Oontz Angle 3 Raindance User Manual

Quick Start Guide

Portable Bluetooth Speaker

Designed and Engineered By

TheOontZ.com

In the Package

Quick-Start Guide

Micro USB Charging Cable

Lanyard

Note: The cable and lanyard are packed below

the cardboard insert in the box. Slide out the

insert to locate them.

Table of Contents

Buttons, Lights, Connectors and Built-in Mic
Attaching the Lanyard
Battery Features and Charging the Battery

Turning On and Off

Pair & Connect with Your Device

OontZ Wireless Dual Stereo - Connect Two OontZ Angle 3 RainDance Speakers Together
IPX7 Water Resistance
Talk to Siri
Wireless Hands Free Personal Speakerphone
To Play with Non-Bluetooth Devices Use a 3.5mm Stereo Audio Cable
Reset Function
Contacting Customer Support
Safety and Precautions

Pages

1 - 3
4
5 - 7
8
9 - 12
13 - 17
18
19
19
20
21
22
23 - 24

Buttons

Bluetooth (Dual Function)

Track Back

Press and Release to go to
the beginning of the track.

Press and Release twice to
go to previous track

Volume Down

Press to decrease volume

Important - The volume control on your device and the speaker work independently of each other.
To play the speaker at the loudest volume, set the volume on your device to maximum and raise the volume on the speaker to maximum.

Important - Some apps may not support track back, track forward, or play/pause

Power

Play/Pause

Press and Release to Pause/Play

Track Forward

Press and Release to go
to next track

Volume Up

Press to increase volume

Page 1

Lights

Blue Light lit when speaker is on:

- Flashing Blue
speaker is in Bluetooth pairing mode

- Solid Blue

speaker is connected

- Blue Light will turn to Solid Green

when a 3.5mm audio cable is plugged

into the AUX IN Jack

Red Light lit when charging:

- Slowly flashing Red

battery is charging

- Solid Red

battery is fully charged

- Rapidly flashing Red when playing

indicates battery charge is low

White/Orange Light lit
when speaker is in
OontZ Wireless Dual Stereo

- With a second OontZ Angle 3
RainDance speaker (sold separately)
you can wirelessly connect both
speakers together to play with OontZ
Wireless Dual Stereo.

- For OontZ Wireless Dual Stereo
instructions please see page 14.

Page 2

Connectors & Built-in Mic

Rubber Flap

- covers connectors

- pull gently from the top to access

connectors, it is a snug fit as part
of the waterproofing

Built-in Mic for
Speakerphone

AUX IN Jack

Micro USB

Charging Connector

IMPORTANT:

The rubber flap needs to be

closed before the speaker is
exposed to water.
The speaker is not water­resistant or waterproof when

the flap is open.

Page 3

Attaching the Lanyard

- Slide the smaller lanyard
loop through one of the
lanyard attachment holes at
the top of the speaker

- The lanyard is not for use by children under 6 years of age. Small parts can present a choking hazard.

- Slide the larger lanyard loop
through the smaller lanyard loop
that has passed though the other
attachment hole

- Pull the larger lanyard loop
completely through the
smaller lanyard loop to fasten
the lanyard to the speaker

Page 4

Battery Features

- The rechargeable battery comes with a partial
charge and the speaker is ready to play.

- For maximum playtime, fully charge the battery.

- You can play while charging.

Low Charge Remaining

- When the battery charge has less than 15%
remaining the Red Light will begin flashing rapidly.

- The volume will decrease to preserve the
remaining battery charge.

Music Play Time

Up to 12 hours on a full charge, at 2/3 volume.
Louder volumes will reduce the battery play time.

Power Saving Feature

- When playing from battery power the OontZ Angle 3 RainDance will turn

off after 30 minutes of not playing audio to conserve the battery charge. *

- When plugged into a charging source the OontZ Angle 3 RainDance will

remain on until you turn the power off.

- You can continue to keep the speaker plugged into a charging source even
when it is fully charged, keeping the speaker turned on and available

*Exception: when connected to certain devices, including the Amazon

Echo Dot and Amazon Echo, the Power Saving Feature is disabled

and the speaker will remain on until you turn the power off.

Page 5

Charging the Battery

Red Light lit
when charging:

- Slowly flashing Red
battery is charging

- Solid Red
battery is fully charged

- Insert the small end of the Micro
USB Charging Cable into the
Charging Connector as shown.

- Insert the larger end of the Micro
USB Charging cable into a USB wall
charger for a Smartphone or
iPhone, or a USB port on your
laptop/computer to charge the
battery (see illustrations on page 7).

Charging Time:

- Up to 5 hours to fully charge
a low battery.

Page 6