URC 4063
Easy 4
User Manual
Previous Model Name:
Overview
Thank you for purchasing the
universal remote control. Before you can use
your new remote, you will need to program it to
operate the specific home entertainment
components you wish to control. Follow the
instructions detailed in this manual to set up your
One For All ® Easy 4
control.
Features and Functions
The illustration below and the chart immediately
after describe the features and functions of the
One For All ® Easy 4
the drawing to locate each key on the remote,
then refer to the chart for a description of the
corresponding function each key performs.
and enjoy your new remote
universal remote control. Use
SETUP
CBL/SAT
AUDIO MENU
VOL VOL
MENU
L
FAV CH
ENTER TV/VCR
REC
REW FF
Big Easy Select
One For All ® Easy 4
POWER
VCR/LD
TV
MENU +
+
CH
M
S
T
E
C
L
E
_
CH
MENU –
PLAY
STOP
PREV CH
PAUSE
MENU
R
Feature Function
The Red Light (LED) flashes red to
show that the remote is working.
The SETUP key is used to program
your
SETUP
VOL
VOL
M
S
T
E
C
L
E
POWER
ENTER
TV/VCR
0- 9
0- 9
TV VCR/LD
CBL/SAT AUDIO
MENU
STOP
SEE
BELOW
FAV CH
PREV CH
PAUSE
REC
PLAY
REW
STOP
CH
CH
FF
One For All ® Easy 4
The GLOW keys: VOL +/- (Volume Up
+
and Down), CH +/- (Channel Up and
_
Down), M (Mute), PO WER, TV/VCR,
ENTER and the Digit Keys (0-9)
operate the same as on your original
remote. These keys are made of a
phosphorescent material that
Glows-in-the-dark. To activate the
“GLOW” Feature, you must expose
the GLOW Keys to bright light. The
length of time the GLOW Keys
remain illuminated will be determined by the length of time the
remote is exposed to bright light.
The TV, VCR/LD, CBL/SAT, and A UDIO
keys are used to select the home
entertainment component you want
to control.
The MENU key operates the same as
the MENU or OSD (On Screen
Display) key on your original remote.
When you press the MENU key, your
One For All
the menu mode and enables the
CH +/- and VOL +/- keys to navigate
through your menu. Pressing one of
the device keys will exit the remote
control’s menu mode and revert CH
+/- and VOL +/- to their original
functions. If your original remote
control had a SELECT key, for use in
your menu, try M (Mute) or ENTER.
Please consult the original owners
manual of your home entertainment
component for more detailed
instructions on accessing and
navigating your on-screen menus.
The FAV CH (Favorite Channel) key
allows you to program your
All ® Easy 4
favorite channels.
The PREV CH (Previous Channel) key
operates the same as the LAST
CHANNEL or RECALL key on your
original remote.
The REC (Record), PAUSE, REW
(Rewind), PLAY, FF (Fast Forward), and
STOP keys operate the same as the
keys on your original VCR and CD
Player remote. As a safety feature
on the
One For All ® Easy 4
press the REC key twice.
.
®
Remote Control enters
One For
with up to 10 of your
, you must
Installing the Batteries
Your
One For All ® Easy 4
batteries. To install the batteries:
1
2
3
4
POWER
NOTE: Removing the batteries for more than 15 minutes will
require you to reprogram your remote.
requires four (4) new AAA alkaline
®
On the back of the
push down on the tab and lift the battery
cover of f.
Match the + and - marks on the batteries
to the + and - marks in the battery case,
then insert the batteries.
Press the battery cover back into place.
Test the unit by pressing POWER. If the
batteries are inserted correctly, the red light
(LED) will blink once.
One For All
Easy 4
,
Setting Up Your Components
Programming the
your TV:
Locate the brand name of your TV and then write
it in the space below.
TV Brand: ______________________________________
Locate the brand name of your TV in the “SETUP
CODES FOR TVs” section. The brands are listed in
alphabetical order with the most popular codes
listed first. You will use one of these codes to
program your One For All Easy 4 to operate your TV.
To program the One For All Easy 4 to operate your
TV:
1 Turn on your TV.
2 Press TV and release. Press and hold
TV SETUP
3 Enter the first three-digit TV code listed
4 Aim the
5 Your
Remember, if you want to use your
Easy 4
to operate your TV, press the TV key first.
