TA-RW255
DOUBLE CASSETTE DECK
SPECIFICATIONS
NPR No. 05N49 10/05 Printed in Japan
Due to a policy of continuous product improvement, Onkyo reserves the right to change specifications and appearance without notice. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Features
• Double deck for tape dubbing
• Deck A for playback Deck B for recording and playback
• NORMAL and HIGH speed dubbing capability
• Auto-reverse on both decks: Auto-reverse record on Deck B
• CD player-to-deck synchronous recording
• Dolby®B and C noise reduction
• 8-segment FL peak level indicators (with peak hold
)
• Automatic tape selector
• Auto-space rec mute
• 4-digit electronic tape counter
• Vibration-proof chassis
• Aluminum front panel
• RI (Remote Interactive)system compatible
Format
.........................................................................
Auto reverse/Double deck
Track Format
..............................................................
4 tracks/2 channels
Record System
..........................................................
AC Bias
Erase System
.............................................................
AC Erase
Tape Speed
.................................................................
4.76 cm/sec
Wow and Flutter
........................................................
0.13 % (WRMS
)
Frequency Response
Metal Position Tape
.................................................
30 Hz-15 kHz/±3 dB
High Position Tape
...................................................
30 Hz-14 kHz/±3 dB
Normal Position Tape
..............................................
30 Hz-13 kHz/±3 dB
Signal-to-Noise Ratio
Metal Position/Type IV. Dolby NR OFF
....................
56 dB
High Position/Type II. Dolby NR OFF
......................
55 dB
Normal Position/Type I. Dolby NR OFF
...................
50 dB
A noise reduction of 10 dB abve 5 kHz and 5 dB at 1 kHz is possible with the Dolby B NR.
A noise reduction of 20 dB at 5 kHz is possible with the Dolby C NR.
Input Terminals
Input Sensitivity
.......................................................
80 mV
Input Impedance
......................................................
50 kΩ
Output Terminals
Standard Output Level
.............................................
500 mV
Output Load Impedance
..........................................
More than 50 kΩ
Motors
..........................................................................
DC Servo Motor 1 + 1
Heads
PB Head
...................................................................
Special Hard Permalloy x 1
Rec/PB Head
............................................................
Special Hard Permalloy x 1
Erase Head
...............................................................
Ferrite x 1
Controls
.......................................................................
Dolby NR, Reverse Mode, Rec Level, Eject, Tape Counter Deck—A/B Select,
Counter Reset, Tape Operation, NORM and HIGH Speed Dubbing, Standby,
Auto-Space, Main Power
GENERAL
Power Supply
.............................................................
AC 230-240 V, 50 Hz
Power Consumption
................................................
17 W
Standby Power Consumption
................................
0.6 W
Dimensions (W x H x D
)
..........................................
435 x 121 x 303 mm
Weight
.........................................................................
4.9 kg
Onkyo Corporation
2-1 Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: +81-72-831-8136 Fax: +81-72-833-5222 http://www.onkyo.com/
Onkyo China Limited
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung, N. T., HONG KONG, SAR of China Tel: +852-2429-3118 Fax: +852-2428-9039 http://www.ch.onkyo.com/
Onkyo U.S.A. Corporation
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: +1-201-785-2600 Fax: +1-201-785-2650 http://www.onkyousa.com/
Onkyo Europe Electronics GmbH
Liegnitzerstrasse 6, 82194 Grobenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
CAPTURING THE DETAIL AND CLARITY OF ALL YOUR
TAPE RECORDINGS WITHOUT
A HINT OF TAPE HISS