OPPO Digital BDP-83 User Manual

®
Blu-ray Disc Player
Model No. BDP-83
USER MANUAL
READ CAREFULLY BEFORE OPERATION
Table of Contents
Important Information...............................................................1
Important Safety Instructions .................................................................................... 1
Precautions ................................................................................................................. 2
FCC Statement ............................................................................................................ 2
Trademarks ................................................................................................................. 2
Compatible Disc Types ............................................................................................... 3
Discs that cannot be played.............................................................................................................3
Disc care and handling ....................................................................................................................3
Notes about BD-ROM compatibility ................................................................................................. 4
Copyright Protection...................................................................................................4
Region management information.....................................................................................................4
INSTALLATION .......................................................................... 5
Front Panel Controls ................................................................................................... 5
Front Panel Display Window .......................................................................................5
Rear Panel Connectors ............................................................................................... 6
Remote Control ........................................................................................................... 7
Remote Control Buttons ..................................................................................................................7
Back Side.........................................................................................................................................8
Battery Installation ...........................................................................................................................8
Using the Remote Control ...............................................................................................................8
Setting the Remote Code ................................................................................................................9
Connecting to a Display............................................................................................10
HDMI Connection...........................................................................................................................10
DVI Connection..............................................................................................................................11
Component Video Connection.......................................................................................................12
Connecting to an Audio System ............................................................................... 13
Connecting to a Receiver/Amplifier with HDMI Input/Output .........................................................13
Connecting to a Receiver/Amplifier with 7.1ch/5.1ch Audio Input .................................................14
Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder........................................15
Connecting to a Stereo Audio System...........................................................................................16
Connecting to the Internet ....................................................................................... 17
Custom Installation................................................................................................... 18
External IR (Infrared Remote) Installation .....................................................................................18
Setting Up the Player - Easy Setup Wizard ..............................................................19
Access the Easy Setup Wizard......................................................................................................19
Choose the Primary Video Output ................................................................................................. 19
Select the Best Output Resolution.................................................................................................20
Determine the Display Aspect Ratio .............................................................................................. 21
i
Select the Audio Setting.................................................................................................................23
Complete the Easy Setup Wizard ..................................................................................................23
BASIC OPERATIONS................................................................ 24
Disc Playback............................................................................................................ 24
Fast Playback............................................................................................................ 24
Pause and Frame-by-Frame...................................................................................... 25
Slow Playback........................................................................................................... 25
Blu-ray Disc Menu Playback..................................................................................... 26
DVD Menu Playback.................................................................................................. 26
On-Screen Display..................................................................................................... 26
Volume Control ......................................................................................................... 27
Mute........................................................................................................................... 27
Audio Language/Track Selection ............................................................................. 27
Subtitle Selection ..................................................................................................... 28
Angle Selection......................................................................................................... 28
Picture-in-Picture and Secondary Audio .................................................................. 28
BD-Live ...................................................................................................................... 29
ADVANCED OPERATIONS ....................................................... 30
TV System Selection ................................................................................................ 30
Output Resolution..................................................................................................... 30
Zooming and Aspect Ratio Control .......................................................................... 31
Zoom Levels for HDMI Output .......................................................................................................31
Zoom Levels for Component Video Output....................................................................................34
Repeat Playback....................................................................................................... 35
Repeat a Selected Section....................................................................................... 35
Shuffle and Random Playback.................................................................................. 35
Playback by Chapter or Track Number.................................................................... 36
Playback from a Specific Location .......................................................................... 36
DVD and Blu-ray Discs ..................................................................................................................36
CD and SACD discs.......................................................................................................................37
Memory and Automatic Resume .............................................................................. 38
Viewing Pictures on DVD-Audio Discs ..................................................................... 39
Pure Audio Mode....................................................................................................... 39
MEDIA FILE PLAYBACK........................................................... 40
Playback from a USB Drive....................................................................................... 40
The Home Menu ........................................................................................................ 40
Playing Music Files ................................................................................................... 41
Playing Movie Files ................................................................................................... 42
Viewing Photo Files .................................................................................................. 43
Adding Background Music .............................................................................................................43
ii
SETUP MENU OPTIONS...........................................................44
Using the Setup Menu System..................................................................................44
Playback Setup.......................................................................................................... 46
Video Setup ...............................................................................................................48
Picture Adjustment.........................................................................................................................52
Audio Format Setup...................................................................................................55
Audio Signal Reference Chart .......................................................................................................57
Recommended Audio Format Options ..........................................................................................58
Audio Processing Setup............................................................................................ 60
Speaker Configuration ................................................................................................................... 60
Other Audio Processing Settings...................................................................................................64
Device Setup ............................................................................................................. 65
Network Setup........................................................................................................... 68
REFERENCES...........................................................................70
Useful Notes.............................................................................................................. 70
Troubleshooting ........................................................................................................ 70
Specifications............................................................................................................ 71
Language Code List ..................................................................................................72
LIMITED WARRANTY...............................................................73
OPPO Digital, Inc. Limited One Year Warranty ........................................................73
iii

Important Information

CAUTION:
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
accompanying the appliance.
presence of uninsulated “dangerous voltage” within
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instruction in the literature
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE PLACED ON THE APPARATUS.
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
This label is located on the laser protective housing inside the product.
CLASS I LASER
PRODUCT

Important Safety Instructions

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched, particularly at plug, receptacle, and the point
where it exits from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
1
IMPORTANT INFORMATION

Precautions

Before connecting the AC power cord to the appliance, make sure the voltage designation of the appliance corresponds to the local electrical supply. If you are unsure of your power supply, contact your local power company. The acceptable power input range is AC ~ 100V-240V, 50/60Hz
The player is still receiving power from the AC power source as long as it is connected to the wall outlet, even if the player itself has been turned off.
Unplug the power cord if you are not going to use the product for an extended period of time. Hold the power plug when unplugging. Do not pull on the cord.
The main plug is used as the mechanism for cutting off power, therefore make sure it is easy to unplug.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
To ensure proper ventilation around this product, do not
place this product on a sofa, bed or rug. When installing this product on a wall or bookshelf, you need to provide appropriate space.
High temperature will lead to abnormal operation of this unit. Do not expose this unit or batteries to direct sunlight or near other heating objects.
When moving the player from a cold location to a warm one, or vice versa, moisture may condense on the laser pickup unit inside the player. Should this occur, the player may not operate properly. In such a case please turn the unit on for 1-2 hours (without a disc) to facilitate moisture evaporation.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trademarks

“Blu-ray Disc”, “BONUSVIEW” and “BD-Live” are trademarks of Blu-ray Disc Association.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.
DVD Logo is a trademark of DVD Format/Logo Licensing Corp., registered in the U.S., Japan and other countries.
Super Audio CD, SACD and the SACD logo are joint trademarks of Sony Corporation and Philips Electronics N.V. Direct Stream Digital (DSD) is a trademark of Sony Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
Designed for Windows Media, Microsoft, HDCD, and the HDCD logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
“480p/720p/1080i/1080p” up-converting arrow logo, “Source Direct” and “True 24p” logos are trademarks of OPPO Digital, Inc.
VRS™, Video Reference Series™, Precision De- interlacing™, Precision Video Scaling™, Progressive Cadence Detection™ and AutoCUE-C™ are trademarks of Anchor Bay Technologies Inc. All products bearing the DVDO®, iScan™ and VRS™ trademarks are based upon technologies, architectures, and product designs originally created and developed by the Anchor Bay Team.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio | Essential are trademarks of DTS, Inc. © 1996-2008 DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
All other trademarks are the properties of their respective owners.
2
IMPORTANT INFORMATION

Compatible D isc Types

Type/Logo Features Manual Icon
High Definition (HD) movie and music discs BD-ROM and BD-RE/BD-R discs in BDMV and BDAV mode, including 8cm
BD-Video
DVD-Video
discs (single layer) and DL discs.
- Discs supporting BONUSVIEW (BD-ROM version 2 Profile
1 version 1.1/Final Standard Profile) that allows Virtual packages or Picture-in­Picture functions to be used.
- Discs supporting BD-Live (BD-ROM version 2 Profile 2) that provides
interactive features when the player is connected to the Internet.
High quality movie and music discs Commercially released DVD discs, DVD+RW/DVD+R/DVD-RW/DVD-R using Version 1.1 of the DVD Video Recording Format, finalized.
DVD-Audio
Super Audio CD
CD
AVCHD
Multi-channel or stereo high resolution audio with compressed digital video or still pictures. Some DVD-Audio discs also contain a DVD-Video portion.
SACD: High resolution audio-only disc with stereo and/or multi-channel audio. Hybrid disc with both high resolution and CD-compatible layers.
Compact Discs (CD) that contain audio and music.
High-definition digital video camera format using efficient data compression coding technology.

Discs that cannot be played

BDs with cartridge
DVD-RAMs
HD DVDs
Data portion of CD-Extras
BD-Video/DVD-Video with a different region code

Disc care and handling

DVD-A
SACD
Some DualDiscs: A DualDisc is a two sided disc with DVD on one side and digital audio on the other side. The digital audio side does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback is not guaranteed.
Music discs encoded with copyright protection technologies: among such discs, some do not conform to the CD standard and may not be usable on this player.
To keep the disc clean from scratches or fingerprints, handle the disc by its edge. Do not touch the recording surface.
Blu-ray Discs record data in very high density and the record layer is very close to the disc surface. For this reason, Blu-ray Discs are more sensitive to dust and fingerprints than DVD. Should you encounter playback problems and see dirty spots on the disc surface, clean the disc with a cleaning cloth. Wipe the disc from the center out along the radial direction. Do not wipe the disc in a circular motion.
Do not use record cleaning sprays or solvents such as benzene, thinner and anti-static spray.
Do not attach labels or stickers to discs as this may cause the disc to warp, become imbalanced or too thick, resulting in playback problems.
Avoid exposing the discs to direct sunlight or heat sources.
Do not use the following discs: o Discs with exposed adhesive from removed stickers
or labels. The disc may get stuck inside the player.
o Warped or cracked discs. o Irregularly shaped discs, such as heart or business
card shapes.
3
IMPORTANT INFORMATION

Notes about BD-ROM compatibility

Since the Blu-ray Disc specifications are new and evolving, some discs may not play properly depending on the disc type, version and encoding. It is possible that a Blu-ray disc manufactured after the player was manufactured uses certain new features of the Blu-ray Disc specifications. To ensure the best possible viewing experience, the player may need a firmware or software update from time to time. Please visit OPPO Digital’s web site
www.oppodigital.com to check if updates are available.

Copyright Protection

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Region management information

This player is designed and manufactured to respond to the region management information. If the region number of a BD-Video or DVD disc does not correspond to the region number of this player, this player cannot play the disc.
BD-Video: This player plays BD-Video with marks containing the region code A.
DVD-Video: This player plays DVD-Video with marks containing the region code 1 and ALL.
4

INST ALLA TION

Front Panel Controls

1 2 3 4 5 6 7
1. POWER Button
2. IR Remote Sensor
3. Disc Tray
4. Display Window

Front Panel Display Window

1 2 3 4 5 6 7 8 9
11 12 13 14
1. Disc Type Indication – Indicates the currently playing disc type
2. Title/Group – When illuminated, the displayed time applies to a title or group
3. Track/Chapter – When illuminated, the displayed time applies to a track or chapter
4. Total – When illuminated, the displayed time is the total play time
5. Remaining – When illuminated, the displayed time is the remaining play time
6. Playback Status – Indicates playback status such as Play, Pause, Repeat, Repeat All, Random/Shuffle, and A-B Repeat
5. OPEN/CLOSE Button
6. Playback Control and Navigation Buttons
7. USB Port
10
7. Angle Icon – Indicates that the scene contains additional camera angle(s)
8. HDMI – Indicates that the HDMI output is active
9. Network – Indicates that a network cable is attached
10. Reserved – Not in use
11. Mute Icon – Indicates that the audio is muted
12. Audio Channel Indication – Indicates whether the audio is 2ch stereo or multi-channel surround
13. Main Display – Text messages and numeric display
14. Audio Type Indication – Indicates the type of audio tracks playing
5
INSTALLATION

Rear Panel Connectors

1 2 3 4 5 6 7 8 9
1. 7.1CH/5.1CH Audio Output
2. Stereo Audio Output
3. Coaxial and Optical Digital Audio Output
4. Composite Video Output
5. Component Video Output
6. Ethernet LAN Port
7. USB 2.0 Port
8. HDMI Output
9. IR IN and OUT Ports
In addition to the above connectors, the AC power inlet is also located on the rear panel. The inlet is the IEC60-320 C18 type. Only the included AC power cord or an approved power cord with an IEC60-320 C17 type plug should be used.
6
INSTALLATION

Remote Control

Remote Control Buttons

1
2
3
4
5
6
7
8
9
10
11
2
12
13
14
15
16
17
18
1. POWER: Toggle power
STANDBY and ON
2. ON/OFF: Discrete on/off
power buttons
3. PURE AUDIO: Turn
19
20
21
22
23
24
25
off/on video
4. NUMBER Buttons: Enter numeric values
5. CLEAR: Clear numeric
input
6. TOP MENU: Show BD
top menu or DVD title
26
27
28
29
menu
7. ARROW and ENTER
Buttons: Navigate menu selection
8. SETUP: Enter the
player Setup Menu
9. COLOR Buttons:
30
Function varies by content
10. PLAY: Start playback
11. STOP: Stop playback
31
32
33
34
35
36
37
38
12. REV: Fast reverse play
13. PREV: Skip to previous
14. SUBTITLE: Change
subtitle language
15. AUDIO: Change audio
language or channel
16. SAP: Turn on/off
Secondary Audio Program
17. A-B REPLAY: Repeat
play the selected section
18. RESOLUTION: Switch
output resolution
19. SOURCE: Go to Home
Menu to select media source
20. OPEN: Open/close the
disc tray
21. P/N: Switch output TV
system: NTSC, PAL or MULTI
22. DIMMER: Dim front
panel display
23. VOLUME +/-:
Increase/Decrease volume
24. MUTE: Mute audio
25. HOME: Go to Home
Menu to select media source
26. PAGE UP/DOWN:
Show previous/next page
27. GOTO: Play from a
specified location
28. DISPLAY: Show/hide
On-Screen Display
29. POP-UP MENU: Show
BD pop-up menu or
DVD menu
30. RETURN: Return to the
previous menu or mode
31. PAUSE: Pause
playback
32. FWD: Fast forward play
33. NEXT: Skip to next
34. ANGLE: Change
camera angle
35. ZOOM: Zoom in/out
and adjust aspect ratio
36. PIP: Show/hide Picture-
in-Picture
37. REPEAT: Repeat play
38. LIGHT: Activate back
light for the remote control
NOTE
When a button is pressed but its function is invalid or unavailable at the moment, the TV screen displays a circle with a diagonal line:
7
INSTALLATION

Back Side

1
2
3
With Battery Cover Battery Cover Removed

Battery Installation

1. Index Finger Notch 1: When your index finger is
placed at this notch while holding the remote control, your thumb is within easy reach to the navigation buttons (ARROW, ENTER, TOP MENU and POP­UP MENU).
2. Index Finger Notch 2: When your index finger is
placed at this notch while holding the remote control, your thumb is within easy reach to the playback control buttons (STOP, PLAY, PAUSE, PREV, NEXT, REV, FWD).
3. Battery Cover: Remove to replace batteries or set
remote code.
4. Batteries: Use (2) size AA or LR6 batteries.
5. Remote Code Switch: Adjust the position of the
4
switch to set the remote control to use the indicated remote code.
5
1. Remove the battery compartment cover
2. Insert batteries
3. Replace the battery compartment cover

Using the Remote Control

When using the remote control, the front window of the remote control should be pointed to the infrared sensor on the front panel within an angle of ±30° and a range of about 26 ft.
 
