Omron E3F2-3Z1, E3F2-3Z2, E3F2-R2Z1, E3F2-R2Z2, E3F2-DS10Z1 Datasheet
...
1E3F2-@Z
Cylindrical M18 photoelectric sensor for AC power supply
E3F2-@Z
• 24 to 240 VAC power supply
• UL and CSA approved
Selection Guide
Housing material: Plastic
Note: Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable
(e.g. E3F2-R2Z1 2M or E3F2-R2Z1 5M). For other cable length please contact your OMRON sales representative.
Ordering Information: type list
* Standard cable length is 2 m. Models provided with a 5 m long cable are available. When ordering, specify the cable length by adding the length of the cable
(e.g. E3F2-R2Z1 2M or E3F2-R2Z1 5M). For other cable length please contact your OMRON sales representative.
Sensing method
Appearance Connection Sensing Model
method distance Light-ON Dark-ON
Throughbeam
pre-wired 3 m E3F2-3Z1 E3F2-3Z2
axial
Retroreflective
Non-polarizing
(without MSR function)
axial
pre-wired
0.1 - 2 m
(with
reflector
E39-R1)
E3F2-R2Z1-E E3F2-R2Z2-E
Diffuse
reflective
Fixed sensing distance
Wide-beam characteristics
axial
pre-wired 0.1 m E3F2-DS10Z1-N E3F2-DS10Z2-N
Model
Sensing method,
sensing range
Appearance
Connection
(cable-length)
Control
output
Comments
E3F2-3LZ 2M Through-beam, 3 m axial Pre-wired (2 m)* N.A. Emitter only
E3F2-3DZ1 2M Through-beam, 3 m axial Pre-wired (2 m)* Light-ON Receiver only
E3F2-3DZ2 2M Through-beam, 3 m axial Pre-wired (2 m)* Dark-ON Receiver only
E3F2-3Z1 2M Through-beam, 3 m axial Pre-wired (2 m)* Light-ON Receiver and Emitter
E3F2-3Z2 2M Through-beam, 3 m axial Pre-wired (2 m)* Dark-ON Receiver and Emitter
E3F2-R2Z1 2M Retroreflective, 2 m axial Pre-wired (2 m)* Light-ON Non-polarizing, incl. E39-R1
E3F2-R2Z2 2M Retroreflective, 2 m axial Pre-wired (2 m)* Dark-ON Non-polarizing, incl. E39-R1
E3F2-R2Z1-E 2M Retroreflective, 2 m axial Pre-wired (2 m)* Light-ON Non-polarizing, including reflector
E3F2-R2Z2-E 2M Retroreflective, 2 m axial Pre-wired (2 m)* Dark-ON Non-polarizing, including reflector
E3F2-DS10Z1-N 2M Diffuse reflective, 0.1 m axial Pre-wired (2 m)* Light-ON Wide-beam characteristic
E3F2-DS10Z2-N 2M Diffuse reflective, 0.1 m axial Pre-wired (2 m)* Dark-ON Wide-beam characteristic
2 Standard Photoelectric Sensors
Specifications
Ratings / Characteristics of AC Switching Models
Item
E3F2-3Z1
E3F2-3Z2
E3F2-R2Z1
E3F2-R2Z2
E3F2-DS10Z1
E3F2-DS10Z2
Sensing method Through-beam Non-polarizing Retroreflective
Diffuse reflective
(wide-beam characteristic)
Power supply voltage 24 to 240 VAC ±10 %, 50 / 60 Hz
Current consumption 10 mA max. 5 mA max.
Rated sensing distance
*1
*1
For stable sensing distance in detail, please refer to ”Engineering Data”
3 m
0.1 - 2 m
(with reflector E39-R1)
0.1 m
(5 x 5 cm white mat paper)
Typical sensing distance for different reflector types
*2
*2
Typical sensing distance corresponds to 80 % of the max. sensing distance.
–
E39-R1: 3,4 m
E39-R7: 3,9 m
E39-R8: 5,2 m
–
Detectable object Opaque object: 11 mm min. Opaque object: 56 mm min. Opaque objects
Directional angle 3° to 20° –
Differential travel – 20 % max.
Response time 30 ms max.
Control output AC solid state (SCR) 200 mA max.; residual voltage: 5 V max. at 200 mA
Power reset time 100 ms
Ambient illumination Incandescent lamp: 3000 lx max. Sunlight: 10000 lx max.
Ambient temperature
*3
*3
Operating: -25 to 55 °C / Storage: -30 to 70 °C (with no icing or condensation)
Ambient humidity Operating: 35% to 85% / Storage: 35% to 95% (without condensation)
Insulation resistance 20 M min. at 500 V DC between energized parts and case
Dielectric strength 1500 VAC, 50 / 60 Hz for 1 min between energized parts and case
Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude for 2 hrs each direction (X, Y, Z)
Shock resistance 500 m/sqr (approx. 50 g) for each direction (X, Y, Z)
Enclosure rating
IP67
*4
; NEMA 1, 2, 4; IP69k after DIN 40050 part 9
*4
The enclosure rating IP67 of OMRON internal standards correspond to stricter test requirements than the standard IEC 60529 (refer to chapter “Precautions”)
Light source Infrared LED (880 nm)
Indicators Light incident/power indicator for light source (red)
Sensitivity adjustment Fixed
Connection method
2 m, 5 m pre-wired cable (PVC dia. 4 mm (14 / 0.15)
*5
)
*5
For other cable materials (e.g. PUR) please contact your OMRON sales representative.
Operation mode Light-ON or Dark-ON (fixed)
Circuit protection None
Weight (approx.) 110 g (pre-wired 2 m cable)
Housing materials Plastic (case: ABS; lens: PMMA)
Loading...