One For All ® Easy 4
SETUP until the
One For All ® Easy 4’s
to operate
red
light blinks twice, then release SETUP.
for your brand in the “Set-Up Codes for
TVs” section. If you perform this
procedure correctly, the red light will
blink twice when you enter the final
digit of your code.
One For All ® Easy 4
at your TV
and press POWER. Your TV should turn
off. If your TV does not respond, repeat
Steps 2-4, trying each code listed for
your brand until you find the one that
operates your TV.
One For All ® Easy 4
is now
programmed to operate your TV. Write
your TV code in the boxes to the left for
future reference.
One For All
®
Set-Up Codes for TVs
Attention Consumers
DO NOT USE the MENU- key on your
by Mitsubishi in 1996 or 1997, or on any TV manufactured in 1996 or 1997 using TV code 150. In
STOP
1996, Mitsubishi changed the frequency used to operate the menu down feature on these TVs.
Consequently, using the MENU- key on your
Mitsubishi TVs or with TVs using TV Code 150 will put your TV in a service mode. Universal
Electronics Inc. assumes no responsibility for this change in the manufacturer’s design or for any
damage to your TV or any other damages that you incur as a result of these changes.
One For All ® Easy 4
One For All ® Easy 4 remote control
remote control with TVs manuf actured
with these
A-Mark 003
Admiral 093, 016, 180,
Adventura 046
Aiko 092
Akai 030, 056, 145,
Alleron 179
Ambassador 177
Amstrad 171, 177
Anam 180
165, 179
151
Anam
National 055
AOC 030, 019, 185, 137,
Archer 003
Audiovox 180, 003
Belcor 019, 030
Bell &
Howell 016, 154, 179, 180
Blue Star 282
BPL 282
Bradford 180
003, 180, 056
Brockwood 019
Broksonic 236, 463, 003,
Candle 030, 056, 186,
Carver 054, 187
Celebrity 000
Citizen 092, 060, 030,
Clairtone 185
Concerto 056
Contec 180, 185
Craig 180
Crown 180, 039
Curtis Mathes
CXC 180
Daewoo 451, 092, 019,
Daytron 019, 056, 092
Dumont 017, 019
Electroband 000, 185
Electrohome 150, 056, 000,
Emerson 463, 236, 180,
Envision 030
Finlux 179
Fisher 154, 159
Fujitsu 179
Funai 171, 179, 180
Futuretech 180
GE 047, 451, 051,
Gibralter 019, 030, 017
Goldstar 060, 056, 030,
Goodmans 179
Granada 145, 151, 178
Grandin 282, 180
Grunpy 179, 180
Hallmark 178, 179, 236,
Harvard 180, 236, 178,
HCM 282
Hinari 179
Hisawa 282
Hitachi 151, 145, 056
Hypson 282
Ima 180
Infinity 054
Janeil 046
JBL 054, 046
JCB 000
JVC 053
Kaisui 282
KEC 180, 060
Kenwood 030, 019
Kloss 046, 024, 030
KTV 180, 030, 280,
Logik 016, 180, 236
Luxman 056
LXI 047, 054, 154,
Magnavox 054, 096, 030,
Majestic 016, 017
Marantz 054, 030, 096,
Matsui 177, 039
Megatron 178, 145, 003,
MEI 185
Memorex 150, 154, 056,
MGA 150, 030, 019,
Midland 047, 051, 017,
Minutz 021, 027
Mitsubishi 150, 019, 178,
Motorola 093, 055, 054,
MTC 060, 056, 030,
Multitech 180, 179
NAD 156, 166, 178,
NEC 030, 056, 019
Nesco 179
Nikko 092, 030, 178
NTC 092
Onwa 180
Optimus 166, 154, 150,
Optonica 093, 165
Orion 236, 463, 180,
Panasonic 250, 051, 055,
180
046
056, 280, 186,
046, 039
047, 060, 054,
154, 030, 039
039
154, 185, 039
177, 179, 280,
178, 282, 154,
019, 039, 185
021, 027, 282,
178, 135, 174
019, 178
019
179
185, 039
178, 156
186, 187, 024,
171,179
187
151
016, 178
178
135, 039
093
150, 051
019, 185
019
165
179
Penney 047, 051, 060,
Philco 054, 096, 030,
Philips 054, 096, 030,
Pilot 030, 019, 039,
Pioneer 166
Portland 092, 019, 039
