Thank you for purchasing the Onkyo DV-SP303/
DV-SP303E DVD Player. Read this manual carefully before using your new DVD Player. A good
understanding of its features and operation will
allow you to achieve optimum performance and
enjoyment.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
RISQUE DE CHOC ELECTRIQUE
NE PAS
Important Safety Instructions
Read Instructions – All the safety and operating
instructions should be read before the appliance is
operated.
2.Retain Instructions – The safety and operating
instructions should be retained for future reference.
3.
Heed Warnings
and in the operating instructions should be adhered
to.
4.
Follow Instructions
instructions should be followed.
5.
Cleaning
let before cleaning. The appliance should be cleaned
only as recommended by the manufacturer.
6.Attachments—Do not use attachments not recommended by the appliance manufacturer as they may
cause hazards.
7.Water and Moisture—Do not use the appliance
near water –for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub; in a wet basement; or
near a swimming pool; and the like.
8.Accessories—Do not place the appliance on an
unstable cart, stand, tripod, bracket, or table. The
appliance may fall, causing serious injury to a child
or adult, and serious damage to the appliance. Use
only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the
appliance. Any mounting of the appliance should
follow the manufacturer’s instructions, and should
use a mounting accessory recommended by the manufacturer.
9. An appliance and cart combination should be moved with
care. Quick stops, excessive
force, and uneven surfaces
may cause the appliance and
cart combination to overturn.
10.Ventilation—Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or
covered. The openings should never be blocked by
placing the appliance on a bed, sofa, rug, or other
similar surface. The appliance should not be placed
in a built-in installation such as a bookcase or rack
– All warnings on the appliance
– All operating and use
—Unplug the appliance from the wall out-
PORTABLE CART WARNING
S3125A
unless proper ventilation is provided. There should
be free space of at least 5 cm (2 in.) and an opening
behind the appliance.
11.Power Sources—The appliance should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of
power supply to your home, consult your appliance
dealer or local power company.
12.Grounding or Polarization—The appliance may
be equipped with a polarized alternating current line
plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13.Power Cord Protection—Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where
they exit from the appliance.
14.Lightning—For added protection for the appliance
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the appliance
due to lightning and power-line surges.
15.Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as
this can result in a risk of fire or electric shock.
16.Object and Liquid Entry—Never push objects of
any kind into the appliance through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the appliance.
17.Servicing—Do not attempt to service the appliance
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
18.Damage Requiring Service—Unplug the appliance
form the wall outlet and refer servicing to qualified
service personnel under the following conditions:
AVIS
OUVRIR
2
Important Safety Instructions—Continued
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen
into the appliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the appliance to its normal operation,
E. If the appliance has been dropped or damaged in
any way, and
F. When the appliance exhibits a distinct change in
performance – this indicates a need for service.
19.Replacement Parts—When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
Precautions
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to
use this model properly, read this Instruction Manual
carefully. In case of any trouble, please contact the store
where you purchased the unit.
To prevent being exposed to the laser beam, do not try
to open the enclosure.
DANGER:
VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCK FAILED OR
DEFEATED. DO NOT STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
The label on the right is
applied on the rear panel
except for USA and Canadian
models.
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
For U.S. model
The laser is covered by a housing which prevents exposure during operation or maintenance. However, this
product is classified as a Laser Product by CDRH (Center for Devices and Radiological Health) which is a
department of the Food and Drug Administration.
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20.Safety Check—Upon completion of any service or
repairs to the appliance, ask the service technician to
perform safety checks to determine that the appliance is in proper operation condition.
21.Wall or Ceiling Mounting—The appliance should
be mounted to a wall or ceiling only as recommended by the manufacturer.
22.Heat—The appliance should be situated away from
heat sources such as radiators, heat registers, stoves,
or other appliances (including amplifiers) that produce heat.
23.Liquid Hazards—The appliance should not be
exposed to dripping or splashing and no objects
filled with liquids, such as vases should be placed on
the appliance.