Within about 26ft
8
INSTALLATION

Setting the Remote Code

The remote control supports one of three remote codes. The default is “Code 1”. If you have other OPPO products placed close to the BDP-83, they may inadvertently respond to the BDP-83 remote control. In this case you can select a different remote code to avoid conflicts.
To select a new remote code, open the battery compartment cover of the remote control, and then use a ball point pen to flip the switch to one of the positions marked as “1”, “2”, or “3”. Close the battery compartment
cover. Make sure that the BDP-83 player is turned on and the disc tray is ejected. Aim the remote control at
the player. Press and hold the ENTER button for 5 seconds. The player will start using the new remote code.
Battery Compartment
Remote Code Switch
CAUTIONS
Never drop the remote control or expose it to moisture.
Never expose the infrared remote sensor on the front panel to direct sunlight or other
strong light sources.
Remote may not operate consistently when batteries become low. Replace them if operation deteriorates.
If the remote control will not be used for a long time, please remove the batteries.
Use the batteries correctly to avoid possible leakage and corrosion. Do not leave the
batteries exposed to direct sunlight or high temperature environment for a long period of time. Do not heat or expose to flame. Do not mix old and new batteries. Do not use batteries of different types at the same time. Do not attempt to recharge the batteries.
In case battery leakage occurs, do not touch the liquid with bare hands. Wipe out any liquid inside the battery compartment, and insert new batteries.
9
INSTALLATION

Connecting to a Display

HDMI Connection

Rear Panel
Video In
HDMI In
Composite Video Cable (Optional)
HDMI Cable
Method 1 – HDMI Connection Directly to TV
If your TV has an HDMI (High-Definition Multimedia Interface) input, you can use the included HDMI cable to connect the player to the TV. This connection method delivers both video and audio in a pure digital format via a single cable. The HDMI video output of the player allows for the highest possible video quality and resolution.
You may connect the composite video cable to the TV for troubleshooting purposes, just in case
there is a problem with HDMI. However it is not recommended to use the composite video as
the primary method of video delivery to the TV, because it only produces a standard definition video signal and forfeits the advantage of high definition video.
10
INSTALLATION

DVI Connection

Rear Panel
DVI
Audio
DVI
Audio Cable
HDMI - DVI
Cable
Method 2 – DVI Connection to TV
If your TV has a DVI input that supports HDCP*, you can purchase an HDMI-DVI adapter cable to connect the player to the TV. This connection method delivers digital video to the TV without any signal degradation. The HDMI video output of the OPPO Blu-ray Disc player presents the highest possible video quality and resolution.
Please use the Red/White audio cables to connect the STEREO AUDIO OUT terminals of the player to the TV. Make sure the audio cables are connected to the same input terminal group on the TV as the DVI input. Usually the input terminals are marked as “DVI Audio” or “PC Audio”. On some TVs you may need to use an RCA-3.5mm Mini-Jack adapter cable to connect the audio.
You may connect the composite video cable to the TV for trouble-shooting purpose, just in case
there is a problem with DVI. However it is not recommended to use the composite video as the
primary method of video delivery to the TV, because it only produces a standard definition video signal and forfeits the advantage of high definition video.
*NOTE
HDCP stands for High-bandwidth Digital Content Protection. The HDMI output of the OPPO Blu-ray Disc player uses HDCP to encrypt the digital audio and video content. The TV needs to support HDCP so it can decrypt the content and properly display it.
11
INSTALLATION

Component Video Connection

Rear Panel
Audio
Audio
Cable
Component
Video
Pb/Cb
Pr/Cr
Y
Component
Video Cable
Method 3 – Component Video Connection to TV
If your TV has no digital video input but has component video inputs, please use a set of component video cables to connect the component video output of the player to the TV. The connectors are color coded, so please make sure the cable connections match on both ends. The component video connection will produce a very clear picture with high color accuracy.
Please use the Red/White audio cables to connect the STEREO AUDIO OUT terminals of the player to the TV. Make sure the audio cables are connected to the same input terminal group on the TV as the chosen component video input.
When the “Primary Output” Setup Menu item in the “Video Setup” section is set to “HDMI”
(see page
48 for details), the component video connection will not output video when playing a
Blu-ray Disc with 1080p 24Hz content, or will only output video with a low resolution (480i/576i)
when playing a DVD. This is not a malfunction. You must set “Primary Output” to “Component” in order to properly use the component video connection.
When playing a Blu-ray Disc, video resolution over the component output can be up to 1080i. 1080p content will be interlaced into 1080i signal for the component output.
Video up-conversion over the component output is only available for unencrypted discs such as home video and consumer-created contents. Most commercially pressed DVD discs are CSS­encrypted and will be limited to 480i/480p resolution. This restriction applies to the component output only. The HDMI output is protected with HDCP and has no such restriction.
You may connect the composite video cable to the TV for trouble-shooting purpose, just in case
there is a problem with component video. However it is not recommended to use the composite
video as the primary method of video delivery to the TV, because it only produces a standard definition video signal and forfeits the advantage of high definition video.
12
INSTALLATION

Connecting to an Audio System

Connecting to a Receiver/Amplifier with HDMI Input/Output

Rear Panel
HDMI Cable
HDMI In
HDMI Cable
HDMI InHDMI Out
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
Method 4 – HDMI Connection to Receiver and TV
HDMI can transmit both audio and video signals over a single cable. If you have an HDMI- capable receiver that can support HDMI audio, you can simply run an HDMI cable from the player to your receiver and enable HDMI audio on the receiver (see your receiver’s owners’ manual for more information). The receiver usually has an HDMI output that you can connect to your TV to pass the video signal.
NOTE
HDMI is a wonderful thing. A single cable can transport both audio AND video from your player to your display. Be aware, however, that HDMI is an evolving standard, and there could be compatibility issues. A receiver that supports audio input over HDMI is required. Some receivers offer HDMI ports solely for video switching. If your receiver does not have audio input capability, please read the following sections regarding other connection methods.
In order to play multi-channel audio for all formats, the receiver must support HDMI v1.1 or later. For Blu-ray Disc, a receiver that supports HDMI v1.3 with decoding capability for Dolby TrueHD and DTS-HD Master Audio is preferred. Please check the specifications of your receiver to ensure that it meets the requirements.
13
INSTALLATION

Connecting to a Receiver/Amplifier with 7.1ch/5.1ch Audio Input

Rear Panel
Audio Interconnect Cables
L
L
R
FRONT SURROUND SUBWOOFER S. BACK
CENTER
R
Receiver/Amplifier with 7.1ch Audio Input
L
R
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
Method 5 – 7.1ch Analog Audio Connection
Please use 8 RCA-style audio interconnect cables to connect the FL (Front Left), FR (Front Right), SL (Surround Left), SR (Surround Right), C (Center), SW (SubWoofer), SBL (Surround Back Left) and SBR (Surround Back Right) analog output terminals of the OPPO Blu-ray Disc player to the corresponding multi-channel analog audio input jacks of your A/V receiver or amplifier.
If the A/V receiver or amplifier only has 5.1ch audio input, the SBL (Surround Back Left) and SBR (Surround Back Right) terminals do not need to be connected.
14
INSTALLATION

Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder

Rear Panel
Connect one of these cables:
Optical In
Coaxial In
AUDIO/VIDEO MULTI-CHANNEL
Optical Digital Audio Cable
Coaxial Digital Audio Cable
RECEIVER
Receiver/Amplifier with Dolby Digital or DTS Decoder
Method 6 – Digital Audio Connection
Please use either a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF optical digital audio cable to connect one of the digital audio outputs to the corresponding input terminal on your A/V receiver.
NOTE
Due to bandwidth limitations, high resolution audio formats such as Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio cannot be sent through the coaxial or optical digital audio output. A reduced resolution version of the same audio track will be output instead. To listen to high resolution audio formats in their best quality, please use the HDMI connection if you have a receiver that handles HDMI audio (see page 13) or use the multi-channel analog outputs if you do not (see page 14).
Due to copyright restrictions, SACD audio cannot be sent through the coaxial or
optical digital audio output. To listen to SACD, please use the HDMI or analog audio connections.
Due to copyright restrictions and bandwidth limitations, full resolution audio from DVD-
Audio discs cannot be sent through the coaxial or optical digital audio output. To listen to DVD-Audio in full resolution, please use the HDMI or analog audio connections.
15
INSTALLATION

Connecting to a Stereo Audio System

Rear Panel
L
Audio Interconnect Cable
Stereo Audio System
AUDIO IN
AUDIO/VIDEO MULTI-CHANNEL
R
RECEIVER
Method 7 – Stereo Analog Audio Connection
If your audio system only offers stereo audio inputs, or if you would like to connect a dedicated stereo system in addition to the surround system, you can connect it to the STEREO AUDIO OUT terminals of the player.
NOTE
The STEREO AUDIO OUT terminals will always provide a down-mixed stereo signal from multi-channel sources. The “Down Mix” and other speaker settings in the Audio Processing Setup Menu (see page 60) do not affect the STEREO AUDIO OUT.
16
INSTALLATION

Connecting to the Internet

The OPPO BDP-83 Blu-Ray Disc Player supports the BD-Live feature offered on some Blu-ray Disc titles. BD-Live offers extra downloadable content and additional online interactive programs. The available BD-Live contents vary by discs and studios, and may include additional subtitles, commentaries, movie trailers, games, and/or online chat.
Connecting the player to the Internet will also allow the player to obtain firmware updates via the Internet. (See pages
In order to utilize the BD-Live feature or update firmware via the Internet, the player needs to be connected to a broadband Internet connection. You must have access to a working broadband Internet service connection. It is not necessary to connect to the Internet if you do not intend to use the BD-Live and online firmware updating functionality.
4 and 67 for more information regarding firmware updates.)
Rear Panel
Broadband Internet Connection
Internet
WAN 1 2 LAN 3 4
Broadband Router/Modem
Network Cable (Ethernet)
Plug one end of a network cable (Category 5/5E straight Ethernet cable) into the LAN port on
the back of the OPPO Blu-ray Disc player.
Plug the other end of the network cable into a LAN port on the broadband router or modem.
After physically connecting the player to a broadband Internet connection, some network
configuration may be required. Please refer to the
Network Setup section on page 68 of the
manual for details.
If you would like to connect the player to a broadband Internet connection via a wireless LAN
router, please use an Ethernet/wireless LAN media converter (also called a wireless bridge or a gaming adapter). Refer to the operating instructions supplied with the media converter for details on how to configure it.
Refer to the operating instructions supplied with the broadband router or modem, or contact the
Internet service provider for questions related to setting up the router or modem.
NOTE
Only connect the LAN port of the player to an Ethernet port that supports 10BASE-T or 100BASE-TX. Connecting to any other ports or jacks, such as a phone jack, can damage the player.
17
INSTALLATION
r

Custom Installation

External IR (Infrared Remote) Installation

The OPPO BDP-83 Blu-Ray Disc Player features IR IN and IR OUT ports on its back panel. If the player is to be installed in an equipment cabinet where direct line-of-sight is not available for remote control, your custom home theater installer can purchase an External IR Remote Sensor (OPPO part number IR-ES1) and plug it into the IR IN port. Place the sensor head at a location where there is direct line-of-sight to ensure reliable operation. The External IR Remote Sensor is available from your dealer or directly from OPPO Digital, Inc.
If you have another OPPO device that features an IR IN port, the IR OUT port on the BDP-83 can pass through remote control signal to the next OPPO device. For example, if you use an OPPO HM-31 Advanced 3x1 HDMI Switch to expand the HDMI inputs on your TV, the IR IN port of the HM-31 can be connected to the IR OUT port of the BDP-83 using a 3.5mm stereo cable.
BDP-83 Back Panel
3.5mm Stereo Cable
OPPO HM-31 HDMI Switch
NOTE
OPPO cannot guarantee that the IR IN and IR OUT ports will be compatible with devices that are not manufactured by OPPO.
Connecting the IR IN or IR OUT port to an incompatible device may result in damage to the connected device or the player.
Please contact OPPO customer support if you plan to integrate the player into an IR distribution system. Customer support can provide recommendations on how to properly connect the control signals.
IR Sensor
IR IN Signal Identifications
3.5mm stereo plug
Tip: +5V from the playe Ring: IR carrier signal Sleeve: Ground
18
INSTALLATION

Setting Up the Player - Easy Setup Wizard

Access the Easy Setup Wizard

When the player is turned on for the first time, an Easy Setup Wizard screen will appear. It is a series of guided instructions designed to configure the basic settings for the player.
To start the Easy Setup Wizard, please follow these steps:
1) Turn on the TV.
2) Turn on the player.
3) Switch the input selection on your TV so that the TV displays the signal from the player. You
should see the first step of the Easy Setup Wizard.
If the Easy Setup Wizard has previously been completed or cancelled, it will no longer initiate when you turn on the player. Instead, you will see the background screen with the OPPO and Blu-Ray Disc logos. To
access Easy Setup Wizard, please press the SETUP button on the remote control, select Devi ce Setup, then
Reset Factory Default. Select “OK” to confirm
Easy Setup
Step: 1/6
The Easy Setup Wizard will help you configure the basic settings for this player. More detailed settings can be accessed at the Setup Menu at any time after finishing or exiting the wizard.
Press OK to initiate the Easy Setup Wizard, press Cancel to exit this Wizard immediately.
loading the factory default settings. Once the factory default settings are loaded the Easy Setup Wizard will appear.
The first step of the Easy Setup Wizard gives you the opportunity to skip the entire wizard. If you are familiar with setting up audio/video equipment and would like to customize the player settings using
its Setup Menu, you may use the LEFT/RIGHT ARROW buttons to select the “Cancel” option, then press the ENTER key to exit the Easy Setup
Wizard. Otherwise, to continue with the Easy
Setup Wizard, select the “OK” option and press the ENTER key.

Choose the Primary Video Output

The player can output video through its HDMI and
Easy Setup
Step: 2/6
Choose the primary video output that you use.
Better performance will be provided over an HDMI connection.
Previous Next
HDMI
Component
To make your selection, use the UP/DOWN ARROW buttons to highlight the choice, and then press the ENTER button to go to the next step.
component output terminals. (Composite video output is also available but not recommended.) By
setting the “Primary Video Output” option, the
player can optimize video output of the selected
terminal. The choices are “HDMI” and “Component”. If you connect the player to the TV
using an HDMI cable (Method 1 on page Method 2 on page
11, or Method 4 on page 13),
please select “HDMI”. If you connect the player to
the TV using component video cables (Method 3 on page
12), please select “Component”. Please
note: the best performance will be provided over the HDMI connection.
19
10,
INSTALLATION

Select the Best Output Resolution

One of the major advantages of the OPPO Blu-Ray Disc Player is its ability to play high-definition Blu-Ray video and also up-convert standard definition video stored on DVD discs to high definition. The sophisticated video processor inside the player ensures that the video will have the best possible color, detail and motion. The player offers several standard and high definition video output resolutions. To get the best visual result, it is important to select an output resolution that best matches your TV or display device.
The rule of thumb when selecting an output resolution is to match the “native resolution” of your TV or display device as closely as possible. The “native resolution” is the resolution of the actual display component in the TV, such as the Plasma panel, LCD panel, or DLP™ chip. The TV may accept input signals with lower or higher resolutions than its native resolution. In such cases the electronics in the TV will up-scale or down­scale the video to fit its display component. Unfortunately many TVs on the market only do an average job scaling the video. On the other hand, if you set the OPPO Blu-ray Disc Player to output a resolution that matches or is very close to the native resolution of the TV, you are more likely to get a great picture.
For the latest generation of 1080p, “Full HD” or “True HD” displays, the best output resolution will naturally be 1080p. (A few early model 1080p displays do not accept 1080p signal. For these displays the best output resolution to use is 1080i.) For all other digital televisions this will likely be 720p. For CRT tube or rear projection televisions this will likely be 1080i. For EDTV displays (very rare if they have HDMI or DVI) this will be 480p. These are general recommendations that work for most users, but there can be exceptions. Advanced users may want to try all supported resolutions and choose the one that provides the best visual result.
The OPPO Blu-ray Disc Player supports a special “Source Direct” output resolution on its HDMI output. This
resolution is recommended for use with external video processors or high-end TVs. In “Source Direct” mode, the player works as a “transport”. It decodes video from the discs and then sends the raw video signal in its native resolution and format, without extra processing, to the external video processor or TV. The actual output resolution varies by content:
Content Source Direct Output Resolution
NTSC DVD 480i PAL DVD 576i Most Blu-ray Movies (film-source) 1080p 23.976Hz or 1080p 24Hz Most Blu-ray TV shows or Concerts
1080i (video-source) SACD and DVD-Audio 1080i
Depending on your selection of “Primary Video
Easy Setup
Output”, the available output resolution selections
will differ. For the HDMI output, the following
Step: 3/6
Choose the output resolution which best matches your TV.
Change will be applied immediately. You will have 15 seconds to either save the new setting or rollback to the previous output resolution.
Auto
1080p
1080i
720p
480p/576p
480i/576i
Source Direct
output resolutions are available: Auto, 1080p, 1080i, 720p, 480p/57 6p, 480i/57 6i, and Sour ce Direct. If “Auto” is selected, the player will
determine its output resolution based on the best signal resolution that the TV can display.
For the component output, the following output
resolutions are available: 1080i, 7 20p, 480p/576p and 480i/576i. Please refer to the specification of
Previous Next
your TV to find the best resolution to use.
20
INSTALLATION
C
e
o
r
k
Easy Setup
Step: 3/6
Choose the output resolution which best matches your TV.
hang
15 sec
ollbac
Previous Next
Confirm Output Resolution
The output resolution has been changed.
15s
Select OK to save the new setting. Select Cancel to rollback to the previous output resolution.
NOTE
In case you are not able to get a picture using the HDMI or component output, please connect the player to the TV using the composite video output, and then use the Setup Menu to adjust the player settings.
Video up-conversion over the component output is only available for unencrypted discs such as home video and consumer-created contents. Most commercially pressed DVD discs are CSS-encrypted and will be limited to 480i/480p resolution. This restriction applies to the component output only. The HDMI output is protected with HDCP and has no such restriction.
Auto
1080p
1080i
720p
480p/576p
480i/576i
Source Direct
Press the UP/DOWN ARROW buttons to select
the desired output resolution, then press the
ENTER button. The player will apply the selected
output resolution and ask you to confirm the selection. If your TV supports the selected resolution, you will see a dialog box with a count-
down clock. Use the LEFT ARROW button to highlight the “OK” option and press the ENTER
button to save the resolution setting. If your TV does not support the selected resolution, you may see a black screen or an error message. In this case please wait for 15 seconds and the Easy Setup screen will reappear. Select a different resolution that your TV can support.