Priceclub 060
Prism 051, 055
Proscan 047
Proton 466, 178, 003
Pulsar 017, 092, 019
Pulser 019, 017, 092
Quasar 250, 051, 055
RadioShack 180, 165, 039,
RCA 047, 018, 135,
Realistic 154, 165, 056,
Rhapsody 185
Runco 060, 494, 030,
Saisho 177
Sampo 030, 039
Samsung 060, 427, 056,
Samsux 039
Sanyo 154, 159, 146
Scimitsu 019
Scotch 178
Scott 236, 019, 178,
Sears 047, 054, 154,
SEI 177
Sharp 093, 491, 165,
Shogun 019
Signature
2000 016, 047, 054,
Simpson 186, 187, 030
Sinudyne 177
Sony 000, 080
Soundesign 178, 180, 179,
Spectricon 003, 137, 180,
Squareview 171
SSS 019, 180, 236
Starlite 180, 236, 019
Supra 039
Supre-Macy 046, 039, 186
Supreme 000
Sylvania 054, 096, 030,
Symphonic 171, 179, 180
Tandy 093, 165, 039,
Tatung 055, 003, 051
Technics 250, 051, 055
Technol Ace 179
Techwood 051, 056, 003,
Teknika 092, 054, 060,
Tera 178
TMK 156, 177, 178,
Tomashi 282
Toshiba 156, 154, 060
Tosonic 185
Totevision 039
Triumph 177
Universal 027, 021, 047
Vector
Research 030
Victor 053
Vidikron 054
Vidtech 019, 178
Viking 046
Wards 054, 016, 096,
Yamaha 030, 019
Zenith 017, 092, 016
Zonda 003
Programming the
For All ® Easy 4
054
019, 018, 030,
156, 021, 027,
178, 003, 135,
039, 250
019, 187
019, 187
060, 178, 051
056, 047, 030
090, 019,
174, 093
030, 019, 178,
180, 039
017
030, 019, 178
180, 179
171, 056, 156,
178, 179, 146,
451
039
019
186
030, 019, 056
187, 186
054, 047
055, 250
056, 019, 016,
180, 179, 186,
039
236
030, 174,
056, 165, 019,
021, 027,
020, 178, 179,
080
One
to
operate your VCR or Laser Disc Player:
Locate the brand name of your VCR/Laser Disc
Player and then write it in the space below.
VCR/LD Brand: ________________________________
Locate the brand name of your VCR or Laser Disc
Player in the “SETUP CODES FOR VCRs” or “SETUP
CODES FOR LD PLAYERS” section. The brands are
listed in alphabetical order with the most popular
codes listed first. You will use one of these codes
to program your One For All Easy 4 to operate your
VCR or Laser Disc Player .
To program the One For All Easy 4 to operate your
VCR or Laser Disc Player:
1 Turn on your VCR and insert a tape. If
you are setting up a Laser Disc Player,
turn on the Laser Disc Player and insert
a disc.
2 Press VCR/LD and release. Press and
hold SETUP until the
red light blinks twice, then release SETUP.
VCR/LD
One For All ® Easy 4’s
3 Enter the first three-digit VCR or Laser
Disc Player code listed for your brand in
SETUP
the “Set-Up Codes for VCRs” or “Set-Up
Codes for LD Players”section. If you
perform this procedure correctly, the
red light will blink twice when you enter
the final digit of your code.
4 Aim the
One For All ® Easy 4
at your VCR
or Laser Disc Player and press POWER.
Your component should turn off. If your
original VCR or Laser Disc Player remote
POWER
control did not have a POWER key, press
PLAY. Your component should start to
play. If your VCR or Laser Disc Player
does not respond, r epeat Steps 2-4,
trying each code listed for your brand
until you find the one that operates your
VCR or Laser Disc Player.
5 Your
One For All ® Easy 4
is now
programmed to operate your VCR or
Laser Disc Player. Write your VCR or
Laser Disc Player code in the boxes to
the left for future reference.
Remember, if you want to use your
Easy 4
to operate your VCR or Laser Disc Player,
One For All
®
press the VCR/LD key first.
