Oontz Angle 3 Plus User Manual

Ultra-Portable Bluetooth Speaker

Quick Start Guide

Designed and Engineered By

TheOontZ.com

Table of Contents

In the Package
Play Controls
LED Lights and Connectors
Charging the Battery

Turning On and Off

Pairing & Connecting
Pairing & Connecting -- From Your Mobile Device
Pairing & Connecting -- From Your Apple Mac or Windows Computer

Playing From Your Chromebook, Laptop, Computer & Non-Bluetooth Devices Using the 3.5mm Audio Cable
IPX5 Water Resistant
Wireless Hands Free Personal Speakerphone
Troubleshooting & Customer Support
Resetting Your OontZ Angle 3 Plus
Safety and Precautions

Pages

1
2
3
4 - 5
6
7
8
8
9
10
11
12 - 14
15
16

In the Package

Micro USB Charging Cable

3.5mm Audio Cable

The

Quick Start Guide

Page 1

Play Controls

Bluetooth Button (Dual Function)

Button (Dual Function) Button (Dual Function)

Volume Down

Press and Release to decrease volume
one level; continue to press and release
until volume lowers to desired level

Note: Holding the button down will result in track back

Track Back

Press and Hold Down for 2 Seconds

Note: The volume on the OontZ Angle 3 Plus and your source device both need to be set to the highest level for the loudest volume.
The volume controls on your source device and speaker work independently of each other.

Button

Press and Release to Pause/Play

Volume Up

Press and Release to increase volume one
level; continue to press and release until
volume raises to desired level

Note: Holding the button down will result in track advance

Track Advance

Press and Hold Down for 2 Seconds

Power Button

Page 2

LED Lights and Connectors

Built-in Mic for Speakerphone

Bluetooth LED Light (Blue)

(LED is only visible when

speaker is turned on)

Charging LED Light (Red)

(LED visible when connected to a
charging source and when

battery charge is low)

Rubber Flap

(lifts up from top)

AUX IN Jack

(located under rubber flap)

Micro USB Charging Connector

(located under rubber flap)

You can use the small end of the micro USB
Charging Cable to make it easier for you to

open the rubber flap from the top. It is a
tight fit to keep the speaker water resistant.

Note: The rubber flap needs to be closed to

keep the speaker water resistant.

Page 3

Charging the Battery

The lithium ion rechargeable battery
comes with a partial charge and is
ready to play. For maximum
playtime, fully charge the
battery. You can play
while charging.

Charging LED Light (Red)

To charge the battery:

Step 1: Pull down the rubber flap from the top

to access the Micro USB Charging Connector.

Step 2: Insert the smaller end of the Micro
USB Charging Cable into the Micro USB
Charging Connector as shown.

Step 3: Insert the larger end of the Micro USB
Charging Cable into either a USB wall charger
(5V/1.0A up to max 5V/2.0A) for a Smartphone or
iPhone, or a USB port on your laptop to charge
the battery. We recommend using a UL approved
USB Wall adapter, and no adapter should ever be
used that has been damaged or is defective.

Slowly flashing Red when charging

Solid Red when fully charged

Note: Close the rubber flap when not charging. The rubber
flap needs to be closed to keep the speaker water resistant.

Page 4