Omron F3UV-A30, F3UV, F3UV-A03, F3UV-XW11, F3UV-HM User Manual

...

UV Power Monitor F3UV

Monitor the Output of a UV Light Source through an Optical Fiber Cable

Monitors with Optical Fibers

Head Unit withstands temperatures of up to 300°C.

Easy-to-read digital display of measurement values.

Harmful UV light converted to visible light before performing measurements. This feature prevents deterioration of the Amplifier’s light receiving element.

Monitors with Built-in Amplifiers

Deterioration due to UV light prevented by protective structure.

Confirm the output status of the UV light source with an operation indicator.

Filtering Cover (reduces light intensity by 1/6.5) also available.

Ordering Information

Monitors with Built-in Amplifiers

Main Unit

Appearance

Intensity range of incident light

Output

Model number

1 to 30 mW/cm

Analog voltage output (1 to 5 V)

F3UV-A30

0.2 to 3 mW/cm

F3UV-A03

Note:

Does not function as a sensor

Monitors with Optical Fibers

Amplifier

Appearance

Connection

method

Outputs T

ransistor type

Model number

Pre-wired cable

•

Judgement output

• Answer-back output

NPN F3UV-XW11

•

Anal

og current or voltage

output

PNP F3UV-XW41

Head Unit

Appearance

avelength range of

incident light

Max. temperature

Model number

Remarks

200 to 370 nm

300_C (Use at temperatures below

the Fiber Unit’

s rated

operating temperature.)

F3UV-HM

Includes two M8 nuts and one mounting plate.

F3UV

Fiber Units

Compatible

Amplifier Units

Compatible

Head Units

Appearance Max.

temperature

Intensity range of

incident light

(see note)

Model number

Quantity

F3UV-XW11, F3UV-XW41

F3UV-HM

M4 threads, 2 m

300_C

10 to 300 mW/cm2F32-300

M4 threads, 2 m

70_C

10 to 300 mW/cm2F32-70

Note: The

values given are for a standard UV

light source with a central wavelength of 360 nm, measured with a standard illumination meter

(and

for use in combination with the specified Amplifier and Head Unit). The

power range is one for which teaching to 100% is possible.

Accessories (Sold Separately)

Accessories for Monitors with Built-in Amplifiers

Appearance Name Model

number

Protective T

ube (Protects the cord.)

F39-CU1M

Protective Cover (Protects the display.) F39-HU2 1/6.5 Filtering Cover

F39-HU1

Mounting Bracket

F39-L9

Accessories for Monitors with Optical Fibers

Appearance Name Model

number

Quantity

Applicable Fiber Units

Protective Tube (Protects the fiber

F39-FU1M 1 F32-70

F3UV

Specifications

Ratings/Characteristics

Monitors with Built-in Amplifiers (Main Unit)

Item F3UV-A30 F3UV-A03

Incident

light power range

1 to 30 mW/cm

0.2 to 3 mW/cm

Incident light wavelength range

200 to 370 nm

Power indicator

Green LED

Operation indicator

Orange LED (lights with an output between 4 and 5 V)

Sensitivity adjustment

One-turn variable adjuster

Power supply voltage

12 to 24 VDC

±10%

Current consumption

15 mA max.

Response time

300 ms max. 400 ms max.

Output

1 to 5 V (with an of

fset voltage of 0.2 V min.)

Connection impedance

100 kΩ min.

Repetitive accuracy

2% F

.S. max.

emperature drift

0.2% of F

.S./°C max.

Ambient operating illumination4Fluorescent light 1,000 lx max.

Fluorescent light 500 lx max.

Ambient temperature

Operating: –10° to 70°CStorage: –25° to 80

°C

Ambient humidity

Operating:

35% to 85%

Insulation resistance

20 MΩ min. (at 500 VDC)

Dielectric strength

1,000 V AC 50/60 Hz for 1 min

ibration resistance

10 to 150 Hz, 0.1-mm amplitude in X, Y

, and Z directions

(8 minutes of vibration × 10 repetitions= total time 80 minutes)

Shock resistance

150 m/s2 three times each in the ±X, ±Y, and ±Z directions

Degree of protection

Conforms to IEC IP30

Connection method

Pre-wired cable with a standard length of 2 m

eight (packed)

78 g

Material Casing: Die-cast zinc

Window: Synthetic quartz glass

Accessories

Operation Manual

Note: 1.

Using a standard UV light source and UV illumination meter in a power range for which analog output can be set to 5 V

The response time is the rise time of the output signal to 10 to 90%.

3. An

output voltage up to 6 V can be output. Adjust the sensitivity so

that the output is less than 5 V

. The output is 0.2 to 1 V when there

no incident UV light.

This value is the illumination at the receiver window maintaining an of

fset voltage of 1 V max. with the fluorescent light.

F3UV

Accessories (Sold Separately)

Protective Tube (Protects the Cord.)