Determine the Display Aspect Ratio

Standard Definition, or 4:3 TV
Wide screen, or 16:9 TV
The aspect ratio is the proportional ratio of a TV screens width and height. Older television sets generally have a 4:3 aspect ratio – the width is 4/3 (or 1.33) times the height. Newer wide screen television sets have a 16:9 aspect ratio – the width is 16/9 (or 1.78) times the height. For best performance, the video output of your player needs to match the screen aspect ratio of your TV. Since almost all Blu-ray Discs and many DVD discs are released in the wide screen format, it is highly recommended that you use a wide screen TV with the player.
The Aspect Ratio selections are 4:3 Letterbox, 4:3 Pan & Scan, 16:9 Wide, and 16:9 Wide/Auto.
Depending on your selection and the video format recorded on the discs, image appearance on the TV screen can be one of the following:
21
INSTALLATION
TV Screen Appearance
Original Content
4:3
16:9
Pan & ScanLetterbox
Wide Wide/Auto
16:94:3
If you have a 4:3 or standard definition screen, select one of these options:
4:3 Letterbox – 4:3 TV Letterbox. Choose when the display is 4:3. Widescreen image is displayed in “letterbox” format with black borders on top and bottom (preferred).
4:3 Pan & Scan – 4:3 TV Pan and Scan. Choose when the display is 4:3. Both sides of a
widescreen image are clipped (you lose about 30% of the picture).
If you have a widescreen (16:9) display, select one of these options:
16:9 Wide – 16:9 (widescreen) sources will be displayed in their native aspect ratio, and 4:3
sources will be horizontally stretched.
16:9 Wide/Auto – 16:9 (widescreen) as well as 4:3 sources will be displayed in their native
aspect ratio. Please note that in this mode 4:3 sources will be displayed with black borders on both left and right sides to maintain the correct 4:3 aspect ratio.
Press the UP/DOWN ARROW buttons to select
Easy Setup
the proper aspect ratio for your TV, then press the
ENTER button.
Step: 4/6
Choose the desired Aspect Ratio for your TV.
4:3 Letterbox: For 4:3 TV. Wide screen content will be displayed in a letterbox. 4:3 Pan & Scan: For 4:3 TV. Wide screen content may be cropped on the sides. 16:9 Wide: For 16:9 TV. 16:9 Wide/Auto: For 16:9 TV. 4:3 content will be displayed with side borders.
4:3 Letterbox
4:3 Pan & Scan
16:9 Wide
16:9 Wide/Auto
Previous Next
22
INSTALLATION

Select the Audio Setting

The Blu-ray Disc format brings not only high resolution video, but also high bit rate audio such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio. Blu-ray Discs may also include additional audio features such as menu click sound and Secondary Audio Program (SAP – audio associated with the secondary video in Picture-in-Picture mode). Depending on the user preferences and other audio/video equipment connected to the player, the audio settings need to be adjusted to achieve the best result. The Easy Setup Wizard offers two basic selections to get you started.
The “Compatible” setting configures audio output
Easy Setup
Step: 5/6
Select the audio setting.
Compatible: For televisions and receivers with HDMI 1.1/1.2 or Optical/Coaxial connections. Advanced: For HDMI 1.3 receivers only. Secondary audio program is turned off by default.
Audio settings can be further customized in the setup menu.
Previous Next
Compatible
Advanced
a receiver supporting HDMI 1.3 and high bit rate audio formats, selecting the “Advanced” setting is
recommended. Menu click sound and Secondary Audio Program are turned off by default to preserve the original quality of the main audio content.
in a way that is generally compatible with all types of equipment and content. If you connect the player to a television directly, or to a receiver with an HDMI 1.1/1.2 or optical/coaxial input, selecting
the “Compatible” setting is recommended. When
menu click sound and Secondary Audio Program are presented in the content, those will be mixed into the audio output.
The “Advanced” setting configures audio output to
send the original main audio content to a connected receiver for decoding and reproducing. It requires a receiver capable of decoding all high bit rate audio formats. If you connect the player to
Press the UP/DOWN ARROW buttons to select one of the audio setting choices, and then press the ENTER
button. The two basic audio setting choices may not cover all situations. You can further customize the audio settings using the player’s Setup Menu.

Complete the Easy Setup Wizard

Once you have selected the audio setting, the
Easy Setup
Step: 6/6
Easy Setup Wizard completed.
Press the Enter button to exit.
Previous Finish
initial Easy Setup Wizard is completed.
Press the ENTER button to close the Easy Setup
Wizard. You player is now ready for use. You will see a background screen with an OPPO and Blu-
ray Disc logo. Please follow the rest of the User Manual for basic and advanced operations. Enjoy
your new OPPO Blu-ray Disc Player!
23

BASIC OPERA TIONS

Disc Playback

DVD-A
1 Press the POWER button to turn on the player.
POWER
OPEN
2 Press the OPEN/CLOSE (OPEN) button to eject the disc tray.
3 Place the disc with the label side facing up and the recorded
side facing down.
4 Press the OPEN/CLOSE (OPEN) button again to retract the
tray. 5 The player will read the disc information and starts playback. 6 Depending on the content of the disc, a menu or navigation
screen may appear. Please use the navigation ARROW and
SELECT buttons to select the content to play.
STOP
PLAY
7 To stop playback, press the STOP button. 8 To turn off the player, press the POWER button.
NOTE
During DVD and some Blu-ray Disc playback, pressing the STOP button for the first time
brings the player to a pre-stop mode. You can resume playback from the stopped point
by pressing the PLAY button. This pre-stop mode allows you to change the player settings and then resume playback. To completely stop playback, press the STOP
button twice.
Certain Blu-ray Discs with BD-Java technology do not support the pre-stop mode.
Pressing the STOP button during playback of such discs will completely stop the disc. Pressing the PLAY button once the disc is stopped will restart it from the very beginning.
This unit consumes a tiny amount of power even when it is turned off to STANDBY mode. If it is not to be used for a long time, unplug it from the household AC outlet.
SACD

Fast Playback

REV
FWD
DVD-A
You may fast forward or reverse during playback.
1. Press the FWD button on the remote control and the player starts fast forward playback. Each press of the FWD button
switches the playback speed in the following sequence:
12
345
24
SACD
BASIC OPERATIONS
2. Press the REV button on the remote control and the player starts fast reverse playback. Each press of the REV button switches the playback speed in the following sequence:
12
345
NOTE
Certain Blu-ray Discs utilizing the BD-Java technology may have their own fast forwarding and reversing control. The actual speed varies by disc, and a progress scale may be displayed by the disc.

Pause and F rame-by-Frame

DVD-A
SACD
1. During playback, press the PAUSE button to temporarily pause
the program. In this mode, a PAUSE icon will appear on the TV screen.
2. While a DVD or Blu-ray Disc is paused, press the PREV or
PLAY
PREV
PAU SE
NEXT
NEXT button to reverse or advance the video frame-by-frame.
3. Press the PLAY button to resume normal playback.
NOTE
If the screen saver is set to “On” or “Energy Saver” (please refer to page 52 for details), after pausing for 3 minutes the player will activate the screen saver.

Slow Playback

To play the video in slow-motion, please use the following steps.
1. Press the PAUSE button on the remote control to pause the
playback first.
PLAY
REV
PAU SE
FWD
2. Press the FWD button to select a forward slow playback speed. Each press of the FWD button switches the playback speed in
the following sequence:
1/16 1/8
1/41/2
3. Press the REV button to select a reverse slow playback speed. Each press of the REV button
switches the playback speed in the following sequence:
1/16 1/8
1/41/2
4. To exit the slow playback mode, press the PLAY button.
NOTE
Certain Blu-ray Discs utilizing the BD-Java technology may not support slow playback.
25
BASIC OPERATIONS

Blu-ray Disc Menu Playback

ARROW
BUTTONS
COLOR
BUTTONS
TOP
MENU
POP-UP MENU
ENTER
1. Blu-ray Discs usually contain a Top Menu and a Pop-up
2. During playback, press the POP-UP MENU button to
3. Navigate the menu using the ARROW buttons, and then
4. Some menus make use of the COLOR buttons. You can

DVD Menu Playbac k

(TITLE)
ARROW
BUTTONS
TOP
MENU
POP-UP MENU (MENU)
ENTER
RETURN
1. Some DVD discs contain title menu or chapter menu
2. During playback, press the TOP MENU button to return to
3. Navigate the menu using the ARROW buttons, and then
4. Press the RETURN button to return to the previous menu.

On-Screen Display

Menu. The Top Menu normally appears at the beginning of the playback, after the previews and copyright messages. The Pop-up Menu can be accessed during the movie without interrupting playback.
access the Pop-up Menu. Press the TOP MENU button to
access the Top Menu.
press the ENTER button to make the selection.
select menu functions by pressing the corresponding
COLOR button on the remote control.
DVD-A
functions.
the disc title menu. Press the POP-UP MENU button to
display the chapter menu. Depending on the disc, one or both menus may not exist.
press the ENTER button to make the selection.
The return location varies by disc.
DVD-A
SACD
1. During the playback of a DVD or Blu-ray Disc, press the DISPLAY
PAG E UP/DOWN
DISPLAY
button on the remote control to show status information; For CD and SACD, the status information is shown automatically.
2. While the status information is shown, press the PAGE UP/DOWN buttons to scroll through several display formats. The
playback time information displayed on the front panel changes together with the on-screen display.
3. Press the DISPLAY button again to hide the on-screen display.
The playback time information display on the front panel will remain in the selected format.
The following display formats are available:
DVD and Blu-ray Disc:
- Title elapsed time
- Title remaining time
CD and SACD:
- Track elapsed time
- Track remaining time
26
- Chapter elapsed time
- Chapter remaining time
- Disc elapsed time
- Disc remaining time
BASIC OPERATIONS
In addition to the playback time, the on-screen display may also contain the following information about the content currently playing:
Playback status: an icon indicating play, pause, and fast forward/reverse status.
Bit rate meter: an indication of the bit rate of the audio and video stream.
Current and total title numbers. (DVD and Blu-ray Discs)
Current and total title chapters. (DVD and Blu-ray Discs)
Current and total tracks. (CD and SACD)
Audio information: current and totally available number of audio tracks, language, format, and
channels.
Subtitle information: current and totally available number of subtitle tracks and language.
Video format information: encoding type, frame rate and original aspect ratio.

V olume Control

DVD-A
SACD
1. For normal audio volume adjustment, it is recommended that you use the volume control on your TV or receiver/amplifier.
2. The VOL +/- buttons on the player remote control is provided
as an alternative way of controlling the audio volume. It is recommended that you use this control to make the audio
VOL -
VOL +
volume from the player the same as from other sources, such as TV programs or a VCR.
Press the VOL – button to decrease the volume.
Press the VOL + button to increase the volume.
NOTE
The volume control does not apply to digital audio output in raw bitstream format. However when the volume is decreased to 0, all audio output will be muted.

Mute

DVD-A
1. Press the MUTE button on the remote control during content
playback to turn off audio output. The TV screen displays a mute icon. The front panel MUTE indicator will also light up.
2. Press the MUTE button again to resume audio output.
MUTE
SACD
NOTE
Check the MUTE status on the front panel display of the player when there is no audio
output. You may also press the MUTE button to verify the MUTE status.

Audio Language/Track Selection

1. To select the audio language or track, press the AUDIO button on
the remote control during playback.
AUDIO
2. Repeat pressing the AUDIO button to circle through all available
language or audio tracks.
27
DVD-A
SACD
BASIC OPERATIONS
NOTE
Availability of languages and audio channels varies by disc. Some DVD-Audio discs allow
audio track selection with the AUDIO button, while others require the user to select from the
audio setup menu of the disc. When playing an SACD with both multi-channel and stereo
contents, the AUDIO button can be used to switch between the two formats.

Subtitle Selection

1. When playing a DVD, Blu-ray Disc or other video programs
recorded with subtitles, press the SUBTITLE button on the
SUBTITLE
remote control to select the desired subtitle.
2. Repeat pressing the SUBTITLE button to circle through all
available subtitles.
3. To turn off subtitles, repeat pressing the SUBTITLE button until
the subtitle is turned off.

Angle Selection

1. When playing a DVD or Blu-ray Disc, an angle mark will be displayed on the screen when the player detects scenes
ANGLE
recorded with multiple angles:
The angle mark is also presented on the front panel display.
2. Press the ANGLE button on the remote control to select the desired playing angle.
3. To resume normal playback, repeat pressing the ANGLE button until the default angle is
displayed.
NOTE
This function is available only when the discs are recorded with multiple angles.
The angle mark on the screen can be turned off using the Setup Menu of the player. (see
page 46)

Picture-in-Picture and Secondary A udio

1. Certain Blu-ray Discs contain secondary video (Picture-in­Picture, or PIP) and secondary audio. This feature is often
called BONUSVIEW. When such a disc is played, a
SAP
PIP
Picture-in-Picture mark (PIP Mark) and a Secondary Audio Program mark (SAP Mark) may be displayed on the screen to alert you to the availability of the secondary audio/video content.
28
BASIC OPERATIONS
2. The disc menu usually features interactive controls to turn on/off the Picture-in-Picture video and Secondary Audio Program. Please use those controls to select the desired secondary audio/video content.
3. There is a PIP button on the remote control. If the disc menu does not offer interactive Picture-
in-Picture controls, please use this button to turn on/off Picture-in-Picture or select from multiple secondary video programs.
4. There is also a SAP button on the remote control. If the disc menu does not offer interactive
secondary audio controls, please use this button to turn on/off Secondary Audio Program or select from multiple secondary audio tracks. Secondary Audio Programs are generally only available when Picture-in-Picture is shown.
NOTE
This function is available only when the discs are recorded with secondary video and audio programs.
Discs may not always be played back according to the PIP and SAP buttons. Certain
discs can ignore or override the remote control commands.
The PIP and SAP Marks on the screen can be turned off using the Setup Menu of the player. (see page 46)

BD-Live

Some Blu-ray Disc titles are released with the BD-Live feature. BD-Live offers extra downloadable contents and additional online interactive programs. The available BD-Live
contents vary by discs and studios, and may include additional subtitles, commentaries, preview trailers, games, and online chat. The player needs to be connected to the Internet in order to play BD-Live contents. (See page
17)
Depending on how the studios organize their BD-Live contents, some Blu-ray Discs may start downloading BD-Live contents when playback starts; some have a BD-Live selection on its main menu; some may show a prompt to ask whether you would like to start downloading; and some may ask you to sign up for a membership or account. Please follow the instructions that come with the disc to enjoy BD-Live contents.
Your Internet connection speed, the overall Internet traffic situation and the capacity of the BD-Live content servers can all affect how fast BD-Live contents can be downloaded. If you encounter slow downloading or intermittent playback, please play the disc without accessing the BD-Live features, or try again at a different time.
When you use the BD-Live feature, the player or disc ID and your IP (Internet Protocol) address may be sent to the content provider via the Internet. Generally, no personally identifiable information is sent. However technologies exist to match your IP address to a certain geographical area or service provider. Your Internet service provider also has the knowledge of who is using which IP address. If the BD-Live content provider requires you to login using a membership or account, the content provider will have access to your membership or account information. Please check with your Internet service provider and the BD-Live content providers for their privacy policy.
You can choose to restrict BD-Live access using the player’s Setup Menu (See page
68).
29

AD V ANCED OPERA TIONS

TV System Selection

While you may want to set the video output system (NTSC/PAL) to the same as that supported by your TV, realize that the OPPO Blu-ray Disc Player will convert any content that is not in the correct format your TV understands. The
P/N
Some points to keep in mind:
When the video output is set to PAL or NTSC system, the player will convert the disc content to the selected system.
When the video output is set to “Multi”, the player will not perform system conversion. The “Multi” mode is only to be used if your TV supports both NTSC and PAL systems.
Most TV sets only support one of the NTSC or PAL systems. If the wrong output is selected,
the TV may not display a picture. In this case repeatedly press the P/N button until a supported
system is selected.
The output system selected with the P/N button will be remembered when the player is turned off. The output system selection can also be done by setting the “TV System” item in the “Video Setup” section of the player’s Setup Menu. (Refer to page
default output is NTSC for North America.
Press the P/N button on the remote control to cycle the video output to PAL,
NTSC or “Multi” system. The TV screen displays the selected system name.
48 for details.)

Output Resolution

The OPPO BDP-83 Blu-ray Disc Player supports multiple output resolutions. For detailed discussion on how to choose the best output resolution, please refer to the section on page
RESOLUTION
1. Make sure the video cable is properly connected.
2. Turn on the TV. Adjust the TV to use the proper input (HDMI, DVI or Component).
3. Make sure that the player is turned on. Although the output resolution can be changed “on the fly”, it is recommended that you stop playback and take out the disc before changing the output
resolution. Press the RESOLUTION button. A “Resolution Setting” menu appears on the TV
screen. In case the TV does not support the current resolution and you cannot see the “Resolution Setting” menu, the current resolution is also displayed on the front panel.
4. Use the UP/DOWN ARROW buttons to select the new output resolution. You may also press the RESOLUTION button multiple times to cycle through the available output resolutions. The
new resolution is displayed on the front panel just in case you cannot see the “Resolution Setting” menu.
5. Press the ENTER button to apply the selected output resolution. Or, if you do not want to change the output resolution, press the RETURN button to exit.
If you would like to change the output resolution, you may do so by
pressing the RESOLUTION button on the remote control:
20 of this manual.
Select the Best Output Resolution
30
ADVANCED OPERATIONS
The following output resolutions are available:
NTSC output via HDMI:
Auto Æ 1080p(60Hz/24Hz) Æ 1080i 60Hz Æ 720p 60Hz
Æ 480p Æ 480i Æ Source Direct
PAL output via HDMI:
Auto Æ 1080p(50Hz/24Hz) Æ 1080i 50Hz Æ 720p 50Hz
Æ 576p Æ 576i Æ Source Direct
NTSC output via component:
1080p 60Hz* Æ 1080i 60Hz Æ 720p 60Hz Æ 480p Æ 480i
PAL output via component:
1080p 50Hz* Æ 1080i 50Hz Æ 720p 50Hz Æ 576p Æ 576i
* When 1080p is selected for the component output, HDMI output resolution will be 1080p and component output resolution will be 1080i.
NOTE
Some TV sets do not support one or more output resolutions (particularly 1080p). If an incompatible output resolution is selected, you will get a blank screen or an error message. In this case please select an output resolution that is supported by the TV.
In case you are not able to get a picture using the HDMI or component output, please connect the player to the TV using the composite video output, then use the Setup Menu to adjust the player settings.
Video up-conversion over the component output is only available for unencrypted discs such as home video and consumer-created contents. Most commercially pressed DVD discs are CSS-encrypted and will be limited to 480i/480p resolution. This restriction applies to the component output only. The HDMI output is protected with HDCP and has no such restriction.

