OMRON 3S4YR-SCR User Manual
®
Manual Insert IC Card Connector
3S4YR-SCR
Economical, Manual Insert
IC Card Connector
■ Slim profile for compact design
■ ISO 7816 chip location
■ Housing compatible with Omron’s SBR type
for easy upgrade to IC cards
■ Wide operating temperature range
Ordering Information
Magnetic Tracks Supported (R, R/W)
1 2 3 Center JIS II IC Contact Interface Cover Cable Color Part Number
— — — — — ISO 7816 Contact No FPC Black 3S4YR-SCR0J
— — — — — ISO 7816 Contact No FPC Black 3S4YR-SCR0J-002
Note: Consult the IC Card Basics section of this catalog for IC contact descriptions.
■ TYPICAL APPLICATIONS
•ID Control
•Access Control
•Time and Attendance Control • Electronic Purse Systems
• Telecommunications
• Vending Machines
• Data Capturing
• Pre-Paid Systems
Specifications
Part number 3S4YR-SCR
Recommended card type IC Card ISO 7816
Contact resistance 500 mΩ max. between contact springs; 1 Ω max. between two FPC terminal tips
Card inserting force 1 kg max.
Card extracting force Approx. 100 g to 500 g
Card feeding speed 100 cm/sec (39 in/sec) max.
Service life 300,000 passes min.
Load voltage Card set switch 30 VDC max.
Current carrying capacity Card set switch 1 mA to 10 mA
Mounting location Indoors
Ambient temperature Operation -25° to 75°C (-13° to 167°F)
Storage -40° to 85°C (-40° to 185°F)
Ambient humidity Operation 10% to 95% RH without condensation
Storage 10% to 95% RH
Vibration 30 to 200 Hz (3 G) for 25 minutes in each of X, Y and Z directions
Shock 400 m/sec2 (40 G) in each of X, Y and Z directions
Dimensions 78L x 60W x 13.5H mm (3.07L x 2.36W x 0.53H in)
Weight Approx. 40 g (1.42 oz)
3S4YR-SCR 3S4YR-SCR
Engineering Data
■ I/O INFORMATION
3S4YR-SCR FPC Interface Cable
Recommended Molex connectors part numbers 52103-1017,
52030-1010 and 52043-1010.
Pin # Signal Input/Output Description
1 SWC Input Card detection signal
2 SWA Output Card detection signal
3Vcc (C1) ◆ Circuit supply voltage
4 GND (C5) ◆ Zero voltage
5 RST (C2) ◆ Reset signal
6 VPP (C6) ◆ Programming voltage
7 CLK (C3) ◆ Clock signal
8 I/O (C7) ◆ Data input/output
9 RFU ◆ Reserved for future use
10 RFU ◆ Reserved for future use
◆ = Direct IC Contact
Dimensions
Unit: mm (inch)
■ 3S4YR-SCR
60 (2.36)
48 ± 0.2
(1.89 ± 0.01)
FPC
40 ± 1.5
(1.57 ± 0.06)
Three 2.1 (0.08) dia. (B)
for M2.5 tapping screws
48 ± 0.2
(1.89 ± 0.01)
78 ± 0.8 (3.07 ± 0.03)
Three 2.6 (0.10) dia. (A)
for M3 tapping screws
A
A
40 (1.57)
45 (1.77)
B
B
A
21
(0.83)
Chip card
15.2
(0.60)
19
(0.75)
B
13.5
(0.53)
4 (0.16)
3 (0.12)
58
(2.28)
63
(2.48)
4.5 (0.18)
9 (0.35)
0.5 (0.02)
Four R3
52 (2.05)
9
(0.35)
5 (0.20)
Note: Unless otherwise noted,
tolerance is ±0.3 mm.
2
Loading...