Compact and simple, extremely high
cost performance
• The lineup includes compact and horizontal models from
3.8-inch to 4.6-inch and QVGA models.
• True type fonts for flexible screen designs.
• Space-saving installation.
• Multi-language support and safety standard compliance.
System Configuration
NV3W-V1
NV4W/NV3Q
Tool Port
Windows is either registered trademarks or trademarks of Microsoft Corporation in the United Status and/or other countries.
Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.
The product photographs and figures that are used in this catalog may vary somewhat from the actual products.
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Commercially available USB cable
NV4W : Mini B
NV3Q : TYPE-B
SD memory card
(32 MB to 2 GB)
PLC
Personal computer
1
NV-series
Ordering Information
Programmable Terminals
Product name
NV3W-V1
NV4W
NV3Q
Programming Devices
Screen sizeNumber of dotCommunicationsPower supply voltageBacklight
3.8-in, TFT
monochrome
3.8-in, TFT
monochrome
4.6-in, TFT
monochrome
4.6-in, TFT
monochrome
3.6-in, TFT
monochrome
3.6-in, TFT
color
240 96 dots
240 96 dots
320 120 dots
320 120 dots
320 240 dots
(QVGA)
320 240 dots
(QVGA)
Specifications
RS-232C5 VDC
RS-232C24 VDCNV3W-MG20-V1
RS-422A/48524 VDCNV3W-MG40-V1
RS-232C5 VDC
RS-232C24 VDCNV3W-MR20-V1
RS-422A/48524 VDCNV3W-MR40-V1
RS-232C24 VDC
RS-422A/48524 VDCNV4W-MG41
RS-232C24 VDC
RS-422A/48524 VDCNV4W-MR41
RS-232C24 VDC
RS-422A/48524 VDCNV3Q-MR41
RS-232C24 VDC
RS-422A/48524 VDCNV3Q-SW41
LEDs, 3 colors
(green, orange, and
red)
LEDs, 3 colors
(white, pink, and
red)
LEDs, 3 colors
(green, orange, and
red)
LEDs, 3 colors
(white, pink, and
red)
LEDs, 3 colors
(white, pink, and
red)
White LED
Model
NV3W-MG20L-V1
NV3W-MR20L-V1
NV4W-MG21
NV4W-MR21
NV3Q-MR21
NV3Q-SW21
Product nameSpecificationsModel
FA Integrated
Tool Package
CX-One Lite
Ver.4.
FA Integrated
Tool Package
CX-One
Ver. 4.
CX-One Lite is a subset of the complete CX-One package that provides
only the Support Software required for micro PLC applications. *1
CX-One Lite runs on the following OS.
Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) /
Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit version)
CX-One Lite Ver. 4.
CX-One is a comprehensive software package that integrates the Support
Software for OMRON PLCs and components. *2
CX-One runs on the following OS.
Windows 7 (32-bit/64-bit version) / Windows 8 (32-bit/64-bit version) /
Windows 8.1 (32-bit/64-bit version) / Windows 10 (32-bit/64-bit version)
CX-One Ver. 4.
includes NV-Designer Ver.1..
includes NV-Designer Ver.1..
Number of
licenses
1 licenseDVDCXONE-LT01D-V4
1 license *3DVDCXONE-AL01D-V4
Media
Note: 1. NV-Designer version 2.0 or higher is required to use the NV3W-V1.
NV-Designer version 1.0 or higher is required to use the NV3Q.
NV-Designer version 1.1 or higher is required to use the NV4W.
2. The CX-One and CX-One Lite cannot be simultaneously installed on the same computer.
*1. CX-One Lite Ver.4. provides the following Support Software : Micro PLC Edition CX-Programmer Ver.9., CX-Integrator Ver.2.,
*2. For details, refer to the CX-One Catalog (Cat. No : R134).
*3. Multi licenses (3, 10, 30, or 50 licenses) and DVD media without licenses are also available for the CX-One.
