Switch in digital video jack outputs:
480-line progressive /576-line progressive,
720-line progressive, 1080-line interlace.
18
KEYBOARD Button
Open/close the virtual keyboard function.
19
SF Button
Adjusting sound field effects.
20
EQ Button
Adjusting equalization effects.
21
VOLUME-
Decrease volume.
22
VOLUME+
Increase volume.
23
A-B Button
Repeat the select.
24
P/N Button
Switch the TV system between PAL, NTSC and AUTO.
25
PREV Button
Skip backward.
26
NEXT Button
Skip forward.
27
PAUSE/STEP Button
Pause or play frame by frame.
28
PSM Button
Power Spectrum Meter on/off.
29
MENU Button
Display DVD menu or open/close PBC.
5
Use
2PCS
Connected to Digital TV set with DVI input
Audio In
Audio Cord
(Y)
(Cb)
(Cr)
Video Component
Input
Rear Panel
Or
S-Video
Audio In
Video In
S-Video
Audio Cord
Video Cord
S-Video Cord
an
If the TV set has the video component input, the video component output of this player can be used.
23
IN
that of
Video In
Video Cord
Rear Panel
Audio In
Audio Cord
Amplifier equipped with Dolby Pro Logic Surround
Video In
Video Cord
Rear Panel
Connect either of the cords
Coaxial In
Optical In
V Coaxial Cord
Optical Cord
Amplifier with Dolby Digital Decoder
Center Speaker
Front Left Speaker
Surround Left Speaker
Set the corresponding channel of any connected speaker not in use as 5.1CH mode.
23
Front Right Speaker
Subwoofer
Surround Right Speaker
and
The player automatically reads disc information.
DVD menu or subtitle displays on TV screen when
playing DVD disc; when playing SVCD and VCD
2.0 discs, menu displays on TV screen and the player
turns into PBC playback status; when playing CD
and VCD1.1 discs, the player plays according
to the track order.
So switch into stop status.
1.Press P/N button to select PAL system if the
system of TV set is PAL, and TV screen displays:
,and TV screen displays:
6.Press STANDBY buttonto enter standby mode.
when
Press PAUSE/STEP button once to entre panse
playback and TV screen displays:
2.Press PAUSE/STEP button n pause mode,
and each press moves one frame forward.
Press PAUSE/STEP button continuously to
entre playback.
decrease
When you set the screen saver mode to ON (See
Page 22 for details), the display on TV screen
turns to screen saver status after the picture on
TV screen keeps still for about 2 minutes (in the
mode such as pause mode, stop mode, menu select,
setup menu, no disc mode and so on).
Press KEY # button to increase tone. Each press
increases tone for 1 level, and the maximum level
is 16.
Press KEY button to increase tone. Each press
increases tone for 1 level, and the maximum level
is 16.
and then press
Select main menu 1and TV screen displays as follows:
2.Submenu displays on TV screen after entering into
main menu 1.
For instance, pres number 5 and the player begins to
play the 5th track.
5.Press RETURN button to return to submenu. Press
it again to return to main menu.
6.Pres the MENU button to shut off PBC and begins
the sequence playback function.
buttons 0-9 to directly select the corresponding
track if the track number is above 10 (including
10).
For example:
Language varies with different recorded discs.
When playing some DVD discs, the press of
LANGUAGE button may result in playing the
track from its beginning.
Press MUTE button and the word of MUTE
displays on TV screen.
2/2:
Press MUTE button when there is no audio output.
You can select forward or backward playback
to search a certain point you desire when in
playback.
1. Press FWD button and then the player starts
fast forward playback.
to resume
Each press of F
WD button switches the playback
speed of DVD, Super VCD, VCD and CD discs
in the following sequence circularly:
2.Press REV button and then the player starts
fast reverse playback.
REV button
1. Press REPEAT button each time and TV screen
displays:
You may enjoy slow playback according to the
following steps.
1.Press SLOW button to turn to slow playback
mode, and the following displays on TV screen.
When playing disc, press A-B button to play a certain
section you desire repeatedly.
press
Sound Field / EQ Adjustment
When playing discs, you may adjust sound field
or EQ mode according to your own likes to get
different sound effects.
1. Pres SF button to adjust sound field mode.
The optional settings: OFF, CONCERT, LIVING
ROOM, HALL, BATHROOM, CAVE, ARENA and
CHURCH.
2. Press EQ button to adjust EQ mode.
The optional settings: OFF, ROCK, POP, LIVE,
DANCE, TECHNO, CLASSIC and SOFT.
NOTE
When playing some discs, select some EQ or sound
field modes, and some uncomfortable sounds will
probably appear. So please select other EQ or
sound field modes to enjoy.
please press
SF
EQ
then played
Press GOTO button, and the TV set screen displays:
And the press NUMBER button “6” to select title
press
press
once again.
and the
DVI OUTPUT
You can press DVI button to select the DVI
output mode.
1. Press DVI button to get 720-line progressive
output.
2. Press DVI button again to get 1080-line
interlacing output.
3. Press DVI button once again to get 480-line
progressive output (NTSC output) or 576-line
progressive output (PAL output) according to the
current output system of the DVD player.
NOTE:
Some TV sets do not support one or more DVI
output modes of this player.
DVI
1
2.Use the four direction arrows to select the
function you want to set, and then press
SELECT button for verification. For instance,
to select SUBTITLE.
JPEG
The preview image will appear in the preview
windows.
21
and the
Light Control On
English
On
CURSOR
SETUP
Light Control On
English
On
SELECT
For example: press UP/DOWN arrow to select
"Medium", and then press SELECT button. The
TV screen displays:
TV set system not properly adjusted.Readjust system of your TV set.
Connect signal securely.
Clean your disc.
Press MUTE button again.
Connect signal securely.
Reset the AV/TV status of your TV set.
Press P/N button on the remote control to set the system.
Readjust color of your TV set.
Load a disc.
Reload a disc, with the label side facing up.
Turn on the player, unload the disc and leave it on for about one hour.
Use the remote control properly.
Replace both batteries.
Wait 5~10 seconds and the player will automatically return to normal.
Operate once more.
Turn off the player for 1 to 2 minutes, then turn it on again.
26
OTHERS
Specifications
Disc Types
Output
DVD VIDEO
Divx*
Super VCD
VCD1.0, 1.1, 2.0
Analog audio output stereo output, 5.1Channel Output
Digital Audio Output Coaxial Output, Optical Out jack
Video Output
S-VideoO utput Y, C
DVI
Component Video Output Y Cb Cr
Video
Characteristics
Audio
Characteristics
General
Specifications
Operating
Temperature
Operating
Humidity
DivX version is still upgrading continuously and the latest version of this unit is DivX 5.1.
*
The design and explanation of this product are subject to change and renovate without notice.
We cannot ensure all the discs are fluently read because of the disc quality, disc make quality
and format difference.
As for the special make of some discs, some functions can not be realized when playing, which is not the
malfunction of the unit.
Video Amplitude 1.0Vp-p(75 )
S-Video Output Amplitude Y:1.0Vp-p(75 ), C:0.286Vp-p(75 )
Component Video Output Amplitude Y:1.0Vp-p(75W), Cb/Cr: 0.7Vp-p(75W)
Frequency 20Hz~20KHz( 1dB)
Signal-to-noise Ratio >100dB
Total harmonic distortion <0.01%
Power Supply 120V,60Hz
Power Consumption 20W
Dimensions 16.53X10.63X1.6INCHS
Mass 5.5POUNDS
535
15 75% (no condensation)
27
28
29
5193613
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.