Zooming and Aspect Ratio Control

This feature zooms in or out of the displayed frame and also changes the aspect ratio (image width vs. height).
ZOOM
To change the zoom level, press the ZOOM button on the remote control. Each press of the ZOOM button will switch the zoom level in sequence.

Zoom Levels for HDMI Output

The following zoom levels are available when “Primary Output” is set to “HDMI”:
1:1 (No zooming) Æ Stretch/Letterbox/Pillar Box Æ Full Screen
Æ Under Scan Æ 1.2 Æ 1.3 Æ1.5 Æ 2.0 Æ ½ ÆBack to 1:1 again
The zoom level is reset to 1:1 when the disc is ejected, or when the player is turned off.
DVD-A
31
ADVANCED OPERATIONS
The available zoom levels depend on the “TV Aspect Ratio” setting in the Setup Menu and the aspect
ratio of the DVD or Blu-ray Disc. The following zoom levels may be useful for some special applications:
1) Playing 16:9 BD or DVD when “TV Aspect Ratio” is set to “16:9 Wide” or “16:9 Wide/Auto
Stretch – The image is vertically stretched by 1.33 times. For movies with 2.35:1 aspect ratio, this zoom level cuts off the black borders at the top and bottom of the image. Users of projector with anamorphic lens may find this mode helpful.
Original 2.35:1
Widescreen Movie
“Stretch” Zoom Projected through
an Anamorphic Lens
Full Screen – The image is stretched by 1.33 times for both vertical and horizontal directions. For movies with 2.35:1 aspect ratio, this zoom level cuts off the black borders at the top and bottom of the image while maintaining the correct aspect ratio. The left and right sides of the image are slightly cropped.
Original 2.35:1 Widescreen Movie “Full Screen” Zoom
2) Playing 4:3 BD or DVD when “TV Aspect Ratio” is set to “16:9 Wide”
1:1 - The image fills up the entire 16:9 screen but is horizontally stretched. Figures may look shorter and wider than they should be.
Pillar Box – The player maintains the correct 4:3 aspect ratio and adds borders to the left and
right sides of the image. The brightness level of the borders can be set by the “Border Level” setting in the “Picture Adjustment” section of the Setup Menu.
Full Screen – This zoom level maintains the correct aspect ratio but crops the top and bottom slightly in order to fit the 4:3 image to the 16:9 screen.
1:1 “Pillar Box” Zoom “Full Screen” Zoom
32
ADVANCED OPERATIONS
3) Playing 4:3 BD or DVD when “TV Aspect Ratio” is set to “16:9 Wide/Auto”
1:1 – The player maintains the correct 4:3 aspect ratio and adds borders to the left and right sides of the image.
Stretch – The image is horizontally stretched by 1.33 times. This zoom level fills up the 16:9 screen, but figures may look shorter and wider than they should be.
Full Screen – This zoom level maintains the correct aspect ratio but crops the top and bottom slightly in order to fit the 4:3 image to the 16:9 screen.
1:1 “Stretch” Zoom “Full Screen” Zoom
NOTE
Some early DVD titles (released from 1997 until early 2000’s) use a 4:3 non-anamorphic widescreen aspect ratio. When played on a 16:9 display, the content is shown in a small window with black borders on all four sides. The top and bottom borders are encoded into the video. The left and right borders are added by the player to maintain the correct aspect ratio. For this type of discs the “Full Screen” zoom mode can be used to eliminate the borders.
4) Playing 16:9 BD or DVD when “TV Aspect Ratio” is set to “4:3 Pan/Scan
1:1 – The player disregards the aspect ratio and fills the 4:3 screen. Figures may look taller and narrower than they should be.
Letterbox – The player maintains the correct 16:9 aspect ratio and adds borders to the top and bottom of the image.
Full Screen – The player maintains the correct aspect ratio but crops the left and right slightly in order to fit the 16:9 image to the 4:3 screen.
1:1 “Letterbox” Zoom “Full Screen” Zoom
33
ADVANCED OPERATIONS
5) Playing 16:9 BD or DVD when “TV Aspect Ratio” is set to “4:3 Letter box”
1:1 - The player maintains the correct 16:9 aspect ratio and adds borders to the top and bottom of the image.
Stretch – The player disregards the aspect ratio and fills the 4:3 screen. Figures may look taller and narrower than they should be.
Full Screen – The player maintains the correct aspect ratio but crops the left and right slightly in order to fit the 16:9 image to the 4:3 screen.
1:1 “Stretch” Zoom “Full Screen” Zoom
6) Playing 4:3 BD or DVD when “TV Aspect Ratio” is set to “4:3 Pan/Scan” or “4:3 Letterbox”
Stretch – The image is vertically stretched by 1.33 times. For widescreen movies published in 4:3 non-anamorphic format, this zoom level cuts off the black borders at the top and bottom of the image. Figures may look taller and narrower than they should be.
Full Screen - The image is stretched by 1.33 times for both vertical and horizontal directions. For widescreen movies published in 4:3 non-anamorphic format, this zoom level cuts off the black borders at the top and bottom of the image while maintaining the correct aspect ratio. The left and right sides of the image are slightly cropped.
Original 4:3 Non-anamorphic
“Stretch” Zoom “Full Screen” Zoom
Widescreen Movie
The “Under Scan” zoom level shrinks the image by 5%. This zoom level may be used to compensate for TVs that over scan, so the viewer can see the entire image area with no cropping. All other zoom levels are indicated by their respective zoom ratio.

Zoom Levels for Component Video Output

The following zoom levels are available when “Primary Output” is set to “Component”:
1.0 (No zooming) Æ 2X Æ 3X
Æ 4X Æ ½ Æ Æ ¼ ÆBack to 1.0 again
NOTE
The ZOOM feature may not be available when certain DVD or Blu-ray Discs are played because the disc author chooses to disable ZOOM.
34
ADVANCED OPERATIONS

Repeat Playbac k

To repeat a certain chapter, title, track or disc, press the REPEAT button on the
remote control.
DVD-A
SACD
REPEAT
Each press of the REPEAT button switches the repeat mode in the following
sequence:
DVD and DVD-Audio:
Repeat Chapter Repeat Title Repeat OffRepeat All
Blu-ray Disc:
Repeat Chapter Repeat Title Repeat Off
CD and SACD:
Repeat One Repeat All Repeat Off
NOTE
Certain Blu-ray Discs may not allow for repeating.

Repeat a Selected Section

DVD-A
To repeatedly play a specified section, please follow these steps:
1. During normal playback, press the AB REPLAY button on the
AB REPLAY
remote at the desired beginning point (Point A) for the repeat play. The TV screen displays “A-”.
2. When playback reaches the desired ending point (Point B) for the repeat play, press the AB REPLAY button again. The player now repeatedly plays back the specified section (A-B). The
TV screen displays “A-B”.
3. Press the AB REPLAY button for the third time to resume normal playback.
SACD
NOTE
Not available for all disc formats or contents. Certain Blu-ray Discs may not allow for repeating.

Shuffle and Random Playback

When playing a CD or SACD, press the BLUE button on the remote control to activate the Shuffle and Random modes. Each press of the BLUE button
BLUE
switches the playback mode in the following sequence:
Shuffle Random Normal
35
SACD
ADVANCED OPERATIONS
In normal playback mode, each track is played back in sequential order. As the name implies, the
Random playback mode randomly selects a track to play. The Shuffle mode also plays back the tracks
in random order, but it ensures that each track is played only once.
Selecting the Shuffle or Random mode cancels any Repeat mode you may be using. Similarly, selecting a Repeat mode cancels any Shuffle or Random mode.

Playback by Chapter or Track Number

DVD-A
SACD
NUMBER
BUTTONS
remote control to directly jump to a specified chapter or track number. For example:
To select the seventh track, press the [7] button.
During the playback of a disc, you can use the NUMBER buttons on the
To select the 16
th
track, press [1] followed by [6] in quick
succession:
+
NOTE
Certain DVD-Audio and Blu-ray Discs may not allow for direct chapter selection.

Playback from a Specific Location

DVD-A

DVD and Blu-ray Discs

During the playback of a DVD or Blu-ray Disc, you may specify a location to start playback by entering the title, chapter or time
directly. Press the GOTO button to bring up the on-screen display.
1 / 7 5 / 25 00:22:14 00:40:06
NUMBERS
GOTO
ARROWS
PAG E UP/DOWN
DISPLAY
ENTER
1. Title time search. For example, search for a specified time within the currently playing title.
Press the GOTO button to bring up the on-screen display. The cursor will be positioned at the Time Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes and seconds for your specified search and press the ENTER button.
On top of the video screen, the on-screen display information has the following components: (from left to right) Playing Status, Title, Chapter, Time Counter, Progress Indicator, and Total Time. After
pressing the GOTO button for the first time, the cursor will be
positioned at the Time Counter. This is the “Time Search” mode.
Each subsequent press of the GOTO button switches the search
mode in the following sequence:
Time Search Chapter Search
Title SearchDisplay
1 / 7 5 / 25 00:22:14 00:40:06
SACD
36
ADVANCED OPERATIONS
2. Chapter time search. For example, search for a specified time within the currently playing
chapter.
Press the DISPLAY button to bring up the on-screen display. Use the PAGE UP or PAGE DOWN button to switch the display to chapter time mode. You will see that the icon to the
left of the Time Counter change from the Title icon to the Chapter icon. Press the GOTO button to position the cursor at the Time Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes and seconds for your specified search and press the ENTER
button.
1 / 7 5 / 25 00:06:48 00:08:33
3. Chapter search. For example, search for Chapter 7 of the currently playing title.
Repeatedly press the GOTO button until the cursor is positioned at the Chapter location. Use the NUMBER or ARROW buttons to enter or select Chapter 7 and press the ENTER
button.
1 / 7 5 / 25 00:22:14 00:40:06
4. Title search. For example, search for Title 6 of the currently playing disc.
Repeatedly press the GOTO button until the cursor is positioned at the Title location. Use the NUMBER or ARROW buttons to enter or select Title 6 and press the ENTER button.
1 / 7 5 / 25 00:22:14 00:40:06
NOTE
Some discs may prohibit the search operation. You will not be able to select a search location, or you may get an “invalid operation” icon after specifying a search location.
Some Blu-ray Discs feature their own search function. Please follow the on-screen instructions to use the search function provided by such discs.

CD and SACD discs

You may specify a point to start playback by entering the disc elapsed time, track elapsed time or track number directly. When playing CD and SACD discs, the on-screen display automatically shows on the TV screen:
1 / 8 00:08:16 00:12:33
The on-screen display has the following components: (from left to right) Playing Status, Track Number, Time Counter, Progress Indicator, and Total Time.
To specify a playback location using one of the following search modes, press the GOTO button. Each press of the GOTO button switches the search mode in the following sequence:
Time Search Track Search
Display
37
ADVANCED OPERATIONS
1. Track time search. For example, search for a specified time within the currently playing track.
Press the GOTO button to place the cursor on the track Time Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes and seconds for your specified search and press the ENTER button.
1 / 8 00:12:3300:08:16
2. Disc time search. For example, search for a specified elapsed time of the entire disc.
While the on-screen display is shown, press the PAGE UP or PAGE DOWN button to switch the Time Counter to disc time mode. Press the GOTO button to place the cursor on the disc Time Counter. Use the NUMBER or ARROW buttons to enter the hours, minutes and seconds for your specified search and press the ENTER button.
5 / 8 01:02:3300:40:46
3. Select a track. For example, search for Track 6 of the currently playing disc.
Repeatedly press the GOTO button until the cursor is placed on the Track Number position. Use the NUMBER or ARROW buttons to enter or select Track 6 and press the ENTER
button.
00:12:3300:08:161 / 8

Memory and Automatic R esume

DVD-A
SACD
1. The player automatically remembers the current position when
POWER
OPEN
playback is interrupted. Operations such as OPEN/EJECT or turning POWER off will cause the player to save the current playing
position.
2. The position is memorized even after turning off the unit or changing the disc.
3. When the next time the disc with a memorized playing position is played back, the player will recognize the saved playing position. Playback will automatically resume from this saved position. However if you wish to cancel the automatic resume and start
playback from the beginning, you may press the STOP button when
prompted.
STOP
PLAY
4. The player can remember playback position for up to 5 discs. When the sixth disc is memorized, the oldest one is replaced.
NOTE
Some Blu-ray Discs do not support resuming and will always play from the beginning.
38
ADVANCED OPERATIONS

Viewing Pictures on DVD-Audio Discs

Some DVD-Audio discs contain static pictures, such as photos of the band or
PAG E UP/DOWN
narration of the album. When a DVD-Audio track is playing, you may use the
PAGE UP button to select the previous picture or the PAGE DOWN button to
select the next picture.
NOTE
Availability of static pictures depends on the DVD-Audio disc.

Pure Audio Mode

You can enjoy higher quality audio by turning off the video processing and output. The Pure Audio mode reduces any potential interference between the video and audio signals.
DVD-A
SACD
DVD-A
PURE AUDIO
1. Press the PURE AUDIO button on the remote control to turn off
video and enter Pure Audio mode. Video output will be turned off. The “PURE” icon will be illuminated on the front panel of the player.
2. Press the PURE AUDIO button again to resume video and cancel
Pure Audio mode.
NOTE
Pure Audio mode is automatically cancelled when the unit is switched off or when playback is stopped.
Since HDMI carries audio together with video, the HDMI video signal cannot be completely turned off. A black screen is transmitted instead to minimize any potential interference.
39

MEDIA FILE PLA YB ACK

In addition to playing standard disc-based formats such as Blu-ray Disc, DVD, CD and SACD, the OPPO BDP-83 Blu-ray Disc Player can play media files. You can enjoy digital music, movies and photos stored on an optical disc (recordable CD or DVD) or a USB drive. Due to the variation of media, encoding software and techniques used, compatibility cannot be guaranteed for all user-created or downloaded contents. Support for such contents is on a best effort basis.

Playback from a USB Drive

The OPPO BDP-83 Blu-ray Disc Player is equipped with two USB ports, one on the front panel and the other on the back. You may use either to plug in a USB drive stored with digital music, movie and photo files.
Device
USB
The USB ports are rated to provide a maximum of 5V, 500mA power to the USB drive. It is sufficient for all USB thumb drives and flash memory card readers, but may not be sufficient for USB hard disks. It is recommended that you use a USB hard disk with an external power supply.
NOTE
This unit supports “USB Mass Storage Class Bulk-Only Transport” devices only. Most USB thumbs drives, portable hard disk drives and card readers conform to this device class. Other USB devices such as MP3 players, digital cameras, and mobile phones may not be compatible.
Supported USB drives must be formatted with the FAT (File Allocation Table) or FAT32 file system. Drives formatted with NTFS file system are not supported.
In some cases, an incompatible USB device may cause the player to stop responding. If this occurs simply turn off the power, remove the USB device, and turn the player back on.
The player accesses the USB drive in read-only mode. In order to minimize the risk of data corruption, it is recommended that you only unplug the USB device when playback is completely stopped.

The Home Menu

When a USB drive or an optical disc stored with media files is inserted, the player presents a “Home Menu” to
assist you in navigating and playing the files. You can also bring up the Home Menu with the HOME button
on the remote control. The Home Menu is the starting point for accessing media files.
HOME
Home Menu
Music
Movie
40
Photo
Setup Menu
MEDIA FILE PLAYBACK
There are four selections in the Home Menu. Depending on what type of media files that you intend to play, you can choose among the “Music,” “Movie” and “Photo” categories. The “Setup Menu” selection will bring
you to the player’s Setup Menu just like pressing the SETUP button on the remote control.