According to their regulations 21 CFR section 1002.30,
all manufactures who sell Laser Products must maintain
records of written communications between the manufacturer, dealers and customers concerning radiation
safety. If you have any complaints about instructions or
explanations affecting the use of this product, please
feel free to write to the address on the back page of this
manual. When you write us, please include the model
number and serial number of your unit.
In compliance with Federal Regulations, the certification, identification and the period of manufacture are
indicated on the rear panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
3
Precautions—Continued
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different from
• that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For Canadian model
NOTE:
Canadian ICES-003.
For models having a power cord with a polarized plug:
CAUTION:
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
This class B digital apparatus complies with
TO PREVENT ELECTRIC SHOCK,
Modèle pour les Canadien
REMARQUE:
est conforme à la norme NMB-003 du Canada.
Sur les modèles dont la fiche est polarisee:
ATTENTION:
TRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
Cet appareil numérique de la classe B
POUR ÉVITER LES CHOCS ÉLEC-
For British models
Replacement and mounting of an AC plug on the power
supply cord of this unit should be performed only by
qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance
with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or
coloured red.
IMPORTANT
The plug is fitted with an appropriate fuse. If the fuse
needs to be replaced, the replacement fuse must
approved by ASTA or BSI to BS1362 and have the same
ampere rating as that indicated on the plug. Check for
the ASTA mark or the BSI mark on the body of the fuse.
If the power cord’s plug is not suitable for your socket
outlets, cut it off and fit a suitable plug. Fit a suitable
fuse in the plug.
For European Models
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding technical standards such as EN60065,
EN55013, EN55020 and EN61000-3-2, -3-3.
GROEBENZELL, GERMANY
I. MORI
ONKYO EUROPE ELECTRONICS GmbH
1. Region Numbers
The DVD standard uses region numbers to control how
discs can be played around the world, the world being
divided into six regions. This unit will only play DVD
discs that match its region number, which can be found
on its rear panel (e.g., ).
2. About this Manual
This manual explains how to use all of this unit’s functions. Although the DVD standard offers many special
features, not all discs use them all, so depending on the
disc being played, this unit may not respond to certain
functions. See the disc’s sleeve notes for supported features.
When you attempt to use a DVD feature that is
not available, this logo may appear onscreen,
indicating that the feature is not supported by
the current disc or this unit.
3. Recording Copyright
Unless it’s for personal use only, recording copyrighted
material is illegal without the permission of the copyright holder.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SECTION
CAREFULLY.
AC outlet voltages vary from country to country. Make
sure that the voltage in your area meets the voltage
requirements printed on this unit’s rear panel (e.g., AC
120 V, 60 Hz).
1
4
Precautions—Continued
5. Never Touch this Unitwith Wet Hands
Never handle this unit or its power cord while your
hands are wet or damp. If water or any other liquid gets
inside this unit, have it checked by your Onkyo dealer.
6. Installing this Unit
• Install this unit in a well-ventilated location.
Ensure that there’s adequate ventilation all around
this unit, especially if it’s installed in an audio rack. If
the ventilation is inadequate, the unit may overheat,
leading to malfunction.
• Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may rise,
shortening the life of the optical pickup.
•Avoid damp and dusty places, and places subject to
vibrations from loudspeakers. Never put the unit on
top of, or directly above a loudspeaker.
• Install this unit horizontally. Never use it on its side or
on a sloping surface, because it may cause a malfunction.
• If you install this unit near a TV, radio, or VCR, the
picture and sound quality may be affected. If this
occurs, move this unit away from the TV, radio, or
VCR.
7. Care
Occasionally, you should dust this unit all over with a
soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water.
Dry the unit immediately afterwards with a clean cloth.
Do not use abrasive cloths, thinners, alcohol, or other
chemical solvents, because they may damage the finish
or remove the panel lettering.
8. Handling Notes
• If you need to transport this unit, use the original packaging to pack it how it was when you originally bought
it.
• Do not use volatile liquids, such as insect sprays, near
this unit. Do not leave rubber or plastic items on this
unit for a long time, because they may leave marks on
the case.
• This unit’s top and rear panels may get warm after prolonged use. This is normal.
• When you’ve finished using this unit, remove all discs
and turn off the power.
• If you do not use this unit for a long time, it may not
work properly the next time you turn it on, so be sure
to use it occasionally.
9. To Obtain a Clear Picture
This unit is a high-tech, precision device. If the lens on
the optical pickup, or the disc drive mechanism
becomes dirty or worn, the picture quality may be
affected. To maintain the best picture quality, we recommend regular inspection and maintenance (cleaning or
worn part replacement) every 1,000 hours of use
depending on the operating environment. Contact your
Onkyo dealer for details.
10. Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
When you take a glass containing a cold drink outside
on a summer’s day, drops of water, called condensation,
form on the outside of the glass. Similarly, moisture
may condense on the lens of the optical pickup, one of
the most important parts inside this unit.
• Moisture condensation can occur in the following situations:
— The unit is moved from a cold place to a warm
place.
—A heater is turned on, or cold air from an air con-
ditioner is hitting the unit.
— In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
— The unit is used in a humid place.
• Do not use this unit when there’s the possibility of
moisture condensation occurring. Doing so may damage your discs and certain parts inside this unit.
If condensation does occur, remove all discs and
leave this unit turned on for two to three hours. By
this time, the unit will have warmed up and any condensation will have evaporated. To reduce the risk of
condensation, keep this unit connected to a wall outlet.
5
Table of Contents
Basic Operation
Overview
Important Safety Instructions.............................. 2
JPEG/DivX Video)
(North American models do not support DivX Video)
Video
• Advanced 54 MHz/10-bit video D/A converter
• Component video output
• S-Video and composite video outputs
• Frame-by-frame playback
• Slow motion playback
•Fast forward and reverse
• Repeat playback
• Random playback
• Supports 4:3 and 16:9 aspect ratio TVs
• Multiple camera angle support
•Parental Lock function
• Screen Saver function
Audio
• 192 kHz/24-bit D/A converter
• Coaxial digital output
• Optical digital output (Asian and Oceanian models
only)
Others
• Dynamic Range Control setting
• Full-function remote controller
*2
*3
/
The letter displayed at the end of the product name found in
catalogs and on package represents the color of the DV-SP303/
DV-SP303E DVD player. Though the color varies, the specifications and operations are the same.
*1. Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
*2. “DTS” and “DTS Digital Out” are trademarks of Digital The-
ater Systems, Inc.
*3. Windows Media, and the Win-
dows logo are trademarks, or
registered trademarks of
Microsoft Corporation in the
United States and/or other countries.
7
Introduction—Continued
Disc Notes
Supported Discs
The DV-SP303/DV-SP303E supports the following
discs.
DiscLogoFormat or file type
DVD-Video
DVD-R
DVD-RW
Video CD
Audio CD
CD-R
CD-RW
JPEG CDJPEG
• Some audio CDs feature copy protection that doesn’t
conform to the official CD standard. Since these are
nonstandard discs, they may not play properly in the
DV-SP303/DV-SP303E.
• The DV-SP303/DV-SP303E supports CD-R and
CD-RW discs recorded in Video CD format, audio CD
format, or ISO 9660 Level 1 or 2 format with MP3,
WMA, and JPEG files. It also supports DVD-R and
DVD-RW discs recorded in DVD-Video format. However, some CD-R, CD-RW, DVD-R, and DVD-RW
discs may not work properly for any of the following
reasons: incomplete disc finalization, disc burner
characteristics, disc characteristics, the disc is damaged or dirty. See the manual supplied with your disc
burner for more information. Condensation or dirt on
the optical pickup lens can also affect playback.
• The DV-SP303/DV-SP303E supports 8 cm and 12 cm
discs.
• The DV-SP303/DV-SP303E does not support disc
types not listed.
• Don’t use discs with an unusual shape, such as those
shown below, because you may damage the DVSP303/DV-SP303E.
See page 47 for
region information.
DVD-Video
DVD-Video,
VR format
Including PBC
PCM and DTS
Video CD, audio CD,
MP3, WMA, JPEG
Video CD, audio CD,
MP3, WMA, JPEG
• Don’t use discs that have residue from adhesive tape,
rental discs with peeling labels, or discs with custommade labels or stickers. Doing so may damage the DVSP303/DV-SP303E and you may not be able to
remove the disc properly.
Discs Made on Personal Computers
Discs made on personal computers, including those of a
compatible format, may not work properly in the DVSP303/DV-SP303E because of incorrect settings in the
disc burning software. Check the manuals supplied with
your disc burning software for additional compatibility
information.
CD-R/RW compatibility
• Compatible formats: CD-Audio, Video CD, ISO 9660
CD-ROM* containing MP3, WMA or JPEG files
* ISO 9660 Level 1 or 2 compliant. CD physical format:
Mode1, Mode2 XA Form1. Romeo and Joliet file systems
are both compatible with this player.
• Multi-session playback: No
• Unfinalized disc playback: No
DVD-R/RW compatibility
• Compatible formats: DVD-Video, Video Recording
(VR)*
* Edit points may not play exactly as edited; screen may go
momentarily blank at edited points.
• Unfinalized playback: No
• WMA/MP3/JPEG file playback on DVD-R/RW: No
Compressed audio compatibility
• Compatible formats: MPEG-1 Audio Layer 3 (MP3),
Windows Media Audio (WMA)
• Sampling rates: 32, 44.1 or 48kHz
• Bit-rates: Any (128Kbps or higher recommended)
• VBR (variable bit rate) MP3 playback: No
• VBR WMA playback: No
• WMA lossless encoding compatible: No
• DRM (Digital Rights Management) compatible: Yes
(DRM-protected audio files will not play in this
player—see also DRM in the “Glossary” on page 50)
• File extensions: .mp3, .wma (these must be used for
the player to recognize MP3 and WMA files – do not
use for other file types)
• File structure: Up to 299 folders; up to 648 folders and
files combined
8
Introduction—Continued
About WMA
WMA is an acronym for Windows Media Audio and
refers to an audio compression technology developed by
Microsoft Corporation. WMA content can be encoded
by using Windows Media
dows Media
Media
Microsoft, Windows Media, and the Windows logo are
trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
®
Player for Windows® XP, or Windows
®
Player 9 Series.
®
Player version 7, 7.1, Win-
About DivX
DivX is a compressed digital video format created by the
®
DivX
video codec from DivXNetworks, Inc. This
player can play DivX video files burned on CD-R/RW/
ROM discs. Keeping the same terminology as DVDVideo, individual DivX video files are called “Titles”.
When naming files/titles on a CD-R/RW disc prior to
burning, keep in mind that by default they will be played
in alphabetical order.
Note:
• North American models do not support DivX Video.
Displaying DivX subtitle files
The font sets listed below are available for DivX external
subtitle files. You can see the proper font set on-screen by
setting the Subtitle Language (in Language settings on
page 42) to match the subtitle file.
This player supports the following language groups:
Group 1: Albanian (sq), Basque (eu), Catalan (ca), Dan-
ish (da), Dutch (nl), English (en), Faroese (fo), Finnish
(fi), French (fr), German (de), Icelandic (is), Irish (ga),
Italian (it), Norwegian (no), Portuguese (pt), RhaetoRomanic (rm), Scottish (gd), Spanish (es), Swedish (sv)
Group 2: Albanian (sq), Croatian (hr), Czech (cs), Hungarian (hu), Polish (pl), Romanian (ro), Slovak (sk), Slovenian (sl)
Group 3: Bulgarian (bg), Byelorussian (be), Macedonian (mk), Russian (ru), Serbian (sr), Ukrainian (uk)
Group 4: Hebrew (iw), Yiddish (ji)
Group 5: Turkish (tr)
DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc. and are used under
license.
• Some external subtitle files may be displayed incor-
rectly or not at all.
•For external subtitle files the following subtitle format
filename extensions are supported (please note that
these files are not shown within the disc navigation
menu): .srt, .sub, .ssa, .smi
• The filename of the movie file has to be repeated at the
beginning of the filename for the external subtitle file.
• The number of external subtitle files which can be
switched for the same movie file is limited to a maximum of 10.
DivX video compatibility
•Official DivX® Certified product.
• Plays DivX
video content (in compliance with DivX
technical requirements).
• File extensions: .avi and .divx (these must be used for
the player to recognize DivX video files). Note that all
files with the .avi extension are recognized as MPEG4,
but not all of these are necessarily DivX video files
and therefore may not be playable on this player.
DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc. and are used under license.
®
5, DivX® 4, DivX® 3 and DivX® VOD
®
Certified
JPEG file compatibility
• Compatible formats: Baseline JPEG and EXIF 2.2*
still image files up to a resolution of 3072 x 2048.
* File format used by digital still cameras
• Progressive JPEG compatible: No
• File extensions: .jpg (must be used for the player to
recognize JPEG files – do not use for other file types)
• File structure: Up to 299 folders; up to 648 folders and
files combined
PC-created disc compatibility
Discs recorded using a personal computer may not be playable in this unit due to the setting of the application software
used to create the disc. In these particular instances, check
with the software publisher for more detailed information.
Discs recorded in packet write mode (UDF format) are
not compatible with this player.
Check the DVD-R/RW or CD-R/RW software disc
boxes for additional compatibility information.
Copyright
It is forbidden by law to copy, broadcast, show, broadcast
on cable, play in public, or rent copyrighted material
without permission.
DVD-Video discs are copy-protected, and any recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright-protection technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
9
Introduction—Continued
Handling Discs
•Never touch the underside of a disc. Always hold discs
by the edge, as shown.
Underside
•Never attach adhesive tape or sticky labels to discs.
Cleaning Discs
•For best results, keep your discs clean. Fingerprints
and dust can affect the sound and picture quality and
should be removed as follows. Using a clean soft
cloth, wipe from the center outwards, as shown. Never
wipe in a circular direction.
Storing Discs
• Don’t store discs in places subject to direct sunlight, or
near heat sources.
• Don’t store discs in places subject to moisture or dust,
such as in a bathroom or near a humidifier.
•Always store discs in their cases and vertically. Stacking, or putting objects on unprotected discs may cause
warping, scratches, or other damage.
✔
•To remove stubborn dust or dirt, wipe the disc with a
damp soft cloth, and then dry it with a dry cloth.
•Never use solvent-based cleaning fluids, such as thinner or benzine, commercially available cleaners, or
antistatic sprays intended for vinyl records, because
they may damage the disc.
10
Before Using the DV-SP303/DV-SP303E
Installing the Batteries
Open the battery compartment, as shown.
1
Insert the two supplied batteries (AA) in
2
accordance with the polarity diagram
inside the battery compartment.
Close the battery compartment.
3
Notes:
• The supplied batteries should last for about six
months, although this will vary with usage.
• If the remote controller doesn’t work reliably, try
replacing both batteries.
• Don’t mix new and old batteries, or different types of
batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent possible leakage
and corrosion.
• Flat batteries should be removed as soon as possible to
prevent possible leakage and corrosion.
Using the Remote Controller
To use the remote controller, point it at the DV-SP303/
DV-SP303E’s remote control sensor, as shown below.
Remote control sensor
STAN
DB
Y/
ON
30˚
Notes:
• The remote controller may not work reliably if the
DV-SP303/DV-SP303E is subjected to bright light,
such as direct sunlight or inverter-type fluorescent
lights. Keep this in mind when installing the DVSP303/DV-SP303E.
• If another remote controller of the same type is used in
the same room, or the DV-SP303/DV-SP303E is
installed close to equipment that uses infrared rays,
the remote controller may not work reliably.
• Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.