Set-Up Codes for VCRs
Carver 081
Admiral 048
Action 317
Adventura 000
Aiko 278
Aiwa 000, 307, 406,
Akai 041, 061, 315
Akiba 072
Alba 020, 278
American
High 035, 081
Amstrad 000, 325
Anitech 072
ASA 037, 081
Asha 240
Asuka 037
Audiovox 037, 038
Baird 000, 041, 104
Basic Line 072, 020, 278
Beaumark 240
Bell &
Howell 104, 048, 046
Blaupunkt 162, 034
Brandt Elec tronique 041
Broksonic 184, 121, 211,
Bush 072, 278
Calix 037
Candle 037, 038
Canon 035
Capehart 020
468
295, 361
CCE 278, 072
CGE 000
Cimline 072
Citizen 037, 278, 240,
Clatronics 020
Colt 072
Condor 020
Craig 240, 072, 037,
Crown 072, 020, 278
Curtis
Mathes 035, 060, 202,
Cybernex 240
Daewoo 278, 020, 045,
Dansai 072
Daytron 020, 278
De Graaf 042
Decca 081, 000
Dual 041
Dumont 038, 240, 045
Dynatech 000
Electro-
home 037, 240, 043
Electro-
phonic 037
Emerex 032
Emerson 278, 184, 479,
035, 000
047, 271
041
046
000, 002, 121,
211, 037, 043,
061, 208, 295,
Ferguson 041
Fidelity 000
Finlandia 081, 110, 104
Finlux 000, 042, 104,
Firstline 072, 043, 045,
Fisher 104, 046, 047,
Frontech 020
Fuji 033, 035, 032,
Funai 000, 278, 072,
GAB 072
Garrard 000, 325
GE 060, 202, 035,
GEC 081
Go Video 232, 350, 240
Goldstar 037, 038, 278
Goodmans 278, 000, 020,
Gradiente 000
Granada 048, 035
Grandin 072, 000, 037
Grundig 081
Harley
Davidson 000
Harman/
Kardon 038
Harvard 072
Harwood 072
Head quarter 046
HI-Q 047
Hinari 072, 240
Hitachi 042, 000, 041
Imperial 000
Interfunk 081
ITT 041, 104, 046,
Jensen 041, 067
JVC 067, 008, 041
Kaisui 072
KEC 037, 278
Kenwood 067, 008, 041,
KLH 072
Kodak 035, 037
Lloyd’s 000, 208, 072,
Logik 072
Luxor 043, 104, 046,
LXI 037, 000
Magnavox 035, 081, 039,
Magnin 240
Marantz 035, 081, 110
Marta 037
Matsushita 035, 081
Matsui 208, 295
MEI 035
Memorex 000, 035, 048,
Metz 162, 454
MGA 043, 061
MGN
Technology 240
Minolta 042
Mitsubishi 043, 061, 067,
Motorola 035, 048
MTC 000, 240
Multitech 000, 072
NEC 038, 041, 067,
Nikko 037
Noblex 240
Nokia 104, 240, 046,
Olympus 035
Optimus 048, 037, 104
Optonica 062
Orion 184, 278, 479,
Panasonic 162, 035, 454
Penney 035, 037, 240,
Pentax 042
Philco 035, 081
Philips 081, 035, 062,
Pilot 037
Pioneer 067, 162
Portland 020
Profitronic 240
Proline 000
Proscan 060, 202
Protec 072
Pulsar 039, 240, 278
361
081
037
066, 054
034
325, 240
072, 037, 062
240
038
038
062
110, 149
104, 037, 039,
240, 047, 046,
307
008, 173
008, 104
041
121, 211, 295,
208
042, 162, 038,
454
110
Quarter 046
Quartz 046
Quasar 162, 035
RadioShack 000, 035, 037,
Radix 037
Randex 037
RCA 060, 202, 042,
Realistic 000, 035, 048,
Ricoh 035, 034
Runco 039
Samsung 240, 045
Sanky 048, 039
Sansui 041, 000, 067,
Sanyo 104, 047, 046,
Scott 184, 043, 045,
Sears 104, 035, 000,
SEI 081
Semp 045
Sharp 048, 062
Shintom 072, 000, 240
Shogun 240
Singer 072, 037, 240
Sony 032, 033, 034,
STS 042
Sylvania 081, 035, 043,
Symphonic 000
Tatung 041, 067, 000
TEAC 000, 041
Technics 162, 035
Teknika 035, 000, 037
Thomas 000
TMK 240
Toshiba 043, 045, 066
Totevision 240, 037
Triumph 208
Unitech 240
Vector 045
Vector Research 038
Video Concepts 045, 061
Videosonic 240, 000, 072
Videotronic 035
Wards 048, 000, 035,
White Westinghouse 278
XR-1000 000, 035, 072
Yamaha 038
Zenith 000, 039
048
035, 149, 048,
240
240, 104, 037,
046, 047, 066,
062
072, 271
240
211, 121
037, 042, 046,
047, 066, 054
000, 035
110, 000
042, 047, 060,
202, 072, 081,
240, 149, 062
Set-Up Codes for
TV/VCR Combos
American
High 035*
Brocksonic 002, 294, 479
Colt 072
Curtis
Mathes 035*
Daewoo 278
Emerson 002, 294, 479
Funai 000
GE 035*, 060*,
Hitachi 035*, 000
HQ 000
Lloyds 000
MGA 240
Magnavox 000, 035*, 081*
Magnin 240
Memorex 037, 162*
Mitsubishi 048*
Orion 002, 294, 479
Panasonic 035*, 162*
Penney’s 035*, 240, 162*
Quasar 035*, 162*
RCA 060*, 035*, 048*
Sansui 000, 479
Sanyo 240
Sears 000, 037
Symphonic 000
Zenith 000
NOTE: If your TV/VCR is
working on one of the
above codes
048*, 240
highlighted with an asterisk (*), you may need to
program a separate TV code in order to control
the volume. Check the list of codes below and
follow the instructions detailed in the
“Programming the One For All Easy 4 to Operate
Your TV” section to program the supplied TV code.
TV/VCRs working on VCR code 035 may require TV
code 051 for volume control.
TV/VCRs working on VCR code 048 may require TV
code 093 for volume control.
TV/VCRs working on VCR code 060 may require TV
code 047 for volume control.
TV/VCRs working on VCR code 081 may require TV
code 054 for volume control.
TV/VCRs working on VCR code 162 may require TV
code 250 for volume control.
®
Programming the One For All
Easy 4 to operate
your Cable Converter or DBS Satellite:
Set-Up Codes for
Laser Discs
Carver 194
Disco Vision 023
Hitachi 023
Magnavox 194
Marantz 194
Mitsubishi 059
NAD 059
Panasonic 204
Philips 194
Locate the brand name of your Cable Converter
or Satellite and then write it in the space below.
Cable or Satellite Brand: _______________________
Locate the brand name of your Cable Converter
or Satellite in the “SETUP CODES FOR CABLE
CONVERTERS” or “SETUP CODES FOR SATELLITES”
section. The brands are listed in alphabetical order
with the most popular codes listed first. You will
use one of these codes to program your One For
All Easy 4 to operate your Cable Converter or
Satellite.
To program the One For All Easy 4 to operate your
Cable Converter or Satellite:
1 Turn on your Cable Box, Satellite or DSS.
2 Press CBL/SAT and release. Press and
hold SETUP until the
red light blinks twice, then release SETUP.
CBL/SAT
3 Enter the first three-digit Cable Box,
Satellite or DSS code you wrote down in
SETUP
the “Looking Up Set-Up Codes for Your
Components” section. If you perform
this procedure correctly, the red light
will blink twice.
4 Aim the
Cable Box, Satellite or DSS and press
POWER. Your Cable Box, Satellite or DSS
should turn off. If your Cable Box,
Satellite or DSS does not respond,
POWER
repeat Steps 2-4, trying each code
listed for your brand until you find the
one that operates your Cable Box,
Satellite or DSS.
5 Your
One For All ® Easy 4
programmed to operate your Cable
Box, Satellite, or DSS. Write your Cable
Box, Satellite, or DSS code in the boxes
to the left for future reference.
NOTE: If your original Cable Box remote control did
not have an “ON” key, press CH+ on the
All ® Easy 4
to turn your Cable Box ON.