Playing Music Files

To play digital music files stored on an optical disc
Music
1 / 2 items
Data Disc
USB1
or USB drive, select “Music” from the Home Menu. A file browser will appear to assist you in navigating the files and folders.
The first step is to select the “Data Disc” or USB device that contains the music files. The player will take a moment to read the disc and list the folders and music files.
Back
In the music browser, you can perform the
Music
Title: Prelude I C major Artist: Various Album: J.S. Bach Genre: Classical
All Music
Playlist
Browser
Now Playing
0
USB1
01 / 11 items
..
Prelude I C major
Prelude II C minor
C sharp major
C sharp minor
D major
D minor
E flat major
following operations:
Press the UP/DOWN ARROW or PAGE UP/DOWN buttons to move the cursor and
select music files.
When a music file is highlighted by the
cursor, press the ENTER or PLAY button
to start playback.
Press the GREEN color button to add the
currently highlighted music file to the Playlist. A green check mark will appear in
Add to Playlist
Back
front of the file name, and the Playlist count in the lower left corner of the screen will increase by one.
Press the LEFT ARROW button to move the cursor to the Selection Menu in the lower left corner of
the screen. This menu contains the following choices:
o All Music – List all music files in a flat view without any directory structure. o Playlist – List only music files added to the Playlist. o Browser – List folders and music files according to the original directory structure on the
disc or USB drive.
o Now Playing – Show the status of the currently playing music file. o Press the RIGHT ARROW button to move the cursor back to the file listing.
If a music file starts playing and there is no other user operation, the “Now Playing” screen will appear after a few seconds. You can also get to this screen using the “Now Playing” menu. This screen can show the following information:
Playback status: Play, Stop, Pause
Playback mode: Shuffle, Random, Repeat One, Repeat All
Playback progress: track and time
Other embedded information: If the music file contains supported album art image and tags,
those will be displayed.
41
MEDIA FILE PLAYBACK
The following operations are available while the “Now Playing” screen is shown:
Normal playback control: PLAY, STOP, PAUSE, PREV/NEXT, REV, and FWD
Special playback mode: REPEAT and Shuffle/Random (BLUE color button)
Return to the Browser without stopping
Play
1 / 11
Title: Prelude I C major Artist: Various Album: J.S. Bach Genre: Classical
Prelude I C major
02:40 / 05:38
the music: RETURN
Stop playback and return to the
Browser: Press STOP twice.
Shuffle/Random
Back

Playing Movie Files

To play movie files stored on an optical disc or USB drive, select “Movie” from the Home Menu. A file browser will appear to assist you in navigating the files and folders.
The first step is to select the “Data Disc” or USB
Movie
1 / 2 items
Data Disc
USB1
device that contains the movie files. The player will take a moment to read the disc and list the folders and movie files.
Total Time: 3:00:35 Resolution: 640x352 Frame Rate: 24 fps Format: AVI
Movie
USB1
..
CD-R
Classic
Action
New Year Concert
Soccer Match Jul-08
Kingdom
Hitchhiker
Back
04 / 11 items
Back
In the movie browser, you can perform the following operations:
Press the UP/DOWN ARROW or PAGE UP/DOWN buttons to move the cursor and
select movie files.
When a movie file is highlighted by the
cursor, press the ENTER or PLAY button
to start playback.
Once a movie file starts playing, the normal playback control functions are available. To stop the movie and return to the file browser,
press STOP twice. You can also press the HOME button at any time to get back to the
Home Menu.
42
MEDIA FILE PLAYBACK

Viewing Photo Files

To view digital photo files stored on an optical disc or USB drive, select “Photo” from the Home Menu. A file browser will appear to assist you in navigate the files and folders.
The first step is to select the “Data Disc” or USB
Photo
Data Disc
USB1
1 / 2 items
Back
Photo
Format: JPG Size: 0.27M Resolution: 1024x768 Date: 2007-04-17 Model:
USB1
..
Yellow Stone
Yosemite
New Year Parade
Sand Dunes
DSCF1023
DSCF1024
DSCF1025
04 / 11 items
Back
Rotate left (counterclockwise): LEFT ARROW
Rotate right (clockwise): RIGHT ARROW
Repeat: REPEAT
Show photos in “Digest” mode: RED color button. The “Digest” mode shows the 9 photo thumbnails
in a screen to make visual navigation easy.
Show EXIF information: GREEN color button
Play in random sequence: BLUE color button
Change slideshow transition effect: YELLOW color button.

Adding Background Music

device that contains the photo files. The player will take a moment to read the disc and list the folders and photo files.
In the photo browser, you can perform the following operations:
Press the UP/DOWN ARROW or PAGE UP/DOWN buttons to move the cursor and
select photo files.
When a photo file is highlighted by the
cursor, press the ENTER or PLAY button
to start playback in a full screen slideshow fashion.
The following operations are available during the photo slideshow:
Show the help screen: DISPLAY
Normal playback control: PLAY, STOP,
PAUSE, and PREV/NEXT
Adjust slideshow speed: REV and FWD
Zoom: ZOOM. Once in a zoom mode the
ARROW buttons can be used to pan the
photo.
Reflect (flip the photo along its horizontal
axis to make it upside-down): UP ARROW
Mirror (flip the photo along its vertical axis
to make it a mirror image): DOWN
ARROW
You can add background music to the photo slideshow. To do so, you will need to prepare some digital music files. The music files can be stored on the same disk as the photos, or on a different USB drive. Start music
playback first by selecting “Music” from the home menu. Once the music is playing, press the HOME button
to get back to the home menu, and start the photo slideshow by selecting “Photo” in the usual manner.
43

SETUP MENU OPTIONS

The Setup Menu of the OPPO Blu-ray Disc Player presents many setup and configuration options. For most users, the default configuration will be sufficient and will not require any changes to the settings. However if you need to configure the player to perfectly match your home theater settings and viewing preferences, please refer to the following sections for details about each configuration option.

Using the Setup Menu System

In many places of this guide, the player’s Setup Menu needs to be adjusted to match your specific audio/video configuration. When performing menu adjustments, we will use the following terminology to indicate the location of the desired function:
Setup Menu Section > Menu Item > Selection Setup Menu Section is the uppermost Setup Menu level. With the OPPO BDP-83 there are six (6) Setup
Menu sections listed in the left column of the Setup Menu screen. They are: Playback Setup, Video Setup, Audio Format Setup, Audio Processing, Devi ce Setup, and Net work Setup.
Menu Item is the parameter to be adjusted which appears in the center column of the Setup Menu. Once you enter a Setup Menu Section, the list of Menu Items and their current value are displayed in a box.
Selection is the actual numeric or descriptive element that represents the change being made to the selected
parameter. It is the item located to the right of its corresponding Menu Item. A Scroll Icon appears at the top or bottom of the menu when there are more Menu Items or Selections than
what can fit in a screen. You may use the UP and DOWN ARROW buttons to scroll the display in order to
access additional items.
Setup Menu Section
SelectionCurrent ValueMenu Item
Setup Menu
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Language
Parental Control
Angle Mark
PIP Mark
SAP Mark
SACD Priority
DVD-Audio Mode
On
Off
The PIP mark will not appear
Navigation Cue Help Hint Scroll Mark
44
Exit
SETUP MENU OPTIONS
The preceding diagram should give a good description of the various elements and their context. In this
screen we could, for example, instruct you to set the PIP Mark parameter to Off in the Playback Setup section. To indicate where we were, you would see the following: Playback Setup > PIP Mark > Off.
NOTE
It is possible that some setup items are grayed-out and inaccessible. This can be caused by disc still being played back or interlocking with mutually exclusive setup items. Please stop playback or eject the disc before trying to change these setup items. If you still cannot access the setup item, please check for configuration conflicts and consistency. For
example, if “Video Setup > 1080p24 Output” is set to “Off”, the “DVD 24p Conversion” menu item will be grayed-out. Setting “1080p24 Output” to “On” will enable the “DVD 24p Conversion” setting.
To access the player’s Setup Menu simply press the SETUP button on the remote control. Since some Setup
Menu options can become inaccessible when the player is playing a disc, it is recommended that you operate the Setup Menu when playback is fully stopped or when there is no disc in the player.
1. Press the SETUP button on the remote control, and the TV screen displays the following:
2. Press the UP/DOWN ARROW buttons to
Setup Menu
select the section. There are 6 sections:
Playback Setup, Video Setup, Audio
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Language
Parental Control
Angle Mark
PIP Mark
SAP Mark
SACD Priority
DVD-Audio Mode
Off
On
On
Multi-Channel
DVD-Audio
Format Setup, Audio Processing, Device Setup, and Network Setup. Press the ENTER button or the RIGHT ARROW button to enter the selected
section.
3. Press the UP/DOWN ARROW buttons to
select the setup item to be changed, and
press the ENTER or RIGHT ARROW
Configure playback preferences
Exit
button to change the setting. When the scroll icon is shown at the top or bottom of the Setup Menu, it indicates that there are more menu items that can be accessed by
Setup Menu
scrolling with the UP/DOWN ARROW
buttons.
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Language
Parental Control
Angle Mark
PIP Mark
SAP Mark
SACD Priority
DVD-Audio Mode
Off
On
On
Multi-Channel
DVD-Audio
For example, in the Playback Setup section, you may use the UP/DOWN ARROW buttons to select the “PIP Mark” setup item, and press the ENTER button to change the “PIP Mark” setting.
Show/hide the Picture-in-Picture mark
Exit
45
SETUP MENU OPTIONS
4. To select a value from the list of available
Setup Menu
settings, press the UP/DOWN ARROW buttons and then press the ENTER button

Playback Setup

Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Language
Parental Control
Angle Mark
PIP Mark
SAP Mark
SACD Priority
DVD-Audio Mode
On
Off
to confirm.
For example, to select “Off” for “PIP Mark”, use the UP/DOWN ARROW buttons to highlight the “Off” selection and press the ENTER button.
5. To exit the SETUP menu at any time,
press the SETUP button on the remote
The PIP mark will not appear
Exit
control or select Exit from the Setup Menu
sections.
The settings are permanently saved when the player is turned off using either the front panel power button or the remote control. If the AC power is interrupted before the player enters standby status, the settings will not be saved. To ensure proper saving of the SETUP menu settings, please turn off the player and turn it back on after you make major changes to the SETUP menu options.
Playback Setup
The “Playback Setup” section is designed to configure playback preferences for various contents. The setup items in this section are:
Setup Menu
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Language
Parental Control
Angle Mark
PIP Mark
SAP Mark
SACD Priority
DVD-Audio Mode
Configure language preferences
Off
On
On
Multi-Channel
DVD-Audio
Exit
1. Language: To configure language preferences. The menu contains the following sub-items:
Player Language – To choose the display language for the player’s Setup Menu and on-
screen display. At this time only English is available.
Disc Menu Language – To choose the preferred language for displaying DVD and Blu-ray
Disc menus. If a disc menu of the selected language is available, that menu will be shown instead of the default disc menu.
Audio Language – To choose the preferred audio language for DVD and Blu-ray Discs. If
an audio track of the selected language is available on the disc, the audio track will be played back.
Subtitle Language – To choose the preferred subtitle language for DVD. If a subtitle of the
selected language is available, it will be displayed. When “Auto” is selected, the subtitle display is decided by the disc.
46
SETUP MENU OPTIONS
NOTE
If your preferred language is not listed in the Audio, Subtitle or Disc Menu options, select “Other” and enter the Language Code found on page 72 of this manual.
2. Parental Control: To set parental control ratings in order to prevent minors from watching
inappropriate content. This function depends on the disc being properly rated and encoded.
Press the SELECT button to bring up the rating selection menu.
To adjust the parental control settings, you must enter the current parental control
password. If you have not set a parental control password yet, the default password is “0000”.
The parental control menu contains the following sub-items:
BD Ratings - Press the up/down ARROW buttons to select the rating allowed for Blu-
ray Discs. “Off” means no ratings control and all discs are allowed to play. Numbers 1 to 21 corresponds to the age limit. Discs encoded with an age limit that is equal to or below the selected age will be allowed, and any rating above the selected age will be blocked.
DVD Ratings - Press the up/down ARROW buttons to select the rating to allow for
DVD. The available ratings are Kid, G, PG, PG-13, PGR, R, NC17, Adult and Off. The selected rating and below will be allowed, and any rating above will be blocked. If “Off” is selected, all discs are allowed to play.
Area Code – Some Blu-ray Discs may have different parental control ratings for
different geographical areas. At this time the player only supports the parental control ratings used in the United States.
Change Password – To change the parental control password, enter a 4-digit number
as the new password. Enter the new password again to confirm. If the two entries are matching, the new password replaces the old parental control password.
3. Angle Mark (on/off): To turn on/off the display of an angle mark when a DVD or Blu-ray Disc
with multiple available angles is played. Keeping the angle mark off avoids distraction from normal movie watching.
4. PIP Mark (on/off): To turn on/off the display of a Picture-in-Picture mark when a Blu-ray Disc
with secondary video is played. Keeping the PIP mark off avoids distraction from normal movie watching.
5. SAP Mark (on/off): To turn on/off the display of a Secondary Audio Program mark when a Blu-
ray Disc with secondary video and audio is played. Keeping the SAP mark off avoids distraction from normal movie watching.
6. SACD Priority: To select which audio layer to play for SACD (Super Audio CD). The options
are:
Multi-Channel – Play the multi-channel surround audio layer
Stereo – Play the 2-channel stereo audio layer
CD Mode – Play the CD layer of a hybrid SACD disc
7. DVD-Audio Mode: To select which portion of a DVD-Audio disc to play. The options are:
DVD-Audio – Play the DVD-Audio portion of the disc with high-resolution audio
DVD-Video – Play the DVD-Video portion of the disc with Dolby Digital or DTS audio
47
SETUP MENU OPTIONS
8. Auto Play Mode (on/off): To select whether the player shall start playing an audio CD or SACD
automatically. When auto play mode is turn on, these discs will start playing upon insertion into the player. When auto play mode is turned off, the player will wait for the user to start playback
by pressing the PLAY button.
9. PBC – Play Back Control: To enable/disable Play Back Control. Play Back Control is a
primitive form of disc menu. The options are:
On – If the disc contains Play Back Control, show the menu.
Off – Play back the contents by sequence.

