Omron NSA12-TX11B, NSA15-TX11B, NSA12-TX11S, NSA15-TX11S, NSA12-TX12B User Manual
...
Cat. No. V238-E1-02
Cat. No. Z264-E1-06A Smart Sensor ZFX-C USER´S MANUAL
NSA-Series
NSA-Series Industrial PC
USER´S MANUAL
NSA-Series Industrial PC
NSA12/15-TX11B
NSA12/15-TX11S
NSA12/15-TX12B
NSA12/15-TX12S
User's Manual
iv
v
Introduction
The NSA-series Industrial PC is an industrial, panel-mountable computer equipped
with a Celeron M Processor and featuring a touch panel and display.
Be sure to read and understand the functions and performance specifications in
this manual prior to using it, and operate it as described herein.
Intended Audience
This manual is intended for the following personnel, who must also have
knowledge of electrical systems (an electrical engineer or the equivalent).
· Personnel in charge of introducing FA systems into production facilities
· Personnel in charge of designing FA systems
· Personnel in charge of managing FA systems and facilities
Notice
This manual provides information for connecting and setting up an NSA-series
Industrial PC. Be sure to read this manual before attempting to use it, and keep the
manual close at hand for reference during operation.
OMRON, 2008
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or
by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission o
f
OMRON.
No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is con-
stantly striving to improve its high-quality products, the information contained in this manual is subject to change without
notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsibility
for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
vi
vii
Read and Understand this Manual
Please read and understand this manual before using the product. Please consult your OMRON
representative if you have any questions or comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials an d workmanship for a
period of one year (or other period if specified) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING
NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE
PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on
which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS
REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS
WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO
CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
viii
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the
combination of products in the customer's application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifyin g
ratings and limitations of use that apply to the products. This information by itself is not sufficient for a
complete determination of the suitability of the products in combination with the end product, machine,
system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not
intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses
listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or
uses not described in this manual.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical
equipment, amusement machines, vehicles, safety equipment, and installations subject to separate
industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the product s.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable produ ct, or any
consequence thereof.
ix
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other
reasons.
It is our practice to change model numbers when published ratings or features are changed, or when
significant construction changes are made. However, some specifications of the products may be changed
without any notice. When in doubt, special model numbers may be assigned to fix or establish ke y
specifications for your application on your request. Please consult with your OMRON representative at any
time to confirm actual specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing p urp oses, even when
tolerances are shown.
PERFORMANCE DATA
Performance data given in this manual is provided as a guide for the user in determining suitability and does
not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and
Limitations of Liability.
ERRORS AND OMISSIONS
The information in this manual has been carefully checked and is believed to be accurate; however, no
responsibility is assumed for clerical, typographical, or proofreading errors, or omissions.
x
Safety Precautions
Safety-related Indications and Their Meanings
The following precautionary indications and symbols are used in this manual to aid
in the safe usage of the NSA-series Industrial PC. These precautions contain
important safety information. Be sure to observe them carefully.
The indications and symbols used herein, and their meanings, are as listed below.
! WARNING
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury. Additionally, there may be
severe property damage.
! Caution
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury, or property damage.
Precautions for Safe Use
Indicates actions that should be done, or avoided, for the safe use of this product.
Precautions for Correct Use
Indicates actions that should be done, or avoided, to prevent operating failure or
malfunction of this product, or to prevent adverse effects on the performance or
functions of this product.
Note
Notes within the text of this manual indicate safety-related points and information
that are equivalent in importance to those included in the Precautions for Safe Use
sections.
!WARNING Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations gi ven.
xi
Symbols
Electrical Shock Caution
Indicates possibility of electric shock under
specific conditions.
General Prohibition
Indicates non-specific general prohibitions.
Disassembly Prohibition
Indicates prohibitions when there is a possibility
of injury, such as from electric shock, as the
result of disassembly.
Mandatory Action
Indicates a mandatory action with the specific
contents indicated in the circle and described in
the text.
