less oth er wise noted)
Re verse Voltage .................................................. 2.0 V
Con tin u ous For ward Cur rent....................................... 100 mA
Peak For ward Cur rent (2 µs pulse width, 0.1% duty cy cle).................. 1.0 A
Stor age and Op er ating Tem per a ture Range................... -55° C to +125° C
Lead Sol dering Tem per a ture [1/16 inch (1.6 mm) from case for 5 sec. with sol der ing
iron] ......................................................... 260° C
Power Dis si pa tion ............................................ 200 mW
NOTES:
(1) RMA flux is rec om mended. Du ra tion can be ex tended to 10 sec onds maximum when flow
sol der ing.
(2) De rate lin early 2.0mW/°C above 25°C.
(3) E
is a mea sure ment of the av er age apertured ra di ant in ci dence upon a sens ing area
e(APT)
.250” (6.35 mm) in di am e ter, per pen dic u lar to and cen tered on the me chan i cal axis of the
lens, and .466” (11.84 mm) from the mea sure ment sur face. E
uni form within the mea sured area.
is not nec es sar ily
e(APT)
(1)
(2)
Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972) 323- 2200 Fax (972) 323- 2396
5
Type OP230WPS
Elec tri cal Char ac ter is tics (TA = 25o C un less oth er wise noted)
SYM BOL PA RAM E TER MIN TYP MAX UNITS TEST CON DI TIONS
E
e(APT)
V
I
R
λp
B
θ
HP
t
t
Typ i cal Per for mance Curves
-50 -25 C 0C 25 C 50 C 75C 100C 125C
Apertured Irradiance .5 mW/cm2IF = 100 mA
Forward Voltage 2.20 V I
F
Reverse Current
1.0
µA
Wavelength Peak Emission 850 nm IF = 100 mA
Spectral Bandwidth Between Half Power
Points
Emission Angle at Half Power Points
Rise Time 10 ns I
r
Fall Time
f
For ward Volt age vs. Am bi ent Tem per a ture
Forward Voltage vs. Ambient Temperature
1.95
1.9
1.85
1.8
1.75
1.7
1.65
Temp
Temp
80 nm
±45°
10 ns
Relative Radiant Intensity vs. Angular Displacement
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
Deg.
100 mA
F =
VR = 2 V
IF = 100 mA
IF = 100 mA
= 100 mA
F(PK)
PW = 10 µs, D.C. = 10%
IF = 40 mA
Apt. = .060”
Distance = 1.0”
Angular Displacement - Deg.
Radiant Intensity vs. Forward Current
Radiant Intensity vs. Forward Curre nt
2
1.8
1.6
1.4
1.2
1
0.8
0.6
0.4
0.2
0
10m A 20mA 30mA 40mA 50m A 60m A 70m A 80m A 90 mA 100m A
I
I
F
F
Op tek re serves the right to make changes at any time in or der to im prove de sign and to sup ply the best prod uct pos si ble.
Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972)323- 2200 Fax (972)323- 2396
6
Loading...