Omron G2RV-SL700, G2RV-SL500 Datasheet

Download

Page 1

Slim Relay

G2RV

The World's First Industrial Slim Relay

• Large plug-in terminals for reliable connection.

• LED indicator and mechanical flag to check operation.

• Transparent housing enables checking relay condition.

• Slim outline to save space.

• Push-in terminals and accessories for easy wiring.

Model Number Structure

■ Model Number Legend

G2RV-SL @ @ @ - @

1234 5

1. Auxiliary Type Designation

SL: Slim relay and socket combination

2. Wire Connection

7: Screw terminals 5: Push-in terminals

3. Relay LED

0: Without LED

Note: LED indicator available on socket.

4. Relay Pushbutton

0: Without pushbutton

5. Input Voltage

Ordering Information

■ List of Models

Classification Enclosure rating Input voltage Type of connection Contact form

SPDT

Plug-in terminals General-purpose Unsealed AC/DC Screw terminals G2RV-SL700

Push-in terminals G2RV-SL500

Relay and Socket Combinations

Input voltage Screw terminals Push-in terminals

12 VDC G2RV-SL700-12 VDC G2RV-SL500-12 VDC

24 VDC G2RV-SL700-24 VDC G2RV-SL500-24 VDC

24 VAC/DC G2RV-SL700-24 VAC/DC G2RV-SL500-24 VAC/DC

48 VAC/DC G2RV-SL700-48 VAC/DC G2RV-SL500-48 VAC/DC

110 VAC G2RV-SL700-110 VAC G2RV-SL500-110 VAC

230 VAC G2RV-SL700-230 VAC G2RV-SL500-230 VAC

Slim Relay G2RV 1

Page 2

Specifications

■ Input Ratings

Rated voltage Rated current

AC DC % of rated voltage AC (VA)

50 Hz 60 Hz

12 VDC --- --- 27.2 mA 80% 10% --- 300 mW ±10%

24 VDC --- --- 13.3 mA --- 300 mW

24 VAC/DC 21.1 mA 22.5 mA 13.0 mA 0.5 VA 300 mW

48 VAC/DC 8.5 mA 9.0 mA 5.2 mA 0.4 VA 250 mW

110 VAC 7.1 mA 7.5 mA --- 0.8 VA ---

230 VAC 7.3 mA 7.9 mA --- 1.7 VA ---

*1) Rated currents are measured at 23 degrees Celsius (ambient)

■ Contact Ratings

Number of poles 1 pole

Load Resistive load

Rated load 6 A at 250 VAC;

Rated carry current 6 A

Max. switching voltage 400 VAC, 125 VDC

Max. switching current 6 A

Max. switching power 1,500 VA

Failure rate (reference value) 10mA at 5VDC (P level)

Note: P level: λ60 = 0.1 x 10-6/operation

(cosφ = 1)

6 A at 30 VDC

180 W

Must operate

voltage

Must release

voltage

Inductive load (cosφ = 0.4, L/R = 7 ms)

2.5 A at 250 VAC; 2 A at 30 VDC

500 VA 60 W

Power consumption Input voltage

Approx.

DC (mW)

Approx.

% of rated voltage

■ Characteristics

Item 1 pole

Contact resistance 100 mΩ max.

Operate (set) time 20 ms max.

Release time 40 ms max.

Max. operating frequency Mechanical: 18,000 operations/hr

Insulation resistance 1,000 MΩ min. (at 500 VDC)

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between coil and contacts*;

Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude)

Shock resistance

Endurance Mechanical: 5,000,000 operations min.

Ambient temperature Operating: –40°C to 55°C (with no icing or condensation)

Ambient humidity Operating: 5% to 85%

Weight Approx. 35 g

Overvoltage category III

Pollution degree 2

Contact material AgSnIn

Creepage distance 7.0 mm

Clearance distance 5.5 mm

Note: Values in the above table are the initial values.

Electrical: 1,800 operations/hr (under rated load)

1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity

Malfunction: 10 to 55 to 10 Hz, 0.50 mm single amplitude (1.0 mm double amplitude)

Destruction: 1,000 m/s Malfunction: 200 m/s2 when energized; 100 m/s2 when not energized

Electrical : 100,000 Typical; NO 70,000 operations min. ; NC 50,000 operations min.