General Caution
Indicates non-specific general cautions,
warnings, and dangers.
xii
WARNING
Be sure to observe all warning instructions while using this product.
Do not scratch the power supply connection cable.
Do not scratch or forcefully bend the power supply connection cable. Doing so may
damage the cable and may cause electric shock or fire.
Do not disassemble or modify the product.
Do not disassemble, cut, modify, or burn the product, and do not touch internal
parts while the power is ON. Doing so may cause electric shock or fire.
Do not splash with water.
• Do not use the product in a location where it might be splashed with water, or in
any location near water. Water contacting electrical components may cause
electric shock, ground fault, or short-circuiting, which may result in fire.
• If a beverage or other liquid is spilled onto the product, turn OFF the power
immediately, and remove all connectors from the power supply input terminal
block.
Do not touch the power supply input terminals with wet hands.
Doing so may cause electric shock or other injury.
If smoke or an abnormal odor or sound is generated, turn OFF the power
immediately, and disconnect the power supply input connector.
Using the product in this condition may cause short-circuiting, which may result in
fire or electric shock.
If the product is knocked over or is subject to a strong impact, turn OFF the power
immediately, and disconnect the power supply input connector.
Using the product in this condition may cause short-circuiting, which may result in
fire or electric shock.
Ground the product.
A functional terminal is provided for grounding. If the product is not grounded and a
ground fault occurs, it may result in fire or electric shock.
xiii
Caution
Hold the connector housing when disconnecting the power connection cable.
Hold the connector housing, rather than the cable, when disconnecting the cable.
Pulling the cable may break wires inside, which may result in heating or fire.
Observe all relevant standards and environmental conditions.
Observe all standards for power supply voltage, frequency, capacity, etc. Using the
product under conditions not prescribed by these standards may cause electric shock
or fire.
Do not place objects on top of the product.
Do not place objects on top of the product or press on the product. Doing so may
damage the product and result in injury.
Do not place objects near the ventilation holes.
Do not place objects near the ventilation holes, or block the holes in any way. Doing so
may cause the product to malfunction.
Do not tip the product over or strike it with anything.
Do not subject the product to vibration or impacts, particularly when the power is ON. If
the product is subjected to impacts by being dropped or struck, it may fail to operate
correctly.
Do not use or store the product in the following locations.
Using or storing the product in any of the following locations may cause electric shock,
fire, or malfunction.
• Locations that are unstable or subject to vibration
• Locations subject to static electricity
• Locations subject to dust or high humidity
• Locations subject to direct sunlight
• Locations subject to flames or heat accumulation
• Locations subject to exposure to chemicals
• Locations close to heating or cooling equipment
• Locations subject to water seepage
• Locations subject to ground faults
Do not use the product near a radio, television, or cordless telephone. Doing so may
cause electrical noise to enter the product or the radio, television, or cordless
telephone, preventing correct operation.
Do not allow condensation to form on or in the product.
Installing the product in a location with high humidity, or installing the product indoors
soon after bringing it in from the outdoor cold may cause condensation to form on or in
the product, and using the product in this condition may cause malfunction.
Dispose of the product and batteries correctly.
The product contains lithium batteries. Dispose of the product and batteries according
to local ordinances as they apply. Have qualified specialists properly dispose of used
batteries as industrial waste.
Provide sufficient working space.
Prior to moving the product or replacing components, ensure that there is sufficient
room and no interfering obstacles.
xiv
Turn OFF the power supply before doing any work on the product.
Do not touch the product case or the heat dissipation panel on the rear surface of the
case while the power supply is turned ON because they become very hot.
Also, turn OFF the power and wait for the product to cool down before doing any
maintenance work on the product.
When turning OFF the power supply, either turn OFF the external input power supply
or disconnect the power supply input connector.
The NSA-series Industrial PC must be installed within a control panel.
Use a control panel that meets or exceeds Type 1 enclosure standards.
Maintain appropriate environmental conditions.
Use the NSA-series Industrial PC in an environment with a pollution degree of 2 or
better.
Do not connect the NSA-series Industrial PC directly to a commercial power supply.
Supply power through an isolation transformer with a capacity of 200 VA max.
xv
Precautions for Safe Use
Observe the following precautions when using the NSA-series Industrial PC.
1. When unpacking the product, check carefully for any e xternal scratches or other
damage. Also, shake the product gently and check for any abnormal sound.
2. The mounting panel must be between 1.6 and 4.0 mm thick.
3. Tighten the Mounting Brackets e v enly to a torque of betw een 0.5 and 0.6 N·m to
maintain water and dust resistance. Make sure the panel is not dirty or warped
and that it is strong enough to hold the product.
4. Do not let metal particles enter the product when preparing the panel.
5. Do not connect an AC power supply to the power terminals.
6. Do not perform a dielectric voltage test.
7. Use a DC power supply with reinforced insulation and minimal voltage
fluctuation.
Rated power supply voltage: 24 VDC (Allowable range: 20.4 to 27.6 VDC),
Capacity: 80 W min.
8. Connect to the power supply terminal block using a twisted-pair cable with
stranded copper wire between AWG16 and AWG12 with a rated temperature of
75°C. Tighten the terminal screws to a torque of 0.5 to 0.6 N·m (5 to 7 lb·in). Be
sure the screws are properly tightened.
9. Turn OFF the power supply before connecting or disconnecting cables.
10. Always tighten the connector screws after connecting communications cables.
11. The maximum tensile load for cables is 30 N. Do not apply loads greater than
this.
12. Confirm the safety of the system before turning ON or OFF the power supply.
13. Always reset the power supply after changing switch settings.
14. Do not remove the Memory Card while the power to the NSA-series Industrial
PC is turned ON.
15. Do not perform the following operations while the Memory Card is being
accessed:
· Turning OFF the power supply to the NSA-series Industrial PC.
· Removing the Memory Card
Always follow the specified procedure when removing the Memory Card.
16. Do not press the touch switch with a force greater than 30 N.
17. Do not accidentally press touch switch when the backlight is not lit or when the
display does not appear . Confirm the safety of the system before pressing touch
panels.
18. Do not attempt to disassemble, repair, or modify the product in any way.
19. Dispose of any battery that has been dropped on the floor or otherwise
subjected to excessive shock, as this may cause the battery fluid to leak.
xvi
20.Dispose of the product and batteries according to local ordinances as they apply .
Have qualified specialists properly dispose of used batteries as industrial waste.
21.Do not connect a USB connector to any device that is not applicable.
22. Before connecting a USB connector to a device, make sure that the device is
free of damage.
23. When mounting the Battery, be sure to use the correct Battery and mount it
correctly.
24. The backlight in the NSA-series Industrial PC contains mercury. Do not dispose
of the NSA-series Industrial PC together with other waste to be sent to a
disposal site. Dispose of the NSA-series Industrial PC according to local
ordinances as they apply.
25. Use a PCI Board that complies with the EMC Directive. If a PCI Board that does
not comply with the EMC Directive is used, there are certain measures that the
user must take.
26. Use only the Memory Cards specified by OMRON.
27. Thoroughly test any application programs created by users or third-party
vendors to confirm that they operate properly before actually using them with
the product.
28. OMRON cannot assume any responsibility for programs created by any party
other than OMRON, nor for the results of using such programs.
xvii
Precautions for Correct Use
Install the NSA-series Industrial PC correctly, as described in this manual.
z Do not install the Unit in the following places:
· Locations subject to severe temperature changes
· Locations subject to temperatures or humidity outside the range given in the
specifications
· Locations subject to condensation as the result of high humidity.