Pioneer 059, 023
Quasar 204
Sega 023
Sony 201
Theta Digital 194
One For All ® Easy 4’s
One For All ® Easy 4
is now
at your
One For
Set-Up Codes for Cable Converters
ABC 001, 003, 007, 008, 011, 013, 014, 017
Remember, if you want to use your
Easy 4
to operate your Cable Box, Satellite, or DSS,
One For All
®
press the CBL/SAT key first.
Allegro 153, 315
Antronix 022
Archer 022, 153
Belcor 056
Cable Star 056
Cabletenna 022
Cableview 022
Century 153
Citizen 153, 315
Colour Voice 025
Comtronics 040
Contec 019
Eastern 002
Everquest 015, 040
Focus 400
GC
Electronics 056
Garrard 153
Gemini 015
General
Instruments 011, 476
Goldstar 040, 144
Hamlin 009, 020, 034,
Hitachi 011
Hytex 007
Jasco 153, 315
Jerrold 003, 011, 012,
Movie Time 063, 156
NSC 063, 156
Novaplex 618
Oak 007, 019
Optimus 021
Panasonic 021, 107
Philips 025, 153
Pioneer 144
Popular
Mechanics 400
RCA 021
RadioShack 015, 315
Recoton 400
Regal 020, 259
Regency 002
Rembrandt 011
SL Marx 040
Samsung 040, 144
Scientific
Atlanta 008, 017, 477
Signal 015, 040
Signature 011
Sprucer 021
Starcom 003, 015
259
014, 015, 476
Stargate 015, 040
Starquest 015
Sylvania 001
TV86 063
Tandy 258
Teleview 040
Texscan 001
Tocom 012, 013
Tusa 015
Unika 022, 153
United Artists 007
United Cable 003
Universal 022, 056, 153
Videoway 250
Viewstar 063, 258
Zenith 525
Zentek 400
Set-Up Codes for Satellites
Channel
Master 018
Chaparral 053
Citoh 164
Drake 018, 064
Echostar 775, 269, 280
ExpressVu 775
General
Instruments 547, 038, 050,
HTS 775
Homecable 238
Hughes
Network
Systems 749
IQ 210
Janeil 152
Jerrold 361, 627
Legend 269
Macom 018, 050
Memorex 269
Panasonic 152, 701
Primestar 627, 361
RCA 566
Realistic 052
STS 210
Programming the
For All ® Easy 4
361
One
to
operate your CD
Player:
Locate the brand
name of your CD Player and then write it in the
space below.
CD Player Brand: _____________________________
Locate the brand name of your CD Player in the
“SETUP CODES FOR CD PLAYERS” section. The
brands are listed in alphabetical order with the
most popular codes listed first. You will use one of
these codes to program your One For All Easy 4 to
operate your CD Player.
To program the One For All Easy 4 to operate your
CD Player:
1 Turn on your CD Player and insert a
compact disc.
2 Press AUDIO and release. Press and
hold SETUP until the
4’s
red light blinks twice, then release
One For All ® Easy
SETUP.
AUDIO
3 Enter the first three-digit CD Player
code you wrote down in the “Looking
Up Set-Up Codes for Your Compo-
SETUP
nents” section. If you perform this
procedure correctly, the red light will
blink twice.
4 Aim the
One For All ® Easy 4
at your CD
Player and press PLAY. Your CD Player
should play your disc. If your CD Player
does not respond, r epeat Steps 2-4,
PLAY
trying each code listed for your brand
until you find the one that operates
your CD Player.
5 Your
One For All ® Easy 4
is now
programmed to operate your CD
Player. Write your CD Player code in
the boxes to the left for future
reference.
Remember, if you want to use your
Easy 4
to operate your CD Player, press the AUDIO
One For All
®
key first.
