Onkyo TA-RW244-144 User Manual

TA-RW244/144

,

Stereo Cassette Tape Deck

Instruction Manual

STEREO CASSETTE TAPE DECK RI

PLAYBACK DECK-A

EJECT

DOLBY NR

REVERCE MODE

POWER

STAND-BY

Features................................................ 2

Important safeguards ........................... 3

Precautions .......................................... 3

Control positions and names ............... 4

Setting the voltage selector.................. 4

System connections ............................. 5

Power connections............................... 5

To play a tape ...................................... 6

Reverse mode function ........................ 7

Recording ............................................ 8

DUBBING COUNTER

AUTO SPACE

HIGHNORMAL A/B RESET

DUBB.STOP

Making good sound recordings ........... 9

Tape dubbing ..................................... 10

Useful recording functions ................ 11

Connecting ONKYO components

for z operation ................................ 12

Handling cassette tapes...................... 13

Cassette deck maintenance ................ 14

Specifications .................................... 14

Troubleshooting guide....................... 15

REC LEVEL

MIN MAX

EJECT

PLAYBACK/RECORDING DECK-B

AUTO REVERSE/COMPUTER CONTROLAUTO REVERSE/COMPUTER CONTROL

Thank you for your purchase of the ONKYO

TA-RW244/144 Cassette Tape Deck. Please read this manual thoroughly before making connections and plugging in the AC power cord. Following the instructions in this manual will enable you to obtain optimum performance and maximum listening enjoyment from your new TA-RW244/144. Please retain this manual for future reference.

Features

FOR CANADIAN MODEL: (POUR LE MODELE CANADIEN)

• For models having a power cord with a polarized plug

CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• Sur les modèles dont la fiche est polarisée.

ATTENTION:POUR ÉVITER LES CHOCS

ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQ’AU FOND.

Full-logic record/play transports with auto reverse and continuous play

Full-logic controls provide smooth, trouble-free electronic switching, and keep you from having to press the stop button when switching between functions. And auto-reverse/continuous play lets you play both sides of both cassettes in sequence, without having to take out the tapes and flip them over.

Two eight-segment peak-holding fluorescent meters

The easy-to-read FL meters have peak-holding functions, which are indispensable when setting the best record/playback levels.

Four-digit electronic tape counter

The large, clear electronic tape counter shows the current tape position, so you can easily edit and locate specific sections.

CD synchro recording

This feature lets you easily make accurate recordings from a compact disc at a touch of a button, when your tape deck is connected to certain z (remote interactive) compatible ONKYO CD players.

z (Remote Interactive) compatible

If you’re one of the fortunate ones who own other ONKYO components that bear the z mark, simple single-cable connection lets you operate all of the major functions of both transports of your TA-RW244/144 with the other component’s remote. (The remote control supplied with ONKYO z CD players covers Deck-B functions only.)

Other features

• Auto tape selector: Automatically sets the optimum bias and

equalization levels for the type of tape you insert.

• Dolby B and C Noise Reduction: Reduces the audibility of

undesirable tape hiss while retaining music nuances.

• Auto space rec mute: Inserts precise five-second breaks between

songs to give your tapes a more professional touch and to make music search easier.

Supplied accessory

Audio connection cable(2)

z cable(1)

ATTENTION FOR BRITISH MODEL

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

IMPORTANT

A 5 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME, THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET. If in any doubt, please consult a qualified electrician.

Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

WARNING

“TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.”

FOR EUROPEAN MODEL:

Declaration of Conformity

We,

ONKYO EUROPE ELECTRONICS GMBH INDUSTRIESTRASSE 18/20 82110 GERMERING, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN55013, EN55020, EN60555-2, -3 and EN60065

GERMERING,GERMANY

H. YAMAZOE

ONKYO EUROPE ELECTRONICS GMBH

CAUTION

“TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.”

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

• The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Important safeguards

Precautions

1. Read Instructions — All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions — The safety and operating instructions should

be retained for future reference.

3. Heed Warnings — All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions — All operating and use instructions should be

followed.

5. Water and Moisture — The appliance should not be used near

water — for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.

6. Carts and Stands — The appliance should be used only with a cart

or stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved with care. Quick

stops, excessive force, and uneven surface may cause the appliance and cart combination to overturn.