· Locations subject to splashing chemicals
· Locations subject to splashing oil
· Locations subject to corrosive or flammable gas
· Locations subject to severe vibration or shock
· Locations directly subject to wind or rain outdoors
· Locations subject to strong ultraviolet light
z Take sufficient shielding measures when installing systems in the following
locations:
· Locations subject to severe static electricity or noise from other devices
· Locations subject to strong electro fields or magnetic fields
· Locations close to power supply lines
· Locations subject to possible exposure to radioactivity
Warnings and Precautions
z LCD Panel Precautions
· There may be inconsistencies in the brightness of the LCD panel depending
on what is displayed and the contrast setting. This is not a malfunction.
· There may be small spots on the display. This is not a malfunction.
· The display color may appear to change if the display is viewed outside the
viewing angle. This is a basic characteristic of LCDs.
· If the same image is left on the screen for an extended period of time, that
image will be burned into the screen permanently. Use the burn-in prevention
function or periodically change the screen to prevent permanent damage to
the screen.
z Windows XP Embedded
· Windows XP Embedded is an OS designed for embedded use. Some
application programs that operate on the Windows XP Professional OS may
not operate on the Windows XP Embedded OS of an NSA-series Industrial
PC.
· Windows components cannot be added and deleted by using the menu
command under Add or Remove Programs from the Control Panel.
· The Windows Updates for Windows XP Professional cannot be installed.
· The service packs for Windows XP Professional cannot be installed.
xviii
Revision History
A manual revision code appears as a suffix to the cat alog number on the front
cover of the manual.
Revision Code
V238-E1-02
Cat. No.
Revision code Date Revision content
01 March 2008 Original production
02 May 2008 Page 4-12: Adding information on Shutdown OS and
Reboot OS Buttons at bottom of page.
xix
Checking the Contents of the Package
The NSA-series Industrial PC is shipped together with a number of accessories.
When opening the package, make sure that all of the parts shown below are
included and in good condition. If any of these parts are missing or damaged,
contact the sales representative from whom you purchased the product.
Main Body Mounting Brackets (8)
Instruction Sheet
Note
The OS is not installed in the NSA-series Industrial PC. Use the NSA-series Industrial
PC only with the specified OMRON Memory Cards, which have Windows XP
Embedded preinstalled in them. Refer to Appendix 5 Accessories for information on the
different types of Memory Cards.
xx
xxi
Section 1 Overview and Specifications
Section 2 Nomenclature
Section 3 Installing the NSA-series Industrial PC and
Connecting Peripheral Devices
Section 4 RAS Functions
Section 5 Maintenance
Appendix
1
2
3
4
5
Appendix
xxii
Table of Contents
Introduction...................................................................................................................v
Intended Audience.............................................................................................................v
Notice ...............................................................................................................................v
Safety Precautions.......................................................................................................x
Safety-related Indications and Their Meanings..............................................................x
Precautions for Safe Use...........................................................................................xv
Precautions for Correct Use.................................................................................... xvii
Revision History...................................................................................................... xviii
Checking the Contents of the Package...................................................................xix
Table of Contents..................................................................................................... xxii
Section 1 Overview and Specifications
1-1 Overview..........................................................................................................1-2
1-1-1 Overview............................................................................................................ 1-2
1-1-2 Features............................................................................................................. 1-2
1-2 Specifications...................................................................................................1-4
1-2-1 Ratings and Specifications ................................................................................1-4
1-2-2 General Specifications.......................................................................................1-5
1-2-3 Dimensions and External Appearance.............................................................. 1-8
Section 2 Nomenclature
2-1 Nomenclature ..................................................................................................2-2
2-1-1 Front Panel........................................................................................................ 2-2
2-1-2 Rear Panel......................................................................................................... 2-2
2-1-3 Connectors and Interfaces................................................................................. 2-3
Section 3 Installing the NSA-series Industrial PC and
Connecting Peripheral Devices
3-1 Basic Operating Procedures............................................................................ 3-2
3-2 Mounting the Memory Card............................................................................. 3-4
3-2-1 Mounting a Memory Card.................................................................................. 3-4
3-2-2 Removing a Memory Card................................................................................. 3-5
3-3 Installing a PCI Board and Setting the DIP Switch.......................................... 3-6
3-3-1 Installing a PCI Board........................................................................................ 3-6
3-3-2 Setting the DIP Switch..................................................................................... 3-10
xxiii
3-4 Installing the NSA-series Industrial PC..........................................................3-12
3-4-1 Environment..................................................................................................... 3-12
3-4-2 Installing the NSA-series Industrial PC in a Control Panel.............................. 3-13
3-4-3 Connecting the Power Supply......................................................................... 3-14
3-4-4 Connecting the Grounding Wire...................................................................... 3-15
3-5 Starting the Industrial PC and Procedure after Power Interruption................3-17
3-5-1 Operation......................................................................................................... 3-17
3-5-2 Operating Sequence for the External Power Supply....................................... 3-18
3-6 Adjusting the Touch Panel and Display.........................................................3-19
3-6-1 Calibrating the Touch Panel............................................................................ 3-19
3-6-2 Adjusting the Display....................................................................................... 3-21
Section 4 RAS Functions
4-1 RAS Function Details.......................................................................................4-2
4-1-1 What Is the RAS Solution for OMRON Industrial PCs?.................................... 4-2
4-1-2 Monitoring and Auto-recovery ........................................................................... 4-2
4-1-3 Logging Function and Log Analysis Function.................................................... 4-4
4-1-4 Architecture........................................................................................................ 4-4
4-2 Special RAS Board Functions..........................................................................4-5
4-2-1 Special RAS Board Functions........................................................................... 4-5
4-2-2 Setting Procedure.............................................................................................. 4-5
4-3 Motherboard RAS Functions............................................................................4-7
4-3-1 Standard PC RAS Data..................................................................................... 4-7
4-3-2 Unique RAS Functions ...................................................................................... 4-7
4-3-3 Setting Procedure.............................................................................................. 4-9
4-4 RAS Utility Functions .....................................................................................4-10
4-4-1 RAS Utility Functions....................................................................................... 4-10
4-4-2 Setting the Failure Notification Function.......................................................... 4-10
4-4-3 Checking the PC’s Operating Status using the Status Monitor....................... 4-13
4-4-4 Log Viewer (Filter and Find)............................................................................ 4-14
Section 5 Maintenance
5-1 Maintenance.....................................................................................................5-2
5-1-1 Data Backup...................................................................................................... 5-2
5-1-2 Spare Units........................................................................................................ 5-2
5-1-3 Backlights (LCD Module)................................................................................... 5-2
5-1-4 Batteries............................................................................................................. 5-3
5-2 Cleaning and Inspecting...................................................................................5-5
5-2-1 Cleaning............................................................................................................. 5-5
5-2-2 Inspecting .......................................................................................................... 5-5
5-3 Troubleshooting Guide.....................................................................................5-7
5-3-1 Remedies for Problems..................................................................................... 5-7
xxiv
Appendix 1 BIOS Setup.................................................................................Appendix-2
Appendix 1-1 Using the Setup Menu............................................................... Appendix-2