• The remote controller may not work reliably if the
DV-SP303/DV-SP303E is installed in a rack behind
colored glass doors. Keep this in mind when installing
the DV-SP303/DV-SP303E.
• The remote controller will not work if there’s an obstacle between it and the DV-SP303/DV-SP303E’s
remote control sensor.
DV-SP303/DV-SP303E
O
P
E
N
/C
LO
SE
30˚
PL
A
Y
Approx. 5 m
11
Front & Rear Panels
For detailed information, refer to the pages in brackets.
Front Panel
15672 384
STANDBY/ON
A STANDBY/ON button [22, 24]
This button is used to set the DV-SP303/DVSP303E to On or Standby.
B (pause) button [25]
This button is used to pause playback.
C (stop) button [25]
This button is used to stop playback.
D/ (previous/next) buttons [25]
The Previous button is used to select the previous
chapter or track. During playback it selects the
beginning of the current chapter or track.
The Next button is used to select the next chapter or
track.
PLAYOPEN/CLOSE
E Disc tray [24]
Discs are loaded here.
F (OPEN/CLOSE) button [24]
This button is used to open and close the disc tray.
G Remote control sensor [11]
This sensor receives control signals from the remote
controller.
H (PLAY) button [24, 25]
This button is used to start playback.
12
Front & Rear Panels—Continued
Display
23456781
9
1 Pause indicator
This indicator appears when playback is paused.
2 Play indicator
This indicator is shown during playback.
3 CHP indicator
This indicator appears while the number of the current chapter is being displayed.
4 TITLE indicator
While stopped, the total number of titles on the current DVD-Video disc is displayed here. During
playback, the number of the current title is displayed.
5 Camera angle indicator
This indicator appears if the DVD-Video disc being
played features multiple camera angles.
6 PRGSVE (Progressive) indicator
This indicator appears when the Progressive Scanning function is on.
7 Repeat indicator
This indicator appears when A–B playback or
repeat playback is used.
8 REMAIN indicator
This indicator appears while the remaining time is
being displayed.
9 Message & time area
Time information, such as total time, remaining
time, and so on, is displayed here in hours, minutes,
and seconds. Other messages are also displayed.
13
Front & Rear Panels—Continued
Rear Panel
DV-SP303 North American model
2 3 465
DV-SP303 Asian and Oceanian models
12 3 4865
DV-SP303E European model
2 3 48765
A OPTICAL DIGITAL AUDIO OUT [21] (not
North American and European models)
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
B COAXIAL DIGITAL AUDIO OUT [21]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C S VIDEO VIDEO OUT[20]
This connector can be used to connect a TV or projector with an S-Video input.
D COMPONENT VIDEO OUT [20]
These sockets output component video and can be
connected to an component video input on a TV or
projector.
E VIDEO OUT [18]
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
F ANALOG AUDIO OUT [18]
These RCA/phono connectors can be connected to
analog audio inputs on your TV, hi-fi amp, or AV
receiver.
G AV CONNECTOR [20] (European model only)
This SCART output can be connected to a TV or
projector with a SCART input by using the supplied
SCART cable. This SCART connector outputs 2channel stereo audio, composite video, S-Video,
and RGB video.
H AC INLET [22] (not North American model)
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
14
Front & Rear Panels—Continued
Remote Controller
1
2
3
4
5
6
7
8
9
J
K
ON STANDBY
123
45
789
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE ZOOM
0
ENTER
RC-616DV
6
CLEAR
OPEN/
CLOSE
DISPLAY
PLAY
MODE
MENU
SETUP
L
M
N
O
P
Q
R
S
T
U
V
W
A STANDBY button [22]
This button is used to set the DV-SP303/DVSP303E to Standby.
B ON button [22]
This button is used to turn on the DV-SP303/DVSP303E.
Don’t turn on the DV-SP303/DV-SP303E until
you’ve completed, and double checked all connections (pages 17–21).
C Number buttons [25–27, 35, 43]
These buttons are used to enter title, chapter, and
track numbers and to enter times for locating specific points in time.
