Oontz Angle 3 User Manual

Quick Start Guide

Ultra-Portable Bluetooth Speaker

Designed and Engineered By

Please visit TheOontZ.com

Table of Contents

In the Package
Buttons and Connectors
Charging the Battery

Turning On and Off

Pair & Connect - Step 1
Pair & Connect - Step 2 --

-- From Your From Your iPhone, iPad, Smartphone, Tablet and Mobile Devices

-- From Your Apple Mac or Windows 10 Laptop/Computer

-- From Your Amazon Echo Dot

Playing From Your Windows 7 or 8 Laptop/Computer and Non-Bluetooth Audio Devices Using the 3.5mm Audio Cable
IPX5 Water Resistance
Wireless Hands Free Personal Speakerphone
Troubleshooting
Resetting Your OontZ Angle 3
Customer Support
Safety and Precautions

Pages

1
2
3 - 5
6
7

8
8
9 -10
11
12
13
14 - 18
19
20
20 - 21

In the Package

Quick-Start Guide

Micro USB Charging Cable

OontZ Angle 3

Speaker

3.5mm Audio Cable

Note: The Micro USB Charging Cable and the 3.5mm
Audio Cable are packed below the cardboard insert in

the box. Slide out the insert to locate the cables.

Page 1

Buttons and Connectors

Built-in Mic for Speakerphone

Charging LED Light (Red)

(LED visible when connected to a

charging source)

Bluetooth LED Light (Blue)

(LED is only visible when

speaker is turned on)

Bluetooth Button

(Dual-Function)

Volume Down Button

Play/Pause Button Volume Up Button

Power Button

Rubber Flap

(lifts up from bottom)

AUX IN Jack

(located under rubber flap)

Micro USB Charging Port

(located under rubber flap)

Page 2

Charging the Battery

Charging LED
Light (Red)

The lithium ion rechargeable battery will have a partial
charge and be ready to play. For maximum playtime,
fully charge the battery. You can play while charging.

To charge the battery:
Step 1: Lift up the rubber flap from the bottom to

access the Micro USB Charging Port.

Step 2: Insert the smaller end of the Micro USB Charging
Cable into the Micro USB Charging Port as shown.

Step 3: Insert the other end of the Micro USB Charging
cable into either a USB wall charger for a Smartphone
or iPhone, or a USB port on your laptop/computer to

charge the battery (see illustrations on page 4).

Charging LED Light (Red)

(LED visible when connected to a charging source)

Slowly flashing Red when charging

Solid Red when fully charged

Note: Close the rubber flap when not charging. The rubber
flap needs to be closed to keep the speaker water resistant

Page 3

Charging the Battery (continued)

Insert the larger end of the Micro USB charging cable into either a USB wall charger (5V 1.0A up to 5V 2.4A maximum)

for a Smartphone or iPhone, or a USB port on your laptop/computer to charge the OontZ Angle 3 battery.

Page 4

Charging the Battery (continued)

Music Play Time

Up to 12 hours on a full charge, at 2/3 volume.
Louder volumes will reduce the battery play time.

Play while charging

You can play the OontZ Angle 3 while it is charging.

Power Saving Feature

- When playing from battery power the OontZ Angle 3

will turn off after 15 minutes of not playing audio to

conserve the battery charge. Exception: when
playing audio from an Amazon Echo Dot, the
power saving feature on the speaker is disabled by
the Amazon Echo Dot and the OontZ Angle 3 will

not automatically turn off after 15 minutes.

- When plugged in to a USB wall charger or USB port on a

laptop/computer (not in sleep mode) the OontZ Angle 3 will
remain on until you turn the power off. You can continue to keep the

speaker plugged in to a charging source even when it is fully charged.

Charging LED Light (Red)

When the battery charge
is down to about 15% the

Charging LED Light (Red)
will begin flashing Red
and will remain flashing

until the speaker is turned

off. The volume will

decrease to preserve the
remaining battery charge.

Charging Time

It will take about 5 to 6
hours to fully charge a
low battery.

Page 5

Turning On and Off

Charging LED
Light (Red)

Power Button

Bluetooth LED
Light (Blue)

Turn ON

Press and Release the Power Button

Charging LED Light (Red)

T

urns on for one to two seconds, then turns

off when playing from battery power

Bluetooth LED Light (Blue)

Blue light will turn on

Flashing Blue indicates speaker is on and
in pairing mode

Solid Blue indicates speaker is on and connected
to a source device and ready to play

Turn OFF

Press and Hold Down the Power Button
for 3 Seconds

Bluetooth LED Light

Blue light will turn off

Page 6