Omron E2F DATASHEET
Cylindrical Proximity Sensor in Plastic Housing
E2F
• High quality full body plastic housing for high water
proof requirements
• Polyarylate housing for light chemical resistance
Applications
Detection of bottle caps
Warm water
cleaning
High humidity environment
Ordering Information
Sensors
Model Sensing distance Output specifications
NO NC
M8
Shielded
*1. A different frequency type is available. (E2F-X@@5; e.g.E2F-X5E15)
*2. A short-circuit protection type is available. (E2F-X@Y@-53; e.g. E2F-X5Y1-53) Power supply voltage: 100 to 120 VAC
M12
M18
M30
1.5mm
2mm
5mm
10mm
DC 3-wire NPN E2F-X1R5E1 E2F-X1R5E2
AC 2-wire Models E2F-X1R5Y1 E2F-X1R5Y2
DC 3-wire NPN E2F-X2E1 E2F-X2E2
AC 2-wire Models E2F-X2Y1 E2F-X2Y2
DC 3-wire NPN E2F-X5E1 E2F-X5E2
AC 2-wire Models E2F-X5Y1 E2F-X5Y2
DC 3-wire NPN E2F-X10E1 E2F-X10E2
AC 2-wire Models E2F-X10Y1 E2F-X10Y2
*1 *1
*1
*1
*1
*2
*1
*1
*2
E2F
Model
Operating status
*1
*1
*1
*2
*1
*1
*2
Accessories (Order Separately)
D-29E2F
Rating/performance
Model
Item
Sensing distance 1.5 mm ±10% 2 mm ±10% 5 mm ±10% 10 mm ±10%
Setting distance 0 to 1.2 mm 0 to 1.6 mm 0 to 4 mm 0 to 8 mm
Differential distance 10% max.
Sensing object Ferrous metal (Sensitivity lowers with non-ferrous metals)
Standard sensing
object
Response frequen-
cy*1
Power supply(Oper-
ating voltage range)
Current consumption E models: 17 mA max.
Leakage current Y models: 1.7 mA at 200 VAC
Switch-
Control
output
Indicator lamp E models: Detection indicator (red LED) Y models: Operation indicator (red LED)
Operating status
(with sensing object
approaching)
Protective circuits E models: Reverse connection protection, load short-circuit protection, surge absorber Y models: None
Ambient temperature Operating/Storage: -25° C to 70° C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95%RH
Temperature influ-
ence
Voltage influence
Insulation resistance 50 MΩ min. (at 500 VDC) between current carry parts and case
Dielectric strength E models: 1,000 VAC, 50/60 Hz for 1 min between current carry parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 1,000 m/s2 for 10 times each in X, Y, and Z directions
Protective structure IEC IP67
Connection method Pre-wired models (standard length: 2 m)
Weight (Packed
state)
Material
Accessories Instruction manual
*1. The response frequencies are average values measured on condition that the distance between each sensing object is twice as large as the size of the sensing
object and the sensing distance set is half of the maximum sensing distance.
ing capacity
Residual
voltage
Case
Sensing
surface
Clamp-
ing nut
E2F-X1R5E@
E2F-X1R5Y@
Iron, 8 × 8 × 1 mm Iron, 12 × 12 × 1 mm Iron, 18 × 18 × 1 mm Iron, 30 × 30 × 1 mm
E models: 2 kHz, Y mod-
els: 25 Hz
E models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Y models: 24 to 240 VAC (20 to 264 VAC)
E models: 200 mA max. Y models: 5 to 100 mA E models: 200 mA max. Y models: 5 to 300 mA
E models: 2 V max. (load current: 200 mA with cable length: 2 m)
Y models: Refer to the Specifications
E1, Y1 models: ON
E2, Y2 models: NC
A maximum fluctuation of ±10% max. of sensing distance at 23°C in temperature range of -25°C and 70° C
E models: ±2.5% max. of sensing distance within a range of ±15% of rated power supply voltage Y models: ±1%
max. of sensing distance within a range of ±10% of rated power supply voltage
Approx.40g Approx. 50 g Approx. 130 g Approx. 170 g
Polyallylate resin
E2F-X2E@
E2F-X2Y@
E models: 1.5 kHz, Y mod-
els: 25 Hz
Polyarylate
E2F-X5E@
E2F-X5Y@
E models: 600 Hz, Y mod-
els: 25 Hz
E2F-X10E@
E2F-X10Y@
E models: 400 Hz, Y mod-
els: 25 Hz
D-30 Inductive Sensors
Loading...