Appendix 1-2 Screen Configuration.................................................................Appendix-3
Appendix 1-3 BIOS Setup Menu Keys ............................................................Appendix-3
Appendix 1-4 Menu Configuration................................................................... Appendix-4
Appendix 1-5 Main Menu................................................................................. Appendix-5
Appendix 1-6 Advanced Menu ........................................................................ Appendix-8
Appendix 1-7 Intel Menu................................................................................Appendix-15
Appendix 1-8 Security Menu ......................................................................... Appendix-17
Appendix 1-9 Power Menu ............................................................................Appendix-18
Appendix 1-10 Boot Menu............................................................................... Appendix-19
Appendix 1-11 Exit Menu ................................................................................ Appendix-20
Appendix 2 Using the Enhanced Write Filter...............................................Appendix-21
Appendix 2-1 About the EWF Function......................................................... Appendix-21
Appendix 2-2 Confirming the Operating State of the EWF Function............. Appendix-21
Appendix 2-3 Enabling the EWF Function .................................................... Appendix-22
Appendix 2-4 Updating Data on the Memory Card
When the EWF Function Is Enabled.......................................Appendix-22
Appendix 2-5 Disabling the EWF Function....................................................Appendix-23
Appendix 2-6 Precautions ............................................................................. Appendix-23
Appendix 2-7 Reference................................................................................ Appendix-24
Appendix 3 Precautions for Changing Factory Settings for
Windows XP Embedded...........................................................Appendix-25
Appendix 4 Connecting an NE1S-Series CPU Unit.................................... Appendix-26
Appendix 5 Accessories.............................................................................. Appendix-28
Appendix 6
Using Virtual Memory............................................................... Appendix-29
Appendix 6-1 Setting and Deleting the Paging File....................................... Appendix-29
Section 1
Overview and Specifications
1-1 Overview
1-1-1 Overview
1-2
1
Overview and Specifications
1-1 Overview
1-1-1 Overview
The NSA-series Industrial PC is a panel-mountable computer equipped with a
Celeron M Processor and featuring a touch panel (input), display (output), and
RAS (reliability, availability, serviceability) functions.
1-1-2 Features
■ High-speed CPU and Chipset with Integrated Graphic Core
The NSA-series Industrial PC is equipped with a 600 MHz Celeron M Processor
that has a built-in 512-Kbyte L2 cache. It also features a chipset with an integrated
graphic core that produces sharp images and vivid, realistic graphics. The
NSA-series Industrial PC maintains optimal performance through distributed
processing that makes efficient and balanced use of both the graphics and system
memory.
■ High-performance Display
The XGA color LCD featured in the NSA-series Industrial PC is a high-contrast,
high-resolution TFT display.
■ Thin Profile
Even when the display section is included, an NSA-series Industrial PC (NSA12
models) has a thin profile with a thickness of only 98 mm.
■ Waterproof Construction
The front panel is rated the equivalent of IP65 for waterproofing.
■ Network Functions
Connecting to two networks is quick and easy because each NSA-series Industrial
PC comes with two 10Base-T/100Base-TX Ethernet Connector ports as standard
features.
■ Memory Cards
The vibration and shock resistance of the NSA-series Industrial PC is greatly
improved because it features a ROM storage drive (Memory Card) that uses
non-volatile flash memory in place of a conventional hard disk drive.
Note: Memory Cards are sold separately.
■ Built-in Expandability
A PCI Board slot has been installed to facilitate system expansion. Two serial ports
and four USB ports are also provided as standard features.
■ Touch Panel for Pointing Device Use
The NSA-series Industrial PC uses an analog touch panel to allow highly intricate
operations.
■ RAS Functions
In addition to standard PC RAS functions, the NSA-series Industrial PC is provided
with other unique RAS functions as standard equipment for even greater system
reliability.
■ Fanless Design
A fanless air-cooled design was devised for the NSA-series Industrial PC to
eliminate concerns about cooling fan failure.
■ High Reliability
The diskless, fanless design and unique RAS functions ensure high reliability for
1-1 Overview
1-1-2 Features
1-3
1
Overview and Specifications
systems in which the NSA-series Industrial PC is used.
■ USB Port on Front Panel
Two ports for A-type USB connectors are provided as standard equipment on the
front panel. These USB ports can be used even when the NSA-series Industrial PC
is installed in a control panel.
■ Windows XP Embedded
Windows XP Embedded is an OS for embedded use. Purchase the Memory Cards
specified by OMRON, which have Windows XP Embedded already installed. This
OS includes an Enhanced Write Filter for better reliability. Refer to Appendix 2
Using the Enhanced Write Filter for more information.