2
NV-series
Options (Sold separately)
Product nameSpecificationsModel
For the NV3W with 5-V power
PT-to-PLC
Connecting Cable
Programming
Device
Connecting
Cable
Battery *2For the NV4W and NV3QNV-BAT01
Display Protective Sheets
AttachmentNP3 Series to NV3Q SeriesNV3Q-ATT02
USB-Serial
Conversion
Cable
(NV3W-MG20L-V1/MR20L-V1 only)
For the NV3W-V1, NV4W, and NV3QLength: 2mXW2Z-200T-3
For the NV3W-V1, NV4W, and NV3QLength: 5mXW2Z-500T-3
For the NV3WLength: 3mNV-TOL-3M
For the NV3W
Use this Cable together with the NV-TOL-3M
to connect to a USB connector on the computer.
Note : The enclosed USB driver must be installed.
For the NV3W-V1, contains 10 sheetsNV3W-KBA04-V1
For the NV4W, contains 10 sheetsNV4W-KBA04
For the NV3Q, contains 10 sheetsNV3Q-KBA04
Note: For NV3W-V1 and NV4W, use commercially available USB cable (Mini B).
For NV3Q, use commercially available USB cable (TYPE-B).
*1. If the XW2Z-200T-4 Cable is used with the NV3W-V1, 5 V can be supplied from the CS/CJ/CP-series PLCs instead of from an external power
supply. Refer to the NV-series PT Setup Manual (Cat.No V103) for details.
*2. Cannot be used for the NV3W-V1.
Length: 2mXW2Z-200T-4*1
Length: 0.5mCS1W-CIF31
3
NV-series
Specifications
General Specifications
ItemSpecifications
Model
Rated power supply24 VDC5 VDC24 VDC
Operating voltage range
Current consumption
Ambient operating
temperature
Ambient operating
humidity
Ambient storage
temperature
Ambient storage
humidity
Dielectric strengthBetween the power supply terminals and the case 500 VAC for 1 min with a cutoff current of 10 mA (at initial state)
Insulation resistance Between the power supply terminals and the case 100 M (at 500 VDC) (at initial state)
Vibration resistance
Shock resistance147m/s2 3 times each in X, Y, and Z directions98m/s2 4 times each in X, Y, and Z directions
Noise immunity1,000 Vp-p with pulse widths of 50 ns and 1 s between power supply terminals (via simulator)
Resistance to
environment
Battery life
expectancy
Safety standardsUL 508, EC Directives and KCUL 508 and EC Directives
Weight170 g max.240 g max.
* The SRAM (internal RAM) is backed up by the battery. If backing up the data is required, purchase the NV-BAT01 Battery separately.
NV3W-M20-V1/M40-V1
21.6 to 26.4 VDC4.5 to 5.5 VDC21.6 to 26.4 VDC
1.9 W max. (80 mA max.)1 W max. (200 mA max.) 1.7 W max. (70 mA max.) 2.4 W max. (100 mA max.) 3.6 W max. (150 mA max.)
0 to 50 C
20% to 85% (with no condensation)
-20 to 60 C
10% to 85% (with no condensation)
5 to 8.4 Hz, 3.5-mm single
amplitude, 8.4 to 150 Hz,
9.8 m/s2, 10 times each in
X, Y, and Z directions
(1 octave/min)
For NV3Q IP65 (at initial state), For NV3W-V1, NV4W IP67 (at initial state)
Dust proof and drip proof only from the front of the panel (using Waterproof Packing at the contact surface with the panel)
Replace the Waterproof Packing each time you reinstall the PT.
NV3W-M20L-V1NV4W-M21/M41NV3Q-MR1NV3Q-SW1
5 to 9 Hz, 3.5-mm single
amplitude, 9 to 150 Hz,
2
, 10 times each in
9.8 m/s
X, Y, and Z directions
(1 octave/min)
---Battery life expectancy: 5 yr (at 25 C) *
10 to 55 Hz with 0.75-amplitude for 10 min each in X,
Y, and Z directions, 1 sweep per min
NV-Designer version 1.1 or higher
(Included with CX-One version 4.03 or in
CX-One Lite version 4.03.)
(green, orange, and red)
(white, pink, and red)
21:
41:
*1. This is the estimated time before brightness is reduced by half at room temperature and humidity. It is not a guaranteed value.
*2. The estimate applies to operation when only custom switches are placed on the screen.
*3. This value does not include 1-dot box of frame line.