Set-Up Codes for
CD Players
Aiwa 124, 157
California
Audio Lab 029
Carver 57, 179
DKK 000
Denon 003
Emerson 305
Fisher 048, 088, 179
Garrard 393
Genexxa 032, 305
Hitachi 032
JVC 072
Kenwood 028, 037, 048,
Krell 157
LXI 305
Linn 157
MCS 029
Magnavox 157, 305
Marantz 029, 157
Mission 157
NSM 157
Onkyo 101
Optimus 000, 032, 037,
190
048, 145, 179,
305, 468
Panasonic 029
Philips 157
Pioneer 032, 305, 468
Proton 157
QED 157
Quasar 029
RCA 053, 179, 305
Realistic 179
Rotel 157
SAE 157
Sansui 157, 305
Sanyo 179
Scott 305
Sears 305
Sharp 037
Sony 000, 185, 490,
Soundesign 145
TEAC 393
Technics 029, 303
Victor 072
Wards 157
Yamaha 036, 187
604, 605
Reassigning Device Keys
You can use the
second TV or a second VCR or any combination of
four home entertainment components. For
example, you may want your
to control 1 TV, 1 CD Player and 2 VCRs. To
accomplish this, you would reassign the CBL/SAT
key to operate the desired component, in this
case, a second VCR. The chart below shows you
how to reassign a particular device key and then
set up your new component.
TV to VCR/LD SETUP* + 992 + VCR/LD + TV +
TV to CBL/SAT SETUP* + 992 + CBL/SAT + TV +
TV to AUDIO SETUP* + 992 + AUDIO + TV +
VCR/LD to TV SETUP* + 992 + TV + VCR/LD +
VCR/LD to CBL/SAT SETUP* + 992 + CBL/SAT +
VCR/LD to AUDIO SETUP* + 992 + AUDIO + VCR/
CBL/SAT to TV SETUP* + 992 + TV + CBL/SAT +
CBL/SAT to VCR/LD SETUP* + 992 + VCR/LD + CBL/
CBL/SAT to AUDIO SETUP* + 992 + AUDIO + CBL/
AUDIO to TV SETUP* + 992 + TV + AUDIO +
AUDIO to VCR/LD SETUP* + 992 + VCR/LD +
AUDIO to CBL/SAT SETUP* + 992 + CBL/SAT +
*NOTE: Here you must hold SETUP until the
All® Easy 4
One For All ® Easy 4
One For All ® Easy 4
TV + SETUP* + VCR or Laser
Disc code.
TV + SETUP* + Cable or
Satellite code.
TV + SETUP* + CD Player
code.
VCR/LD + SETUP* + TV code.
VCR/LD + VCR/LD + SETUP* +
Cable or Satellite code.
LD + VCR/LD + SETUP* + CD
Player code.
CBL/SAT + SETUP* + TV code.
SAT + CBL/SAT + SETUP* + VCR
or Laser Disc code.
SAT + CBL/SAT + SETUP* + CD
Player code.
AUDIO + SETUP* + TV code.
AUDIO + AUDIO + SETUP* +
VCR or Laser Disc code.
AUDIO + AUDIO + SETUP* +
Cable or Satellite code.
’s red light blinks twice.
to operate a
One For
Using the Favorite Channel Key
Your
One For All ® Easy 4
favorite channel key (FAV CH). You can set up the
FAV CH key with a list of up to 10 of your favorite
channels for either your TV, VCR, Cable Box,
Satellite or DSS. Please note, the FAV CH key can
only be set up for one device ke y (TV, VCR/LD or
CBL/SAT) at a time. You cannot set up a favorite
channel list for another device key until you have
cleared the FAV CH key of your original list.
1 Press the device key (TV, VCR/LD, or CBL/
SAT) for the home entertainment
TV
component that will contain your
favorite channel list.
VCR/LD
CBL/SAT
2 Press and hold SETUP until
Easy 4’s
SETUP
SETUP and press 9-9-6.
9-9-6
9-9-6
3 Enter the channel number of the first
channel you would like to add to your
SETUP
favorite channel list. Then press SETUP.
• If you are entering a single digit
channel number, you must press
0 first.
• If you are entering a channel that
is three digits long, such as 103,
you do not have to press SETUP
after you have entered the
channel number.
• If your original remote control
required you to use an ENTER key to
change channels, press ENTER
instead of SETUP after entering your
channel number. For example, if you
want to add TV channel “4” to your
favorite channel list, you would: Press
TV, then pr ess and hold SETUP until
the
blinks twice, then release SETUP and
press 9-9-6. Press 0-4, f ollo w ed b y
ENTER. Then, add your second
channel, followed by ENTER, and
continue adding your favorite
channels until you have added the
10 channels you desire in your
favorite channel list.
4 Continue adding your favorite
channels, up to 10 channels. Once you
SETUP
have finished, press and hold SETUP until
the
One For All ® Easy 4’s
twice.