1-2 Specifications
1-2-1 Ratings and Specifications
1-4
1
Overview and Specifications
1-2 Specifications
1-2-1 Ratings and Specifications
Item Specifications
OS (when Memory Card is mounted) Preinstalled Windows XP Embedded (NSA-CEX@@)
Processor 600 MHz ULV Intel Celeron M Processor
Type Memory Card (flash memory) (See note 8.)
Capacity 2, 4, or 8 Gbytes (See notes 6.)
Storage
device (when
Memory Card
is mounted)
Service life (write cycles)
100,000 cycles per 1 block of NAND flash memory
Main memory 256 MB or 512 MB DDR-SDRAM (No-ECC) (See note 9.)
Memory
Cache memory 512-Kbyte Lev el 2 cache memory (built into the CPU)
Type TFT color LCD
Size NSA12: 12.1 inches, NSA15: 15.0 inches
Resolution 1024 x 768 dots
Contrast 300 cd/m2 (typical) (See note 1.)
Viewing angle 130° left to right, 90° up and down
Display panel
Colors displayed 262,144
Type
Cold Cathode Fluorescent Lamps
NSA12 models: 2 lamps , NSA15 models: 4 lamps
Contrast adjustment Three-level software adjustment. (See note 2.)
Backlight not lit detection
The software reads the lamp burnout detection signal from the
inverter. (See note 3.)
Backlight
Service life 50,000 hours min. (See note 4.)
Type Analog resistive type
Effective input area NSA12: 247 mm x 185.5 mm, NSA15: 305 mm x 229 mm
Touch panel
Operating service life
10,000,000 operations (with n on-stop k e y stroking using fingers t o input)
100,000 characters (with non-stop character entry using a stylus to
input)
Serial ports
2 ports conforming to EIA RS-232C f or 9- pin D- SUB ma le connec tors
Ethernet Two 10Base-T/100Base-TX ports for an RJ45 connector
USB ports Four USB 2.0/1.1 ports for USB-type A connectors (See note 7.)
Interface
Memory Card Type I CF Card, 1 slot (bootable drive) (See note 10.)
Expansion slots PCI expansion bus , 1 slot
External input port 3-pin connector port for the UPS power interruption signal Special RAS
board
Status LED indicators 4 (RUN/BATLOW/ERR/DIAG)
Special RAS board
functions
Monitoring Function (alive, startup, and shutdown monitors), Action
on Errors Function (forced shutdown and forced reboot), External
Power Supply Monitor, Motherboard/LCD Operating Time
Measurement, and Log Functions.
RAS functions
Motherboard RAS
functions
Standard PC RAS info, post error logging, post error retry, CMOS
data recovery
POWER indicator Yes (green)
Service life 50,000 hours at 40°C (See note 5.)
Motherboard 5 years at 25°C (NSA-BAT03)
Battery life
RAS board 5 years at 25°C (NSA-BAT03)
Note 1: This contrast value is strictly a reference value at maximum contrast.
2: The contrast cannot be adjusted significantly.
3: It is not the service life, but rather lamp failure due to hardware problems such as a broken
wire that is detected. Backlight not lit detection means both backlight lamps have burnt out.
4: The service life is a guideline for maximum contrast at an ambient temperature around the
cold cathode of 25
°C. It is provided strictly for reference. It varies significantly with the
ambient temperature. The service life will be shorter under extreme (high or low)
temperature conditions and falls off sharply particularly under low-temperature conditions.
5: The service life is a guideline that is provided strictly for reference. It varies with factors
such as the installation location and operating conditions.
6: The file system is formatted in advance with NTFS. Both C and D drives have been created
as partitions. The D drive is used by the OS and RAS Utility to store the event logs.
1-2 Specifications
1-2-2 General Specifications
1-5
1
Overview and Specifications
created as partitions. The D drive is used by the OS and RAS Utility to store the event
logs.
7: When using the two USB ports on the front panel, be sure to us e a connecting cable less
than 3 m in length.