2 Slim Relay G2RV

Page 3

■ Approved Standards

UL 508 (File No. E41643)

Model Contact form Coil ratings Contact ratings Operations

G2RV-SL Series SPDT 12 to 48 VDC

24 to 230 VAC

IEC/VDE (EN 61810)

Contact form Coil ratings Contact ratings Operations

1 pole 12, 24 VDC

24, 48 VAC/DC 110, 230 VAC

250 VAC 6 A (Resistive Load) 30 VDC 6 A (Resistive Load) 400 VAC 2 A (Resistive Load)

50,000 50,000 6,000

6,000

Slim Relay G2RV 3

Page 4

Engineering Data

■ Endurance

1000

operations)

100

30VDC inductive load

(L/R=7ms)

Endurance (x 10

02 4

30VDC resistive load

250VAC inductive load

(cos ϕ = 0.4)

250VAC resistive load

Switching capacity of DC resistive load

10,0

1,0

DC Breaking Current (A)

0,1

20 60 100 140 180 220

Switching voltage (VDC)

Switching current (A)

Typical Operating and Release Time

Model number Operating time (typical) Release time (typical)

G2RV-SL7@@/5@@ DC12 5 ~ 7 ms 5 ~ 8 ms

G2RV-SL7@@/5@@ DC24 5 ~ 7 ms 6 ~ 9 ms

G2RV-SL7@@/5@@ AC/DC24 5 ~ 7 ms 17 ~ 22 ms

G2RV-SL7@@/5@@ AC/DC48 5 ~ 7 ms 22 ~ 30 ms

G2RV-SL7@@/5@@ AC110 12 ~ 15 ms 22 ~ 30 ms

G2RV-SL7@@/5@@ AC230 12 ~ 15 ms 22 ~ 30 ms

Accessories

■ PLC Interface (for G2RV-SL700 series only)

List of Models

Model number Description Connection

P2RVC-8-O-F PLC Output Interface for 8x

G2RV-SL700-series PNP - type

Specifications Electrical schematic P2RVC-8-O-F

Input Rated voltage 30 VAC/VDC max.

Current capacity 0.5 A per channel

2.0 A total current, power supply terminal

Characteristics Ambient

temperature

Overvoltage category

Pollution degree 2

Operating: 0 to 55°C Storage: −20 to 85°C

III

Ribbon cable connector 10 Pole, IEC603/1

4 Slim Relay G2RV

Page 5

■ Cables for PLC Interface P2RVC-8-O-F

P2RV-4-@@@C

Cable to connect CJ1 to 4 x P2RVC-8-O-F

List of Models

Model number Cable length

P2RV-4-100C 1.0 m

P2RV-4-200C 2.0 m

P2RV-4-300C 3.0 m

P2RV-4-500C 5.0 m

4x10 pole IDC mounting to 4 x P2RVC-8-O-F

A1 A2 A3 A4 A5 A6 A7 A8 A9 A100B1B2B3B4 B5 B6 B7 B8 B9 B100

B C D

C1 C2 C3 C4 C5 C6 C7 C8 C9 C10

D1 D2 D3 D4 D5 D6 D7 D8 D9 D10

Cable length as indictad by model number. @@@ = length in centimeters

40 Pole

40 38 36 34 32 30 28 26 22 24 39 37 35 33 31 29 27 25 21 23 20 18 16 14 12 10 8 6 2 4 19 17 15 13 11 9 7513