5 To scan through your favorite channel
list, press FAV CH. Your
FAV CH
4
will automatically scan through your
favorite channel list, stopping at each
channel for three seconds.
6 To stop at one of your favorite channels,
press any key on the
4
.
To clear an entire favorite channel list from the
FAV CH key:
1 Press and hold SETUP until the
All ® Easy 4’s
SETUP
release SETUP.
2 Press 9-9-6, then press and hold SETUP
9-9-6
9-9-6
until the
blinks twice.
is equipped with a
One For All
red light blinks twice. Release
One For All ® Easy 4’s
red light
red light blinks
One For All ® Easy
One For All ® Easy
One For
red light blinks twice, then
One For All ® Easy 4’s
red light
®
Troubleshooting
Problem Solution
Red light not blinking
when you press a key?
The red light blinks
when you press a key
but you receive no
response from your
home entertainment
component ?
The
One For All ® Easy
4
does not operate
your home
entertainment
component or is not
performing
commands properly?
Problems programming a TV/VCR
combo?
VCR not recording?
No volume when in
the Cable mode or
when operating a
second TV or TV/VCR
combination?
Channel +/- and
RECALL not working for
your RCA TV?
Problems changing
channels?
Keypad scrambled?
Replace the batteries with four (4)
new AAA alkaline batteries.
Make sure you are aiming your
One For All ® Easy 4
entertainment component and
that you are within 15 feet of the
component you are trying to
operate before using your
remote.
Try all the codes listed for your
home entertainment component
in the "Set-Up Codes" section.
Many set-up codes may allow for
partial functionality, however, only
one set-up code will operate your
home entertainment component
properly. Make sure that all of the
components you are setting up
are able to be operated with an
infrared remote control.
Use the VCR set-up codes for your
brand. Some combo units may
require both a TV code to control
volume and a VCR code for full
operation.
As a safety feature on the
For All ® Easy 4
REC key twice.
Press and hold SETUP until the
For All ® Easy 4's
twice. Release SETUP and enter
9-9-3 followed by VOL +.
Due to RCA design (1983-1987),
only the original remote control
will operate these functions.
However, using the FAV CH key will
allow you to run through a list of
up to 10 of your favorite channels.
If your original remote control
required a ENTER keystroke when
changing channels, press the
ENTER key on the
Easy 4
after you enter the
channel number.
Press and hold SETUP until the
One For All ® Easy 4's r
blinks twice. Release SETUP and
enter 9-6-9.
at your home
One For All
ed light
One
®
, you must press the
red light blinks
World Wide W eb: http://www.oneforall.com
One For All ® PRODUCTS
Limited Warranty
One For All(“OFA”) warrants, to the original purchaser only, that
this product will be free from defects in materials and w orkmanship,
under normal use, for ninety (90) days from the date of original
purchase.
This warranty does not cover damage or failures caused by
products or services not supplied by OFA, or which result from
accident, misuse, abuse, neglect, mishandling, misapplication,
faulty installation, set-up adjustment, improper maintenance,
alteration, maladjustment of consumer controls, modifications,
commercial use, or that is attributable to acts of God.
There are no express warranties except as listed above. OFA SHALL
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF
ANY BREACH OF WARRANTY. ALL EXPRESS AND IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE
WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow
the exclusion or limitation of incidental or consequential damages,
or limitations on how long an implied warranty lasts, so the above
exclusions or limitations may not apply to you. This warranty gives
you specific legal rights and you may also have other rights which
vary from state to state.
To obtain warranty service for a defective product during the
warranty period, please return the product, pref erably in the original
carton, along with your purchase receipt, to the store of original
purchase. A note detailing the complaint would be helpful. The
store, at its option, will replace or repair this product if found to be
defective.
One
®
One For All
Copyright 1996 by Universal Electronics Inc. No part of this
publication may be reproduced, transmitted, transcribed,
stored in any retrieval system, or translated to any language, in
any form or by any means, electronic, mechanical, magnetic,
optical, manual, or otherwise, without the prior written
permission of Universal Electronics Inc.
This One For All® product is designed for compatibility in North
America excluding Mexico.
URC-4063 - One For All® Big Easy Select Easy 4.
M4022
is a trademark of Universal Electronics Inc.
One For All
(330)-405-8584
5/98
SETUP
Loading...