Omron X-10GS-B, X-10GD, X-10GD-B, X-10GQ, X-10GQ-B Datasheet
...
General-purpose Basic Switch X F-149
Limit
Switches
General-purpose Basic Switch
X
Direct Current Switch with Built-in Magnetic
Blowout
• Incorporates a small permanent magnet in the contact mechanism to deflect the arc to effectively extinguish it.
• Same shape and mounting procedures as the Z Basic Switches.
Model Number Structure
■ Model Number Legend
1. Ratings
10: 10 A (125 VDC)
2. Contact Gap
G: 0.9 mm
3. Actuator
None: Pin plunger
D: Short spring plunger
S: Slim spring plunger
Q: Panel mount plunger
Q21: Panel mount cross roller plunger
Q22: Panel mount roller plunger
L: Leaf spring
W: Hinge lever
W2: Hinge roller lever
W21: Short hinge lever
W22: Short hinge roller lever
W4: Low-force hinge lever
M: Reverse hinge lever
M2: Reverse hinge roller lever
M22: Reverse short hinge roller lever
4. Terminals
None: Solder terminal
B: Screw terminal (with toothed washer)
1 2 3 4
X-10G@-@
F-150 General-purpose Basic Switch X
Ordering Information
■ List of Models
Note: The plungers of reverse-type models are continuously pressed by the compression coil springs and the plungers are freed by operating the
levers.
Specifications
■ Approved Standards
■ Approved Standard Ratings
UL508 (File No. E41515)
CSA C22.2 No.55 (File No. LR21642)
Actuator Solder Screw
X-10G X-10G-B
X-10GS X-10GS-B
X-10GD X-10GD-B
X-10GQ X-10GQ-B
X-10GQ22 X-10GQ22-B
X-10GQ21 X-10GQ21-B
X-10GL X-10GL-B
X-10GW21 X-10GW21-B
Pin plunger
Slim spring
plunger
Short spring
plunger
Panel mount
plunger
Panel mount
roller plunger
Panel mount cross
roller plunger
Leaf spring
Short hinge lever
Actuator Solder Screw
X-10GW X-10GW-B
X-10GW4 X-10GW4-B
X-10GW22 X-10GW22-B
X-10GW2 X-10GW2-B
X-10GM X-10GM-B
X-10GM22 X-10GM22-B
X-10GM2 X-10GM2-B
Hinge lever
Low-force hinge
lever
Short hinge roller
lever
Hinge roller lever
Reverse hinge
lever
Reverse short
hinge roller lever
Reverse hinge
roller lever
Agency Standard File No.
UL UL508 E41515
CSA CSA C22.2 No. 55 LR21642
Rated voltage X-10G
125 VDC 10 A
250 VDC 3 A
General-purpose Basic Switch X F-151
Limit
Switches
■ Ratings
Note: 1. The above values are for the steady-state current.
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The above electrical ratings also apply to the AC voltage.
6. With the reverse-type models (X-10GM@), the normally closed circuits and normally open circuits are reversed.
7. The ratings values apply under the following test conditions:
Ambient temperature: 20±2°C
Ambient humidity: 65±5%
Operating frequency: 20 operations/min
■ Characteristics
Note: 1. The values are for the pin plunger models. (Contact your OMRON representative for other models.)
2. Malfunction: 1 ms max.
■ Contact Specification ■ Contact Form (SPDT)
Note: With the reverse-type models (X-10GM@), the NC and NO ter-
minal arrangements are reversed.
Rated voltage Non-inductive load Inductive load
Resistive load Lamp load Inductive load Motor load
NC NO NC NO NC NO
8 VDC
14 VDC
30 VDC
125 VDC
250 VDC
10 A
10 A
10 A
10 A
3 A
3 A
3 A
3 A
3 A
1.5 A
1.5 A
1.5 A
1.5 A
1.5 A
0.75 A
10 A
10 A
10 A
7.5 A
2 A
10 A
10 A
10 A
6 A
1.5 A
5 A
5 A
5 A
5 A
2 A
2.5 A
2.5 A
2.5 A
2.5 A
1.5 A
Operating speed 0.1 mm to 1 m/s (see note 1)
Operating frequency Mechanical: 240 operations/min
Electrical: 20 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 15 mΩ max. (initial value)
Dielectric strength 1,500 VAC, 50/60 Hz for 1 min between terminals of the same polarity, between current-carrying metal parts and
the ground, and between each terminal and non-current-carrying metal parts
Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude (see note 2)
Shock resistance
Destruction: 1,000 m/s
2
{approx. 100G} max.
Malfunction: 300 m/s
2
{approx. 30G} max. (see note 1, 2)
Durability Mechanical: 1,000,000 operations min.
Electrical: 100,000 operations min.
Degree of protection IP00
Degree of protection against
electric shock
Class I
Proof tracking index (PTI) 175
Switch category D (IEC335-1)
Ambient temperature Operating: −25°C to 80°C (with no icing)
Ambient humidity Operating: 35% to 85% max.
Weight Approx. 27 to 63 g
Item X-10
Contacts Material Silver alloy
Gap (standard value) 0.9 mm
Inrush current NC 30 A max.
NO 15 A max.
COM NC NC
Loading...