*4. The capacity of the SD memory card is 32 MB to 1 GB for PT system program version 1.0.
*5. SD memory cards are shipped pre-formatted from the factory, so there is normally no need to format them. If an SD memory card is formatted
with the standard formatting utility provided with a personal computer, its file system will not conform to the SD memory card standard. Always
use the formatting software provided by SD memory card makers.
*6. The display device of NV3Q-MR1 of the Lot No. 160430 or earlier is STN, and the Lot No. 160501 or later is TFT.
*7. The display device of NV3Q-SW1 of the Lot No. 110999 or earlier is STN, and the Lot No. 111000 or later is TFT.
*8. The display device of NV3W-MG(L)-V1/MR(L)-V1 of the Lot No. 161231 or earlier is STN, and the Lot No. 170101 or later is TFT.
*9. The display device of NV4W-M21/M41 of the Lot No. 170221 or earlier is STN, and the Lot No. 170222 or later is TFT.
NV3Q-MR: TFT monochrome LCD *6
NV3Q-SW: TFT color LCD *7
NV3Q-MR: LED backlights, 3 colors
NV3Q-SW: LED backlight, 1 color (white)
NV3Q-
RS-232C (not isolated), Transmission
distance: 15 m, Connector: 8-pin
NV3Q-
RS-422A/485 (not isolated),
Transmission distance: 500 m,
Connector: 8-pin
USB 1.1 TYPE-B, Transmission distance:
5 m max.
NV-Designer version 1.0 or higher
(Included with CX-One version 3.2 or in
CX-One Lite version 4.0.)
(white, pink, and red)
21 :
41 :
4
NV-series
Panel Cutout Dimentions
Applicable panel thickness :
1.6 mm to 4.8 mm
105.0
67.0
+1
0
+1
0
74
112
4
0.6
10.55
65
3.5
23
103
60.5
37.5
85
Panel Cutout Dimentions
Applicable panel thickness :
1.6 mm to 4.8 mm
99.2
85.2
+1
0
+1
0
4.0 29.8
65.0
With connector
mounted
3.9
5.2
7.6
(1.0 for Packing)
70.6
(displa
y screen)
110.0
107.4
92.2
84.2
52.9
(display screen)
Applicable PLCs
CompanySeriesCompanySeries
OMRONCP SeriesMitsubishi ElectricFX Series
OMRONCJ SeriesMitsubishi ElectricQ Series
OMRONCS SeriesMitsubishi ElectricA Series
OMRONC SeriesPanasonic Electric WorksFP Series
OMRONCVM1/CV SeriesToshiba MachineTC mini Series
OMRONTemperature Controllers EJ1 SeriesKeyenceKV Series, KV Nano Series
Yokogawa ElectricFA-M3 SeriesAllen-Bradley Models that support DF protocol MicroLogix
HitachiEH-150EHV SeriesAllen-Bradley Models that support DF protocol SLC-500 Series
HitachiEH150 SeriesSiemensS7-200 Series
HitachiMICRO-EH SeriesLGMASTER-K Series
HitachiWeb ControllerModbusModels that support RTU protocol
Note: Refer to "NV Series Programmable Terminals Host Connection Manual (Cat.No V105)" which is included in NV-Designer for information on
combination use with each PLC Series.
Dimensions(Unit: mm)
NV3W-V1NV4W
NV3Q
146
109.8 (display screen)
Panel Cutout Dimentions
+1
139
0
+1
67
Applicable panel thickness :
0
1.6 mm to 4.8 mm
41.8
(display
screen)
4
26
74
66
40.6
1313
86
70
Related Manuals
Cat. NoModelName
V103NV3W-V1, NV4W, NV3QNV Series Programmable Terminals Setup Manual
V104NV3W-V1, NV4W, NV3Q, NV-DesignerNV Series Programmable Terminals Programmig Manual
V105NV3W-V1, NV4W, NV3QNV Series Programmable Terminals Host Connection Manual
5
Printed on recycled paper.
OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • automation.omron.com
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • automation.omron.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
Ciudad de México • 52.55.5901.4300
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
San Pedro Garza García, N.L. • 81.12.53.7392 • 01.800.386.6766 • mela@omron.
com