Thank you very much for selecting the
OontZ XL! We hope that you will love it!
The OontZ XL is designed to play your
music wirelessly with high quality, and
be simple and fun to use. This guide was
written to help you get started quickly.
Please take a few minutes to read through
the guide, and try out the features on your
OontZ XL.
Visit our Website:
• To contact our OontZ Support Team
• To view the whole family of OontZ Speakers
• For getting started guides for different types of laptops
TheOontZ.com
Table of Contents
OontZ XL
1) Overview
2) In the Box
3) The Buttons and Connectors
4) Charging the Battery
- Turning the OontZ XL ON/OFF
5) Pairing and Connecting to Your
Bluetooth Device
6) Pairing and Connecting to Your
Bluetooth Laptop
7) Wireless Hands-Free Personal
Speakerphone
8) Connecting to Non-Bluetooth Devices
9) USB Charging Connector
10) Troubleshooting
11) Safety and Precautions
1
1) Overview
OontZ XL
The OontZ XL allows you to listen to music, videos and
games wirelessly from your Bluetooth device. The OontZ
XL works wirelessly with most iPhones
®
iPads
and tablets with Bluetooth*, and the latest laptops
®
, Smartphones,
with Bluetooth. With the built-in microphone you can
use your OontZ XL as a wireless hands-free personal
speakerphone when connected by Bluetooth* to most
®
iPhones
, Smartphones, iPads® and tablets.
You can also listen to non-Bluetooth devices including
PCs and laptops, by simply connecting them to the OontZ
XL via AUX IN with the included 3.5mm audio cable.
The OontZ XL allows you to charge your device from its
5V USB charging connector.
The OontZ XL can support a wireless Bluetooth connection
up to 30 unobstructed feet away from your device.
*Bluetooth Device Support
The OontZ XL is compatible with most Bluetooth
devices which have the following Bluetooth Proles:
iPhone® and iPad® are registered trademarks of Apple Inc.
2
2) In the Box
The following items are included in your
OontZ XL box:
1 – OontZ XL Bluetooth wireless speaker
1 – Dual Voltage Power adapter
1 – 3.5mm audio cable
1 – Guide
3) The Buttons and Connectors
Please open the small rubber input cover at the rear
of the OontZ XL, located at the center near the bottom.
The rst time you open the rubber cover it will be a
little snug, so pull gently to open it. The right side of
the cover detaches and the left side stays connected
to the OontZ XL. You can close the rubber cover when
you are not charging the OontZ XL, or using the USB
charging or AUX-IN.
OontZ XL
3
OontZ XL
Above: (Left gure) The back of the OontZ XL; (Right gure) The top of the OontZ XL
1. DC power socket
To charge the OontZ XL battery, plug the included power
adapter into the wall and then plug the connector into the
DC IN on the rear of the OontZ XL.
2. 5V USB OUT (USB Charging Connector):
Use for charging your iPhone® or Smartphone device, with
your USB charging cable (USB cable is not included).
3. AUX IN
Connect your OontZ XL to your device, laptop or PC that
does not have Bluetooth, with the included Audio 3.5mm
audio cable.
4. Microphone for Hands-Free Speakerphone
5. The Battery Charging Light:
When the OontZ XL is turned on and the power adapter is
connected, the light will be white when charging and turn
red when fully charged.
Note: the OontZ XL will turn off after 15 minutes if no audio is playing
from your device. The indicator light will turn off until the OontZ XL is
turned on again
6. The Bluetooth Indicator light:
Indicates the Bluetooth pairing status.
iPhone® is a registered trademark of Apple Inc.
4
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.