PORTABLE CART WARNING

S3125A

7. Wall or Ceiling Mounting — The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

8. Ventilation – The appliance should be situated so that its location or

position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or if placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings, there should be free space of at least 20 cm (8 in.) and open up behind the appliance.

9. Heat — The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10. Power Sources — The appliance should be connected to a power

supply only of the type described in the operating instructions or as marked on the appliance.

11. Polarization — If the appliance is provided with a polarized plug

having one blade wider than the other, please read the following information: The polarization of the plug is a safety feature. The polarized plug will only fit the outlet one way. If the plug does not fit fully into the outlet, try reversing it. If there is still trouble, the user should seek the services of a qualified electrician. Under no circumstances should the user attempt to defeat the polarization of the plug.

12. Power-Cord Protection — Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13. Cleaning — The appliance should be cleaned only as recommended

by the manufacturer.

14. Nonuse Periods — The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of time.

15. Object and Liquid Entry — Care should be taken so that objects do

not fall and liquids are not spilled into the enclosure through openings.

16. Damage Requiring Service — The appliance should be serviced by

qualified service personnel when: A. The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance;

or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or E. The appliance has been dropped, or the enclosure damaged.

17. Servicing — The user should not attempt to service the appliance

beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

1. Warranty Claim

You can find the serial number on the rear panel of the unit. In case of warranty claim, please report this number.

2. Recording Copyright

Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

3. Deck Location

• Do not use or leave in direct sunlight or in other places subject to high temperature and humidity. The unit should also not be left in potentially hot places such as near heating appliances. Excessive heat and moisture can lead to internal damage and serious malfunctions (this also applies to cassette tapes). The recommended ambient temperature range is 5˚C to 35˚C.

• Avoid damp and dusty places and locations prone to vibrations.

• Be extremely careful with the recording/playback heads. Clean and demagnetize them regularly, but under no circumstances should magnets or other metals be used anywhere near the heads.

• This unit is extremely sensitive to magnetic fields, so do not use near large speakers or other devices which generate magnetic fields.

• Hum may even be induced by magnetic flux leakage from the power transformer in certain amplifiers. Therefore, this unit should also be kept clear of the amplifier.

• Do not remove the cabinet case. If any of the internal parts are handled, there is a considerable danger of electric shock.

4. Cassettes to Avoid:

• Cassettes with poorly formed cases that rattle during rewind and fast forward.

• Low cost cassettes with no guide roller or pressure pad spring should never be used for stereo.

• C-120 cassettes — because the tape and the coating are extremely thin, distortion levels are high. Also, even a slight stretching of the tape will make it susceptible to being caught up in the pinch roller and capstan.

• Endless tapes, if used for a long period of time, can overheat.

5. Power WARNING BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.

• The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e.g., AC230V 50Hz or AC120V 60Hz) written on the rear panel.

• Voltage Selector (Rear Panel) Worldwide models are equipped with a voltage selector to conform with local power supplies. Be sure to set this switch to match the power supply in your area before plugging in the unit. Models without a voltage selector can only be used in areas where the power supply voltage is the same as that of the unit. (See page 4)

Control positions and names

For more information about a button or control, turn to the page number listed in square brackets([ ]).

12345

ONKYO

STEREO CASSETTE TAPE DECK RI

POWER

EJECT

DOLBY NR

REVERCE MODE

PLAYBACK DECK-A PLAYBACK/RECORDING DECK-B

POWER

STAND-BY

131412 11 10

TA-RW144

STAND-BY

STAND-BY/ON

MAIN POWER

TA-RW244

STAND-BY

OFF

Front panel

1. Deck A cassette holder [6]

2. DOLBY NR button [6, 8, 9]

3. Deck A r EJECT button [6]

4. REVERSE MODE button [6, 7, 8, 10]

5. DUBBING button (NORMAL/HIGH) [10]

6. COUNTER A/B button [8]

7. Deck B r EJECT button [8]

8. COUNTER RESET button [8]

9. Deck B cassette holder [8]

10. REC LEVEL control knob [8]

11. Deck B operation buttons t : Rec/pause button [8] AUTO SPACE

: Auto space button [11]

d : Rewind button [7] f : Fast forward button [7] a : Reverse play button [6, 9] e : Stop button (DUBB.STOP) [6, 9, 10] s : Forward play button [6, 9]

