Onkyo SB3220 Quick Manual

Quick GUIDE

Sound Bar

SB3220

Sound bar location

There are two options to locate your sound bar for optimum performance.

● On the table top located in front of your TV

● On the wall mounted below the TV using size(4x30mm) screws

Connecting audio sources your sound bar

Connecting via RCA-3.5mm Stereo Jack cable (provided)

● Using the RCA-3.5mm Stereo jack cable provided, connect the

matching color (red/white) plug to your source device’s composite
(red/ white) RCA audio out jack. Then connect the 3.5mm connector
plug into the 3.5mm input connector jack on the back of the sound bar.

● You can also use the RCA - 3.5mm stereo jack cable provided to

connect to the output port of any device that has a 3.5mm “audio out”
port and then connect the other end of the cable (RCA red/white)
connectors to the back of the sound bars component (red/white) RCA input jacks.

Connecting via the Toslink digital optical cable (provided)

● Using the Toslink optical cable, plug one end into your source device’s optical

output jack and the other end into the digital input jack on the back of your sound bar.

Connecting via to your sound bar

● Press and hold the Input button for 3-5 seconds to place the sound bar in the BT

search mode. The blue LED on the front of the sound bar will blink rapidly until the
device searched for is paired to the sound bar.

Connecting external powered subwoofer (optional)

● Connect external (powered) subwoofer with an RCA subwoofer cable (not provided)

from the subwoofer’s Sub-Out (or Sub-In depending on the external subwoofer) RCA
jack to the Sub-Out RCA jack on the rear of the sound bar. The Bass +/- buttons on
the remote control can be used to increase/decrease the bass level of the overall
sound bar/subwoofer system.

Connecting power to your sound bar

● Connect the DC(18V/2.5A) power connect to the back of your sound bar, then plug

in the wall supply into an AC (100~240V 50/60Hz) outlet

Sound bar controls

Sound bar buttons

1. Power Turns the sound bar On/Off.

2. Input Toggles through all 4 inputs (RCA/AUX/OPTICAL/BT).

3. Vol -- Decrease the volume level of the sound bar.

4. Vol+ Increases the volume level of the sound bar.
Note: Press and hold both Vol +/- at the same time will Mutes the bar. To un-Mute,
press the Vol- or Vol+ buttons on the sound bar or the remote control.

Remote control buttons

Power Turns the sound bar On/Off.
Input Toggles through all 4 inputs (RCA/AUX/OPTICAL/BT).
Vol - Decreases the volume level of the sound bar.
Vol+ Increases the volume level of the sound bar.
Mute Mute all the sound from sound bar.
Bass-- Decreases the bass level of the sound bar.
Bass+ Increases the bass level of the sound bar.

+

VOL

BASS

-

VOL

+

VOL

-

VOL

RC3220ONK

INPUT

Power

Input

Bass
Level Increase

Volume

Increase

Bass
Level Decrease

Volume

Decrease

Mute

Vol +Vol -

Input

Power Input Volume

Increase

Volume

Decrease

SUB R L

DC IN

18V 2.5A

SERVICE

OPTICAL AUX IN SUB R L

DC IN

18V 2.5A

STB/DVD/BD/Network Media Player

TV/STB/Tablet/MP3, etc…

OR