8: The NSA-series Industrial PC does not include a Memory Car d. Order the Memory Cards
specified by OMRON and use them. (The specified Memory Cards have Windows XP
Embedded already installed.) Refer to Appendix 5 Accessories for information on the
different types of Memory Cards.
9: The NSA12-TX11B/S and NSA15-TX11B/S have 256 MB of memory. The
NSA12-TX12B/S and NSB15-TX12B/S have 512 MB.
10: The Memory Card cannot be inserted or removed while the NSA-series Industrial PC is
running. Also, only True IDE Mode is supported.
1-2-2 General Specifications
Item Specifications
Rated supply voltage 24 V DC
Allowable supply voltage range 20.4 V DC to 27.6 V DC (24 V DC±15%)
Power consumption NSA12: 65 W max., NSA15: 75 W max.
Ambient operating temperature 0 to 50°C (See notes 1 and 2.)
Ambient storage temperature −10 to 60°C (See note 2.)
Ambient operating humidity 10% to 80% with no condensation ( See note 2.)
Ambient storage humidity 10% to 85% with no condensation ( See note 2.)
Operating atmosphere
Must be free of corrosive gases.
Must be fairly dust free.
Noise resistance Conforms to EN61000-4-4, power supply line: 2 kV
Vibration resistance (in
operation)
Conforms to JIS C0041, 0.05-mm amplitude at 10 to 55 Hz for 50 min each
in the X, Y, and Z dir ections
Shock resistance (in operation)
Conforms to JIS C0041, 196 m/s
2
three times each in t he X, Y, and Z
directions
Dimensions (excluding
protrusions)
NSA12: 342 mm x 281 mm x 98 mm (W x H x D)
NSA15: 397.5 mm x 296.5 mm x 103 mm (W x H x D)
Weight NSA12: 5 kg max., NSA15: 7 kg max.
Degree of protection Front panel: IP65 or the equivalent (display side only) (See note 3.)
Note 1: The maximum surrounding air temperature rating is 50°C. The ambient operating
temperature may be restricted as described below depending on whether a PCI Board
is installed, the type of Board installed, and the mounting angle of the Unit.
Note 1-1: No PCI Board or One of Following Expansion Boards Installed
• 3G8F7-CLK21-V1 Controller Link Board (hereafter CLK Board)
• CS1PC-PCI01-DRM SYSMAC CS1 Board (hereafter CS1 Board)
(1) The ambient operating temperature is 0 to 25°C when the installation angle is greater than
0° and less than 15° off horizontal (excluding the memory card).
(2) The ambient operating temperature is 0 to 30°C when the installation angle is greater than
15° and less than 45° off horizontal (excluding the memory card).
(3) The ambient operating temperature is 0 to 40°C when the installation angle is greater than
45° and less than 75° off horizontal (excluding the memory card).
(4) The ambient operating temperature is 0 to 50°C when the installation angle is greater than
75° and less than 90° off horizontal (excluding the memory card).
1-2 Specifications
1-2-2 General Specifications
1-6
1
Overview and Specifications
Note 1-2: PCI Board Other Than a CLK Board or a CS1 Board Installed
The internal temperature of the PCI Board will rise 10°C. This may place the
ambient operating temperature at the high end of the range given in *1-1
above. Therefore, set the ambient operating temperature according to the
ambient operating temperature of the PCI Board that is installed. Check prior
to actual use to make sure the PCI Board will operate properly at the selected
ambient operating temperature.
Example: If an Expansion PCI Board with an ambient operating temperature of 0 to 45°C will be
used with the Unit installed at angle greater than 45° and less than 75° off horizontal,
then the ambient operating temperature must be 0 to 35°C because of the 10°C rise
in the internal temperature of the PCI Board.
0°
90°
Installation angle
LCD display side
Note 1-3: Ambient Operating Temperature
The ambient operating temperature is the temperature at a point 50 mm from
the center of the back of the Unit, and it includes the heat generated by the
Unit itself.
50 mm
LCD
side
Back of the Unit
Ambient temperature
measuring point
Loading...