67 8 9

EJECT

DUBBING COUNTER

AUTO SPACE

HIGHNORMAL A/B RESET

DUBB.STOP

REC LEVEL

MIN MAX

AUTO REVERCEAUTO REVERCE

ab c d

DECK-A

PLAY

dB -20- -10 -6 -3 +30+6

HI-SPEED DUBBING

12. Deck A operation buttons

d : Rewind button [7] f : Fast forward button [7] a : Reverse play button [6] e : Stop button [6] s : Forward play button [6]

13. STAND-BY indicator [5]

14. POWER button [5] (TA-RW144) STAND-BY/ON button [5] (TA-RW244) MAIN POWER button [5] (TA-RW244)

DOLBY NR

OFF B C

Display

a Deck A direction indicator b Reverse mode indicator c Dubbing indicators d Dolby NR indicators e o REC indicator f g PAUSE indicator g Deck B direction indicator h Counter i Deck A/B indicator j Peak level indicator

e f

REC

A B

PAUSE

DECK-B

PLAY

Setting the voltage selector (Worldwide model only)

Models without a voltage selector can only be used in areas where the power supply is the same as that of the cassette deck.

27122309Y

MWT

C A U T I O N

AVIS

RISK OF ELECTRIC SHOCK

RISQUE DE CHOC ELECTRIQUE

DO NOT OPEN

LINE IN LINE OUT

(REC) (PLAY)

REMOTE CONTROL

STEREO CASSETTE TAPE DECK

MODEL NO. TA-RW244

RATING: AC120/220-230V 50/60Hz 17W

2-1, NISSHIN-CHO, NEYAGAWA-SHI,OSAKA,

JAPAN

NE PAS OUVRIR

DOLBY NOISE REDUCTION MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES LICENSING CORPORATION. ‘DOLBY’ AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES LICENSING CORPORATION.

VOLTAGE SELECTOR

220-230V 120V

VOLTAGE SELECTOR

220-230V 120V

1. Determine the proper voltage for your area: 220-230 V or 120 V.

2. If the preset voltage does not conform to your area, insert a screwdriver into the groove in the switch. Slide the switch all the way to the right (120 V) or to the left (220-230 V), whichever is appropriate.

System connections

• Do not plug in the AC power cord until all other connections have been made.

• On each pair of input or output jacks, the lower jack (marked R) corresponds to the right channel, and the upper jack (marked L) to the left channel. Refer to the amplifier’s instruction manual for further information on connections.

To AC outlet

LINE IN LINE OUT

(REC) (PLAY)

LRLR

(REC)(PLAY)

Connecting to an amplifier

Connect the tape deck LINE IN jacks to the TAPE REC jacks on the rear panel of the amplifier and the tape deck LINE OUT jacks to the amplifier TAPE PLAY jacks. Refer to the amplifier’s instruction manual for further information on connections.

Amplifier

Power connections

REMOTE CONTROL

See "Connecting ONKYO components for z operation" on page 12.

(TA-RW144 only)

POWER

VOLTAGE SELECTOR

220-230V 120V

See "Power connections" below.

Switching power on

TA-RW144:

1. Plug the AC power cord into a wall outlet.

The STAND-BY indicator will light.

2. Press the POWER button.

The STAND-BY indicator will go out and the display will light.

POWER

STAND-BY

(TA-RW144) (TA-RW244)

MAIN POWER

STAND-BY

(TA-RW244 only)

STAND-BY/ON

STAND-BY

TA-RW244:

1. Plug the AC power cord into a wall outlet.

2. Press the MAIN POWER button.

The STAND-BY indicator will light.

3. Press the STAND-BY/ON button.

The STAND-BY indicator will go out and the display will light.

• Pressing the a or s button of either Deck A or Deck B when the unit is in standby status will also cause the display to light and playback will start.

• If the tape deck is plugged into the amplifier’s AC outlet, the amplifier’s AC power cord must be plugged into a wall outlet and its power switched on before the tape deck can operate.

+ 11 hidden pages

Onkyo TA-RW244-144 User Manual

TA-RW244/144

CONTENTS

Features

Important safeguards

Precautions

Control positions and names

Setting the voltage selector (Worldwide model only)

System connections

Power connections