Split into 4 sections

40 pole IDC mounting to Omron PLC CJ1-OD232

Technical data

Control line

AWG26/0.14 mm

Diameter cable 10.6 mm (one end splits into 4 sections: A, B, C, D

Operating voltage 60 VDC

Continuous current per signal wire 0.5 A

Max. total current, 4 bytes, each 1.0 A

Test voltage 0.5 KV, 50 Hz, 1 min

Operating temperature range -20°C to +50°C

, tin-plated copper

P2RV-A@@@C

Cable, single sided 10 pole IDC connector, to connect to P2RVC-8-O-F

List of Models

Model number Cable length

P2RV-A100C 1.0 m

P2RV-A200C 2.0 m

P2RV-A300C 3.0 m

P2RV-A500C 5.0 m

10 pole IDC mounting to P2RVC-8-O-F

Technical data

Control line

Diameter cable 6.8 mm

Operating voltage 60 VDC

Continuous current per signal wire 0.5 A

Max. total current 1.0 A

Test voltage 0.5 KV, 50 Hz, 1 min

Operating temperature range -20°C to +50°C

WHITE

GREY

PURPLE

BLUE

GREEN

YELLOW

ORANGE

RED

BROWN

BLACK

Open end

AWG26/0.14 mm

10 Pole

, tin-plated copper

Cable length as indictad by model number. @@@ = length in centimeters

Outer isolation removed

Length = 30 cm

Slim Relay G2RV 5

Page 6

P2RV-@@@C-SIM S7/@00

Cables to connect Siemens S7/300 or S7/400 to 4 x P2RVC-8-O-F

List of Models

Model number Cable length PLC type

P2RV-200C-SIM S7/300 2.0 m Siemens S7/300

4x1 Byte

P2RV-250C-SIM S7/300 2.5 m

P2RV-300C-SIM S7/300 3.0 m

P2RV-500C-SIM S7/300 5.0 m

Configuration

P2RV-200C-SIM S7/400 2.0 m Siemens S7/400

P2RV-250C-SIM S7/400 2.5 m

P2RV-300C-SIM S7/400 3.0 m

P2RV-500C-SIM S7/400 5.0 m

4x1 Byte

■ Single Relays for Maintenance

Model Number Legend

G2RV-@ - @ @ @ - @- @

1. Number of Poles

2. Terminals

3. Relay LED

List of Models

G2RV-1-S DC11 G2RV-SL7@@/5@@ DC12

G2RV-1-S DC21 G2RV-SL7@@/5@@ DC24

G2RV-1-S DC48 G2RV-SL7@@/5@@ AC/DC48

12345

1: 1 pole

S: Push-In

Blank: Without LED

Model number Replacement for

G2RV-SL7@@/5@@ AC/DC24

G2RV-SL7@@/5@@ AC110

G2RV-SL7@@/5@@ AC230

4. Relay Pushbutton

Blank: Without pushbutton

5. Contact Material

Blank: AgSnIn

6. Rated Coil Voltage

11 VDC, 21 VDC, and 48 VDC

6 Slim Relay G2RV

Page 7

■ Cross bars

Model Number Legend

P2RVM -@ @

1. Number of Poles 2. Color

020: 2 poles R: Red 030: 3 poles S: Blue 040: 4 poles B: Black 100: 10 poles 200: 20 poles

List of Models

Model number Poles Color

P2RVM-020@ 2

P2RVM-030@ 3

P2RVM-040@ 4

P2RVM-100@ 10

P2RVM-200@ 20

@ select color: R = Red, S=Blue, B=Black

Red (R) Blue (S) Black (B)

Specification

Max current (EN60947-7-1 section 8.3.3 / 1991)

Max. Voltage 400 VAC

Max. Voltage when cutting Cross-bar without using separation

plate or end-bracket

32A

250 VAC

■ Plastic Labels for G2RV Sockets

Model number Box quantity Color

R99-15 for G2RV 1 piece = 1 sheet = 120 labels White

■ Labels (Stickers) for G2RV Sockets

Model number Box quantity Color

R99-16 for G2RV 1 piece = 1 sheet = 484 labels

(stickers)

White

Slim Relay G2RV 7

Page 8

■ Separating Plates

Input circuit

Model number Description

P2RV-S Provides isolation between adjacent relays to

achieve 400 V isolation.

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Complete Unit

G2RV-SL700

106.7 max.

6.2 max.

Five, M2.5 × 6

99.2

70.9

47.2

26.1

92.7 max.

24 V DC Terminal Arrangement/ Internal Connections (Top View)

7.188.9

12 V DC Terminal Arrangement/ Internal Connections (Top View)

Other Coil Voltage Terminal Arrangement/ Internal Connections (Top View)

8 Slim Relay G2RV

Page 9

G2RV-SL500

Input circuit

106.7 max.

Single Relay

G2RV-1-S

6.2 max.

88.9

99.2

82.9

69.8

24.6

97.4 max.