D TOP MENU button [26]
This button is used to display the top menu on a
DVD-Video disc.
E Cursor /// buttons [23]
These buttons are used to navigate onscreen menus.
F RETURN button [23, 26]
This button is used to return to the main menu without saving your changes.
G AUDIO button [36]
This button is used to select foreign language
soundtracks and audio formats (e.g., Dolby Digital
or DTS) on DVD-Video discs.
For Video CDs you can select left-channel, rightchannel, or stereo.
H ANGLE button [37]
This button is used to select camera angles on
DVD-Video discs.
I Stop button [25]
This button is used to stop playback.
J Fast Reverse / () button [25, 28,
29]
This button is used for fast reverse, reverse slow
motion, and reverse frame-by-frame playback.
15
Front & Rear Panels—Continued
K Fast Forward / () button [25, 28,
29]
This button is used for fast forward, slow motion,
and frame-by-frame playback.
L OPEN/CLOSE button [24]
This button is used to open and close the disc tray.
M PLAY MODE button [32–35]
This button is used to open and close the Play Mode
menu.
N DISPLAY button [37]
This button is used to display information about the
current disc, title, chapter, or track, including the
elapsed time, remaining time, total time, and so on.
Press it repeatedly to display more information.
O CLEAR [34]
This button is used to cancel various functions.
P MENU button [26]
This button is used to display the menu on a
DVD-Video disc or to open the Disc Navigator
when using a Video CD, audio CD, DivX Video,
WMA/MP3/JPEG disc, or VR format DVD-RW
disc.
Q ENTER button [23]
This button is used to start playback of the selected
title, chapter, or track, and to confirm settings.
R SETUP button [24, 38–40]
This button is used to open and close the onscreen
setup menus.
S ZOOM button [37]
This button is used with the Zoom function.
T SUBTITLE button [36]
This button is used to select subtitles on
DVD-Video discs.
U Pause button [25, 28, 29]
This button is used to pause playback.
V Previous/Next / buttons [25]
The Previous button is used to select the previous
chapter or track. During playback it selects the
beginning of the current chapter or track.
The Next button is used to select the next chapter or
track.
W Play button [25]
This button is used to start playback.
16
Connecting the DV-SP303/DV-SP303E
Before Making Any Connections
• Read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed
all audio and video connections.
Optical Digital Output (not North American
and European models)
The optical digital connector is fitted with protective cap.
Before connecting a cable, remove the cap and keep it
safely. When you disconnect the cable, put the cap back
in.
AV Cables & Connectors
Video
C
R
P
R
//
C
B
P
B
Y
Component
video
R
P//
R
C
C
B
P
B
Y
RCA/phono AV Connection Color Coding
RCA/phono AV connections are usually color coded:
red, white, and yellow. Use red plugs to connect rightchannel audio inputs and outputs (typically labeled “R”).
Use white plugs to connect left-channel audio inputs and
outputs (typically labeled “L”). And use yellow plugs to
connect composite video inputs and outputs.
Right (red)
Left (white)
(Yellow)
• Push each plug in all the way to
make a good connection (loose
connections can cause noise or
malfunctions).
•To prevent interference, keep
audio and video cables away from
power cords and speaker cables.
Component video separates the luminance (Y) and
color difference signals (P
picture quality. Some TV manufacturers label their
component video inputs differently.
Analog audio
Right (red)
Left (white)
Composite video
(Yellow)
Right!
Wrong!
R, PB), providing the best
S-Video
Composite
video
Scart
(European
model only)
Audio
Optical digital
(not North
American and
European
models)
Coaxial digital
Analog
S-Video provides better picture quality than composite video.
Composite video can be found on virtually all TVs,
VCRs, and video equipment.
SCART connections carry audio and video (composite, S-Video, RGB) all in one cable.
Optical digital audio connections provide better
audio quality than analog connections.
Coaxial digital audio connections provide better
audio quality than analog connections.
RCA/phono analog audio connectors can be found
on virtually all AV components.
17
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.