Video Setup

The “Video Setup” section of the Setup Menu system allows you to configure video output options. The menu items in this section are:
Setup Menu
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Picture Adjustment
Primary Output
TV Aspect Ratio
TV System
Output Resolution
1080p24 Output
DVD 24p Conversion
Adjust picture control parameters
HDMI
16:9 Wide
NTSC
Auto
Off
Off
Exit
1. Picture Adjustment: To adjust picture control parameters. The OPPO BDP-83 Blu-ray Disc
Player provides a wide array of picture controls. Please refer to the on page
52 of this manual for details of each control.
Picture Adjustment section
2. Primary Output: To select the primary video output port. The options are:
HDMI – Use HDMI as the primary video output port. This setting will ensure that the HDMI
output gets the best possible picture quality. The VRS video processor will be used unless “Source Direct” output resolution is selected, in which case VRS video processing is bypassed. Component and composite video output may not be available or may be limited to a lower resolution based on content source limitations.
Component – Use component video as the primary video output port. This setting will
ensure that the component output will always be available and displays proper video signals. With this configuration, the video decoder in the player performs any necessary format conversion. The VRS video processor is completely bypassed when using the component output.
NOTE
Copyright control mechanisms encoded on the disc may limit the output resolution of the component video output. For DVD, if CSS encryption is in use the output resolution is limited to no more than 480p/576p; for Blu-ray Discs, the output resolution is limited to no more than 1080i, and could be lower if the disc contains the Image Constraint Token.
48
SETUP MENU OPTIONS
3. TV Aspect Ratio: To set the aspect ratio of the player’s output image. The options are :
4:3 Letterbox – Choose this when the display is standard 4:3. A widescreen image is
displayed in “letterbox” format with black borders on top and bottom.
4:3 Pan & Scan – Choose this when the display is standard 4:3. A widescreen image will
be stretched.
16:9 Wide – Choose this when the display is widescreen 16:9. 16:9 materials will be
displayed in its native aspect ratio, and 4:3 materials will be stretched horizontally.
16:9 Wide/Auto – Choose this when the display is widescreen 16:9. 16:9 materials will be
displayed in its native aspect ratio, and 4:3 materials will be displayed with black borders on both sides in order to maintain the original 4:3 aspect ratio.
For a detailed description on how to choose a proper TV Aspect Ratio, please refer to the
Determine the Display Aspect Ratio section on page 21 of this manual.
4. TV System: To choose the output video system or broadcast standard (PAL/NTSC) to match
the type of TV. The options are:
NTSC (default) – When playing NTSC-encoded discs, no system conversion is performed.
PAL-encoded contents are converted to NTSC output. Blu-ray Discs encoded with 24Hz frame rate are converted to 60Hz frame rate if neither 1080p24 Output nor Source Direct output resolution is enabled.
PAL – When playing PAL-encoded discs, no system conversion is performed. NTSC-
encoded contents are converted to PAL output. Blu-ray Discs encoded with 24Hz frame rate are converted to 50Hz frame rate if neither 1080p24 Output nor Source Direct output resolution is enabled.
Multi-system – No system conversion is performed. The output video system is the same
as that encoded on the disc. Blu-ray Discs encoded with 24Hz frame rate are converted to 60Hz frame rate if neither 1080p24 Output nor Source Direct output resolution is enabled. Requires a TV that supports both NTSC and PAL systems.
NOTE
Do not select “Multi-system” if your TV does not support both NTSC and PAL systems. The TV display may become a black screen upon inserting a disc encoded in a different system
than your TV supports. Should this happen, you can press the OPEN button to eject the disc tray, and then use the Setup Menu to correct the “TV System” setting.
5. Output Resolution: To choose the output resolution that best matches your television’s native
resolution. For a detailed description on how to choose a proper output resolution, please refer
Select the Best Output Resolution section on page 20 of this manual.
to the
6. 1080p24 Output: To set 1080p 24Hz output options. This option only applies to the HDMI
output at 1080p resolution. Many Blu-ray Discs that originated from theatrical movies are encoded using 24Hz frame rate, the same number of frames per second as the original theatrical film. If the TV properly supports 1080p 24Hz, smoother motion can be achieved by
enabling 1080p24 Output for such discs. The available options are:
Auto – Video encoded in 24Hz frame rate will be output as 1080p 24Hz if the TV informs
the player that it can support the 1080p24 signal.
On – Video encoded in 24Hz frame rate will be output as 1080p 24Hz without regard to
whether the TV can support the 1080p24 signal or not. This is useful if the TV can actually
49
SETUP MENU OPTIONS
support 1080p24 but does not properly state its capability. Please note that if the TV cannot support 1080p24, selecting this option will result in no video.
Off (default) – Video encoded in 24Hz frame rate will be converted to 60Hz (NTSC) or
50Hz (PAL)
7. DVD 24p Conversion: To set 24Hz frame rate conversion for DVD. This option only applies to
the HDMI output and is available only when 1080p24 Output is enabled (set to Auto or On). Many DVDs that originated from theatrical movies are encoded using a method called “3:2 telecine” to convert the 24 frames per second film to 60Hz video signal. The player can convert the 60Hz video signal back to 24 frames per second and output as 1080p 24Hz. Smoother motion can be achieved by enabling this option, provided that the TV and the disc both meet the conditions for the conversion. The available options are:
On – Convert DVD to 24Hz frame rate when possible.
Off (default) – Do not convert DVD to 24Hz frame rate.
NOTE
The result of DVD 24p Conversion depends heavily on the quality of the content. If the video encoded on the DVD contains incorrect 3:2 cadence, cadence breaks caused by edits, or heavy compression noise that can affect cadence detection, the result may have motion judder or frame tearing. Should this happen, you need to turn off DVD 24p Conversion and watch the DVD in its original frame rate.
8. HDMI Options: To configure video options that are unique to the HDMI output. This item
contains a sub-menu with the following settings:
De-interlacing Mode – To select the type of de-interlacing algorithm that the player should use
to convert interlaced video on a DVD or Blu-ray Disc to progressive output. The OPPO BDP-83 utilizes the Precision De-interlacing™ technology from VRS™ (Video Reference Series) by Anchor Bay for its HDMI output. A proper de-interlacing mode will ensure the output video matches the original contents and is free of de-interlacing artifacts. The available options are:
Auto (default) – Source adaptive de-interlacing is on. This is the recommended setting as it
sets the player to optimally process a variety of signal types.
Film Bias Mode – The Film Bias Mode may improve film mode detection in some cases.
Video Mode – Turn off film mode detection and treat all contents as video origin. De-
interlacing is done by weaving two video fields into a video frame. Use this setting if you are certain the disc is made from footage originally shot with a video camera, and not with a
film camera.
2:2 Even - This mode should be used when you know that the source is high-quality 2:2
pull-down (i.e. film-based content played back in a country with a 50Hz video standard) and want to avoid any loss of cadence lock while watching that source. This mode weaves two adjacent fields together starting with an even field and combining it with the following odd field. This will provide a higher quality overall signal than the ‘Auto’ or ‘Film Bias Mode’ settings, providing that the source really is a 2:2 pull-down and does not have bad edits.
2:2 Odd - This mode is very similar to “2:2 Even” except that this weaves two adjacent
fields together starting with an odd field and combining it with the following even field. Only one of the 2:2 de-interlacing settings is correct for any given source and the correct mode can be chosen by simply trying both of them and selecting the one which does not result in combing artifacts.
50
SETUP MENU OPTIONS
CUE-Correction – To select whether the player should apply chroma filtering to remove
Chroma Up-sampling Errors (CUE) and Interlaced Chroma Problem (ICP). CUE is caused by improper decoding and de-interlacing of MPEG encoded video. The OPPO BDP-83 is free of the CUE problem. ICP is caused by the encoding process for interlaced video, so you may encounter it on some DVD and Blu-ray Discs. The CUE-Correction function can detect and
filter out the errors. The available options are:
Auto (Recommended) – Automatic chroma error detection and correction. Use this setting when you are not sure if the disc has chroma errors.
On – Chroma filtering is always on. Use this setting if the disc is known to have chroma
errors.
Off – No chroma filtering is applied. Use this setting if the disc does not have chroma errors.
Color Space – To select the color space for the HDMI output. The available options are:
Auto (Recommended) – The player checks with the display device to automatically
determine what color space to use. If the display device supports YCbCr 4:4:4, then it will be used to avoid extra color space conversion.
RGB Video Level – The HDMI output uses RGB color space and normal signal range
suitable for video displays.
RGB PC Level – The HDMI output uses RGB color space and expands the signal range.
The expanded signal range is suitable for personal computer (PC) displays. Some TVs are designed to be used as a PC monitor, and expect signal in expanded RGB range when the DVI input is selected. For these displays if the video signal uses the normal RGB range, the black-white contrast will be reduced. You can set the player to use the RGB PC Level output and restore proper contrast.
YCbCr 4:4:4 – The HDMI output uses YCbCr 4:4:4 color space.
YCbCr 4:2:2 – The HDMI output uses YCbCr 4:2:2 color space. Generally this is the color
space that is closest to the color space encoded on the discs. (All discs are encoded in YCbCr 4:2:0 color space, and the video decoder decodes it into YCbCr 4:2:2.)
HDMI Deep Color – Deep Color is an OPTION for some TVs or projectors that feature HDMI
v1.3 inputs. Normally, each pixel of the video image is transmitted using 24-bit data (8-bit per channel for R, G, B or Y, Cb, Cr). If Deep Color is supported, each pixel of the video image can be transmitted using 30-bit (10-bit per channel) or 36-bit (12-bit per channel) data. The increased bit depth should result in smoother color transitions and better gradients. The available options are:
30 Bits – Use the 30-bit per pixel Deep Color mode.
36 Bits –
Use the 36-bit per pixel Deep Color mode.
Off (default) – Do not use Deep Color.
NOTE
Since the Deep Color feature is OPTIONAL and may not be supported by all TVs, enabling Deep Color while connected to a TV without this feature may result in no effect or no video.
At this time, no disc is encoded with Deep Color. Enabling Deep Color will not magically make colors richer, but will help preserve the maximum precision as a result of video processing and picture control adjustment.
51
SETUP MENU OPTIONS
Demo Mode – To enable a special split-screen demonstration mode. This is designed for the
demonstration of VRS™ video processing technology. It can also be used as an aid for setting picture control adjustments for Detail Enhancement, Edge Enhancement and Noise Reduction. It should NOT be used for normal movie watching. The available options are:
On – The video screen will be split in half. The left side demonstrates the result of the
VRS™ video processing, and the right side shows video without the help VRS video processing.
Off (default) – Normal viewing mode.
A/V Sync – To add a delay to the HDMI audio output. If you experience audio/video
synchronization problem, you may use this option to add a slight delay to the audio so it is synchronized to the video.
Use the UP/DOWN ARROW buttons to highlight the A/V Sync menu item. Press the ENTER button.
Press the LEFT/RIGHT ARROW buttons to adjust delay. The audio delay can be adjusted
in 10ms steps.
Press the ENTER button to confirm the new A/V Sync setting and return to the Audio
Processing Setup Menu.
9. Screen Saver: To turn on/off the screen saver function. The screen saver is designed to
minimize burn-in concerns for plasma and CRT display devices. The available options are:
On – After about 3 minutes of inactivity, the player will show an animated OPPO logo
moving on a black background. This allows most areas of the screen to rest and gives all areas an equal opportunity to refresh.
Off – The screen saver will not be activated. Use this option if your TV does not have a
burn-in issue.
Energy Saver – Video output will be turned off after 3 minutes of inactivity. Many
projectors and LCD TVs will go into a standby or sleep mode and turn off their projection lamp or LCD backlight lamp, thus saving energy and prolonging the lamp life. When you press any button on the OPPO remote control or the player’s front panel, the screen saver will be cancelled and video output will be restored. If your TV is already in standby or sleep mode, you may need to wake up the TV by pressing a button on its remote or control panel.

Picture Adjustment

Picture Adjustment is a special section of the Video Setup menu. It allows you to fine tune many picture control parameters in order to achieve the optimal picture quality and visual result. To use Picture Adjustment,
press the SETUP button on the remote control to enter the player’s Setup Menu, and then choose “Video
Setup” – “Picture Adjustment”. The Setup Menu will be replaced by the Picture Adjustment menu:
52
SETUP MENU OPTIONS
-16
-16
-16
-16
-16
-16
-16
Normal
+16
+16
+16
+16
+16
+16
0
0
+8
+16
+16
Picture Mode
Brightness
Contrast
Hue (Analog)
Saturation
Detail Enhancement
Edge Enhancement
Noise Reduction
Y/C Delay
Border Level
0
0
0
0
0
0
0
0
0
Exit
To change a picture adjustment parameter, use the UP/DOWN ARROW buttons to highlight the parameter, and use the LEFT/RIGHT ARROW buttons to change its value.
To aid in the adjustment of picture control parameters, the picture adjustment menu will be reduced to
only show the parameter being adjusted once you press the LEFT/RIGHT ARROW buttons. The
reduced menu will be positioned near the bottom of the screen.
Brightness 0 -16 +16
You can continue adjusting the current parameter by pressing the LEFT/RIGHT ARROW buttons. To select another parameter, press the UP/DOWN ARROW buttons. Press the ENTER button to return to
the large Picture Adjustment menu.
To exit the Picture Adjustment menu and return to the Setup Menu, either select “Exit” or press the RETURN button.
The following picture adjustment controls are available:
1. Brightness: To adjust the brightness (black level) of the video output.
2. Contrast: To adjust the contrast (white level) of the video output.
NOTE
Proper brightness and contrast settings are necessary for a quality video output. If you do not have the correct black and white levels, your images can appear washed out or can lose detail in shadows when watching darker scenes. Televisions have brightness (black level) and contrast (white level) controls; however it may require a combination of tweaking both the player and your television to get the optimal result. We recommend using a calibration disc
such as the Spears & Munsil™ High Definition Benchmark Blu-ray Edition or Digital Video Essentials HD Basics as aids for adjusting. First adjust the television’s picture controls for
the best possible picture. Once that is done, try changing the player’s settings to further refine the picture to the optimal result.
53
SETUP MENU OPTIONS
3. Hue: To adjust the hue (tint) of the video output. This control only applies to analog video
output (component and composite)
4. Saturation: To adjust the saturation (color intensity level) of the video output.
5. Detail Enhancement (Sharpness): To set the sharpness of video output. Detail enhancement
level can be set between -16 and +16. The default is level 0. Level 0 turns off detail enhancement. The negative levels may be used to reduce or eliminate overly sharpened video, however the picture may appear soft. The positive levels increase the enhancement. The higher the level, the sharper the video details are. However too high a sharpness level may cause white line etching around objects. Detail Enhancement can be used together with Edge Enhancement to achieve an optimal result.
6. Edge Enhancement (Edge-Qualified Sharpness): To set the sharpness of object edges in the
video. Edge enhancement level can be set between -16 and +16. The default is level 0. Level 0 turns off edge enhancement. The negative levels reduce the sharpness of object edges. The positive levels sharpen object edges. Edge Enhancement can be used together with Detail Enhancement to achieve an optimal result.
Detail Enhancement and Edge Enhancement produce similar results, but there are subtle differences. Detail Enhancement works best when the source material is “clean” and free from noise. Edge Enhancement works well for less pristine sources. It produces a sharpening effect without making noise more visible.
It is also possible to adjust these two controls in different directions to achieve optimal results from certain “difficult” materials. You may use Detail Enhancement to bring up detail in the entire image, but if you find that object edges are over enhanced you can apply negative Edge Enhancement to reduce the over enhancement of the edges.
Sharpness (Detail/Edge Enhancement) is a video processing function that can produce a sharper looking picture but at the same time may cause unwanted artifacts. The OPPO BDP-83 Blu-ray Disc Player utilizes the fine detail and edge enhancement technology from VRS™ (Video Reference Series) by Anchor Bay for its HDMI output. This technology provides fine control to achieve an optimal balance between enhancing sharpness and minimizing unwanted artifacts. If the source content is properly produced, we generally recommend leaving these controls at level 0.
7. Noise Reduction: To select whether the player shall apply video noise reduction processing.
Noise reduction levels can be set between 0 and 8. The default is level 0, which turns off noise reduction. When set to a smaller positive level, the player adjusts the picture quality by reducing the “mosquito noise” (artifacts around the outlines of objects). When set to a high level between 6 and 8, the player also uses detail and edge enhancement controls to reduce “block noise” (mosaic-like patterns caused by video compression) and “film grain noise” (natural variation of picture intensity caused by film grain). Excessive noise reduction may cause a loss of details. We recommend using the noise reduction function only when you encounter poorly
encoded or compressed video that has apparent noise artifacts.
8. Y/C Delay: To adjust the time difference between the Luminance (Y) and Chrominance (Pb/Pr
or Cb/Cr) channels of the video signal. When there is a significant lag between the channels, the image will look “smeared” because the color component is not lining up properly to the black and white luminance component. Adjust the Y/C delay setting only when the TV or projector has a Y/C delay problem. For a display device that normally does not have Y/C alignment problems, keep the Y/C delay setting at its default level of 0. The Y/C delay setting applies to
the HDMI output only.
54
SETUP MENU OPTIONS
9. Border Level: To set the brightness level of the border area when borders are inserted by the
player to maintain correct aspect ratio. The default level is 0, which corresponds to total black. If you set it to a positive level, the bars gradually become lighter grey instead of black. This setting may be useful for users with Plasma or CRT TVs that are sensitive to “burn-in”. A grey border setting allows the phosphor in the bar area to be moderately used, and can alleviate the burn-in problem. The Border Level setting only applies to the HDMI output, and only affects borders inserted by the player. If the borders are encoded in the original video, the border brightness level will not be affected by this setting.

Audio Format Setup

The “Audio Format Setup” section of the Setup Menu system allows you to configure preferences for audio output formats. The menu items in this section are:
Setup Menu
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Set the secondary audio program mixing option
Secondary Audio
HDMI Audio
SACD Output
Coaxial/Optical Output
LPCM Rate Limit
Off
LPCM
PCM
LPCM
48k
Exit
1. Secondary Audio: To set the Secondary Audio Program mixing option. Some Blu-ray Discs
contain a secondary audio and video program, such as the director’s commentary. Some Blu­ray Discs have a sound effect when you make menu choices. This Setup Menu item allows you to decide whether to mix the Secondary Audio Program and menu clicking sound into the primary audio. The options are:
On – The Secondary Audio Program and menu clicking sound are mixed into the primary
audio. Usually this will cause the primary audio volume to be slightly reduced. High resolution primary audio will be converted to a normal resolution in order to mix with the secondary audio.
Off – The Secondary Audio Program and menu clicking sound are not mixed into the
primary audio and you cannot hear the secondary audio or menu clicking sound. This setting preserves the highest possible audio quality for the primary audio.
2. HDMI Audio: To select digital audio output format from the HDMI port. The options are:
LPCM – Digital audio output via HDMI will be multi-channel Linear PCM format. When this
option is selected, compressed audio bit streams will be decoded by the player. This setting is recommended when connecting the HDMI output directly to a TV or to a receiver without advanced audio decoding capabilities.
Bitstream – Digital audio output via HDMI will be in bitstream format. This option is
recommended when connecting the HDMI output to an A/V receiver or processor that supports advanced audio decoding, such as Dolby TrueHD and DTS-HD Master Audio.
Off – No digital audio output via HDMI.
55
SETUP MENU OPTIONS
NOTE
If you use HDMI to connect audio to an HDMI A/V receiver or audio processor, it is important that you choose 720p or higher HDMI output resolution when playing high resolution audio content (DVD-Audio, SACD, Dolby TrueHD and DTS-HD Master Audio). According to the HDMI specification, the bandwidth available for audio is proportional to the total bandwidth used by video. At 480p/576p resolution, the HDMI specification can only support 2 channels of audio with high sample rate (up to 192kHz), or 8 channels of audio with standard sample rate (up to 48kHz). If you play high resolution audio content at the 480p/576p resolution, you may get reduced audio resolution, incomplete audio channels, or even no audio/video output at all. Choosing a higher output resolution such as 720p or above allows enough bandwidth for all high sample rate audio channels.
3. SACD Output: To select audio output format for SACD. The options are:
PCM – SACD Direct Stream Digital (DSD) data is converted into multi-channel, high-
resolution PCM data. The converted PCM data is then output through HDMI or the internal DAC (Digital to Analog Converter) for the analog audio output ports. If you use a receiver that supports HDMI v1.1 to listen to SACD, please select this option. You may also want to select this option if you prefer the sound quality of the DSD-to-PCM conversion.
DSD – SACD DSD data is output over HDMI without any conversion. For the analog audio
outputs, DSD data is converted into analog signal directly by the internal DAC. If you use a receiver that supports HDMI v1.2a with DSD over HDMI, or you prefer the sound quality of straight DSD to analog, please select this option.
4. Coaxial/Optical Output: To set the output format for the coaxial/optical digital audio output for
use with Dolby Digital and DTS-compatible receivers. The options are:
LPCM – Forces down-mixed 2-channel digital audio output. Choose this setting if your
receiver/amplifier only supports stereo digital (PCM) audio.
Bitstream – Passes audio as compressed bitstream format to the receiver/amplifier.
Choose this setting if your receiver/amplifier is capable of decoding Dolby Digital and/or DTS.
5. LPCM Rate Limit: To set the maximum Linear PCM output frequency for the coaxial/optical
digital output. This menu item is intended to ensure that the audio output is compatible with equipment that cannot support high sample rates. It sets an upper limit to decide whether the player shall down-sample audio. The player does not up-sample audio to higher sample rates. The options are:
48K – Supported by most equipment.
96K – Allows a higher sampling rate and frequency response. It can result in better audio
quality. Ensure that the receiver/amplifier can support it.
192K – Allows the highest sampling rate and frequency response. It can result in the best
audio quality. Ensure that the receiver/amplifier can support it.
56
SETUP MENU OPTIONS

