Onkyo TX NR906, TX SR876 User Manual

Speaker Hookup

QUICK SETUP

Model : TX-SR876/TX-NR906

Thank you for purchasing this product. This quick setup sheet shows the typical hookup method for connecting speakers and AV components (DVD player, TV, cable/satellite receiver). For more detailed hookup information and operating instructions, please see the Instruction Manual.

Speaker Layout (Main Room)

Front right

speaker

Center

speaker

Front left

speaker

Powered

subwoofer

Sub

woofer

Sub

woofer

Surround

Surround Left

Left

Front

Front Left

Left

Surround

Surround Back

Back Left

Left

Listener

Center

Front

Front Right

Right

Surround

Surround Right

Right

Surround

Surround Back

Back Right

Right

5/8''

(15mm)

Surround back

right speaker

Surround right

speaker

See the other side of this sheet for the AV component hookup.

Surround

left speaker

Surround back

left speaker

* 2 9 3 4 4 7 6 0 *

AV Component Hookup

With an HDMI cable you can send both audio and video with a single cable, making connecting simple and keeping wires neat. If you have an HDMI-compatible TV and players, you can connect them to the AV receiver with HDMI cables. Digital audio signals received at HDMI IN input are output by the speakers and headphones connected to the AV receiver.

See the other side of this sheet for the Speaker hookup.

If your TV or player doesn’t support HDMI, use the analog or digital connections shown below.

IF NO HDMI

HDMI

OUT

HDMI

DVD player

DIGITAL

OUT

COAXIAL

AUDIO

OUT

VIDEO

OUT

DVD player

VIDEO 1

Please ensure the monitor input (VIDEO 1, VIDEO 2, VIDEO 3, etc.) selected corresponds to actual connection used.

HDMI

OUT

Cable/satellite

Using the HDMI Inputs

If there’s no picture on your TV, you’ll need to assign the HDMI inputs as necessary using the onscreen setup menus. If you connect your DVD player to the AV receiver’s HDMI IN 1, and connect your cable or satellite receiver to HDMI IN 3, as shown above, it’s not necessary to change the default assignments.

In addition, you must set the “Monitor Out” setting to “HDMI Main” by pressing the [HDMI OUT] button. (If your TV is not connected to the HDMI OUT, set the “Monitor Out” setting to “Analog”.)

Coaxial feed from TV antenna

If you are not using

Antenna input

(e.g., RF IN)

Cable/satellite box, please refer to the instruction manual.

On the front panel On the front panel

1. Input/Output Assign

2. Speaker Setup

3. Audio Adjust

4. Source Setup

5. Listening Mode Preset

6. Miscellaneous

7. Hardware Setup

8. Lock Setup

Using the Digital Inputs

If there’s no sound, you’ll need to assign the digital inputs as necessary using the onscreen setup menus. If you connect your DVD player to the AV

1. Input/Output Assign

1. Monitor Out

2. HDMI Input

3. Component Video Input

4. Digital Audio Input

5. Analog Audio Input

receiver’s DIGITAL COAXIAL IN 1, and your cable/satellite receiver to the DIGITAL COAXIAL IN 3, as shown, it’s not necessary to assign the digital input.

In addition, you must set the “Monitor

1–2. HDMI Input

DVD

VCR/DVR CBL/SAT GAME/TV

AUX1 AUX2

HDMI1

HDMI2 HDMI3 HDMI4

- - - - -

Out” setting to “Analog” by pressing the [HDMI OUT] button first.

COAXIAL

DIGITAL

OUT

VIDEO

OUT

AUDI O

OUT

Cable/ satellite

Antenna input

(e.g..RF IN)

Coaxial feed from TV antenna

If you are not using Cable/satellite box, please refer to the instruction manual.

1. Input/Output Assign

2. Speaker Setup

3. Audio Adjust

4. Source Setup

5. Listening Mode Preset

6. Miscellaneous

7. Hardware Setup

8. Lock Setup

1. Input/Output Assign

1. Monitor Out

2. HDMI Input

3. Component Video Input

4. Digital Audio Input

5. Analog Audio Input

1–4. Digital Audio Input

DVD

VCR/DVR CBL/SAT GAME/TV AUX1

AUX2

COAX1

COAX2 COAX3

FRONT

OPT1

- - - - -