Oontz Budz 2 User Manual

Bluetooth Headphones

Quick Start Guide

Designed and Engineered for

Comfort and High Quality Audio by

TheOontZ.com

Table of Contents Pages

In the Package

Getting to Know Your OontZ BudZ 2

Charging the Battery

Turning On and Off

Pairing & Connecting to Your Mobile Device

Play Controls

To Hear the Best Sound and Best Bass from Your
OontZ BudZ 2 Select the Best Fitting In-Ear BudZ

Comfort Fit with Iso-Fit Cushions
Wearing your OontZ BudZ 2 Under-Ear
Wearing your OontZ BudZ 2 Over-Ear
Using the Cable Length Adjuster
Phone Call Controls
Troubleshooting & Customer Support
Product Safety & Precautions

1

2

3
4

5 - 6

7

8

9
10
11
12
13
14 - 16
16

In the Package

1 - OontZ BudZ 2

Headphones

1 - OontZ BudZ 2

Carry Case

1 - Cable Length Adjuster

6 - pairs In-Ear BudZ

2 - pairs each size

Small | Med | Large

1 - pair

Iso-Fit

Cushions

1 - USB Micro

Charging Cable

Page 1

Getting to know your OontZ BudZ 2

Left BudZ

In-Ear BudZ

Iso-Fit Cushion

Inline Control Buttons

LED Indicator Light

Right BudZ

Backside of

Inline Controls

Mic

Rubber Flap

Covers Micro USB

Charging Port

Page 2

Charging the Battery

Your OontZ BudZ 2 rechargeable
battery will have a partial charge and
be ready to play. For maximum
playtime, fully charge the battery.

Music Play Time

Up to 7 hours on a full charge, with
volume at 60%. Louder volume will
reduce play time.

Automatic Turn Off

The OontZ BudZ 2 will turn off 15

minutes after being disconnected
from your mobile device.

Charge indicator on iPhone

The vertical battery charge level
will appear in the top right
corner of your iPhone screen

Low Charge Remaining Indicator

When the battery charge gets down
to 15% there will be a voice prompt

and the RED LED Light will flash in

rapid succession.

Charging Time

It will take about 2 to 3 hours to fully
charge a low battery

Step 1: Carefully lift the rubber

flap that covers the Micro USB

Charging Port and rotate the

flap to the rear

Step 2: Insert the smaller end of
the Micro USB Cable into the Micro
USB Charging Port as shown.

Step 3: Insert the other end of the
Micro USB cable into either a USB
wall charger for a smartphone or
a USB port on your laptop to
charge the battery.
Indicator Light will come on.

The LED Indicator Light

Slowly flashing Red when charging

Solid Red when fully charged

The LED

Page 3

Turning On and Off

Turn ON

Press and Hold Down button for 2 Seconds
Voice prompt: “Hello”

LED Indicator Light

will turn on

Flashing Blue rapidly
indicates OontZ BudZ 2 is in pairing mode

Flashing Blue 3 times every 5 seconds
indicates OontZ BudZ 2 is connected to a
mobile device and is ready to play

Turn OFF

Press and Hold Down button for 3 Seconds
Voice prompt: “Goodbye”

LED Indicator Light

flashes RED twice and turns off

LED Indicator Light

Page 4