Audio Signal Reference Chart

Blu-ray Discs may contain many types of audio signal formats, some of those are of the high resolution types such as Dolby TrueHD and DTS-HD Master Audio. Blu-ray Discs also have many optional audio components such as the Secondary Audio Program and menu clicking sound. The player’s Audio Format Setup menu allows you to configure the audio output to meet your specific preference. The following chart provides a reference to what type of audio signal can be expected.
When “Secondary Audio” is set to “Off”:
Output Ports HDMI Output Coaxial/Optical Output
Setting
Bitstream LPCM Bitstream LPCM
Source
Analog Multi­Channel
Output Format LPCM 2ch LPCM 5.1ch LPCM 7.1ch Dolby Digital Dolby Digital Plus Dolby TrueHD
DTS DTS-HD High Resolution
LPCM 2ch LPCM 2ch LPCM 2ch LPCM 2ch 2ch LPCM 5.1ch LPCM 5.1ch LPCM 2ch LPCM 2ch 5.1ch LPCM 7.1ch LPCM 7.1ch LPCM 2ch LPCM 2ch 7.1ch Dolby Digital LPCM 5.1ch Dolby Digital LPCM 2ch 5.1ch Dolby Digital
LPCM up to 7.1ch Dolby Digital LPCM 2ch Up to 7.1ch Plus Dolby TrueHD
LPCM up to 192kHz
24-bit 7.1ch
Dolby Digital LPCM 2ch Up to 7.1ch
DTS LPCM up to 7.1ch DTS LPCM 2ch Up to 7.1ch DTS-HD
LPCM up to 7.1ch DTS (core) LPCM 2ch Up to 7.1ch High Resolution
DTS-HD Master Audio
DTS-HD Master Audio
LPCM up to 96kHz
24-bit 7.1ch or
DTS (core) LPCM 2ch Up to 7.1ch
192kHz 24-bit 2ch
When “Secondary Audio” is set to “On” and the player encounters a disc with secondary audio track or menu clicking sound:
Output Ports HDMI Output Coaxial/Optical Output
Setting
Bitstream LPCM Bitstream LPCM
Source
Analog Multi­Channel
Output Format LPCM 2ch LPCM 5.1ch LPCM 7.1ch Dolby Digital Dolby Digital Plus Dolby TrueHD
DTS* 2ch LPCM 2ch DTS* LPCM 2ch 2ch DTS* LPCM 5.1ch DTS* LPCM 2ch 5.1ch DTS* LPCM 7.1ch DTS* LPCM 2ch 7.1ch DTS* LPCM 5.1ch DTS* LPCM 2ch 5.1ch DTS* LPCM up to
DTS* LPCM 2ch Up to 5.1ch
5.1ch
DTS* LPCM up to
DTS* LPCM 2ch Up to 5.1ch
5.1ch
DTS
DTS* LPCM up to
DTS* LPCM 2ch Up to 7.1ch
7.1ch
DTS-HD High Resolution DTS-HD Master Audio
DTS* LPCM up to
7.1ch
DTS* LPCM up to
7.1ch
DTS* LPCM 2ch Up to 7.1ch
DTS* LPCM 2ch Up to 7.1ch
Note: All audio output signals are mixed with primary, second audio and menu clicking sound. DTS* denotes mixed audio re-encoded into DTS bitstream format.
57
SETUP MENU OPTIONS

Recommended Audio Format Options

Depending on your specific audio/video connection method, the audio format options of the OPPO Blu-ray Disc Player may need to be adjusted to match your configuration. Please refer to the video and audio connection methods described previously in this guide and the following audio setup guidelines.
Audio Connection Directly to TV
If the player is connected directly to the TV through HDMI (as described in “Method 1” on page DVI and analog L/R audio cables (as described in “Method 2” on page analog L/R audio cables (as described in “Method 3” on page
12), it is recommended that you use the
11), or through component video and
10), through
following audio format options:
o Secondary Audio: On o HDMI Audio: LPCM o SACD Output: PCM o Coaxial Optical Output: (any – not in use) o LPCM Rate Limit: (any – not in use)
Multi-Channel Digital Audio to Receiver through HDMI
If the player is connected to an A/V receiver or processor with HDMI inputs for high resolution multi-channel digital audio, you are in luck! You are now equipped to send all current audio formats to your receiver in pure digital form. This connection method will typically be as described in “Method 4” on page
13 of this guide.
To get the best possible audio via HDMI, you may need to set the following options on the player’s audio format Setup Menu, depending on the capabilities of your HDMI-capable receiver:
If your receiver supports HDMI v1.3 with decoding capability for high resolution lossless audio formats such as Dolby TrueHD and DTS-HD Master Audio, please set these audio format
options:
o Secondary Audio: Off (or On if you need secondary audio) o HDMI Audio: Bitstream o SACD Output: PCM (or DSD if the receiver supports DSD over HDMI) o Coaxial Optical Output: (any – not in use) o LPCM Rate Limit: (any – not in use)
If your receiver supports HDMI v1.1/1.2 Multi-Channel PCM audio, but not high resolution lossless audio formats such as Dolby TrueHD and DTS-HD Master Audio, please set these
audio format options:
o Secondary Audio: Off (or On if you need secondary audio) o HDMI Audio: LPCM o SACD Output: PCM (or DSD if the receiver supports DSD over HDMI) o Coaxial Optical Output: (any – not in use) o LPCM Rate Limit: (any – not in use)
In this configuration you can enjoy all audio formats using the HDMI connection.
58
SETUP MENU OPTIONS
Multi-Channel Analog Audio to Receiver
If the player is connected to an A/V receiver through the 7.1ch or 5.1ch analog audio jacks using 8 or 6 RCA cables (as described in “Method 5” on page
14), you can play all supported audio formats and listen to them with your A/V receiver and surround sound systems. The following audio format setup options are recommended:
o Secondary Audio: Off (or On if you need secondary audio) o HDMI Audio: Off o SACD Output: PCM or DSD (depending on your listening preference) o Coaxial Optical Output: (any – not in use) o LPCM Rate Limit: (any – not in use)
Also set Speaker Configuration in the “Audio Processing” menu:
Set Down Mix to “7.1Ch” or “5.1Ch”.
Set the speaker size and subwoofer properly according to your actual audio hardware. (see
60)
page
Enable or select the multi-channel analog inputs on your receiver
Coaxial or Optical Digital Audio to Receiver
If your audio connection is as described in “Method 6” on page
15 of this guide, and the A/V receiver supports
Dolby Digital and DTS decoding, the following audio format setup options are recommended:
o Secondary Audio: Off (or On if you need secondary audio) o HDMI Audio: Off o SACD Output: (any – SACD is not available through the
optical/coaxial output)
o Coaxial Optical Output: Bitstream o LPCM Rate Limit: 48k (or higher if supported by the receiver)
Stereo Analog Audio to Receiver
If you primarily listen to stereo contents or your receiver only offers stereo audio connections, please use the
analog RCA-style cables to connect the dedicated Stereo Audio Out of the player to your receiver, as
described in “Method 7” on page
16 of this guide. The following audio format options are recommended:
o Secondary Audio: Off (or On if you need secondary audio) o HDMI Audio: Off o SACD Output: PCM or DSD (depending on your listening preference) o Coaxial Optical Output: (any – not in use) o LPCM Rate Limit: (any – not in use)
59
SETUP MENU OPTIONS

Audio Processing Setup

The “Audio Processing Setup” section of the Setup Menu system allows you to configure how the player will process audio signals before sending them to the output.
Setup Menu
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Configure speaker arrangement for the analog audio output

Speaker Configuration

Dolby Pro Logic II
Dynamic Range Control
Off
Auto
Exit
Speaker Configuration
In the Speaker Configuration menu you can configure speaker settings such as down-mix mode, number of speakers, their distance, size and trim level. The Speaker Configuration menu shows an
illustration of the speaker placements to assist you on properly configuring the speaker parameters.
Upon entering this menu, the cursor is positioned on the front left speaker. You may use the
LEFT/RIGHT ARROW buttons to move the cursor. The RIGHT ARROW button moves the cursor in clockwise sequence, and the LEFT ARROW button moves the cursor in counterclockwise sequence. When the cursor is over the “Down Mix” or “Exit” options, you can also use the UP/DOWN ARROW
button to highlight these options.
Speaker Configuration
SBL
FL
SL
C
SW
Configure the front left speaker
FR
SR
Down Mix Mode: 7.1Ch
NOTE
Speaker Configuration applies to the multi-channel analog audio outputs only. All digital
bitstream and LPCM outputs are unaffected by these settings.
60
SBR
Front Left Speaker
Size: Large
Distance: 12ft
Trim: 0.0dB
Next Speaker
Exit
Exit
SETUP MENU OPTIONS
Down Mix Mode
Down mix is the process of converting multi-channel audio to a lesser number of channels. For example, converting a 5.1ch source to stereo or converting a 7.1ch source to 5.1ch. Down mixing allows the audio output from the player to match the exact number of speakers available in your home theater.
The current down mix mode is displayed in the lower right corner of the speaker placement illustration. To change the audio down mix setting, press the ENTER button while the cursor is over the “Down Mix” option. The following down mix modes are available:
Speaker Configuration
SBL
FL
SL
C
SW
Choose down mix mode
FR
SR
Down Mix Mode: 7.1Ch
SBR
Down Mix
LT/ RT
Stereo
5.1Ch
7.1Ch
Exit
LT/RT – Left Total/Right Total. The center and surround channels are mixed into the two front
channels according to the LT/RT matrix. A Dolby Pro Logic receiver will decode the two­channel audio into surround audio.
Stereo - This mode down-mixes multi-channel audio to 2-channel stereo output. For original
stereo content the output will not change. For original multi-channel content the surround and center channels will be mixed with the left and right front channels. Recommended for use with TV sets or stereo receiver/amplifiers.
5.1Ch – This mode enables 5.1ch decoded audio output. The number of actual output
channels depends on the disc. If the source content has more channels, the surround back channels will be mixed into the surround channels.
7.1Ch – This mode enables 7.1ch decoded audio output. The number of actual output
channels depends on the disc. For 6.1ch contents, the left and right surround back speakers will both output the same surround back audio channel.
Speaker Settings
For each speaker in the home theater system, you can set its size, distance and trim level. To configure a speaker, move the cursor to highlight the speaker and press the ENTER button. The Speaker Settings menu on the right side of the screen will be activated. In the Speaker Settings menu, use the UP/DOWN ARROW buttons to select a parameter, and then press the ENTER button to change it. To exit the Speaker Settings menu and return to the Speaker Configuration illustration, press the LEFT ARROW button or select the “Exit” option. You can also move on to configure the next speaker by selecting the “Next Speaker” option.
61
SETUP MENU OPTIONS
Speaker Configuration
SBL
FL
SL
C
SW
Configure the front left speaker
FR
SR
Down Mix Mode: 7.1Ch
SBR
Front Left Speaker
Size: Large
Distance: 12ft
Trim: 0.0dB
Next Speaker
Exit
Exit
The following speaker parameters can be configured:
1. Size: The speaker size parameter sets bass filtering control for the speakers. The bass crossover
frequency is fixed at 80Hz. The options are:
Large – Bass frequencies are passed to the speakers.
Small – Bass frequencies are not passed to the speakers to reduce possible distortion. If the
subwoofer is available, bass frequencies are redirected to the subwoofer.
On (for subwoofer only) – Specify that a subwoofer is available.
Off – Speaker for the corresponding position does not exist. Audio for the missing speaker is
redirected to other speakers or discarded if redirection is not possible.
NOTE
The front, surround and surround back speakers are configured as pairs. Changes to the size of one speaker will automatically change the other speaker of the pair.
2. Distance: The speaker distance parameters sets delay control for the corresponding audio channel.
The delay is to compensate for the audio propagation time difference caused by the placement of speakers.
Speaker distance compensation is not required if the A/V receiver has the capability to adjust channel delay and compensate for speaker distance differences. However, if your receiver does not have such functions (most receivers do not offer these functions for their multi-channel analog input), you may adjust them through the player. Speaker distance delay is only applied if the player is decoding multi-channel audio. If you use bitstream audio output to your A/V receiver, the bitstream audio is not adjusted for speaker distance delay.
Since the delay is calculated based on the distance difference from each speaker to the listener’s position, it is important to set the distance for the front speakers first and then the other speakers. Anytime you change the distance of the front speakers, the distance of the other speakers will be automatically adjusted to maintain the same distance difference.
62
SETUP MENU OPTIONS
FL
SW
C
FR
Speaker Icons:
FL - Front Left FR - Front Right C - Center SW - Subwoofer SL - Surround Left SR - Surround Right SBL - Surround Back Left SBR - Surround Back Right
SL
3
SBL SBR
2
1
SR
Distances:
1 - Listener to Front 2 - Listener to Center 3 - Listener to Surround Left
For example, in the above diagram, measure the distance (in feet) from the primary listening position to the Front Left or Front Right Speaker. Your Front Right and Left speakers should measure the same distance. If they do not, please adjust them if possible. Enter the distance of the Front Speakers (n in the above picture) into the “Speaker Configuration” menu.
Next, measure the distance (in feet) from center speaker (o) to the listening position. Move the cursor to highlight the Center speaker in the Channel Delay setup page, and enter the distance (as close as possible) in feet. Repeat for each speaker in the system (Center, Surround Left, Surround Right, Surround Back Left, Surround Back Right and Subwoofer) as available. The player will insert appropriate delay to the center, subwoofer and surround channels to make sure sound waves from different speakers arrive at the listener at the same time.
Distance between the surround speakers and the listener must be shorter than or equal to that
between the front speakers and the listener.
In case the channel delay settings cannot match your speaker configuration, please set all distances to the same and use your receiver/amplifier to set the channel delay.
NOTE
The front, surround and surround back speakers are configured as pairs. Changes to the distance of one speaker will automatically change the other speaker of the pair.
63
SETUP MENU OPTIONS
Example Channel Delay Adjustment:
Supported Configuration Unsupported Configuration
14ft
12ft
12ft
10ft 10ft
9ft
12ft
14ft
18ft
16ft
18ft
16ft
12ft
9ft
8ft
8ft
Settings:
Front Speakers – 12ft Center Speaker – 10ft Subwoofer – 10ft Surround Left – 9ft Surround Right – 9ft Surround Back Left – 8ft
Surround Back Right – 8ft
Settings:
Front Speakers – 12ft Center Speaker – 12ft Subwoofer – 12ft Surround Left – 12ft Surround Right – 12ft Surround Back Left – 12ft
Surround Back Right – 12ft
3. Trim Level: The speaker trim level parameters sets the volume of each individual channel.
Channel trim is generally not required since most A/V receivers have the capability to adjust channel trim and compensate for speaker sensitivity differences. However, if your receiver does not have such functions (many receivers do not support channel trim for their multi-channel analog inputs), you may adjust channel trim through the player. For most accurate results, it is
recommended that you use test tones from a calibration disc, such as Digital Video Essentials HD Basics, and a SPL (Sound Pressure Level) meter. The trim level can be set to +/- 10dB in 0.5dB
increments.

Other Audio Processing Settings

In addition to Speaker Configuration, two other audio processing settings are available:
1. Dolby Pro Logic II: Dolby Pro Logic II processing can expand 2-channel source audio into full 5­channel surround sound. Note: Pro Logic II functionality is effective only when Speaker Configuration > Down Mix Mode is set to “5.1Ch” or “7.1Ch”. The available options are:
Music - The surround experience is tailored for multi-channel music playback.
Movie - Emphasis is given to the center channel as two-channel audio is decoded and
played back into your 5.1 system.
Off – No Dolby Pro Logic II processing.
2. Dynamic Range Control: To set the Dynamic Range Compression (DRC). DRC can smooth out
the sonic peaks and valleys common with wide-range digital audio. Enabling DRC may make low
64
SETUP MENU OPTIONS
level audio more audible during low-level listening. Turning off DRC restores the sonic energy present in the original recording. The available options are:
Auto – Play at the dynamic range specified by the disc. This option applies to Blu-ray
Discs only. For other disc types no dynamic range compression is applied.
On – Turn on dynamic range compression.
Off – Turn off dynamic range compression.

