Omnitronic KDM-1000 PRO User Manual

USERMANUAL

BEDIENUNGSANLEITUNG

K

D

M

-

1

0

0

0P

R

O

INSTRUMENTMICROPHONE

www.omnitronic.com

www.omnitronic.com

00052368.DOC,Version1.0

Dynamic Microphone

Safety Instructions

SettingintoOperation

Cleaning

Technical Specifications

The OMNITRONIC is a dynamic microphone with hypercardioid characteristic
designed for studio and live applications and is ideally suited for

.

Maintenance and service operations are only to be carried out by authorized dealers. Damage,
caused by manual modifications on this device is not subject to warranty. If the microphone is used
for other purposes than originally intended or if it is not correctly connected, the product may suffer
damages and the guarantee becomes void.
Protect the microphone against humidity and heat. The ambient temperature must always be
between -5° C and +45° C.

For cleaning the microphone only use a dry cloth. Never use chemicals or water.

Type:............................Dynamic

Directivity pattern: ........Hypercardioid

Frequency range:.........20 Hz - 12 kHz

Impedance:..................600

Sensitivity: ...................-85dB

Weight: ........................815g

KDM-1000 PRO

!

!

W

for Bass Instruments

direct pick-up of kick drums and other

low-frequency musical instruments, e.g. trombone and bass amplifier

Screw the holder onto a stand with 1.5 cm thread. For stands with 1 cm thread use the supplied
adapter screw. Connect the microphone via a balanced microphone cable with 3-pin XLR plug to the
XLR microphone input of your audio unit (e.g. mixing console).

Please note: Every information is subject to change without prior notice. 10.07.2009 ©

INSTRUMENTMICROPHONE

USERMANUAL

KDM-1

000PR

O