Onkyo DV-HD805 User Manual
Firmware Update Information for Owners of Onkyo HD DVD Player:
Model DV-HD805
Firmware Update Version: 2.8
Applicable Models: DV-HD805
Overview: As part of our commitment to provide world-class service to our customers, Onkyo is supplying this firmware
update for use by purchasers of the Onkyo HD DVD player model DV-HD805.
This firmware update covers the following items:
Compliance with 50Hz formatted HD DVD disc
•
Adds auto detection mode of 1080/24p content disc
•
Compliance with playback of Advanced Video Contents ( Non-AACS ) for HD DVD-R
•
Important Note: Certain HD DVD discs may contain or have the capability of downloading studio-provided, webenabled network content. To minimize any potential compatibility and/or connectivity issues, before viewing such
content, it is recommended that you perform the firmware update process to ensure that your HD DVD player is
using the latest firmware version.
How to obtain and install the firmware update:
1. If you have a broadband internet service, you may obtain the firmware update over the internet using the Ethernet
port on the back of your HD DVD Player. Instructions for configuring the Ethernet port and downloading the firmware
update can be found in the owner's manual and Update Procedure sheet for your HD DVD player. Please review
these before you commence the firmware update process. Set out below is an overview of the process:
BEFORE BEGINNING THE FIRMWARE UPDATE PROCESS, BE SURE TO REMOVE ANY DISCS FROM
•
YOUR HD DVD PLAYER.
Please configure the Ethernet port. You may need to turn on DHCP and DNS.
•
After you have configured the Ethernet port, follow the directions in the owner’s manual to check for a firmware update.
•
If a firmware update is available for your HD DVD player, it will take about 30 - 60 minutes to download and install.
•
If a firmware update is available for your HD DVD player, then:
•
i) A message will appear, and the firmware update will automatically start.
ii) When the firmware update is completed, the HD DVD player will automatically turn itself off.
DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR HD DVD PLAYER DURING THE
•
FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the firmware update to the HD DVD player
to be halted and the HD DVD player may no longer operate properly.
If the HD DVD player stops working, please contact an ONKYO distributor referring to Onkyo SUPPORT website.
<http://www.intl.onkyo.com/support/local_support/index.html>
Please note, Onkyo’ s terms and conditions that applied to your acquisition, ownership, possession and use of
the HD DVD player will apply (with the appropriate changes) to the firmware updates. By uploading the firmware
updates to your HD DVD player, you expressly agree to the same.
• If no firmware update is available, the HD DVD player will quickly exit the update process.
• Please refer to the owner’s manual and Update Procedure sheet for additional details.
2. If you are unable, or prefer not, to obtain the firmware update by the method described above, you may contact
an ONKYO distributor referring to Onkyo SUPPORT website. <http://www.intl.onkyo.com/support/local_support/index.html>
and request that a firmware update disc be sent to you by mail. You can update the firmware using the firmware update
disc by following the instructions provided with the disc.
Frequently Asked Questions:
Q1. What does this update do?
A1.
This firmware update covers the following items:
Compliance with 50Hz formatted HD DVD disc
•
Add auto detection mode of 1080/24p content disc
•
Compliance with playback of Advanced Video Contents ( Non-AACS ) for HD DVD-R
•
Q2. Why do I need to turn on DHCP and DNS?
A2. Turning on DHCP causes the HD DVD player to automatically detect its IP address and other network information
from your internet service provider's DHCP server. Turning on DNS causes the HD DVD player to automatically
detect the DNS server address associated with your internet service provider.
Q3. I purchased an HD DVD disc that contains/has the capability of downloading web-enabled network content. What do
I need to do to view this content?
A3.
First, be sure that you have properly configured the HD DVD player's Ethernet port. If your Ethernet port is properly
configured, you should then perform the firmware update process to update the HD DVD player's firmware to the
latest firmware version. Once you have updated the HD DVD player with the latest firmware, follow the directions
that came with the HD DVD disc or that appear in the menu of the HD DVD disc. Should you experience problems
viewing such content, please contact an ONKYO distributor referring to Onkyo SUPPORT website.
<http://www.intl.onkyo.com/support/local_support/index.html>
Q4. When I connect my HD DVD Player to my HDTV or HD Monitor using a HDMI to DVI adaptor cable or a HDMI to DVI
adaptor, the output resolution of the player remains fixed at 480i. Does the new firmware address this issue?
A4. This firmware update addresses the issue. Should you continue to experience problems, please contact an ONKYO
distributor referring to Onkyo SUPPORT website. <http://www.intl.onkyo.com/support/local_support/index.html>
Q5. The HDMI output does not work or works intermittently with the HDMI or DVI input on my HDTV or monitor. Does the
new firmware address that issue?
A5. The firmware update addresses and improves HDMI and DVI connectivity issues. If you still experience such issues,
try disconnecting and reconnecting the HDMI cable. Make sure your display input is set to HDMI (or DVI). If your
display has more than one HDMI/DVI input, make sure that all connected HDMI/DVI source devices are powered on
(even if not in use). If none of these solve the issue, please turn off the TV and the HD DVD player. Check all
connections. Disconnect and reconnect the HDMI cable. Turn on the TV first and then turn on the HD DVD player.
Should you continue to experience issues, please contact an ONKYO distributor referring to Onkyo SUPPORT website.
<http://www.intl.onkyo.com/support/local_support/index.html>
Q6. During HD DVD playback I sometimes experience pixelization, block noise or audio dropouts. Sometimes playback
freezes or stops. Sometimes, playback is not smooth. Does the new firmware address these issues?
A6. This firmware update addresses various playability issues. You should also check to be sure that the disc is clean
and, if the disc will not operate at all, that you are inserting the disc with the right side up. In the event that playback
freezes or stops, press and hold the ON/STANDBY button on the front of the HD DVD player for approximately ten
seconds. This will cause the HD DVD player to turn off. After the HD DVD player turns off, turn the HD DVD player
back on by pressing the ON/STANDBY button, and then press the OPEN/CLOSE button to remove the disc.
Should you continue to experience issues, please contact an ONKYO distributor referring to Onkyo SUPPORT website.
<http://www.intl.onkyo.com/support/local_support/index.html>
Q7. Do I need to install prior firmware updates before installing the current firmware update?
A7. No. The current firmware update includes all of the prior firmware updates.
Loading...