Device Setup

The “Device Setup” section of the Setup Menu system allows you to configure additional player options related to the hardware and control functions. The menu items in this section are:
Setup Menu
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Dimmer Control
OSD Mode
Remote Control Code
HDMI CEC
Persistent Storage
Reset Factory Defaults
Firmware Information
Dim front panel display
On
Normal
Code 1
On
Exit
1. Dimmer Control: To control the display intensity of the front panel Vacuum Fluorescent Display
(VFD) information window. In case you feel that the display becomes a distraction to your enjoyment of the video, this option allows you to dim it or turn it off. The available options are:
On - The VFD window is at normal brightness.
Dim - The VFD window is at reduced brightness.
Off – The VFD window is turned off. In this mode the display resumes momentarily when
there is any user operation.
2. OSD Mode: To select how long the on-screen display information, such as elapsed or remaining
time, stays on the TV screen. The available options are:
Normal – On-screen display information stays on the TV screen until the user cancels it.
Silent – On-screen display information shows on the TV screen for a few seconds and then
disappears. The front panel display still maintains the selected display information.
Remaining – On-screen display information stays on the TV screen until the user cancels
it. By default display remaining time instead of elapsed time.
3. Remote Control Code: The OPPO BDP-83 Blu-ray Disc Player can respond to one of 4 sets of
remote control codes. The default is “Code 1”. If you have other OPPO products placed close to the BDP-83, the other products may respond to the BDP-83 remote control. In this case you can select a different remote code to avoid conflicts. The available codes are:
Code 1 – OPPO disc player remote code set 1. This is the default remote code.
Code 2 – OPPO disc player remote code set 2. Use this code if you have other OPPO
products placed close to the BDP-83.
65
SETUP MENU OPTIONS
Code 3 – OPPO disc player remote code set 3. Use this code if you have other OPPO
products placed close to the BDP-83.
Alt. Code – Alternative remote code. The alternative remote control code enables users to
program their universal remote controls that come with TV, projector or A/V receiver to operate the OPPO player. If the universal remote control has a DVD player control function, please program it with the code for TOSHIBA, PHILIPS, MAGNAVOX, MARANTZ or ZENITH DVD players. Since each brand of remote control may have several sets of codes, you may need to try several times using different codes to find a working code.
If you have selected a new remote code, you must set the remote control handset to use the same code. Please refer to the
Setting the Remote Code section on page 9 of this manual for details. If you have
selected “Alt. Code”, the supplied handset will not operate the player, and you must use a universal remote control with the properly configured code set.
4. HDMI CEC: To set HDMI Consumer Electronics Control (CEC) mode. CEC is an optional HDMI
feature that enables convenient remote control and automatic setup of consumer electronics over the HDMI connection. The remote control function allows you to use a single remote handset to operate multiple devices connected via HDMI. For example, you may use the TV remote to control playback of the Blu-ray Disc player. The automatic setup function can automatically turn on the TV and change to the proper input when you start playing a disc in the Blu-ray Disc player. It can also turn off the player automatically when you turn off the TV. The implementation and compatibility of this feature varies by device manufacturer. Each may only implement part of the features or add their own proprietary functions. The manufacturer-specific implementation of the HDMI CEC function is often given a proprietary name of “…Link” or “…Sync”. The OPPO BDP-83 Blu-ray Disc Player provides three modes for the HDMI CEC function:
On – HDMI CEC is enabled. Use this mode if your other devices are compatible with the
player.
Limited – HDMI CEC is enabled but the BDP-83 will only respond to playback control
commands. It will not respond or issue power on/off and input selection commands. Use this mode if you do not want the automatic setup function to turn on/off your devices.
Off – HDMI CEC feature is turned off. The player will not respond to HDMI CEC
commands from other devices, nor will it setup other devices automatically.
5. Persistent Storage: To manage the persistent storage for BD-Video contents. The persistent
storage is a data storage area that holds additional contents for BonusView and BD-Live features. The data will be kept even if you turn off the player. The following persistent storage management options are available:
Storage Device – To select which storage device should be used as the persistent storage.
The OPPO BDP-83 is equipped with 1GB of internal flash memory. There are two USB ports on the player that can accept a USB drive to be used as the persistent storage. The choices are:
Internal Flash – Use the internal flash memory for persistent storage.
USB Drive – Use a USB drive for persistent storage. To meet the specification for BD-Live,
a USB drive of 1GB or larger is required. A USB hard disk is not recommended.
NOTE
The new storage device choice becomes effective only after the player is restarted. Please make sure that you turn off the player and then turn it back on after changing the “Storage Device” option.
66
SETUP MENU OPTIONS
Total Space – To display the total space of the persistent storage.
Available Space – To display the currently available space of the persistent storage. If the
available space becomes too low, some Blu-ray Discs may not play properly.
Erase BD-Video Data – To erase the BD-Video data from the persistent storage.
6. Reset Factory Defaults: To reset all settings to the factory default value. The remote control code,
parental control password and ratings will not be reset. This operation is only available when the playback is completely stopped or when there is no disc loaded.
7. Firmware Information: To display the currently installed firmware version.
8. Firmware Notification: To set whether the player should automatically check if new firmware
versions are available on the Internet server and notify the user about new firmware. The options are:
On – Check for new firmware version automatically and notify the user about new firmware.
Requires working network connection.
Off – Do not check for new firmware version automatically.
9. Firmware Upgrade: To upgrade the player’s firmware. This operation is only available when the
playback is completely stopped or when there is no disc loaded.
The firmware is the system software that controls the features and functions of the player. Since the Blu-ray Disc specifications are new and evolving, it is possible that a Blu-ray disc manufactured after the player was manufactured uses certain new features of the Blu-ray Disc specifications. To ensure the best possible viewing experience, the player may need a firmware update from time to time. Please visit OPPO Digital’s web site
www.oppodigital.com to check for firmware updates and
instructions on installing the updates.
There are three ways to upgrade the player’s firmware. The options are:
Via Disc – You may requests a firmware upgrade disc from OPPO Digital or download a
disc image from OPPO Digital’s web site and burn an upgrade disc. Please follow the instructions that come with the upgrade disc.
Via USB – You may download the firmware files from OPPO Digital’s web site to a USB
drive and then use the USB drive to upgrade the player. Please follow the instructions on the firmware download web page.
Via Network – If the player has a working Internet connection (see page
17 and 68), you may upgrade the player directly over the Internet. Please follow the instructions on your TV screen.
67
SETUP MENU OPTIONS

Network Setup

The “Network Setup” section of the Setup Menu system allows you to configure the parameters for the Internet connection of the player, test the connection and restrict BD-Live access. The menu items in this section are:
Setup Menu
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Choose how the player obtains its IP address
IP Configuration
IP Address
Subnet Mask
Gateway
DNS 1
DNS 2
BD-Live Network Access
Auto (DHCP)
192.168.100.201
255.255.255.0
192.168.100.1
192.168.100.1
192.168.100.1
On
Exit
1. IP Configuration: To determine how the player obtains its IP address. The available options are:
Auto (DHCP) - The player automatically obtains its IP address information using DHCP
(Dynamic Host Configuration Protocol). This is the default setting. In most cases, automatic IP configuration can be used.
Manual – Manually enter the numeric IP address information. Set the IP configuration
manually only when the router has no DHCP server functions or when the router’s DHCP server function is disabled. For more information on how to manually configure the Internet connection and what values to use, please consult your broadband router/modem instruction manuals or call your Internet service provider.
2. IP Address: The Internet Protocol address of the player. When “IP Configuration” is set to “Auto
(DHCP)”, the value displayed here is obtained using DHCP and cannot be changed.
3. Subnet Mask: Each IP address has an associated subnet mask. It is used by the player to decide
whether to route network traffic through the router or directly to another device on the same network. When “IP Configuration” is set to “Auto (DHCP)”, the value displayed here is obtained using DHCP and cannot be changed.
4. Gateway: The IP address of the router. It is also called “default gateway” or “default router”. When
“IP Configuration” is set to “Auto (DHCP)”, the value displayed here is obtained using DHCP and cannot be changed.
5. DNS 1: The IP address of the first (primary) DNS (Domain Name System) server. DNS is the
mechanism to translate human-readable addresses (such as
www.oppodigital.com) to numeric IP
addresses. When “IP Configuration” is set to “Auto (DHCP)”, the value displayed here is obtained using DHCP and cannot be changed.
6. DNS 2: The IP address of the second (secondary) DNS server. When “IP Configuration” is set to
“Auto (DHCP)”, the value displayed here is obtained using DHCP and cannot be changed.
68
SETUP MENU OPTIONS
7. BD-Live Network Access: To restrict BD-Live content access. The available options are:
On – BD-Live access is permitted.
Limited – BD-Live access is permitted only for contents that have a valid content owner
certificate. Internet access is prohibited if the BD-Live contents do not have a certificate. This option ensures that you are accessing only authentic content, although it may block your access to smaller independent content providers.
Off – BD-Live access is prohibited.
8. Connection Test: To test the Internet connection. It is recommended that you test the connection
when you initially connect the player to the Internet, or whenever changes to “IP Configuration” and other network parameters are made.
9. MAC Address: This read-only field displays the MAC (Media Access Control) address of the player.
Each player has a unique MAC address. It is used by networking devices (such as a router or PC) on the same network to provide identification and facilitate communication.
69

REFERENCES

Useful Notes

In order to prolong the service life of your player, it is recommended to wait at least 30 seconds
before you turn it on again after switching it off.
Remove disc and turn power off after operation.
Some functions of the player may not be applicable to certain discs.
Some discs with special features may not be fully supported by the player. This is not a
malfunction of the unit.
In case of player malfunction, please turn it off, wait for 30 seconds and turn it back on. If the
problem still exists, please follow the troubleshooting instructions or contact an OPPO service center.

Troubleshooting

Use this chart to resolve general operational problems. If there are any problems that you cannot resolve, please contact your OPPO service center.
Symptom Possible Cause Solution Reference
No sound
No picture
No color
Picture rolling or split picture
Audio cable is not properly connected Mute is activated Press the MUTE button to cancel the mute. 27 Volume is too low Press the VOL + button to increase the volume to 100. 27 SACD is played and the audio connection is coaxial or optical digital audio
DVD-Audio is played and the audio connection is coaxial or optical digital audio
Video cable is not properly connected TV input is not correctly selected “Pure Audio” mode engaged Check the “PURE” display on the front panel, and
Video output format is not support by the TV Video system is not supported by the TV Video system is not supported by the TV Saturation set too low Check the saturation setting on TV and player. 52 Loose or damaged component video cables
Incorrect video output port If using composite video output, check that the cable is
Incorrect color space setting If using HDMI for video output, check the color space
Incorrect component video cable connection
Video system is not supported by the TV
Check audio cable, and then reconnect if necessary. 10 - 16
This is not supported due to copyright restrictions of SACD. Please use the analog or HDMI audio output. Alternatively, you may set SACD Priority to CD mode and the player will play the CD layer. This is not supported due to copyright restrictions of SACD. Please use the analog or HDMI audio output. Alternatively, you may switch to the DVD-Video playback mode. Check video cable; reconnect if necessary. 10 - 11
Select the input to which the player is connected.
press the PURE button to cancel this mode. Select a proper output resolution that is supported by your TV. When playback is completely stopped, press the P/N button or set the correct TV System in the Setup Menu. When playback is completely stopped, press the P/N button or set the correct TV System in the Setup Menu.
If using component output, check that the three cables are all properly plugged in and not damaged. Make sure the color of the plugs match the jacks on both ends.
not incorrectly plugged into a component video jack.
setting on the TV and player. If using component video output, check the three component video cables to make sure the signals match on both ends When playback is completely stopped, press the P/N button or set the correct TV System in the Setup Menu.
Page
15, 46
15, 46
39
30
30, 49
30, 49
12
10
48 Incorrect color
12
30, 49
70
REFERENCES
“No Disc” or “Unknown Disc” error
Remote control failure
Temporary function failure
Some Setup Menu items are grayed out
No disc or incompatible disc loaded in player Dirty disc recording surface Eject the disc and clean any dirt or fingerprints. 3 Disc not properly loaded Eject disc and make sure the label side is facing up
Condensation on the Laser pick-up head Remote control is out of range Use the remote control within the effective range. 8 Low battery Replace the batteries. 8 Incorrect remote control code Make sure that no disc is playing. Aim the remote at
Scratched or damaged disc is used Some functions are not available during playback Interference from other devices Identify interference by turning off other devices, and
Some setup options cannot be changed while a disc is playing. Some setup options may be mutually exclusive with other setup options.
Eject disc and check. 24
and the record side is facing down. Turn on the player, eject the disc and leave the player on for about an hour.
the player; press and hold the ENTER button on the remote for 5 seconds to set the remote code. Replace the disc. 24
Stop playback completely, then try again. 24
then relocate or replace the offending device Fully stop playback, eject the disc and try the Setup Menu again.
24
2
9
2
19

Specifications

Designs and specifications are subject to change without notice.
Disc Types* BD-Video, DVD-Video, DVD-Audio, AVCHD, SACD, CD, HDCD,
Kodak Picture CD, CD-R/RW, DVD±R/RW, DVD±R DL, BD-R/RE BD Profile BD-ROM Version 2 Profile 2 (also compatible with Profile 1 Version 1.0 and 1.1) Internal Storage 1GB (Actual available storage varies due to system usage) Output Analog Audio: 7.1ch or 5.1ch, stereo
Digital Audio: Coaxial, Optical
HDMI Audio: Stereo, up to 7.1ch high-resolution PCM, up to 5.1ch DSD,
bitstream or LPCM conversion of Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS, DTS-HD High Resolution Audio, and DTS-HD Master Audio.
Analog Video: Composite, Component Video (Y/Pb/Pr, 480i/480p,
720p/1080i available for non-restricted content only)
Digital Video: HDMI with HDCP (NTSC: 480i/480p/720p/1080i/1080p/1080p24,
PAL 576i/576p/720p/1080i/1080p/1080p24) Video Characteristics Audio Characteristics**
General Specification
Operating Temperature Operating Humidity
* Compatibility with user-encoded contents or user-created discs is on a best effort basis with no guarantee due to the variation of media, software and techniques used.
Composite Video Amplitude: 1.0Vp-p (75Ω)
Component Video: Y: 1.0Vp-p (75), Pb/Pr: 0.7Vp-p (75Ω)
Frequency: 20Hz – 20kHz (±0.4dB)
Signal-to-Noise Ratio: >110dB (A-weighted)
THD+N: < 0.002% (1kHz at 0dBFS, 20kHz LPF)
Power Supply: ~ 100V – 240V, 50/60Hz AC
Power Consumption: 35W (0.5W Standby)
Dimensions: 430mm x 336mm x 77mm, 16 x 13¼ x 3 inches
Mass: 5.1kg / 11.2 lbs
5°C - 35°C
41°F - 95°F
15% - 75%
No condensation
**Nominal specification.
71
REFERENCES

Language Code List

Code Language Name
6565 Afar 6566 Abkhazian 6570 Afrikaans 6577 Ameharic 6582 Arabic 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6669 Byelorussian 6671 Bulgarian 6672 Bihari 6678 Bengali, Bangla 6679 Tibetan 6682 Breton 6765 Catalan 6779 Corsican 6783 Czech 6789 Welsh 6865 Danish 6869 German 6890 Bhutani 6976 Greek 6978 English 6979 Esperanto 6983 Spanish 6984 Estonian 6985 Basque 7065 Persian 7073 Finnish 7074 Fiji 7079 Faroese 7082 French 7089 Frisian 7165 Irish 7168 Scots Gaelic 7176 Galician 7178 Guarani 7185 Gujarati 7265 Hausa 7273 Hindi 7282 Croatian
Code Language Name
7285 Hungarian 7289 Armenian 7365 Interlingua 7378 Indonesian 7383 Icelandic 7384 Italian 7387 Hebrew 7465 Japanese 7473 Yiddish 7487 Javanese 7565 Georgian 7575 Kazakh 7576 Greenlandic 7577 Cambodian 7578 Kannada 7579 Korean 7583 Kashmiri 7585 Kurdish 7589 Kirghiz 7665 Latin 7678 Lingala 7679 Laothian 7684 Lithuanian 7686 Latvian,Lettish 7771 Malagasy 7773 Maori 7775 Macedonian 7776 Malayalam 7778 Mongolian 7779 Moldavian 7782 Marathi 7783 Malay 7784 Maltese 7789 Burmese 7865 Nauru 7869 Nepali 7876 Dutch 7879 Norwegian 7982 Oriya 8065 Panjabi 8076 Polish 8083 Pashto, Pushto
Code Language Name
8084 Portuguese 8185 Quechua 8277 Rhaeto-Romance 8279 Romanian 8285 Russian 8365 Sanskrit 8368 Sindhi 8372 Serbo-Croatian 8373 Singhalese 8375 Slovak 8376 Slovenian 8377 Samoan 8378 Shona 8379 Somali 8381 Albanian 8382 Serbian 8385 Sundanese 8386 Swedish 8387 Swahili 8465 Tamil 8469 Telugu 8471 Tajik 8472 Thai 8473 Tigrinya 8475 Turkmen 8476 Tagalog 8479 Tonga 8482 Turkish 8484 Tatar 8487 Twi 8575 Ukrainian 8582 Urdu 8590 Uzbek 8673 Vietnamese 8679 Volapuk 8779 Wolof 8872 Xhosa 8979 Yoruba 9072 Chinese 9085 Zulu
72

LIMITED WARRANTY

OPPO Digital, Inc. Limited One Year W arranty

Your OPPO product has been manufactured to precise standards, and with rigid quality control through every process of manufacturing. It is warranted by OPPO DIGITAL, INC. against defective workmanship or materials for one (1) full year from the original date of purchase. This warranty applies only to OPPO brand products imported or manufactured by OPPO Digital, Inc. and sold to the original consumer purchaser in the U.S.A. or Canada by either OPPO Digital, Inc. or an OPPO authorized reseller. This warranty does not apply to OPPO brand products imported and sold by unauthorized dealers, distributors, or other sellers. This warranty does not apply to products purchased or shipped outside of the U.S.A. and Canada. OPPO Digital, Inc. may at its sole discretion, refuse to honor the warranty of any such unauthorized product that may be presented for service.
Warranty service can only be performed by OPPO Digital, Inc. or an OPPO authorized service center. The original dated bill of sale must be presented upon request as proof of purchase.
OPPO Digital, Inc. will, at its option and at no charge as stipulated herein, repair or replace product which is returned either in person or postpaid and insured to an OPPO service center, with new or reconditioned parts or products. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers noncommercial use of this product, and shall not apply to the following, including, but not limited to: applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; batteries and cable accessories; accidents, abuse, neglect, fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations and surges; failure to follow operating or maintenance instructions. OPPO Digital, Inc. does not warrant uninterrupted or error-free operation of the product. This limited warranty shall not extend to anyone other than the original purchaser of the product. It is nontransferable and states your exclusive remedy.
THE FOREGOING WARRANTY IS THE ONLY WARRANTY WITH RESPECT TO THE PRODUCT AND OPPO DIGITAL, INC. MAKES NO OTHER WARRANTY WHATSOEVER, EXPRESS OR IMPLIED, REGARDING THE PRODUCT INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL OPPO DIGITAL, INC. OR ITS AUTHORIZED RESELLERS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, EVEN IF SUCH DAMAGES RESULT FROM NEGLIGENCE OR OTHER FAULT.
Some states do not allow limitation on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
TO REGISTER YOUR PURCHASE FOR WARRANTY, please visit the following Web site:
http://www.oppodigital.com/registration.asp
TO OBTAIN WARRANTY SERVICE, please follow these instructions:
Contact OPPO customer service via email at service@oppodigital.com or by phone at (650) 961-1118 with details of the defect claimed, product model, serial number, date and place of the original purchase.
73
LIMITED WARRANTY
If it is determined that your product needs service, a Return Merchandise Authorization (RMA) number will be issued to you along with return instructions and address of an OPPO service center.
Pack the product securely, preferably in the original packaging, with your assigned RMA number marked clearly on the outside of the package. Send the package postpaid and insured to the OPPO service center to obtain warranty service.
Thank you for choosing OPPO. Your satisfaction is our highest priority.
OPPO Digital, Inc. 2629 Terminal Blvd, Suite B Mountain View, CA 94043, U.S.A.
www.oppodigital.com service@oppodigital.com (650) 961-1118
5196527 V2.3
74
Loading...