7.1

24 V DC Terminal Arrangement/ Internal Connections (Top View)

12 V DC Terminal Arrangement/ Internal Connections

Other Coil Voltage Terminal Arrangement/ Internal Connections (Top View)

5.2 max.

1.8

30.5 max.

0.5 2.4

5.04 5.04

33 max.

16.2

3.5

322

Terminal Arrangement/ Internal Connections (Bottom View)

Slim Relay G2RV 9

Page 10

Installation

■ Tools

G2RV-SL700 series: Flat-Blade screwdriver should be used for mounting and / or releasing cables.

G2RV-SL500 series: Flat-Blade screwdriver should be used for mounting stranded wires without ferrules and / or releasing cables.

Applicable Screwdriver

● Flat-blade, Parallel-tip, 2.5 mm diameter (3.0 mm max.)

● Flat-blade, Parallel-tip

2.5 dia. (3.0 mm max.)

● Flat-blade, Flared-tip

Cannot be used.

Examples: FACOM AEF.2.5×75E (AEF. 3×75E)

*Chamfering the tip of the driver improves insertion when used as an exclusive tool.

■ Applicable Wires

Applicable Wire Sizes

VESSEL No. 9900-(-)2.5×75 (No. 9900-(-)3×100) WAGO 210-119 WIHA 260/2.5×40 (260/3×50)

G2RV-SL700 Series

Box clamp technology

Wire type Applicable wire size Stripping length

Stranded without ferrules

Stranded with ferrules and plastic collar

Stranded with ferrules without plastic collar

Solid

G2RV-SL500 Series

Push-in technology

Wire type Applicable wire size Stripping length

Stranded without ferrules

Stranded with ferrules and plastic collar

Stranded with ferrules without plastic collar

Solid

0.5 - 2.5 mm

7mm

12 mm

10 Slim Relay G2RV

Page 11

■ Wiring

Screwdriver hole

Wire connection hole

Wire

Use wires of the applicable sizes specified above. The length of the exposed conductor should be 7 mm for a G2RV-SL700 series, 12 mm for a G2RV-SL500 series.

G2RV-SL700

7 mm

G2RV-SL500

12 mm

Fig. 1 Exposed Conductor Length

Wiring Procedure for G2RV-SL500 series

● Wiring

Insert the exposed conductor into the connection hole.

No other tools are required.

Note: In case of wiring stranded wires without ferrules screwdriver

should be inserted before inserting the wire. Screwdriver should be removed after fully insertion of the wire.

● Removing

Insert the specified screwdriver into the release hole.

Removing wire.

Removing screwdriver.

Slim Relay G2RV 11

Page 12

Precautions

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. J11E-EN-02B

Precautions for Connection

• Do not move the screwdriver up, down, or from side to side while it

is inserted in the hole. Doing so may cause damage to internal components (e.g., deformation of the clamp spring or cracks in the housing) or cause deterioration of insulation.

• Do not insert the screwdriver at an angle. Doing so may break the side of socket and result in a short-circuit.

• Do not insert two or more wires in the hole. Wires may come in contact with the spring causing a temperature rise or be subject to sparks.

• If lubricating liquid, such as oil, is present on the tip of screwdriver, the screwdriver may fall out resulting in injury to the operator.

• Inser t the screwdriver into the bottom of the hole. It may not be possible to connect cables properly if the screwdriver is inserted incorrectly.

General Precautions

• Do not use the product if it has been dropped on the ground.

Dropping the product may adversely affect performance.

• Confirm that the socket is securely attached to the mounting track before wiring. If the socket is mounted insecurely it may fall and injure the operator.

• Ensure that the socket is not charged during wiring and maintenance. Not doing so may result in electric shock.

• Do not pour water or cleansing agents on the product. Doing so may result in electric shock.

• Do not use the socket in locations subject to solvents or alkaline chemicals.

• Do not use the socket in locations subject to ultraviolet light (e.g., direct sunlight). Doing so may result in markings fading, rust, corrosion, or resin deterioration.

• Do not dispose the product in fire.

Removing from Mounting Rail

To remove the socket from the mounting rail, insert the tip of screwdriver in the fixture rail, and move it in the direction shown below.

• Inser t the screwdriver along the hole wall as shown below.

Screwdriver

12 Slim Relay G2RV