Item

F39-CU1M

Head connector

Flexible tube

End cap

Ambient

temperature

–40°

to 100°C for operation and storage

(Use within the specified operating temperature range for the Monitor

Ambient humidity

Operating:

35% to 85%

Storage: 35% to 95%

Bending radius

24 ± 5 mm

Max. pulling force

2 N-m max. between the head connector and tube, end cap and tube, or on the tube itself

Crush weight

9.8 N-m max. load on the side of the tube

Material

Head connector

Nickel-plated brass

End cap Tube

Stainless (SUS304)

Attachment M2 screws

Monitors with Optical Fibers

Amplifiers

Item

F3UV-XW11 F3UV-XW41

Power

supply voltage

12 to 24 VDC

±10%

Current consumption

75 mA max.

Outputs

Analog output

Current (4 to 20 mA) or voltage (1 to 5 V) (Monitoring mode or integral mode)

Judgement output

NPN open collector output, 100 mA max.,

PNP open collector output, 100 mA max.,

Answer-back output

residual voltage 1 V max. (Monitoring mode or integral mode)

residual voltage 2 V max. (Monitoring mode or integral mode)

Inputs

Remote teaching input

ON:

0 V short-circuit (current 1 mA max.)

ON:

Power supply voltage short-circuit or 9 to 24 V (open-circuit current: 3 mA max.)

Reset input

OFF:

Open (open or 9 to 24 V)

(p )

OFF:

Open (open or 1.5 V max.)

Protective circuits

Reversed power supply polarity protection and output short-circuit protection

Response time

500 ms max.

Sensitivity setting

eaching function

Indicators Power supply/T

eaching indicator (green/red), Operation indicator (orange), 7-segment digital

percentage display (red), 7-segment digital threshold display (red)

Repetitive accuracy

2% F

.S. max.

Ambient operating illumination2Fluorescent light 1,000 lx max. T

emperature drift

0.1% of F

.S./°C max.

Ambient temperature

Operating: –25 to 55°C (with no icing or condensation) Storage: –40 to 70°C (with no icing or condensation)

Ambient humidity

Operating or storage: 35% to 85%

Insulation resistance

20 MΩ min. (at 500 VDC)

Dielectric strength

1,000 V AC 50/60 Hz between the leads and the case

ibration resistance

10 to 150 Hz, 0.1-mm amplitude or 15 m/s2 in X, Y

, and Z directions each for 2 hours

Shock resistance

150 m/s2 three times each in the X, Y

, and Z directions

Degree of protection

Conforms to IEC 60529 standards IP30

Connection method

Pre-wired cable with a standard length of 2 m

eight (packed)

Approx. 270 g

Material ABS plastic Accessories

Operation Manual

Note: 1.

The response time is the rise time or fall time of the output signal to 10 to 90%.

2. The

ambient operating illumination is the illumination that changes the analog output +5% F

.S. at 200 lx; it is not the operational limit.

3. An

analog output of up to 6 V (or 24 mA) can be output. The output is 1 V (or 4 mA) when there is no incident UV light.

4. F

.S. stands for full scale. For a current output, full scale is 16 mA (4 to 20 mA). For a voltage output, full scale is 4 V (1 to 5 V).

F3UV

5. Definition

of the luminous energy integral: The physical unit of the luminous energy integral is energy (J:

joules) and this value is

calculated

by multiplying the UV intensity (mV)

by the time of exposure (s), but it is dimensionless when this sensor’s analog output

value

(V) is used for the UV intensity

. The integral is measured with an 1

1 ms sampling time.

Head Unit

Item

F3UV-HM

Incident light wavelength range

200 to 370 nm

emperature drift

–0.15%/°C max.

Ambient temperature

Operating or storage: –40° to 300°C (with no icing or condensation)

Ambient humidity

Operating or storage: 35% to 85% (with no icing or condensation)

eight (packed)

Approx. 300 g

ibration resistance

10 to 55 Hz, 0.75-mm amplitude or 10 m/s

Shock resistance

500 m/s

Material

Protective casing

Stainless steel (SUS303)

Fluorescent fiber path

Functional fluoroglass

Accessories

M8 nut and mounting bracket

Fiber Units

Item

Model

F32-300 F32-70

Ambient temperature (with no icing or condensation)

Operating: –40°

to 300

°C

Storage: –40°

to 1

10°C

Operating: –40°

to 70

°C

Storage: –40°

to 70

°C

Ambient humidity (with no icing or condensation)

Operating:

35 to 85%

Storage:

35 to 95%

Bending radius

25 mm min. 25 mm min.

Fiber outer sheathing material

SUS

Black polyethylene

Degree of protection

Conforms to IEC IP67

Standard fiber length

2 m

Note:

The maximum temperature is lower near the amplifier unit. See the Dimensions for details.

Accessories (Sold Separately)

Protective Tube (Protects the Fiber

Item

F39-FU1M

1,000

Head connector

Flexible tube

End cap

Ambient

temperature

–40°

to 150°C for operation and storage

(Keep the ambient temperature within the range specified for the fiber within the tube.)

Ambient humidity

Operating:

35 to 85%

Storage:

35 to 95%

Bending radius

30 mm min.

Max. pulling force

1.5 N-m max. between the head connector and tube, 1.5 N-m max. between the end cap and tube, and 2 N-m on the tube itself

Crush weight

29.4 N-m max. on the tube

Head connector

Nickel-plated brass

End cap

Tube

Stainless (SUS304)

+ 11 hidden pages

Omron F3UV-A30, F3UV, F3UV-A03, F3UV-XW11, F3UV-HM User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual