Onkyo HTP-938 User Manual

E

n

5.1ch Home Theater Speaker Package

HTP-938

Front speakers (SKF-980) Surround speakers (SKR-980) Center speaker (SKC-980)

(White)

Front speakers

*1

For magnetic shielding.

*2

Non-magnetic shielding.

*1

SKF-980

Speaker cables 3.5 m

Keyhole slot

Speaker
terminals

Wall Mounting

To mount the front/surround speakers vertically, use
the keyhole slot shown to hang each speaker on a
screw that’s securely screwed into the wall.

Keyhole slots for

wall mounting

SKF-980 SKR-980

Using the Cork Spacers for a More Stable Platform

We recommend using the supplied cork spacers to achieve the best possible
sound from your speakers. The cork spacers prevent the speakers from mov­ing, providing a more stable platform.

Cork spacers

Bottom of the
SKF-980

(Red)

To mount the center speaker horizontally, use the two
keyhole slots shown to hang each speaker on two
screws that are securely screwed into the wall.

Bottom of the SKC-980

Cork spacers

Surround speakers

Keyhole slots for wall mounting

SKC-980

260 mm

*2

SKR-980

(Blue)

Speaker cables 8.0 m

Keyhole slot

Speaker
terminals

(Gray)

Caution

Center speaker

Cork spacer (12 pcs.) for front and

SKC-980

Keyhole slots

• A mounting screw’s ability to support a speaker
depends on how well it’s anchored to the wall. If you
have hollow walls, screw each mounting screw into a
stud. If there are no studs, or the walls are solid, use
suitable wall anchors. Use screws with a head diameter
of 9 mm or less and a shank diameter of 4 mm or less.
With hollow walls, use a cable/pipe detector to check
for any power cables or water pipes before making any
holes.

• Leave a gap of between 5 mm and 10 mm between the wall and the base
of the screw head, as shown. (We recommend that you consult a home
installation professional.)

■ Attaching and detaching the speaker grilles

The front, center and surround
speakers have detachable grilles.

Removal

See the right illustrations to attach
or detach them.

*1

center speakers

Speaker terminals

Speaker cable 3.0 m

Replacement

(Green)

Wall

5 to 10 mm

Powered subwoofer (SKW-938)

RCA cable 3.0 m

Subwoofer

*2

Non-magnetic shielding.

■ Front

■ Rear

To AC outlet

Caution

• The front grille is not designed to be removed so does not attempt
to remove it forcibly, as this will damage it.

Note

• The Auto Standby function turns the subwoofer on when the input signal
exceeds a certain level. If the Auto Standby function does not work reli­ably, try slightly increasing or decreasing the subwoofer output level on
your receiver.

• If the Standby/On indicator lights (both red and blue LEDs) several sec­onds or minutes after the sound output stopped, this means that the amp
protection circuit has been activated. In this case, set the OUTPUT LEVEL
control to the center position, and disconnect the power cord from the AC
outlet. Wait at least 10 seconds, and then reconnect the power cord. If that
doesn’t solve the issue, contact your Onkyo dealer.

Setting the Subwoofer Level

Make sure the SKW-938 subwoofer’s output
level control is set at the “THX-POSITION”.
You can then adjust the level as needed.

*2

Standby/On indicator

Red: Subwoofer in standby mode
Blue: Subwoofer on
With the Auto Standby function, the
SKW-938 automatically turns on when
an input signal is detected in Standby
mode. When there’s no input signal for
a while, the SKW-938 automatically
enters Standby mode.

POWER switch

Press this switch to the ON position to
turn on the power. Press it to the OFF
position to turn off the power.

OUTPUT LEVEL control

This control is used to adjust the vol­ume of the subwoofer.

LINE INPUT

This RCA input should be connected to
the subwoofer pre out on your AV
receiver with supplied RCA cable.

Enjoying Home Theater

The Home Theater means that you can enjoy surround sound with a real sense of movement in your own home — just like being in
a movie theater or concert hall.

f cab

Corner
position

1/3 of wall
position

abFront left and right speakers (SKF-980)

They should be positioned facing the listener at about ear level, and equally
spaced from the TV. Angle them inward slightly so as to create a triangle, with
the listener at the apex.

c Center speaker (SKC-980)

Position it close to your TV (preferably on top) facing forward at about ear
level, or at the same height as the front left and right speakers.

deSurround left and right speakers (SKR-980)

Position them at the sides of the listener, or slightly behind, about 60 to 100 cm
above ear level. Ideally they should be equally spaced from the listener.

f Subwoofer (SKW-938)

The subwoofer handles the bass sounds of the LFE (Low-Frequency Effects)
channel. The volume and quality of the bass output from your subwoofer will
depend on its position, the shape of your listening room, and your listening
position. In general, a good bass sound can be obtained by installing the sub­woofer in a front corner, or at one-third the way along the front wall, as shown.

de

Connecting the Speakers

Surround

left

speaker

Surround

right

speaker

Front left

speaker

Front right

speaker

Center speaker

Specifications

■ Powered Subwoofer (SKW-938)

Typ e Acoustic suspension

Rated output power (IEC) 125 watts minimum continuous power,

Input sensitivity/impedance 280 mV / 20 kΩ

Frequency response 20 Hz to 100 Hz

Cabinet capacity 49 L

Dimensions (W × H × D) 380 mm × 444 mm × 429 mm

Wei ght 15.5 kg

Drivers unit 30 cm Cone Woofer

Power supply AC 230 V, 50 Hz

Power consumption 137 W

Other Auto Standby function

■ Front Speakers (SKF-980)

Typ e 2 Way Acoustic suspension

Impedance 8 Ω

Maximum input power 130 W

Sensitivity 83 dB/W/m

Frequency response 50 Hz to 45 kHz

Crossover frequency 2 kHz

Cabinet capacity 7.5 L

Dimensions (W × H × D) 158 mm × 433 mm × 199 mm

Wei ght 5.3 kg

Drivers unit 12 cm A-OMF Cone Woofer × 2

Te rm in al Binding post (Banana type supported)

Other Magnetic shielding

6 ohms, driven at 100 Hz with a
maximum total harmonic distortion of
1%

(incl. grille and projection)

(incl. grille and projection)

2.5 cm Soft Dome Tweeter × 1

■ Center Speaker (SKC-980)

Typ e 2 Way Acoustic suspension

Impedance 8 Ω

Maximum input power 130 W

Sensitivity 83 dB/W/m

Frequency response 50 Hz to 45 kHz

Crossover frequency 2 kHz

Cabinet capacity 7.5 L

Dimensions (W × H × D) 433 mm × 158 mm × 199 mm

Wei ght 5.3 kg

Drivers unit 12 cm A-OMF Cone Woofer × 2

Terminal Binding post (Banana type supported)

Other Magnetic shielding

(incl. grille and projection)

2.5 cm Soft Dome Tweeter × 1

■ Surround Speakers (SKR-980)

Typ e 2 Way Acoustic suspension

Impedance 8 Ω

Maximum input power 130 W

Sensitivity 81 dB/W/m

Frequency response 50 Hz to 45 kHz

Crossover frequency 2 kHz

Cabinet capacity 4.6 L

Dimensions (W × H × D) 200 mm × 275 mm × 169 mm

Wei ght 3.5 kg

Drivers unit 13 cm A-OMF Cone Woofer × 1

Terminal Binding post (Banana type supported)

(incl. grille and projection)

2.5 cm Soft Dome Tweeter × 1

Specifications and appearance are subject to change without
prior notice.

THX and the THX logo are trademarks of THX Ltd. which are regis­tered in some jurisdictions. All rights reserved.

Blue

Powered

subwoofer

Gray

RedWhite Green

Speaker Connection Precautions

Read the following before connecting your
speakers:

• Turn off your receiver before making any
connections.

• Pay close attention to speaker
wiring polarity. Connect positive
(+) terminals to only positive (+)
terminals, and negative (–) ter­minals to only negative (–) terminals. If the
speakers are wired incorrectly, the sound
will be out of phase and will sound unnatu­ral.

• Be careful not to short the positive and nega­tive wires. Doing so may damage your amp.

Note

• When you connect the surround back and front
high speakers, prepare for it separately.

Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: [phone] Fax: [phone]

ONKYO U.S.A. CORPORATION

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: [phone] Fax: [phone] http://www.us.onkyo.com/

ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: [phone] Fax: [phone] http://www.eu.onkyo.com/

ONKYO EUROPE ELECTRONICS GmbH (UK BRANCH)

The Coach House 81A High Street, Marlow, Buckinghamshire, SL7 1AB, UK
Tel: [phone] Fax: [phone]

ONKYO CHINA LIMITED
Unit 1 & 12, 9/F, Ever Gain Plaza Tower 1, 88, Container Port Road, Kwai Chung,
N.T., Hong Kong. Tel: [phone] Fax: [phone]

http://www.ch.onkyo.com/

SN 29400482

(C) Copyright 2010 ONKYO CORPORATION Japan. All rights reserved.

Y1006-1

* 2 9 4 0 0 4 8 2 *